Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5f53384118e33123d3c87b94cc8835360237698b.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/e19543f2ae978678c2ff814454f07c96ccd02175.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a19cebc0f03588b9627dcaaebe69a9fef28c27f0.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c1626978d2552ef5732dcf9427c903046afb9c1.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also fix comment in intel_pci_config.h (Ilpo)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0e344a72e9be596ac2b8b55a26fd674a96f03cdc.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2d645970a65cfd13e01fd8195b35bf9483ae9c2f.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
v2: Also change Documentation/gpu/i915.rst (Andi)
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8c07233a8234858eb6711140482ef8db4c91cf4.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Tomas Winkler <tomas.winkler@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/461662d528c3f327c81b764b7c883cd4519d8729.1717075103.git.jani.nikula@intel.com
Clean up the top level include/drm directory by grouping all the Intel
specific files under a common subdirectory.
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Airlie <airlied@gmail.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ae224504d99cc6428da6dced9dcde2b7953624ef.1717075103.git.jani.nikula@intel.com
Commit 7627a0edef ("ata: ahci: Drop low power policy board type")
dropped the board_ahci_low_power board type, and instead enables LPM if:
-The AHCI controller reports that it supports LPM (Partial/Slumber), and
-CONFIG_SATA_MOBILE_LPM_POLICY != 0, and
-The port is not defined as external in the per port PxCMD register, and
-The port is not defined as hotplug capable in the per port PxCMD
register.
Partial and Slumber LPM states can either be initiated by HIPM or DIPM.
For HIPM (host initiated power management) to get enabled, both the AHCI
controller and the drive have to report that they support HIPM.
For DIPM (device initiated power management) to get enabled, only the
drive has to report that it supports DIPM. However, the HBA will reject
device requests to enter LPM states which the HBA does not support.
The problem is that Crucial CT240BX500SSD1 drives do not handle low power
modes correctly. The problem was most likely not seen before because no
one had used this drive with a AHCI controller with LPM enabled.
Add a quirk so that we do not enable LPM for this drive, since we see
command timeouts if we do (even though the drive claims to support DIPM).
Fixes: 7627a0edef ("ata: ahci: Drop low power policy board type")
Cc: stable@vger.kernel.org
Reported-by: Aarrayy <lp610mh@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218832
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
The LMTT must be updated whenever we change the VF LMEM configuration.
We missed that step when freeing the whole VF GT config, which could
result in stale PTE in LMTT or LMTT PT object leaks. Fix that.
Fixes: ac6598aed1 ("drm/xe/pf: Add support to configure SR-IOV VFs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527115408.1064-1-michal.wajdeczko@intel.com
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/base/regmap/regmap-kunit.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/r/20240530-md-regmap-kunit-v1-1-976c0f616751@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The conversion from System Reset event to UMP was missing.
Add the entry for a conversion to a proper UMP System message.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://lore.kernel.org/r/20240531123718.13420-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The cs35l41_hda_unbind() function clears the hda_component entry
matching it's index and then dereferences the codec pointer held in the
first element of the hda_component array, this is an issue when the
device index was 0.
Instead use the codec pointer stashed in the cs35l41_hda structure as it
will still be valid.
Fixes: 7cf5ce66df ("ALSA: hda: cs35l41: Add device_link between HDA and cs35l41_hda")
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240531120820.35367-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The codec should be cleared when the amp driver is unbound and when
resuming it should be tested to prevent loading firmware into the device
and ALSA in a partially configured system state.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240531112716.25323-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lets fix a race between mutex_is_lock() and mutex_lock().
<-mutex is not locked
if (!mutex_is_locked(&ictx->lock)) {
unlock = true; <- mutex is locked externaly
mutex_lock(&ictx->lock);
}
Let's use mutex_trylock() that does mutex_is_lock() and mutex_lock()
atomically.
Fix the following cocci warning:
drivers/media/rc/imon.c:1167:1-7: preceding lock on line 1153
Fixes: 23ef710e1a ("[media] imon: add conditional locking in change_protocol")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Infinite log printing occurs during fuzz test:
rc rc1: DViCO FusionHDTV DVB-T USB (LGZ201) as ...
...
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: DViCO FusionHDTV DVB-T USB (LGZ201) successfully initialized ...
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
dvb-usb: bulk message failed: -22 (1/0)
...
dvb-usb: bulk message failed: -22 (1/0)
Looking into the codes, there is a loop in dvb_usb_read_remote_control(),
that is in rc_core_dvb_usb_remote_init() create a work that will call
dvb_usb_read_remote_control(), and this work will reschedule itself at
'rc_interval' intervals to recursively call dvb_usb_read_remote_control(),
see following code snippet:
rc_core_dvb_usb_remote_init() {
...
INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control);
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
...
}
dvb_usb_read_remote_control() {
...
err = d->props.rc.core.rc_query(d);
if (err)
err(...) // Did not return even if query failed
schedule_delayed_work(&d->rc_query_work,
msecs_to_jiffies(rc_interval));
}
When the infinite log printing occurs, the query callback
'd->props.rc.core.rc_query' is cxusb_rc_query(). And the log is due to
the failure of finding a valid 'generic_bulk_ctrl_endpoint'
in usb_bulk_msg(), see following code snippet:
cxusb_rc_query() {
cxusb_ctrl_msg() {
dvb_usb_generic_rw() {
ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev,
d->props.generic_bulk_ctrl_endpoint),...);
if (ret)
err("bulk message failed: %d (%d/%d)",ret,wlen,actlen);
...
}
...
}
By analyzing the corresponding USB descriptor, it shows that the
bNumEndpoints is 0 in its interface descriptor, but
the 'generic_bulk_ctrl_endpoint' is 1, that means user don't configure
a valid endpoint for 'generic_bulk_ctrl_endpoint', therefore this
'invalid' USB device should be rejected before it calls into
dvb_usb_read_remote_control().
To fix it, we need to add endpoint check for 'generic_bulk_ctrl_endpoint'.
And as Sean suggested, the same check and clear halts should be done for
'generic_bulk_ctrl_endpoint_response'. So introduce
dvb_usb_check_bulk_endpoint() to do it for both of them.
Fixes: 4d43e13f72 ("V4L/DVB (4643): Multi-input patch for DVB-USB device")
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
This is available in other places and doesn't belong in the name
of the rc device.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a charging_orange_full_green LED trigger and the trigger is based on
led_mc_trigger_event() which can set an RGB LED when the trigger is
triggered. The LED will show orange when the battery status is charging.
The LED will show green when the battery status is full.
Link: https://lore.kernel.org/linux-leds/f40a0b1a-ceac-e269-c2dd-0158c5b4a1ad@gmail.com/
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
[hdegoede@redhat.com change color order to RGB]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-7-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a new led_mc_trigger_event() function for triggers which want to
change the color of a multi-color LED based on their trigger conditions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-6-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add a new led_mc_set_brightness() function for in kernel color/brightness
changing of multi-color LEDs.
led-class-multicolor can be build as a module and led_mc_set_brightness()
will have the builtin callers, so put led_mc_set_brightness() inside
led-core instead, just like how led_set_brightness() is part of the core
and not of the led-class object.
This also adds a new LED_MULTI_COLOR led_classdev flag to allow
led_mc_set_brightness() to verify that it is operating on a multi-color
LED classdev, avoiding casting the passed in LED classdev to a multi-color
LED classdev, when it actually is not a multi-color LED.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-5-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
The mutex must be initialized before the LED class device is registered
otherwise there is a race where it may get used before it is initialized:
DEBUG_LOCKS_WARN_ON(lock->magic != lock)
WARNING: CPU: 2 PID: 2045 at kernel/locking/mutex.c:587 __mutex_lock
...
RIP: 0010:__mutex_lock+0x7db/0xc10
...
set_brightness_delayed_set_brightness.part.0+0x17/0x60
set_brightness_delayed+0xf1/0x100
process_one_work+0x222/0x5a0
Move the mutex_init() call earlier to avoid this race condition and
switch to devm_mutex_init() to avoid the need to add error-exit
cleanup to probe() if probe() fails later on.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240531114124.45346-4-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
Add an i2c_device_id id_table to match manually instantiated
(non device-tree / ACPI instantiated) KTD202x controllers as
found on some x86 boards.
This table shows the maximum support LED channel for KTD2026
(three LEDs) and KTD-2027 (4 LEDs).
Link: https://www.kinet-ic.com/uploads/KTD2026-7-04h.pdf
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-3-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
This LED controller is installed on a Xiaomi pad2 and it is an x86
platform. The original driver is based on the device tree and can't be
used for this ACPI based system. This patch migrated the driver to use
fwnode to access the properties. Moreover, the fwnode API supports the
device tree so this work won't affect the original implementations.
Signed-off-by: Kate Hsuan <hpa@redhat.com>
Tested-by: André Apitzsch <git@apitzsch.eu> # on BQ Aquaris M5
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240531114124.45346-2-hdegoede@redhat.com
Signed-off-by: Lee Jones <lee@kernel.org>
'tegra_vde_h264_frame' has been unused since
commit 313db7d235 ("media: staging: tegra-vde: Remove legacy UAPI
support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'vb2_dc_conf' has been unused since the original
commit 8f0755c06b ("[media] media: Add mem2mem deinterlacing driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'vpu_malone_frame_buffer' has been unused since the original
commit 145e936380 ("media: amphion: implement malone decoder rpc
interface").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The RGA driver didn't set the sequence numbers of the returned buffers.
Keep track of the CAPTURE and OUTPUT sequence numbers, and set the
sequence numbers in the source and destination buffers.
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If there is any error during probing, we should probably leave the
device in its previous state.
pcim_ will take care of this.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The managed device resource version of the function greatly
simplifies the error handling.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
With Managed Device Resources the error handling is simpler.
The following smatch warning is silenced:
drivers/media/pci/ivtv/ivtv-driver.c: drivers/media/pci/ivtv/ivtv-driver.c:1296 ivtv_probe() warn: 'itv->dec_mem' from ioremap() not released on lines: 1296.
drivers/media/pci/ivtv/ivtv-driver.c: drivers/media/pci/ivtv/ivtv-driver.c:1296 ivtv_probe() warn: 'itv->enc_mem' from ioremap() not released on lines: 1296.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace old style single array member, with flex array.
The struct is allocated, but it seems like there was an over allocation
error:
fw_buf = kmalloc(ALIGN(fw->size + sizeof(struct sms_firmware),
SMS_ALLOC_ALIGNMENT), GFP_KERNEL | coredev->gfp_buf_flags);
This change fixes this cocci warning:
drivers/media/common/siano/smscoreapi.h:669:6-13: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace a single element array with a single element field.
The endianness conversion code seems to support multiple elements. To
avoid changing behavior a pointer to the single element has been used.
This is safer than moving to a flex array, because in that case the
structure size changes.
This fixes the following cocci warning:
drivers/media/common/siano/smscoreapi.h:619:5-13: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace the old-style single element array with a flexible array.
This structure does not seem to be allocated in the code, so there is no
need to change anything else.
The following cocci warning is fixed:
drivers/media/pci/cx18/cx18-scb.h:261:22-29: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace a single element array with a single field.
The following cocci warning is fixed:
drivers/media/platform/xilinx/xilinx-dma.h💯19-22: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Structures that have a single element array as the last field can be
mistaken as a "flex array".
We could replace all the single element arrays in the structure with
single element fields, but this driver prefers to follow the ITU-T H.265
specification, which defines it as an array.
If we introduce a new define N_HRD_PARAMS, we make clear our
intentions.
This fixes this cocci warning:
drivers/media/platform/allegro-dvt/nal-hevc.h:102:14-22: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix typo in subject and commit log]
'debugifc_mask_item' is unused since
commit 681c739944 ("V4L/DVB (6691): pvrusb2: Rework pipeline state
control").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'rc_map_opera_table' has been unused since
commit 2f4f58d689 ("[media] rc: Name RC keymap tables as
rc_map_table").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'gs_reg_fmt_custom' is unused since the original
commit 7aae6e2df1 ("[media] Add GS1662 driver, a video
serializer").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'i2c_device' was added by the original
commit 713d54a8bd ("[media] DiB7090: add support for the dib7090
based")
but is unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'sinit_table' has been unused since the original
commit cd21b33494 ("media: dvb-frontends: add ST STV0910 DVB-S/S2
demodulator frontend driver").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
