'drxjeq_stat' is unused since the original
commit 38b2df95c5 ("[media] drx-j: add a driver for Trident drx-j
frontend").
The name was changed by
commit 57afe2f0bb ("[media] drx-j: Don't use CamelCase")
and it was originally DRXJEQStat_t.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Move the lock/unlock to its own function. It makes the code cleaner and
cocci happier.
Fix the following cocci warning:
drivers/media/usb/go7007/go7007-i2c.c:125:1-7: preceding lock on line 61
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Move the lock logic to it's own function. There is less code duplication
and cocci is much happier.
Fix the following cocci warning:
drivers/media/dvb-frontends/stv090x.c:799:1-7: preceding lock on line 768
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cocci is very confused by unlock-lock a mutex in the middle of a
function.
Factor the schedules out, avoid code duplication and make cocci a bit
happier.
Fix the following cocci warnings:
drivers/media/pci/ivtv/ivtv-fileops.c:223:4-10: preceding lock on line 267
drivers/media/pci/ivtv/ivtv-fileops.c:230:3-9: preceding lock on line 267
drivers/media/pci/ivtv/ivtv-fileops.c:236:4-10: preceding lock on line 267
drivers/media/pci/ivtv/ivtv-fileops.c:245:3-9: preceding lock on line 267
drivers/media/pci/ivtv/ivtv-fileops.c:251:3-9: preceding lock on line 267
drivers/media/pci/ivtv/ivtv-fileops.c:257:3-9: preceding lock on line 267
drivers/media/pci/ivtv/ivtv-fileops.c:272:3-9: preceding lock on line 267
drivers/media/pci/ivtv/ivtv-fileops.c:598:4-10: preceding lock on line 627
drivers/media/pci/ivtv/ivtv-fileops.c:598:4-10: preceding lock on line 689
drivers/media/pci/ivtv/ivtv-fileops.c:606:3-9: preceding lock on line 627
drivers/media/pci/ivtv/ivtv-fileops.c:606:3-9: preceding lock on line 689
drivers/media/pci/ivtv/ivtv-fileops.c:648:3-9: preceding lock on line 627
drivers/media/pci/ivtv/ivtv-fileops.c:648:3-9: preceding lock on line 689
drivers/media/pci/ivtv/ivtv-fileops.c:692:4-10: preceding lock on line 689
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In case DMA fails, 'dma->SG_length' is 0. This value is later used to
access 'dma->SGarray[dma->SG_length - 1]', which will cause out of
bounds access.
Add check to return early on invalid value. Adjust warnings accordingly.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1932dc2f4c ("media: pci/ivtv: switch from 'pci_' to 'dma_' API")
Signed-off-by: Mikhail Kobuk <m.kobuk@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add a new compatible for the rk3588 Rockchip SoC, which also features an
RGA, which is called RGA2 in the TRM Part2. It is the same core as used
on the rk3288 and rk3568, which documents the same RGA2.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
'gamma_curve_segment' looks like it has never been used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516133724.251750-1-linux@treblig.org
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Dotclocks can reach ~1GHz these days, so intel_usecs_to_scanlines(),
with its 32bit maths, is currently limited to a few milliseconds.
I want bigger numbers in DSB selftests, so switch over to 64bit
maths.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528185647.7765-7-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Currently intel_crtc_scanline_offset() is careful to always
return a positive offset. That is not actually necessary
as long as we take care of negative values when applying the
offset in __intel_get_crtc_scanline().
This simplifies intel_crtc_scanline_offset(), and makes
the scanline_offfset arithmetic more symmetric between
the forward (__intel_get_crtc_scanline()) and reverse
(intel_crtc_scanline_to_hw()) directions.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528185647.7765-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The folio error flag is not checked anywhere, so we can remove the calls
to set and clear it.
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-xfs@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-16-willy@infradead.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove conversion to a page and use folio APIs throughout. This includes
a removal of setting the error flag as nobody checks the error flag on
vboxsf folios. This does not include large folio support as we would
have to map each page individually.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-15-willy@infradead.org
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nobody checks the error flag on ufs folios, so stop setting it.
Cc: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-14-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the conversion back to struct page and use the folio APIs instead
of the page APIs. It's probably more trouble than it's worth to support
large folios in romfs, so there are still PAGE_SIZE assumptions in
this function.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-13-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nobody checks the error flag on orangefs folios, so stop setting and
clearing it. We can also use folio_end_read() to simplify
orangefs_read_folio().
Cc: Martin Brandenburg <martin@omnibond.com>
Cc: devel@lists.orangefs.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-11-willy@infradead.org
Tested-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Common code doesn't test the error flag, so we don't need to set it in
nfs. We can use folio_end_read() to combine the setting (or not)
of the uptodate flag and clearing the lock flag.
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Anna Schumaker <anna@kernel.org>
Cc: linux-nfs@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-10-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Nobody checks the error flag on jffs2 folios, so stop setting and
clearing it. We can also remove the call to clear the uptodate
flag; it will already be clear.
Convert one of these into a call to mapping_set_error() which will
actually be checked by other parts of the kernel.
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-9-willy@infradead.org
Tested-by: Zhihao Cheng <chengzhihao1@huawei.com>
Acked-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the use of page APIs, including setting/clearing the error flag
which is never checked on hostfs folios. This does not include support
for large folios as kmap_local_folio() maps only one page at a time.
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-8-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the conversion back into a page and use the folio APIs throughout.
Remove the setting of PG_error instead of converting it; it is unused
by core code or by the rest of isofs, so it serves no purpose here.
Use folio_end_read() to save an atomic operation and unify the two
exit paths.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-7-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the conversion back into a page and use the folio APIs throughout.
Remove the setting of PG_error instead of converting it; it is unused
by core code or by the rest of HPFS, so it serves no purpose here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-6-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the conversion back into a page and use the folio APIs throughout.
Remove the setting of PG_error instead of converting it; it is unused
by core code or by the rest of EFS, so it serves no purpose here.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-5-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the conversion back into a page and use the folio APIs throughout.
Remove the setting of PG_error instead of converting it; it is unused
by core code or by the rest of cramfs, so it serves no purpose here.
Use folio_end_read() to save an atomic operation and unify the two
exit paths.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-4-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is slightly more efficient than separate calls to
folio_mark_uptodate() and folio_unlock(), and it's easier to read.
Get rid of the call to folio_set_error() as nobody will check this flag.
Cc: Jan Harkes <jaharkes@cs.cmu.edu>
Cc: coda@cs.cmu.edu
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-3-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is slightly more efficient than separate calls to
folio_mark_uptodate() and folio_unlock(), and it's easier to read.
Get rid of the call to folio_set_error() as nobody will check this flag.
Cc: Luis de Bethencourt <luisbg@kernel.org>
Cc: Salah Triki <salah.triki@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/r/20240530202110.2653630-2-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
skl_ddb_add_affected_planes() needs the full atomic state. Instead
of digging that out from dubious sources plumb it in explicitly.
The wm counterpart (skl_wm_add_affected_planes()) already does
things in the proper way.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528184945.24083-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Various parts of the cdclk code need access the full atomic
state. Currently it's being dug out via the cdclk_state->base.state
pointer, which is not great as that pointer isn't always valid.
Instead plumb the full atomic state from the top so that it's
clear that it is in fact valid.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240528184945.24083-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The margin debugfs node controls the "Enable Margin Test" field of the
lane margining operations. This field selects between either low or high
voltage margin values for voltage margin test or left or right timing
margin values for timing margin test.
According to the USB4 specification, whether or not the "Enable Margin
Test" control applies, depends on the values of the "Independent
High/Low Voltage Margin" or "Independent Left/Right Timing Margin"
capability fields for voltage and timing margin tests respectively. The
pre-existing condition enabled the debugfs node also in the case where
both low/high or left/right margins are returned, which is incorrect.
This change only enables the debugfs node in question, if the specific
required capability values are met.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Fixes: d0f1e0c2a6 ("thunderbolt: Add support for receiver lane margining")
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Commit:
7bc263840b ("sched/topology: Consolidate and clean up access to a CPU's max compute capacity")
removed rq->cpu_capacity_orig in favor of using arch_scale_freq_capacity()
calls. Export the underlying percpu symbol on x86 so that external trace
point helper modules can be made to work again.
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240530181548.2039216-1-pauld@redhat.com
Fix the warning from 'make C=1 W=1':
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/events/rapl.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20240530-md-arch-x86-events-v1-1-e45ffa8af99f@quicinc.com
On an (old) x86 system with SRAT just covering space above 4Gb:
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0xfffffffff] hotplug
the commit referenced below leads to this NUMA configuration no longer
being refused by a CONFIG_NUMA=y kernel (previously
NUMA: nodes only cover 6144MB of your 8185MB e820 RAM. Not used.
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
was seen in the log directly after the message quoted above), because of
memblock_validate_numa_coverage() checking for NUMA_NO_NODE (only). This
in turn led to memblock_alloc_range_nid()'s warning about MAX_NUMNODES
triggering, followed by a NULL deref in memmap_init() when trying to
access node 64's (NODE_SHIFT=6) node data.
To compensate said change, make memblock_set_node() warn on and adjust
a passed in value of MAX_NUMNODES, just like various other functions
already do.
Fixes: ff6c3d81f2 ("NUMA: optimize detection of memory with no node id assigned by firmware")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1c8a058c-5365-4f27-a9f1-3aeb7fb3e7b2@suse.com
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
The only iommu function call in this driver is a
tegra_dev_iommu_get_stream_id() which does not allocate anything and does
not take any reference.
So there is no point in calling iommu_fwspec_free() in the remove function.
Remove this incorrect function call.
Fixes: 0880bb3b00 ("crypto: tegra - Add Tegra Security Engine driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Akhil R <akhilrajeev@nvidia.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The NEON implementation of crctd10dif is registered with a priority of 100
which is identical to that used by the generic C implementation. Raise the
priority to 150, half way between the PMULL based implementation and the
NEON one, so that it will be preferred over the generic implementation.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The boot-test-finished toggle is only necessary if algapi
is built into the kernel. Do not include this code if it is a module.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Defined CRYPTO_CURVE25519_PPC64 to support X25519 for ppc64le.
Added new module curve25519-ppc64le for X25519.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
X25519 core functions to handle scalar multiplication for ppc64le.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the perl output of x25519-ppc64.pl from CRYPTOGAMs
(see https://github.com/dot-asm/cryptogams/) and added four
supporting functions, x25519_fe51_sqr_times, x25519_fe51_frombytes,
x25519_fe51_tobytes and x25519_cswap.
Signed-off-by: Danny Tsen <dtsen@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'n2_skcipher_request_context' was added in
commit 23a6564a6b ("crypto: niagara2 - switch to skcipher API")
but never used.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove 'hifn_mac_command' and 'hifn_comp_command' which are unused.
They're the same structure as 'hifn_crypt_command' which is used.
(I was tempted to remove
hifn_base_result
hifn_comp_result
hifn_mac_result and
hifn_crypt_result
which are also unused, but they vary, and perhaps they're telling
someone in the future what to look at.)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'tdes_keys' appears unused.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
'dbgfs_u32' appears unused.
Remove it.
(pdma_stat_descr is also unused, but I'm assuming it's
some useful layout description of firmware/hardware
so best left in)
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
