Instead of using a custom function with the SND_SOC_DAPM_MIC widget,
split out the main mic/sub mic bias regulators into a separate widget
using SND_SOC_DAPM_REGULATOR_SUPPLY, and connect them via a routing.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-3-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Samsung devices that share the midas-audio driver use a GPIO-based
approach to headset jack detection, as opposed to using the built-in
jack detection provided by the wm8994 driver. This setup uses two GPIOs
(one for jack detection and another for key detection) and an ADC
channel for determining the jack type or button pressed.
Add DT configuration values that allow for describing these setups.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-2-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices use a separate mic bias supply (also referred to as
"ear mic bias") to enable/disable the headset mic.
Add the DT property headset-mic-bias-supply to allow for specifying
this supply.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://msgid.link/r/20240525-midas-wm1811-gpio-jack-v4-1-f488e03bd8c7@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
During dummy-cycles xSPI will switch GPIO into Hi-Z mode. In that dummy
period voltage on data lines will slowly drop, what can cause
unintentional modebyte transmission. Value send to SPI memory chip will
depend on last address, and clock frequency.
To prevent unforeseen consequences of that behaviour, force send
single modebyte(0x00).
Modebyte will be send only if number of dummy-cycles is not equal
to 0. Code must also reduce dummycycle byte count by one - as one byte
is send as modebyte.
Signed-off-by: Witold Sadowski <wsadowski@marvell.com>
Link: https://msgid.link/r/20240529074037.1345882-2-wsadowski@marvell.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If a process module does not have base config extension then the same
format applies to all of it's inputs and the process->base_config_ext is
NULL, causing NULL dereference when specifically crafted topology and
sequences used.
Fixes: 648fea1284 ("ASoC: SOF: ipc4-topology: set copier output format for process module")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Seppo Ingalsuo <seppo.ingalsuo@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://msgid.link/r/20240529121201.14687-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The Linux Kernel Memory Model [1][2] requires RMW operations that have a
return value to be fully ordered.
BPF atomic operations with BPF_FETCH (including BPF_XCHG and
BPF_CMPXCHG) return a value back so they need to be JITed to fully
ordered operations. POWERPC currently emits relaxed operations for
these.
We can show this by running the following litmus-test:
PPC SB+atomic_add+fetch
{
0:r0=x; (* dst reg assuming offset is 0 *)
0:r1=2; (* src reg *)
0:r2=1;
0:r4=y; (* P0 writes to this, P1 reads this *)
0:r5=z; (* P1 writes to this, P0 reads this *)
0:r6=0;
1:r2=1;
1:r4=y;
1:r5=z;
}
P0 | P1 ;
stw r2, 0(r4) | stw r2,0(r5) ;
| ;
loop:lwarx r3, r6, r0 | ;
mr r8, r3 | ;
add r3, r3, r1 | sync ;
stwcx. r3, r6, r0 | ;
bne loop | ;
mr r1, r8 | ;
| ;
lwa r7, 0(r5) | lwa r7,0(r4) ;
~exists(0:r7=0 /\ 1:r7=0)
Witnesses
Positive: 9 Negative: 3
Condition ~exists (0:r7=0 /\ 1:r7=0)
Observation SB+atomic_add+fetch Sometimes 3 9
This test shows that the older store in P0 is reordered with a newer
load to a different address. Although there is a RMW operation with
fetch between them. Adding a sync before and after RMW fixes the issue:
Witnesses
Positive: 9 Negative: 0
Condition ~exists (0:r7=0 /\ 1:r7=0)
Observation SB+atomic_add+fetch Never 0 9
[1] https://www.kernel.org/doc/Documentation/memory-barriers.txt
[2] https://www.kernel.org/doc/Documentation/atomic_t.txt
Fixes: aea7ef8a82 ("powerpc/bpf/32: add support for BPF_ATOMIC bitwise operations")
Fixes: 2d9206b227 ("powerpc/bpf/32: Add instructions for atomic_[cmp]xchg")
Fixes: dbe6e2456f ("powerpc/bpf/64: add support for atomic fetch operations")
Fixes: 1e82dfaa78 ("powerpc/bpf/64: Add instructions for atomic_[cmp]xchg")
Cc: stable@vger.kernel.org # v6.0+
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Naveen N Rao <naveen@kernel.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240513100248.110535-1-puranjay@kernel.org
Add clock support to the gmii_to_rgmii IP.
Make clk optional to keep DTB backward compatibility.
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add "clocks" bindings for the input clock.
Signed-off-by: Vineeth Karumanchi <vineeth.karumanchi@amd.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
write$nci(r0, &(0x7f0000000740)=ANY=[@ANYBLOB="610501"], 0xf)
Syzbot constructed a write() call with a data length of 3 bytes but a count value
of 15, which passed too little data to meet the basic requirements of the function
nci_rf_intf_activated_ntf_packet().
Therefore, increasing the comparison between data length and count value to avoid
problems caused by inconsistent data length and count.
Reported-and-tested-by: syzbot+71bfed2b2bcea46c98f2@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update the maintainer of starfive dwmac driver.
Signed-off-by: Minda Chen <minda.chen@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not issue "can't read the data register offset!" when gpio,syscon-dev
is not set albeit unneeded. gpio-syscon is used with rk3328 chip, but
this iomem region is documented in
Documentation/devicetree/bindings/gpio/rockchip,rk3328-grf-gpio.yaml and
does not require gpio,syscon-dev setting.
Signed-off-by: Etienne Buira <etienne.buira@free.fr>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/Zktwd4Y8zu6XSGaE@Z926fQmE5jqhFMgp6
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
libaokun@huaweicloud.com <libaokun@huaweicloud.com> says:
We've been testing ondemand mode for cachefiles since January, and we're
almost done. We hit a lot of issues during the testing period, and this
patch set fixes some of the issues related to ondemand requests.
The patches have passed internal testing without regression.
The following is a brief overview of the patches, see the patches for
more details.
Patch 1-5: Holding reference counts of reqs and objects on read requests
to avoid malicious restore leading to use-after-free.
Patch 6-10: Add some consistency checks to copen/cread/get_fd to avoid
malicious copen/cread/close fd injections causing use-after-free or hung.
Patch 11: When cache is marked as CACHEFILES_DEAD, flush all requests,
otherwise the kernel may be hung. since this state is irreversible, the
daemon can read open requests but cannot copen.
Patch 12: Allow interrupting a read request being processed by killing
the read process as a way of avoiding hung in some special cases.
fs/cachefiles/daemon.c | 3 +-
fs/cachefiles/internal.h | 5 +
fs/cachefiles/ondemand.c | 217 ++++++++++++++++++++++--------
include/trace/events/cachefiles.h | 8 +-
4 files changed, 176 insertions(+), 57 deletions(-)
* patches from https://lore.kernel.org/r/20240522114308.2402121-1-libaokun@huaweicloud.com:
cachefiles: make on-demand read killable
cachefiles: flush all requests after setting CACHEFILES_DEAD
cachefiles: Set object to close if ondemand_id < 0 in copen
cachefiles: defer exposing anon_fd until after copy_to_user() succeeds
cachefiles: never get a new anonymous fd if ondemand_id is valid
cachefiles: add spin_lock for cachefiles_ondemand_info
cachefiles: add consistency check for copen/cread
cachefiles: remove err_put_fd label in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_daemon_read()
cachefiles: fix slab-use-after-free in cachefiles_ondemand_get_fd()
cachefiles: remove requests from xarray during flushing requests
cachefiles: add output string to cachefiles_obj_[get|put]_ondemand_fd
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replacing wait_for_completion() with wait_for_completion_killable() in
cachefiles_ondemand_send_req() allows us to kill processes that might
trigger a hunk_task if the daemon is abnormal.
But now only CACHEFILES_OP_READ is killable, because OP_CLOSE and OP_OPEN
is initiated from kworker context and the signal is prohibited in these
kworker.
Note that when the req in xas changes, i.e. xas_load(&xas) != req, it
means that a process will complete the current request soon, so wait
again for the request to be completed.
In addition, add the cachefiles_ondemand_finish_req() helper function to
simplify the code.
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-13-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In ondemand mode, when the daemon is processing an open request, if the
kernel flags the cache as CACHEFILES_DEAD, the cachefiles_daemon_write()
will always return -EIO, so the daemon can't pass the copen to the kernel.
Then the kernel process that is waiting for the copen triggers a hung_task.
Since the DEAD state is irreversible, it can only be exited by closing
/dev/cachefiles. Therefore, after calling cachefiles_io_error() to mark
the cache as CACHEFILES_DEAD, if in ondemand mode, flush all requests to
avoid the above hungtask. We may still be able to read some of the cached
data before closing the fd of /dev/cachefiles.
Note that this relies on the patch that adds reference counting to the req,
otherwise it may UAF.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-12-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
If copen is maliciously called in the user mode, it may delete the request
corresponding to the random id. And the request may have not been read yet.
Note that when the object is set to reopen, the open request will be done
with the still reopen state in above case. As a result, the request
corresponding to this object is always skipped in select_req function, so
the read request is never completed and blocks other process.
Fix this issue by simply set object to close if its id < 0 in copen.
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-11-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
After installing the anonymous fd, we can now see it in userland and close
it. However, at this point we may not have gotten the reference count of
the cache, but we will put it during colse fd, so this may cause a cache
UAF.
So grab the cache reference count before fd_install(). In addition, by
kernel convention, fd is taken over by the user land after fd_install(),
and the kernel should not call close_fd() after that, i.e., it should call
fd_install() after everything is ready, thus fd_install() is called after
copy_to_user() succeeds.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-10-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Now every time the daemon reads an open request, it gets a new anonymous fd
and ondemand_id. With the introduction of "restore", it is possible to read
the same open request more than once, and therefore an object can have more
than one anonymous fd.
If the anonymous fd is not unique, the following concurrencies will result
in an fd leak:
t1 | t2 | t3
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd0
ondemand_id = object_id0
------ restore ------
cachefiles_ondemand_restore
// restore REQ_A
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
load->fd = fd1
ondemand_id = object_id1
process_open_req(REQ_A)
write(devfd, ("copen %u,%llu", msg->msg_id, size))
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
process_open_req(REQ_A)
// copen fails due to no req
// daemon close(fd1)
cachefiles_ondemand_fd_release
// set object closed
-- umount --
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object
cachefiles_ondemand_init_close_req
if (!cachefiles_ondemand_object_is_open(object))
return -ENOENT;
// The fd0 is not closed until the daemon exits.
However, the anonymous fd holds the reference count of the object and the
object holds the reference count of the cookie. So even though the cookie
has been relinquished, it will not be unhashed and freed until the daemon
exits.
In fscache_hash_cookie(), when the same cookie is found in the hash list,
if the cookie is set with the FSCACHE_COOKIE_RELINQUISHED bit, then the new
cookie waits for the old cookie to be unhashed, while the old cookie is
waiting for the leaked fd to be closed, if the daemon does not exit in time
it will trigger a hung task.
To avoid this, allocate a new anonymous fd only if no anonymous fd has
been allocated (ondemand_id == 0) or if the previously allocated anonymous
fd has been closed (ondemand_id == -1). Moreover, returns an error if
ondemand_id is valid, letting the daemon know that the current userland
restore logic is abnormal and needs to be checked.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-9-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The following concurrency may cause a read request to fail to be completed
and result in a hung:
t1 | t2
---------------------------------------------------------
cachefiles_ondemand_copen
req = xa_erase(&cache->reqs, id)
// Anon fd is maliciously closed.
cachefiles_ondemand_fd_release
xa_lock(&cache->reqs)
cachefiles_ondemand_set_object_close(object)
xa_unlock(&cache->reqs)
cachefiles_ondemand_set_object_open
// No one will ever close it again.
cachefiles_ondemand_daemon_read
cachefiles_ondemand_select_req
// Get a read req but its fd is already closed.
// The daemon can't issue a cread ioctl with an closed fd, then hung.
So add spin_lock for cachefiles_ondemand_info to protect ondemand_id and
state, thus we can avoid the above problem in cachefiles_ondemand_copen()
by using ondemand_id to determine if fd has been closed.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-8-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This prevents malicious processes from completing random copen/cread
requests and crashing the system. Added checks are listed below:
* Generic, copen can only complete open requests, and cread can only
complete read requests.
* For copen, ondemand_id must not be 0, because this indicates that the
request has not been read by the daemon.
* For cread, the object corresponding to fd and req should be the same.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-7-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The err_put_fd label is only used once, so remove it to make the code
more readable. In addition, the logic for deleting error request and
CLOSE request is merged to simplify the code.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-6-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0xb41/0xb60
Read of size 8 at addr ffff888122e84088 by task ondemand-04-dae/963
CPU: 13 PID: 963 Comm: ondemand-04-dae Not tainted 6.8.0-dirty #564
Call Trace:
kasan_report+0x93/0xc0
cachefiles_ondemand_daemon_read+0xb41/0xb60
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 116:
kmem_cache_alloc+0x140/0x3a0
cachefiles_lookup_cookie+0x140/0xcd0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 792:
kmem_cache_free+0xfe/0x390
cachefiles_put_object+0x241/0x480
fscache_cookie_state_machine+0x5c8/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_withdraw_cookie
cachefiles_ondemand_clean_object(object)
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
msg->object_id = req->object->ondemand->ondemand_id
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
copy_to_user(_buffer, msg, n)
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
------ close(fd) ------
cachefiles_ondemand_fd_release
cachefiles_put_object
cachefiles_put_object
kmem_cache_free(cachefiles_object_jar, object)
REQ_A->object->ondemand->ondemand_id
// object UAF !!!
When we see the request within xa_lock, req->object must not have been
freed yet, so grab the reference count of object before xa_unlock to
avoid the above issue.
Fixes: 0a7e54c195 ("cachefiles: resend an open request if the read request's object is closed")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-5-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
We got the following issue in a fuzz test of randomly issuing the restore
command:
==================================================================
BUG: KASAN: slab-use-after-free in cachefiles_ondemand_daemon_read+0x609/0xab0
Write of size 4 at addr ffff888109164a80 by task ondemand-04-dae/4962
CPU: 11 PID: 4962 Comm: ondemand-04-dae Not tainted 6.8.0-rc7-dirty #542
Call Trace:
kasan_report+0x94/0xc0
cachefiles_ondemand_daemon_read+0x609/0xab0
vfs_read+0x169/0xb50
ksys_read+0xf5/0x1e0
Allocated by task 626:
__kmalloc+0x1df/0x4b0
cachefiles_ondemand_send_req+0x24d/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
Freed by task 626:
kfree+0xf1/0x2c0
cachefiles_ondemand_send_req+0x568/0x690
cachefiles_create_tmpfile+0x249/0xb30
cachefiles_create_file+0x6f/0x140
cachefiles_look_up_object+0x29c/0xa60
cachefiles_lookup_cookie+0x37d/0xca0
fscache_cookie_state_machine+0x43c/0x1230
[...]
==================================================================
Following is the process that triggers the issue:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
cachefiles_ondemand_get_fd
copy_to_user(_buffer, msg, n)
process_open_req(REQ_A)
------ restore ------
cachefiles_ondemand_restore
xas_for_each(&xas, req, ULONG_MAX)
xas_set_mark(&xas, CACHEFILES_REQ_NEW);
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
REQ_A = cachefiles_ondemand_select_req
write(devfd, ("copen %u,%llu", msg->msg_id, size));
cachefiles_ondemand_copen
xa_erase(&cache->reqs, id)
complete(&REQ_A->done)
kfree(REQ_A)
cachefiles_ondemand_get_fd(REQ_A)
fd = get_unused_fd_flags
file = anon_inode_getfile
fd_install(fd, file)
load = (void *)REQ_A->msg.data;
load->fd = fd;
// load UAF !!!
This issue is caused by issuing a restore command when the daemon is still
alive, which results in a request being processed multiple times thus
triggering a UAF. So to avoid this problem, add an additional reference
count to cachefiles_req, which is held while waiting and reading, and then
released when the waiting and reading is over.
Note that since there is only one reference count for waiting, we need to
avoid the same request being completed multiple times, so we can only
complete the request if it is successfully removed from the xarray.
Fixes: e73fa11a35 ("cachefiles: add restore command to recover inflight ondemand read requests")
Suggested-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-4-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Even with CACHEFILES_DEAD set, we can still read the requests, so in the
following concurrency the request may be used after it has been freed:
mount | daemon_thread1 | daemon_thread2
------------------------------------------------------------
cachefiles_ondemand_init_object
cachefiles_ondemand_send_req
REQ_A = kzalloc(sizeof(*req) + data_len)
wait_for_completion(&REQ_A->done)
cachefiles_daemon_read
cachefiles_ondemand_daemon_read
// close dev fd
cachefiles_flush_reqs
complete(&REQ_A->done)
kfree(REQ_A)
xa_lock(&cache->reqs);
cachefiles_ondemand_select_req
req->msg.opcode != CACHEFILES_OP_READ
// req use-after-free !!!
xa_unlock(&cache->reqs);
xa_destroy(&cache->reqs)
Hence remove requests from cache->reqs when flushing them to avoid
accessing freed requests.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-3-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jia Zhu <zhujia.zj@bytedance.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This lets us see the correct trace output.
Fixes: c838305450 ("cachefiles: notify the user daemon when looking up cookie")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Link: https://lore.kernel.org/r/20240522114308.2402121-2-libaokun@huaweicloud.com
Acked-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Merge series from Prajna Rajendra Kumar <prajna.rajendrakumar@microchip.com>:
The Microchip PolarFire SoC SPI "hard" controller supports eight
chip selects. However, only one chip select is physically wired.
Therefore, use GPIO descriptors to configure additional chip select
lines.
'max77503_dev' is unused since the original
commit a0c543bdf4 ("regulator: max77503: Add ADI MAX77503 support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://msgid.link/r/20240528174659.53022-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
With the deferred probe mechanism used by the gfx/display subsystem,
we see this message repeated for no good reason. Print the information
only once.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://msgid.link/r/20240527193936.165702-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 94d2d08974 ("ASoC: Intel: Boards: tgl_max98373: add dai_trigger
function") disables speaker pins in late_probe to allow DSP to enter
low power state. Add same code to sof_da7219 driver.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since maxim-module could detect tdm slot number in runtime, we could
remove local ops and use maxim-module to handle max98373.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rewrite max_98373_hw_params() function to get tdm slot number from
topology in runtime because earlier platforms use 4-slot setting
instead of 8. Also check if the interface is configured in TDM mode
before calling snd_soc_dai_set_tdm_slot() function.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support the new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS in
sof_ipc4_dai_get_param() function to get the tdm slot number of
specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Support the new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS in
sof_ipc3_dai_get_param() function to get the tdm slot number of
specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An new interface, sof_dai_get_tdm_slots(), is added for machine driver
to get tdm slot number from topology. The dai_get_param() callback
needs to support new parameter type SOF_DAI_PARAM_INTEL_SSP_TDM_SLOTS
by returning the tdm slot number of specific SSP port.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are going to extend the dai_get_clk() callback function to retrieve
other dai-specific settings like tdm slot number, not just mclk/bclk
frequencies. Revisit functions and macros related to the callback and
replace the string 'clk' with 'param' to reflect the ongoing change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add quirks for some new Dell laptops using Cirrus amplifiers in a bridge
configuration.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add some new match table entries on Arrowlake and Raptorlake for some
coming cs42l43 laptops.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
No reason for cs42l43 and cs35l56 not to offer pin switch controls for
the headphones and speakers, add these controls.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_dai_by_name() is not used anymore. Remove it.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The dai is passed from the parameter. We don't need to find the dai
by name.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240527193552.165567-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Miquel Raynal <miquel.raynal@bootlin.com>:
I am working on spi-nand continuous read support, which lead me to check
what spi controllers were capable of.
>From a caller (and reviewer) point of view, distinguishing between error
cases has been proven useful, especially between two conditions:
- the request is totally unsupported and will never work
- the request is typically out of range somehow but a subsequent call
with corrected parameters might work
So while I was statically reading the various drivers, I attempted to
clarify these situations and thought it might be nice to have this
upstream as well.
As ENOTSUPP is not a SUSV4 code and previous series have already been
merged to reduce its use, I also converted these few cases to EOPNOTSUP
instead, but if anybody doesn't like these changes, it can be dropped.
Merge series from Ji Sheng Teoh <jisheng.teoh@starfivetech.com>:
The first patch adds optional reset control to support assertion and
deassertion of reset signal to properly bring the SPI device into an
operating condition.
The second patch documents the optional reset control into dt-bindings.
