- Simplify pci_epf_test_alloc_space() by using pci_epc_get_next_free_bar()
as other similar iterators do (Niklas Cassel)
- Configure endpoint BARs as 64-bit if that's all the hardware supports, in
addition to doing it if the BAR size is larger than 2GB (Niklas Cassel)
- Remove superfluous pci_epf_configure_bar(), since pci_epf_alloc_space()
now contains that functionality (Niklas Cassel)
- Simplify pci_epf_test_set_bar() (Niklas Cassel)
- Clean up pci_epf_test_unbind() to reduce indentation level (Niklas
Cassel)
* pci/endpoint:
PCI: endpoint: pci-epf-test: Clean up pci_epf_test_unbind()
PCI: endpoint: pci-epf-test: Simplify pci_epf_test_set_bar() loop
PCI: endpoint: pci-epf-test: Remove superfluous code
PCI: endpoint: Allocate a 64-bit BAR if that is the only option
PCI: endpoint: pci-epf-test: Simplify pci_epf_test_alloc_space() loop
- Return success from endpoint probe before incorrectly dropping the
reference to the BPMP (Vidya Sagar)
* pci/controller/tegra194:
PCI: tegra194: Fix probe path for Endpoint mode
- Configure endpoint BAR to be 64-bit if the PCI_BASE_ADDRESS_MEM_TYPE_64
flag is set instead of depending on the new BAR value itself (Niklas
Cassel)
- Set Subsystem Vendor ID correctly (Rick Wertenbroek)
* pci/controller/rockchip:
PCI: rockchip-ep: Remove wrong mask on subsys_vendor_id
PCI: rockchip-ep: Set a 64-bit BAR if requested
- Move DBI accesses from dw_pcie_ep_init() to dw_pcie_ep_init_complete() so
drivers for endpoints that require Refclk for DBI access, e.g., qcom and
tegra194, can control when this happens (Manivannan Sadhasivam)
- Add endpoint API kernel-doc (Manivannan Sadhasivam)
- Remove .deinit() callback and instead call rcar_gen4_pcie_ep_deinit()
explicitly from rcar-gen4, which was the only user (Manivannan
Sadhasivam)
- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to correspond with
dw_pcie_ep_init() (Manivannan Sadhasivam)
- Add dw_pcie_ep_cleanup() for drivers that need to clean up eDMA resources
when PERST# is asserted, e.g., qcom, tegra194 (Manivannan Sadhasivam)
- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
better reflect the functionality (Manivannan Sadhasivam)
- Call dw_pcie_ep_init_registers() directly from drivers instead of from
dw_pcie_ep_init() so drivers, e.g., qcom and tegra194, can do it when
Refclk is available (Manivannan Sadhasivam)
- Remove the "core_init_notifier" flag, which previously identified drivers
that required Refclk before DBI access, because it's now unnecessary
(Manivannan Sadhasivam)
* pci/controller/dwc:
PCI: endpoint: Remove "core_init_notifier" flag
PCI: dwc: ep: Call dw_pcie_ep_init_registers() API directly from all glue drivers
PCI: dwc: ep: Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers()
PCI: dwc: ep: Introduce dw_pcie_ep_cleanup() API for drivers supporting PERST#
PCI: dwc: ep: Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit()
PCI: dwc: ep: Remove deinit() callback from struct dw_pcie_ep_ops
PCI: dwc: ep: Add Kernel-doc comments for APIs
PCI: dwc: ep: Fix DBI access failure for drivers requiring refclk from host
- Configure endpoint BAR to be 64-bit if the PCI_BASE_ADDRESS_MEM_TYPE_64
flag is set instead of depending on the new BAR value itself (Niklas
Cassel)
* pci/controller/cadence:
PCI: cadence: Set a 64-bit BAR if requested
- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports because we can't get
them back out of D3cold (Mario Limonciello)
* pci/pm:
PCI/PM: Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports
- Update coding style to "mainline is normal path, errors are the
exceptions" (Andy Shevchenko)
* pci/msi:
PCI/MSI: Make error path handling follow the standard pattern
- Clear bridge Secondary Status errors after enumeration since enumeration
causes many errors (Vidya Sagar)
- Wait for Link Training==0 before starting Link retrain to avoid a race;
this was done previously but broken by a faulty merge (Ilpo Järvinen)
- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific about what
"LEGACY" means (Damien Le Moal)
- Update return types of pci_find_capability() stubs to match the extern
declarations for the actual implementations (Bjorn Helgaas)
- Drop unnecessary pci_enable_device_io() from pata_cs5520 (Heiner
Kallweit)
- Drop unused pci_enable_device_io() (Heiner Kallweit)
- On 2016 and newer BIOSes, skip early E820 check for ECAM regions
described in ACPI MCFG; there's no spec requirement for E820
reservations, and some machines don't provide them (Bjorn Helgaas)
- If devices were disconnected while suspended, don't wait for them when
resuming (Ilpo Järvinen)
* pci/enumeration:
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw88: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: ath10k: Refer to INTX instead of LEGACY
net: wangxun: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
r8169: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: alx: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: atlantic: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
net: amd-xgbe: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
VMCI: Use PCI_IRQ_ALL_TYPES to remove PCI_IRQ_LEGACY use
RDMA/vmw_pvrdma: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
IB/qib: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
drm/amdgpu: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
mfd: intel-lpss: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ntb: idt: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
platform/x86: intel_ips: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
tty: 8250_pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
usb: hcd-pci: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
ASoC: Intel: avs: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
Documentation: PCI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/portdrv: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI/MSI: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
PCI: Clarify intent of LT wait
PCI: Wait for Link Training==0 before starting Link retrain
PCI: Clear Secondary Status errors after enumeration
- Specify Revision 6 of the "Enable DPC" _DSM function to match the
implementation (Kuppuswamy Sathyanarayanan)
- Check for failure of the "Locate Port" _DSM function (Kuppuswamy
Sathyanarayanan)
* pci/edr:
PCI/EDR: Align EDR_PORT_LOCATE_DSM with PCI Firmware r3.3
PCI/EDR: Align EDR_PORT_DPC_ENABLE_DSM with PCI Firmware r3.3
- Lock the upstream bridge while using it to perform a Secondary Bus Reset
(Dave Jiang)
- Return failure when attempting Secondary Bus Reset below a CXL Port that
has SBR masked (Dave Jiang)
- Add a "cxl_bus" reset method that temporarily unmasks SBR (Dave Jiang)
- Add a warning if we reset a CXL type 3 memory device that was in use
while being reset (Dave Jiang)
* pci/cxl:
cxl: Add post-reset warning if reset results in loss of previously committed HDM decoders
PCI/CXL: Add 'cxl_bus' reset method for devices below CXL Ports
PCI/CXL: Fail bus reset if upstream CXL Port has SBR masked
PCI: Lock upstream bridge for pci_reset_function()
PCI/CXL: Move CXL Vendor ID to pci_ids.h
- Mask reporting of Mask Replay Timer Timeout Correctable Errors in the
bridge above Genesys GL975x SD host controllers; the errors are caused by
a GL975x hardware defect and they may lead to AER interrupts that prevent
system suspend (Kai-Heng Feng)
- Update URL of aer-inject tool (Kuppuswamy Sathyanarayanan)
* pci/aer:
PCI/AER: Update aer-inject tool source URL
PCI: Mask Replay Timer Timeout errors for Genesys GL975x SD host controller
TASK_SIZE_MAX should be set to a constant value, at least the largest
valid userspace address under any runtime configuration. This optimizes
the check in __access_ok(), which no longer needs to compute the runtime
value of TASK_SIZE. The check does not need to be exact, as long as it
accepts all valid userspace addresses and rejects all valid kernel
addresses; well-behaved programs will never fail the access_ok() check.
For RISC-V, which requires all virtual addresses to be sign extended,
the optimal choice is LONG_MAX because it simplifies the limit
comparison to a sign bit test.
This removes about half of the references to pgtable_l[45]_enabled.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327143858.711792-3-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
TASK_SIZE_MIN is unused since commit 085e2ff9ae ("efi: libstub: Drop
randomization of runtime memory map"). PGDIR_SIZE_L3 is only used in the
definition of TASK_SIZE_MIN.
Signed-off-by: Samuel Holland <samuel.holland@sifive.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240327143858.711792-2-samuel.holland@sifive.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
On runtime resume, pci_dev_wait() is called:
pci_pm_runtime_resume()
pci_pm_bridge_power_up_actions()
pci_bridge_wait_for_secondary_bus()
pci_dev_wait()
While a device is runtime suspended along with its PCI hierarchy, the
device could get disconnected. In such case, the link will not come up no
matter how long pci_dev_wait() waits for it.
Besides the above mentioned case, there could be other ways to get the
device disconnected while pci_dev_wait() is waiting for the link to come
up.
Make pci_dev_wait() exit if the device is already disconnected to avoid
unnecessary delay.
The use cases of pci_dev_wait() boil down to two:
1. Waiting for the device after reset
2. pci_bridge_wait_for_secondary_bus()
The callers in both cases seem to benefit from propagating the
disconnection as error even if device disconnection would be more
analoguous to the case where there is no device in the first place which
return 0 from pci_dev_wait(). In the case 2, it results in unnecessary
marking of the devices disconnected again but that is just harmless extra
work.
Also make sure compiler does not become too clever with dev->error_state
and use READ_ONCE() to force a fetch for the up-to-date value.
Link: https://lore.kernel.org/r/20240208132322.4811-1-ilpo.jarvinen@linux.intel.com
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Arul, Mateusz, Imcarneiro91, and Aman reported a regression caused by
07eab0901e ("efi/x86: Remove EfiMemoryMappedIO from E820 map"). On the
Lenovo Legion 9i laptop, that commit removes the ECAM area from E820, which
means the early E820 validation fails, which means we don't enable ECAM in
the "early MCFG" path.
The static MCFG table describes ECAM without depending on the ACPI
interpreter. Many Legion 9i ACPI methods rely on that, so they fail when
PCI config access isn't available, resulting in the embedded controller,
PS/2, audio, trackpad, and battery devices not being detected. The _OSC
method also fails, so Linux can't take control of the PCIe hotplug, PME,
and AER features:
# pci_mmcfg_early_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: not using ECAM ([mem 0xc0000000-0xce0fffff] not reserved)
ACPI Error: AE_ERROR, Returned by Handler for [PCI_Config] (20230628/evregion-300)
ACPI: Interpreter enabled
ACPI: Ignoring error and continuing table load
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
ACPI: Skipping parse of AML opcode: OpcodeName unavailable (0x0010)
ACPI BIOS Error (bug): Could not resolve symbol [\_SB.PC00.RP01._SB.PC00], AE_NOT_FOUND (20230628/dswload2-162)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20230628/psobject-220)
...
ACPI Error: Aborting method \_SB.PC00._OSC due to previous error (AE_NOT_FOUND) (20230628/psparse-529)
acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
# pci_mmcfg_late_init()
PCI: ECAM [mem 0xc0000000-0xce0fffff] (base 0xc0000000) for domain 0000 [bus 00-e0]
PCI: [Firmware Info]: ECAM [mem 0xc0000000-0xce0fffff] not reserved in ACPI motherboard resources
PCI: ECAM [mem 0xc0000000-0xce0fffff] is EfiMemoryMappedIO; assuming valid
PCI: ECAM [mem 0xc0000000-0xce0fffff] reserved to work around lack of ACPI motherboard _CRS
Per PCI Firmware r3.3, sec 4.1.2, ECAM space must be reserved by a PNP0C02
resource, but there's no requirement to mention it in E820, so we shouldn't
look at E820 to validate the ECAM space described by MCFG.
In 2006, 946f2ee5c7 ("[PATCH] i386/x86-64: Check that MCFG points to an
e820 reserved area") added a sanity check of E820 to work around buggy MCFG
tables, but that over-aggressive validation causes failures like this one.
Keep the E820 validation check for machines older than 2016, an arbitrary
ten years after 946f2ee5c7, so machines that depend on it don't break.
Skip the early E820 check for 2016 and newer BIOSes since there's no
requirement to describe ECAM in E820.
Link: https://lore.kernel.org/r/20240417204012.215030-2-helgaas@kernel.org
Fixes: 07eab0901e ("efi/x86: Remove EfiMemoryMappedIO from E820 map")
Reported-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218444
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Mateusz Kaduk <mateusz.kaduk@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org
After the last user was removed, remove this PCI core function. It's very
unlikely that we'll see a new device requiring io space access, even though
memory space access is supported.
Link: https://lore.kernel.org/r/213ebf62-53a3-42b7-8518-ecd5cd6d6b08@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
A few lines earlier pcim_enable_device() is called, which includes the
functionality of pci_enable_device_io(). Therefore we can safely remove the
call to pci_enable_device_io().
Link: https://lore.kernel.org/r/5068d0ce-2140-4d3f-b305-e8f0d61eed1f@gmail.com
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
f646c2a0a6 ("PCI: Return u8 from pci_find_capability() and similar") and
ee8b1c478a ("PCI: Return u16 from pci_find_ext_capability() and similar")
updated the return type of the extern declarations, but neglected to update
the type of the stubs used when CONFIG_PCI is not enabled.
Update them to match the extern declarations.
Link: https://lore.kernel.org/r/20240327180234.1529164-1-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Replace the last references to PCI_IRQ_LEGACY with PCI_IRQ_INTX in pci.h
header file. With this change, PCI_IRQ_LEGACY is unused and we can remove
its definition.
Link: https://lore.kernel.org/r/20240325070944.3600338-29-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In pvscsi_probe(), initialize irq_flag using PCI_IRQ_ALL_TYPES to remove
the use of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-28-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-27-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-26-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-25-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-24-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-23-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-22-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro.
Link: https://lore.kernel.org/r/20240325070944.3600338-21-dlemoal@kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
[bhelgaas: split to separate patch]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
For debug purposes we might want to view actual VF configuration
(including GGTT range, LMEM size, number of GuC contexts IDs or
doorbells) and the negotiated ABI versions (with GuC and PF).
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-7-michal.wajdeczko@intel.com
The VF drivers may immediately communicate with the GuC to obtain
the hardware config since the firmware shall already be running.
With the GuC communication established, VFs can also obtain the
values of the runtime registers (fuses) from the PF driver.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-6-michal.wajdeczko@intel.com
The VF driver doesn't know which GuC firmware was loaded by the PF
driver and must perform GuC ABI version handshake prior to sending
any other H2G actions to the GuC to submit workloads.
The VF driver also doesn't have access to the fuse registers and
must rely on the runtime info, which includes values of the fuse
registers, that the PF driver is exposing to the VFs.
Add functions to cover that functionality. We will use these
functions in upcoming patches.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-5-michal.wajdeczko@intel.com
In upcoming patches we will add support to the VF driver to
read its configuration from the GuC using special H2G actions.
Add necessary definitions to our GuC firmware ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-4-michal.wajdeczko@intel.com
The version negotiation between the VF driver and the GuC firmware
must start with explicit soft reset of the GuC state initiated by
the VF driver. Add VF2GUC action definitions to the ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-3-michal.wajdeczko@intel.com
In upcoming patches we will add a version negotiation between
the VF driver and the GuC firmware. Add necessary definitions
to our GuC firmware ABI header.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240516110546.2216-2-michal.wajdeczko@intel.com
Turn the etnaviv_is_model_rev() macro into a static inline function.
Use the raw model number as a parameter instead of the chipModel_GCxxxx
defines. This reduces synchronization requirements for the generated
headers. For newer hardware, the GCxxxx names are not the correct model
names anyway. For example, model 0x8000 NPUs are called VIPNano-QI/SI(+)
by VeriSilicon.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Update the state HI header from the rnndb commit
8d7ee714cfe2 ("Merge pull request #24 from pH5/unknown-3950").
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Christian Gmeiner <cgmeiner@igalia.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
The custom EC address space handler in the WMI driver was only needed
because the EC driver did not install its address space handler for
EC operation regions beyond the EC device scope in the ACPI namespace.
That has just changed, so the custom EC address handler is not needed
any more and it can be removed.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It is reported that _DSM evaluation fails in ucsi_acpi_dsm() on Lenovo
IdeaPad Pro 5 due to a missing address space handler for the EC address
space:
ACPI Error: No handler for Region [ECSI] (000000007b8176ee) [EmbeddedControl] (20230628/evregion-130)
This happens because if there is no ECDT, the EC driver only registers
the EC address space handler for operation regions defined in the EC
device scope of the ACPI namespace while the operation region being
accessed by the _DSM in question is located beyond that scope.
To address this, modify the ACPI EC driver to install the EC address
space handler at the root of the ACPI namespace for the first EC that
can be found regardless of whether or not an ECDT is present.
Note that this change is consistent with some examples in the ACPI
specification in which EC operation regions located outside the EC
device scope are used (for example, see Section 9.17.15 in ACPI 6.5),
so the current behavior of the EC driver is arguably questionable.
Reported-by: webcaptcha <webcapcha@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218789
Link: https://uefi.org/specs/ACPI/6.5/09_ACPI_Defined_Devices_and_Device_Specific_Objects.html#example-asl-code
Link: https://lore.kernel.org/linux-acpi/Zi+0whTvDbAdveHq@kuha.fi.intel.com
Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With gcc-7 and earlier, there are lots of warnings like
In file included from <command-line>:0:0:
In function '__guc_context_policy_add_priority.isra.66',
inlined from '__guc_context_set_prio.isra.67' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3292:3,
inlined from 'guc_context_set_prio' at drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:3320:2:
include/linux/compiler_types.h:399:38: error: call to '__compiletime_assert_631' declared with attribute error: FIELD_PREP: mask is not constant
_compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
^
...
drivers/gpu/drm/i915/gt/uc/intel_guc_submission.c:2422:3: note: in expansion of macro 'FIELD_PREP'
FIELD_PREP(GUC_KLV_0_KEY, GUC_CONTEXT_POLICIES_KLV_ID_##id) | \
^~~~~~~~~~
Make sure that GUC_KLV_0_KEY is an unsigned value to avoid the warning.
Fixes: 77b6f79df6 ("drm/i915/guc: Update to GuC version 69.0.3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240430164809.482131-1-julia.filipchuk@intel.com
Highlights:
- New drivers/platform/arm64 directory for arm64 embedded-controller drivers
- New drivers for:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight support
- Miscellaneous cleanups / fixes / improvements
The following is an automated git shortlog grouped by driver:
ACPI:
- platform-profile: add platform_profile_cycle()
Add ACPI quickstart button (PNP0C32) driver:
- Add ACPI quickstart button (PNP0C32) driver
Add lenovo-yoga-tab2-pro-1380-fastcharger driver:
- Add lenovo-yoga-tab2-pro-1380-fastcharger driver
Add new Dell UART backlight driver:
- Add new Dell UART backlight driver
Add lenovo WMI camera button driver:
- Add lenovo WMI camera button driver
Add new MeeGoPad ANX7428 Type-C Cross Switch driver:
- Add new MeeGoPad ANX7428 Type-C Cross Switch driver
ISST:
- Support SST-BF and SST-TF per level
- Add missing MODULE_DESCRIPTION
- Add dev_fmt
- Use in_range() to check package ID validity
- Support partitioned systems
- Shorten the assignments for power_domain_info
- Use local variable for auxdev->dev
MAINTAINERS:
- drop Daniel Oliveira Nascimento
arm64:
- dts: qcom: acer-aspire1: Add embedded controller
asus-laptop:
- Use sysfs_emit() and sysfs_emit_at() to replace sprintf()
asus-wmi:
- cleanup main struct to avoid some holes
- Add support for MCU powersave
- ROG Ally increase wait time, allow MCU powersave
- adjust formatting of ppt-<name>() functions
- store a min default for ppt options
- support toggling POST sound
- add support variant of TUF RGB
- add support for Vivobook GPU MUX
- add support for 2024 ROG Mini-LED
- use sysfs_emit() instead of sprintf()
classmate-laptop:
- Add missing MODULE_DESCRIPTION()
devm-helpers:
- Fix a misspelled cancellation in the comments
dt-bindings:
- leds: Add LED_FUNCTION_FNLOCK
- platform: Add Acer Aspire 1 EC
hp-wmi:
- use sysfs_emit() instead of sprintf()
huawei-wmi:
- use sysfs_emit() instead of sprintf()
ideapad-laptop:
- switch platform profiles using thermal management key
- add FnLock LED class device
- add fn_lock_get/set functions
intel-vbtn:
- Log event code on unexpected button events
intel/pmc:
- Enable S0ix blocker show in Lunar Lake
- Add support to show S0ix blocker counter
- Update LNL signal status map
msi-laptop:
- Use sysfs_emit() to replace sprintf()
p2sb:
- Don't init until unassigned resources have been assigned
- Make p2sb_get_devfn() return void
platform:
- arm64: Add Acer Aspire 1 embedded controller driver
- Add ARM64 platform directory
platform/surface:
- aggregator: Log critical errors during SAM probing
- aggregator_registry: Add support for thermal sensors on the Surface Pro 9
- platform_profile: add fan profile switching
platform/x86/amd:
- pmc: Add new ACPI ID AMDI000B
- pmf: Add new ACPI ID AMDI0105
platform/x86/amd/hsmp:
- switch to use device_add_groups()
platform/x86/amd/pmc:
- Fix implicit declaration error on i386
- Add AMD MP2 STB functionality
platform/x86/fujitsu-laptop:
- Replace sprintf() with sysfs_emit()
platform/x86/intel-uncore-freq:
- Don't present root domain on error
platform/x86/intel/ifs:
- Disable irq during one load stage
- trace: display batch num in hex
- Classify error scenarios correctly
platform/x86/intel/pmc:
- Fix PCH names in comments
platform/x86/intel/sdsi:
- Add attribute to read the current meter state
- Add in-band BIOS lock support
- Combine read and write mailbox flows
- Set message size during writes
platform/x86/intel/tpmi:
- Add additional TPMI header fields
- Align comments in kernel-doc
- Check major version change for TPMI Information
- Handle error from tpmi_process_info()
quickstart:
- Fix race condition when reporting input event
- fix Kconfig selects
- Miscellaneous improvements
samsung-laptop:
- Use sysfs_emit() to replace the old interface sprintf()
think-lmi:
- Convert container_of() macros to static inline
thinkpad_acpi:
- Use false to set acpi_send_ev to false
- Support hotkey to disable trackpoint doubletap
- Support for system debug info hotkey
- Support for trackpoint doubletap
- Simplify known_ev handling
- Add mappings for adaptive kbd clipping-tool and cloud keys
- Switch to using sparse-keymap helpers
- Drop KEY_RESERVED special handling
- Use correct keycodes for volume and brightness keys
- Change hotkey_reserved_mask initialization
- Do not send ACPI netlink events for unknown hotkeys
- Move tpacpi_driver_event() call to tpacpi_input_send_key()
- Move hkey > scancode mapping to tpacpi_input_send_key()
- Drop tpacpi_input_send_key_masked() and hotkey_driver_event()
- Always call tpacpi_driver_event() for hotkeys
- Move hotkey_user_mask check to tpacpi_input_send_key()
- Move special original hotkeys handling out of switch-case
- Move adaptive kbd event handling to tpacpi_driver_event()
- Make tpacpi_driver_event() return if it handled the event
- Do hkey to scancode translation later
- Use tpacpi_input_send_key() in adaptive kbd code
- Drop ignore_acpi_ev
- Drop setting send_/ignore_acpi_ev defaults twice
- Provide hotkey_poll_stop_sync() dummy
- Take hotkey_mutex during hotkey_exit()
- change sprintf() to sysfs_emit()
- use platform_profile_cycle()
tools arch x86:
- Add dell-uart-backlight-emulator
tools/arch/x86/intel_sdsi:
- Add current meter support
- Simplify ascii printing
- Fix meter_certificate decoding
- Fix meter_show display
- Fix maximum meter bundle length
tools/power/x86/intel-speed-select:
- v1.19 release
- Display CPU as None for -1
- SST BF/TF support per level
- Increase number of CPUs displayed
- Present all TRL levels for turbo-freq
- Fix display for unsupported levels
- Support multiple dies
- Increase die count
toshiba_acpi:
- Add quirk for buttons on Z830
uv_sysfs:
- use sysfs_emit() instead of sprintf()
wmi:
- Add MSI WMI Platform driver
- Add driver development guide
- Mark simple WMI drivers as legacy-free
- Avoid returning AE_OK upon unknown error
- Support reading/writing 16 bit EC values
x86-android-tablets:
- Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
- Xiaomi pad2 RGB LED fwnode updates
- Pass struct device to init()
- Add Lenovo Yoga Tablet 2 Pro 1380F/L data
- Unregister devices in reverse order
- Add swnode for Xiaomi pad2 indicator LED
- Use GPIO_LOOKUP() macro
xiaomi-wmi:
- Drop unnecessary NULL checks
- Fix race condition when reporting key events
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmZF1kwUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9wSXwgAsaSH6Sawn5sHOj52lQY7gNI0uf3V
YfZFawRpreCrlwLPU2f7SX0mLW+hh+ekQ2C1NvaUUVqQwzONELh0DWSYJpzz/v1r
jD14EcY2dnTv+FVyvCj5jZsiYxo/ViTvthMduiO7rrJKN7aOej9iNn68P0lvcY8s
HDJ2lPFNGnY01snz3C1NyjyIWw8YsfwqXEqOmhrDyyoKLXpsDs8H/Jqq5yXfeLax
hSpjbGB85EGJPXna6Ux5TziPh/MYMtF1+8R4Fn0sGvfcZO6/H1fDne0uI9UwrKnN
d2g4VHXU2DIhTshUc14YT2AU27eQiZVN+J3VpuYIbC9cmlQ2F6bjN3uxoQ==
=UWbu
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
- New drivers/platform/arm64 directory for arm64 embedded-controller
drivers
- New drivers:
- Acer Aspire 1 embedded controllers (for arm64 models)
- ACPI quickstart PNP0C32 buttons
- Dell All-In-One backlight support (dell-uart-backlight)
- Lenovo WMI camera buttons
- Lenovo Yoga Tablet 2 Pro 1380F/L fast charging
- MeeGoPad ANX7428 Type-C Cross Switch (power sequencing only)
- MSI WMI sensors (fan speed sensors only for now)
- Asus WMI:
- 2024 ROG Mini-LED support
- MCU powersave support
- Vivobook GPU MUX support
- Misc. other improvements
- Ideapad laptop:
- Export FnLock LED as LED class device
- Switch platform profiles using thermal management key
- Intel drivers:
- IFS: various improvements
- PMC: Lunar Lake support
- SDSI: various improvements
- TPMI/ISST: various improvements
- tools: intel-speed-select: various improvements
- MS Surface drivers:
- Fan profile switching support
- Surface Pro thermal sensors support
- ThinkPad ACPI:
- Reworked hotkey support to use sparse keymaps
- Add support for new trackpoint-doubletap, Fn+N and Fn+G hotkeys
- WMI core:
- New WMI driver development guide
- x86 Android tablets:
- Lenovo Yoga Tablet 2 Pro 1380F/L support
- Xiaomi MiPad 2 status LED and bezel touch buttons backlight
support
- Miscellaneous cleanups / fixes / improvements
* tag 'platform-drivers-x86-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (128 commits)
platform/x86: Add new MeeGoPad ANX7428 Type-C Cross Switch driver
devm-helpers: Fix a misspelled cancellation in the comments
tools arch x86: Add dell-uart-backlight-emulator
platform/x86: Add new Dell UART backlight driver
platform/x86: x86-android-tablets: Create LED device for Xiaomi Pad 2 bottom bezel touch buttons
platform/x86: x86-android-tablets: Xiaomi pad2 RGB LED fwnode updates
platform/x86: x86-android-tablets: Pass struct device to init()
platform/x86/amd: pmc: Add new ACPI ID AMDI000B
platform/x86/amd: pmf: Add new ACPI ID AMDI0105
platform/x86: p2sb: Don't init until unassigned resources have been assigned
platform/surface: aggregator: Log critical errors during SAM probing
platform/x86: ISST: Support SST-BF and SST-TF per level
platform/x86/fujitsu-laptop: Replace sprintf() with sysfs_emit()
tools/power/x86/intel-speed-select: v1.19 release
tools/power/x86/intel-speed-select: Display CPU as None for -1
tools/power/x86/intel-speed-select: SST BF/TF support per level
tools/power/x86/intel-speed-select: Increase number of CPUs displayed
tools/power/x86/intel-speed-select: Present all TRL levels for turbo-freq
tools/power/x86/intel-speed-select: Fix display for unsupported levels
tools/power/x86/intel-speed-select: Support multiple dies
...
Simon Glass wanted to support binman's output properties in order to
check their validity using the binding checks and proposed changes with
the missing properties as well as a binman compatible.
Krzysztof Kozlowski on his side shared a new yaml for describing
Samsung's OneNAND interface.
The interface with NVMEM has also been slightly improved/fixed,
especially now that OTP are also supported in the NAND subsystem.
Along with these changes, small cleanups have also been contributed
around ID tables, structure sizes, arithmetic checks and comments.
* Raw NAND subsystem
Two small fixes, one in the Hynix vendor code for properly returning an
error which might have been ignored and another in the Davinci driver to
properly synchronize the controller with the gpio domain.
* SPI NOR subsystem
SPI NOR now uses div_u64() instead of div64_u64() in places where the
divisor is 32 bits. Many 32 bit architectures can optimize this variant
better than a full 64 bit divide.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAmZFzEwACgkQJWrqGEe9
VoRNZwf/dTvWM2r/tLPkXJ4lDdZUMJO2Z5YebSwcUWTJ8P4yhoGfxDwgEiWaaauF
Z++MdSBEK3C9us19ro+YCFidq7T+m1PcekHLa1Zckcy2NOLFyRT7O5j16CEQKHlj
a/9WfZ37TIaWelZDXnm6nWyTxsDFp5h9IOsG32/SckBFm/TU0+G2MCKz7HvJ6DRg
/K6Yu+3KpxhO0D3PhTm5+Fi7UhBPABKfvBYrLFiYnuMi3d0L6/75wxj8dje7iW+Q
9WusrjKvhf3ffp9715RxjDQdMA1MIa/ok7tIlTQXyBfDM1xZkr6MDNeDJfd2FU7J
2hk/ga7A/zigKJ37ftw/34YZJK6xmw==
=AtHp
-----END PGP SIGNATURE-----
Merge tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD:
- Simon Glass wanted to support binman's output properties in order
to check their validity using the binding checks and proposed
changes with the missing properties as well as a binman compatible.
- Krzysztof Kozlowski on his side shared a new yaml for describing
Samsung's OneNAND interface.
- The interface with NVMEM has also been slightly improved/fixed,
especially now that OTP are also supported in the NAND subsystem.
- Along with these changes, small cleanups have also been contributed
around ID tables, structure sizes, arithmetic checks and comments.
Raw NAND subsystem:
- Two small fixes, one in the Hynix vendor code for properly
returning an error which might have been ignored and another in the
Davinci driver to properly synchronize the controller with the gpio
domain.
SPI NOR subsystem:
- SPI NOR now uses div_u64() instead of div64_u64() in places where
the divisor is 32 bits. Many 32 bit architectures can optimize this
variant better than a full 64 bit divide"
* tag 'mtd/for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: spi-nor: replace unnecessary div64_u64() with div_u64()
mtd: mchp23k256: drop unneeded MODULE_ALIAS
dt-bindings: mtd: fixed-partition: Add binman compatibles
dt-bindings: mtd: fixed-partitions: Add alignment properties
mtd: maps: sa1100-flash: Prefer struct_size over open coded arithmetic
mtd: core: Align comment with an action in mtd_otp_nvmem_add()
mtd: rawnand: hynix: fixed typo
mtd: rawnand: davinci: Add dummy read after sending command
mtd: partitions: redboot: Added conversion of operands to a larger type
dt-bindings: mtd: Add Samsung S5Pv210 OneNAND
mtd: core: Don't fail mtd_otp_nvmem_add() if OTP is unsupported
mtd: core: Report error if first mtd_otp_size() call fails in mtd_otp_nvmem_add()
