flush_gpu_tlb may be called from another thread while
device_gpu_recover is running.
Both of these threads access registers through the VF
RLCG interface during VF Full Access. Add a lock around this interface
to prevent race conditions between these threads.
Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com>
Reviewed-by: Zhigang Luo <zhigang.luo@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
With commit 89773b8559
("drm/amdkfd: Let VRAM allocations go to GTT domain on small APUs")
big and small APU "VRAM" handling in KFD was unified. Since AMD_IS_APU
is set for both big and small APUs, we can simplify the checks in
the code.
v2: clean up a few more places (Lang)
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Lang Yu <Lang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit 28ebbb4981.
Revert this commit as apparently the LLVM code to take advantage of
this never landed.
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Feifei Xu <feifei.xu@amd.com>
Allocate some memory, send the address in chunks to dmub, and finally
ask it to copy the bounding box data into the newly allocated memory.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
New commands for enabling copy of DC bounding box values from VBIOS DMUB
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move creation of CGS device node and the DAL allocation list from
amdgpu_dm_init() to dm_sw_init() which runs before dmub's sw init hook.
This is required for communicating with the VBIOS DMUB image from the
VBIOS that was loaded for early pre-os boot.
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When ODM slice happens on DCN401, there is a null pointer exception
caused by that. This commit address this issue by checking if the
required data structures are initialized.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
All the DC_FP_START/END should be used before call anything from DML2,
for this reason, the use of those guards inside DML it is not correct.
This commit removes two unnecessary DC_FP_START/END from a dml2
function.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DCN401 is using DCN 320 headers, which does not have all the right
registers for DCN401. This commit just replace DCN320 includes with the
one from DCN410.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop the extra HPD irq entry for DCN401.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Most of the DML code is generated, and it is necessary to update some
parts of it from time to time. This commit brings the latest generated
code for DML 2.1.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
cleaning up the code refactor requires hubp to be in its own component.
[how]
move all files under newly created hubp folder and fixing the makefiles.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Pinninti <bpinnint@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit removes some unused code with the required adjustments.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Enable sharpener support for DCN401
[How]
- Removed memcmp check that was preventing ISHARP from being enabled.
- Add missing ISHARP register defines, masks, and writes.
- Add programming of Blur and Scale coefficients.
- Program FMT_MODE and NLDELTA registers based on LLS_PREF and pixel
- format
- Only enable ISHARP for YUV420
- Add disabling of ISHARP
- Add debug flags and registry keys for debugging ISHARP.
- Set default to medium level
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Incorrect cursor position calculation in some scenarios. Also for
mirror and rotation cases.
[How]
Fix for incorrect cursor position. Added new test scenarios for diags
cursor test. Updated CRC for few of the diags cursor test scenarios.
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Sridevi <sarvinde@amd.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fix build error on ppc64:
dev_in_maps.c: In function ‘get_file_dev_and_inode’:
dev_in_maps.c:60:59: error: format ‘%llu’ expects argument of type
‘long long unsigned int *’, but argument 7 has type ‘__u64 *’ {aka ‘long
unsigned int *’} [-Werror=format=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix warnings like:
openat2_test.c: In function ‘test_openat2_flags’:
openat2_test.c:303:73: warning: format ‘%llX’ expects argument of type
‘long long unsigned int’, but argument 5 has type ‘__u64’ {aka ‘long
unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix warnings like:
test_cachestat.c: In function ‘print_cachestat’:
test_cachestat.c:30:38: warning: format ‘%llu’ expects argument of
type ‘long long unsigned int’, but argument 2 has type ‘__u64’ {aka
‘long unsigned int’} [-Wformat=]
By switching to unsigned long long for u64 for ppc64 builds.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The kprobe_eventname.tc test checks if a function with .isra. can have a
kprobe attached to it. It loops through the kallsyms file for all the
functions that have the .isra. name, and checks if it exists in the
available_filter_functions file, and if it does, it uses it to attach a
kprobe to it.
The issue is that kprobes can not attach to functions that are listed more
than once in available_filter_functions. With the latest kernel, the
function that is found is: rapl_event_update.isra.0
# grep rapl_event_update.isra.0 /sys/kernel/tracing/available_filter_functions
rapl_event_update.isra.0
rapl_event_update.isra.0
It is listed twice. This causes the attached kprobe to it to fail which in
turn fails the test. Instead of just picking the function function that is
found in available_filter_functions, pick the first one that is listed
only once in available_filter_functions.
Cc: stable@vger.kernel.org
Fixes: 604e354823 ("selftests/ftrace: Select an existing function in kprobe_eventname test")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Update required config options for running all tests.
This also sorts the config entries alphabetically.
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The dynevent/test_duplicates.tc test case uses `syscalls/sys_enter_openat`
event for defining eprobe on it. Since this `syscalls` events depend on
CONFIG_FTRACE_SYSCALLS=y, if it is not set, the test will fail.
Add the event file to `required` line so that the test will return
`unsupported` result.
Fixes: 297e1dcdca ("selftests/ftrace: Add selftest for testing duplicate eprobes and kprobes")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The pcmtest driver tests use the kselftest harness which requires that
_GNU_SOURCE is defined but nothing causes it to be defined. Since the
KHDR_INCLUDES Makefile variable has had the required define added let's
use that, this should provide some futureproofing.
Fixes: daef47b89e ("selftests: Compile kselftest headers with -D_GNU_SOURCE")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
"reg" is not documented nor used for st,mlahb, so drop it from the
example to fix the warning:
Documentation/devicetree/bindings/arm/stm32/st,mlahb.example.dtb: ahb@38000000: Unevaluated properties are not allowed ('reg' was unexpected)
from schema $id: http://devicetree.org/schemas/arm/stm32/st,mlahb.yaml#
Since "reg" is dropped, the unit-address must be as well.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240523154208.2457864-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Commit 6bc6bf8a94 ("dt-bindings: arm: sunxi: document Anbernic RG35XX
handheld gaming device variants") mistakenly added '-' on each line
which created empty (i.e. description only) schemas matching anything.
This causes validation to fail on all the root node compatibles as
there are multiple oneOf clauses passing.
Fixes: 6bc6bf8a94 ("dt-bindings: arm: sunxi: document Anbernic RG35XX handheld gaming device variants")
Reviewed-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240503154402.967632-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The dev_warn to notify about a spurious interrupt was introduced with
the reasoning that these are unexpected. However spurious interrupts
tend to trigger continously and the error message on the serial console
prevents that the core's detection of spurious interrupts kicks in
(which disables the irq) and just floods the console.
Fixes: c64e7efe46 ("spi: stm32: make spurious and overrun interrupts visible")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://msgid.link/r/20240521105241.62400-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
fix typo "info.ue_count" in amdgpu_ras_aca_sysfs_read() function.
Fixes: 865d339763 ("drm/amdgpu: add aca deferred error type support")
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pointer parent may be NULLed by the function amdgpu_vm_pt_parent.
To make the code more robust, check the pointer parent.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMD_PG_SUPPORT_VCN_DPG is needed for secure parts
and should/can be enabled by now.
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Sonny Jiang <sonjiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It was an enablement vehicle for MES 11 and was never
productized. Remove it.
v2: drop additional checks in the GFX10 code.
v3: drop mes_api_def.h
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Convert a variable sized array from [1] to [].
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use current speed/width on devices which don't support
dynamic PCIe switching.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3289
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Merge series from Alina Yu <alina_yu@richtek.com>:
There are two types of LDO VOUT: fixed voltage mode and adjustable voltage mode.
As the fixed voltage for the LDO is outside the range of the adjustable voltage mode,
the constraints for this scenario are not suitable to represent both modes.
Therefore, A property is added to specify the fixed LDO VOUT.
In this version, a software bug has been fixed.
rtq2208_ldo_match is no longer a local variable.
It prevents invalid memory access when devm_of_regulator_put_matches is called.
We don't have to use exact names of the enumerators as the
potentially user-facing platform names. When constructing
platform descriptor fields, use the unique platform tag and
add the XE_ prefix only to the generated enum field.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521142257.756-3-michal.wajdeczko@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
When an inquiry of the current protocol via UMP Stream Configuration
message fails by some reason, we may leave the current protocol
undefined, which may lead to unexpected behavior. Better to assume a
valid protocol found in the protocol capability bits instead.
For a device that doesn't support the UMP v1.2 feature, it won't reach
to this code path, and USB MIDI GTB descriptor would be used for
determining the protocol, instead.
Link: https://lore.kernel.org/r/20240529164723.18309-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a UMP Stream Configuration message is received, the driver tries
to switch the protocol, but there was no sanity check of the protocol,
hence it can pass an invalid value. Add the check and bail out if a
wrong value is passed.
Fixes: a798076837 ("ALSA: ump: Add helper to change MIDI protocol")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240529164723.18309-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This reverts commit 681ce86235.
We gave it a try, but it turns out the kernel test robot did in fact
find performance regressions for it, so we'll have to look at the more
involved alternative fixes for Yafang Shao's Elasticsearch load issue.
There were several alternatives discussed, they just weren't as simple
as this first attempt.
The report is of a -7.4% regression of filebench.sum_operations/s, which
appears significant enough to trigger my "this patch may get reverted if
somebody finds a performance regression on some other load" rule.
So it's still the case that we should end up deleting dentries more
aggressively - or just be better at pruning them later - but it needs a
bit more finesse than this simple thing.
Link: https://lore.kernel.org/all/202405291318.4dfbb352-oliver.sang@intel.com/
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- some trace event was dumping uninitialized values
- a missing lock somewhere that was thought to have exclusive access,
and it turned out not to
-----BEGIN PGP SIGNATURE-----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=7DGy
-----END PGP SIGNATURE-----
Merge tag '9p-for-6.10-rc2' of https://github.com/martinetd/linux
Pull 9p fixes from Dominique Martinet:
"Two fixes headed to stable trees:
- a trace event was dumping uninitialized values
- a missing lock that was thought to have exclusive access, and it
turned out not to"
* tag '9p-for-6.10-rc2' of https://github.com/martinetd/linux:
9p: add missing locking around taking dentry fid list
net/9p: fix uninit-value in p9_client_rpc()
The 'dt_binding_check' target shouldn't depend on the kernel
configuration, but it has since commit 604a57ba97 ("dt-bindings:
kbuild: Add separate target/dependency for processed-schema.json").
That is because CHECK_DT_BINDING make variable was dropped, but
scripts/dtc/Makefile was missed. The CHECK_DTBS variable can be used
instead.
Reported-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Fixes: 604a57ba97 ("dt-bindings: kbuild: Add separate target/dependency for processed-schema.json")
Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 13e1df0928 ("kheaders: explicitly validate existence of cpio
command") added an explicit check for `cpio` using `type`.
However, `type` in `dash` (which is used in some popular distributions
and base images as the shell script runner) prints the missing message
to standard output, and thus no error is printed:
$ bash -c 'type missing >/dev/null'
bash: line 1: type: missing: not found
$ dash -c 'type missing >/dev/null'
$
For instance, this issue may be seen by loongarch builders, given its
defconfig enables CONFIG_IKHEADERS since commit 9cc1df421f ("LoongArch:
Update Loongson-3 default config file").
Therefore, use `command -v` instead to have consistent behavior, and
take the chance to provide a more explicit error.
Fixes: 13e1df0928 ("kheaders: explicitly validate existence of cpio command")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Build environments might be running with different umask settings
resulting in indeterministic file modes for the files contained in
kheaders.tar.xz. The file itself is served with 444, i.e. world
readable. Archive the files explicitly with 744,a+X to improve
reproducibility across build environments.
--mode=0444 is not suitable as directories need to be executable. Also,
444 makes it hard to delete all the readonly files after extraction.
Cc: stable@vger.kernel.org
Signed-off-by: Matthias Maennich <maennich@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If IORING_FEAT_SINGLE_MMAP is ignored, as can happen if an application
uses an ancient liburing or does setup manually, then 3 mmap's are
required to map the ring into userspace. The kernel will still have
collapsed the mappings, however userspace may ask for mapping them
individually. If so, then we should not use the full number of ring
pages, as it may exceed the partial mapping. Doing so will yield an
-EFAULT from vm_insert_pages(), as we pass in more pages than what the
application asked for.
Cap the number of pages to match what the application asked for, for
the particular mapping operation.
Reported-by: Lucas Mülling <lmulling@proton.me>
Link: https://github.com/axboe/liburing/issues/1157
Fixes: 3ab1db3c60 ("io_uring: get rid of remap_pfn_range() for mapping rings/sqes")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 8cc3bad9d9 ("spi: Remove unneded check for orig_nents")
introduced a regression: unmapped data could now be passed to the DMA
APIs, resulting in null pointer dereferences. Commit 9f788ba457 ("spi:
Don't mark message DMA mapped when no transfer in it is") and commit
da560097c0 ("spi: Check if transfer is mapped before calling DMA sync
APIs") addressed the problem, but only partially. Unidirectional
transactions will still result in null pointer dereference. To prevent
that from happening, assign a dummy scatterlist when no data is mapped,
so that the DMA API can be called and not result in a null pointer
dereference.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Neil Armstrong <neil.armstrong@linaro.org>
Closes: https://lore.kernel.org/r/8ae675b5-fcf9-4c9b-b06a-4462f70e1322@linaro.org
Reported-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Closes: https://lore.kernel.org/all/d3679496-2e4e-4a7c-97ed-f193bd53af1d@notapiano
Closes: https://lore.kernel.org/all/4748499f-789c-45a8-b50a-2dd09f4bac8c@notapiano
Fixes: 8cc3bad9d9 ("spi: Remove unneded check for orig_nents")
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[nfraprado: wrote the commit message]
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://msgid.link/r/20240529-dma-oops-dummy-v1-1-bb43aacfb11b@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Artur Weber <aweber.kernel@gmail.com>:
Many of Samsung's Exynos 4 devices share the same midas-audio driver
to handle the codec setup. While most of these devices, including the
Midas itself, use the jack detection provided by the WM8994 driver,
other devices such as the Samsung Galaxy Tab 3 8.0 (lt01) use two GPIOs
and an ADC channel to determine jack insertion, the jack's type, and
button presses (for headsets with volume up/down/play buttons).
In the downstream kernel, this behavior is implemented in the sec-jack
driver[1], and the per-device settings are configured in *-jack.c files
in the mach folder (see e.g. the Tab 3's implementation[2]).
This patchset implements this mechanism in the midas_wm1811.c driver,
and adds new DTS options to allow for its configuration. It also
enables jack detection for the Samsung Galaxy Tab 3 8.0.
A very similar mechanism was already present in the aries_wm8994.c
driver[3]; this implementation heavily borrows from it, though there
are a few extra cleanups as well.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
'make W=1' now reports missing MODULE_DESCRIPTION lines. This patchset
cleans-up all the module definitions and adds MODULE_DESCRIPTION lines
as needed.
Add missing cache information to the Allwinner H616 SoC dtsi, to allow
the userspace, which includes lscpu(1) that uses the virtual files provided
by the kernel under the /sys/devices/system/cpu directory, to display the
proper H616 cache information.
Adding the cache information to the H616 SoC dtsi also makes the following
warning message in the kernel log go away:
cacheinfo: Unable to detect cache hierarchy for CPU 0
Rather conspicuously, almost no cache-related information is available in
the publicly available Allwinner H616 datasheet (version 1.0) and H616 user
manual (version 1.0). Thus, the cache parameters for the H616 SoC dtsi were
obtained and derived by hand from the cache size and layout specifications
found in the following technical reference manual, and from the cache size
and die revision hints available from the following community-provided data
and memory subsystem benchmarks:
- ARM Cortex-A53 revision r0p4 TRM, version J
- Summary of the two available H616 die revisions and their differences
in cache sizes observed from the CSSIDR_EL1 register readouts, provided
by Andre Przywara [1][2]
- Tinymembench benchmark results of the H616-based OrangePi Zero 2 SBC,
provided by Thomas Kaiser [3]
For future reference, here's a brief summary of the available documentation
and the community-provided data and memory subsystem benchmarks:
- All caches employ the 64-byte cache line length
- Each Cortex-A53 core has 32 KB of L1 2-way, set-associative instruction
cache and 32 KB of L1 4-way, set-associative data cache
- The size of the L2 cache depends on the actual H616 die revision (there
are two die revisions), so the entire SoC can have either 256 KB or 1 MB
of unified L2 16-way, set-associative cache [1]
Also for future reference, here's the relevant excerpt from the community-
provided H616 memory subsystem benchmark, [3] which confirms that 32 KB and
256 KB are the L1 data and L2 cache sizes, respectively:
block size : single random read / dual random read
1024 : 0.0 ns / 0.0 ns
2048 : 0.0 ns / 0.0 ns
4096 : 0.0 ns / 0.0 ns
8192 : 0.0 ns / 0.0 ns
16384 : 0.0 ns / 0.0 ns
32768 : 0.0 ns / 0.0 ns
65536 : 4.3 ns / 7.3 ns
131072 : 6.6 ns / 10.5 ns
262144 : 9.8 ns / 15.2 ns
524288 : 91.8 ns / 142.9 ns
1048576 : 138.6 ns / 188.3 ns
2097152 : 163.0 ns / 204.8 ns
4194304 : 178.8 ns / 213.5 ns
8388608 : 187.1 ns / 217.9 ns
16777216 : 192.2 ns / 220.9 ns
33554432 : 196.5 ns / 224.0 ns
67108864 : 215.7 ns / 259.5 ns
The changes introduced to the H616 SoC dtsi by this patch specify 256 KB as
the L2 cache size. As outlined by Andre Przywara, [2] a follow-up TF-A patch
will perform runtime adjustment of the device tree data, making the correct
L2 cache size of 1 MB present in the device tree for the boards based on the
revision of H616 that actually provides 1 MB of L2 cache.
[1] https://lore.kernel.org/linux-sunxi/20240430114627.0cfcd14a@donnerap.manchester.arm.com/
[2] https://lore.kernel.org/linux-sunxi/20240501103059.10a8f7de@donnerap.manchester.arm.com/
[3] https://raw.githubusercontent.com/ThomasKaiser/sbc-bench/master/results/4knM.txt
Suggested-by: Andre Przywara <andre.przywara@arm.com>
Helped-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/e4b9cc3e3d366a571e552c31dafa5de847bc1c12.1716914537.git.dsimic@manjaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Merge series from Matteo Martelli <matteomartelli3@gmail.com>:
This patch set adds support for the Everest-semi ES8311 codec.
Everest-semi ES8311 codec is a low-power mono audio codec with I2S audio
interface and I2C control.
Implemented and tested most of the codec features, with few limitations
listed in the driver commit message. The test setup was composed of a
ESP32-LyraT-Mini board, which embeds the codec, connected via I2C and
I2S to a Raspberry Pi Zero W host board. Some tests were also performed
on a Pine64 A64 host board (e.g. to test the suspend/resume not
supported by the rpi). The codec driver was bound with the simple-card
driver running on kernel v6.9-rc7.
Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:
There are two MQS instances on the i.MX95 platform.
The definition of bit positions in the control register are
different. In order to support these MQS modules, define
two compatible strings to distinguish them.
