1. Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850.
2. Correct PLL clock IDs on ExynosAutov9.
3. Google GS101:
- Propagate certain clock rates to allow setting proper SPI clock
rates.
- Add HSI0 and HSI2 clock controllers.
- Mark certain clocks critical.
4. Convert old S3C64xx clock controller bindings to DT schema.
-----BEGIN PGP SIGNATURE-----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=xWaH
-----END PGP SIGNATURE-----
Merge tag 'samsung-clk-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into clk-samsung
Pull Samsung clk driver updates from Krzysztof Kozlowski:
- Allow choice of manual or firmware-driven control over PLLs, needed
to fully implement CPU clock controllers on Exynos850
- Correct PLL clock IDs on ExynosAutov9
- Propagate certain clock rates to allow setting proper SPI clock
rates on Google GS101
- Add HSI0 and HSI2 clock controllers for Google GS101
- Mark certain Google GS101 clocks critical
- Convert old S3C64xx clock controller bindings to DT schema
* tag 'samsung-clk-6.10-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: gs101: drop unused HSI2 clock parent data
clk: samsung: gs101: mark some apm UASC and XIU clocks critical
clk: samsung: gs101: add support for cmu_hsi2
clk: samsung: gs101: add support for cmu_hsi0
dt-bindings: clock: google,gs101-clock: add HSI2 clock management unit
dt-bindings: clock: google,gs101-clock: add HSI0 clock management unit
clk: samsung: gs101: propagate PERIC1 USI SPI clock rate
clk: samsung: gs101: propagate PERIC0 USI SPI clock rate
clk: samsung: exynosautov9: fix wrong pll clock id value
dt-bindings: clock: samsung,s3c6400-clock: convert to DT Schema
clk: samsung: exynos850: Add CMU_CPUCL0 and CMU_CPUCL1
clk: samsung: Implement manual PLL control for ARM64 SoCs
btree_iter is used in two ways: either allocated on the stack with a
fixed size MAX_BSETS, or from a mempool with a dynamic size based on the
specific cache set. Previously, the struct had a fixed-length array of
size MAX_BSETS which was indexed out-of-bounds for the dynamically-sized
iterators, which causes UBSAN to complain.
This patch uses the same approach as in bcachefs's sort_iter and splits
the iterator into a btree_iter with a flexible array member and a
btree_iter_stack which embeds a btree_iter as well as a fixed-length
data array.
Cc: stable@vger.kernel.org
Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039368
Signed-off-by: Matthew Mirvish <matthew@mm12.xyz>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-3-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Coly Li <colyli@suse.de>
Link: https://lore.kernel.org/r/20240509011117.2697-2-colyli@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- It missed to check validation of fault attrs in parse_options(),
let's fix to add check condition in f2fs_build_fault_attr().
- Use f2fs_build_fault_attr() in __sbi_store() to clean up code.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
type of f2fs_inode.i_gc_failures, f2fs_inode_info.i_gc_failures, and
f2fs_sb_info.gc_pin_file_threshold is __le16, unsigned int, and u64,
so it will cause truncation during comparison and persistence.
Unifying variable of these three variables to unsigned short, and
add an upper boundary limitation for gc_pin_file_threshold.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
After commit 3db1de0e58 ("f2fs: change the current atomic write way"),
we removed all GC_FAILURE_ATOMIC usage, let's change i_gc_failures[]
array to i_pin_failure for cleanup.
Meanwhile, let's define i_current_depth and i_gc_failures as union
variable due to they won't be valid at the same time.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Commit b1c9d3f833 ("f2fs: support printk_ratelimited() in f2fs_printk()")
missed some cases, cover all remains for cleanup.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As for zoned-UFS, f2fs section size is forced to zone size. And zone
size may not aligned to pow2.
Fixes: 859fca6b70 ("f2fs: swap: support migrating swapfile in aligned write mode")
Signed-off-by: Liao Yuanhong <liaoyuanhong@vivo.com>
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add Zstandard compression as the 4th supported algorithm since it
becomes more popular now and some end users have asked this for
quite a while [1][2].
Each EROFS physical cluster contains only one valid standard
Zstandard frame as described in [3] so that decompression can be
performed on a per-pcluster basis independently.
Currently, it just leverages multi-call stream decompression APIs with
internal sliding window buffers. One-shot or bufferless decompression
could be implemented later for even better performance if needed.
[1] https://github.com/erofs/erofs-utils/issues/6
[2] https://lore.kernel.org/r/Y08h+z6CZdnS1XBm@B-P7TQMD6M-0146.lan
[3] https://www.rfc-editor.org/rfc/rfc8478.txt
Acked-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240508234453.17896-1-xiang@kernel.org
Add KHDR_INCLUDES to the CFLAGS to pull in the kselftest harness
dependencies (-D_GNU_SOURCE).
Also, remove redefinitions of _GNU_SOURCE in the source code.
Fixes: 8092162335 ("selftests/harness: remove use of LINE_MAX")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404301040.3bea5782-oliver.sang@intel.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add the -D_GNU_SOURCE flag to KHDR_INCLUDES so that it is defined in a
central location.
Commit 8092162335 ("selftests/harness: remove use of LINE_MAX")
introduced asprintf into kselftest_harness.h, which is a GNU extension
and needs _GNU_SOURCE to either be defined prior to including headers or
with the -D_GNU_SOURCE flag passed to the compiler.
Fixed up commit log:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 8092162335 ("selftests/harness: remove use of LINE_MAX")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404301040.3bea5782-oliver.sang@intel.com
Signed-off-by: Edward Liaw <edliaw@google.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Nowadays *-objs list is just for user space programs.
This commit obsolete the usage, and simplify Makefile for firewire KUnit
tests since the tests are not composite objects.
Link: https://lore.kernel.org/r/20240508105351.532693-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
When building with clang, via:
make LLVM=1 -C tools/testing/selftests
...two types of warnings occur:
warning: absolute value function 'abs' given an argument of type
'long' but has parameter of type 'int' which may cause truncation of
value
warning: taking the absolute value of unsigned type 'unsigned long'
has no effect
Fix these by:
a) using labs() in place of abs(), when long integers are involved, and
b) Change to use signed integer data types, in places where subtraction
is used (and could end up with negative values).
c) Remove a duplicate abs() call in cmt_test.c.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix the below checkbashisms errors. Because of these errors, these tests
will fail on dash shell.
possible bashism in test.d/kprobe/kretprobe_entry_arg.tc line 14 ('function' is useless):
function streq() {
possible bashism in test.d/dynevent/fprobe_entry_arg.tc line 14 ('function' is useless):
function streq() {
Fixes: f6e2253a61 ("selftests/ftrace: Add test cases for entry args at function exit")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Since the dynevent/add_remove_btfarg.tc test case forgets to ensure that
fprobe is enabled for some structure field access tests which uses the
fprobe, it fails if CONFIG_FPROBE=n or CONFIG_FPROBE_EVENTS=n.
Fixes it to ensure the fprobe events are supported.
Fixes: d892d3d3d8 ("selftests/ftrace: Add BTF fields access testcases")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Fix the following warnings by adding return check and error handling.
test_execve.c: In function ‘do_tests’:
test_execve.c💯17: warning: ignoring return value of
‘capng_get_caps_process’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
100 | capng_get_caps_process();
| ^~~~~~~~~~~~~~~~~~~~~~~~
validate_cap.c: In function ‘main’:
validate_cap.c:47:9: warning: ignoring return value of
‘capng_get_caps_process’
declared with attribute ‘warn_unused_result’ [-Wunused-result]
47 | capng_get_caps_process();
| ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Amer Al Shanawany <amer.shanawany@gmail.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
In the function l5_test(), variable $tests is empty when there is no .mk
file in the subsystem to be tested. It causes the following grep operation
get stuck.
This fix check the variable $tests, return when it is empty.
Signed-off-by: Lu Dai <dai.lu@exordes.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently oem_id is defined as uint8_t[6] and casted to uint64_t*
in some use case. This would lead code scanner to complain about
access beyond. Re-define it in union to enforce 8-byte size and
alignment to avoid potential issue.
Signed-off-by: Michael Chen <michael.chen@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It incorrectly claimed a resource isn't CPU visible if it's located at
the very end of CPU visible VRAM.
Fixes: a6ff969fe9 ("drm/amdgpu: fix visible VRAM handling during faults")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3343
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reported-and-Tested-by: Jeremy Day <jsday@noreason.ca>
Signed-off-by: Michel Dänzer <mdaenzer@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
[Changes from V1:
- Use a default branch in the switch statement to initialize `val'.]
GCC warns that `val' may be used uninitialized in the
BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as:
[...]
unsigned long long val; \
[...] \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
case 1: val = *(const unsigned char *)p; break; \
case 2: val = *(const unsigned short *)p; break; \
case 4: val = *(const unsigned int *)p; break; \
case 8: val = *(const unsigned long long *)p; break; \
} \
[...]
val; \
} \
This patch adds a default entry in the switch statement that sets
`val' to zero in order to avoid the warning, and random values to be
used in case __builtin_preserve_field_info returns unexpected values
for BPF_FIELD_BYTE_SIZE.
Tested in bpf-next master.
No regressions.
Signed-off-by: Jose E. Marchesi <jose.marchesi@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240508101313.16662-1-jose.marchesi@oracle.com
Indirect Ring State is the recommended mode for Xe2 platforms,
enable it by default.
v2: Set has_indirect_ring_state to '1' instead of 'true'
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507224255.5059-5-niranjana.vishwanathapura@intel.com
When Indirect Ring State is enabled, the Ring Buffer state and
Batch Buffer state are context save/restored to/from Indirect
Ring State instead of the LRC. The Indirect Ring State is a 4K
page mapped in global GTT at a 4K aligned address. This address
is programmed in the INDIRECT_RING_STATE register of the
corresponding context's LRC.
v2: Fix kernel-doc, add bspec reference
v3: Fix typo in commit text
Bspec: 67296, 67139
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507224255.5059-3-niranjana.vishwanathapura@intel.com
Move BCACHEFS_STATFS_MAGIC value to UAPI <linux/magic.h> under
BCACHEFS_SUPER_MAGIC definition (use common approach for name) and reuse the
definition in bcachefs_format.h BCACHEFS_STATFS_MAGIC.
There are other bcachefs magic definitions: BCACHE_MAGIC, BCHFS_MAGIC,
which use UUID_INIT() and are used only in libbcachefs. Therefore move
only BCACHEFS_STATFS_MAGIC value, which can be used outside of
libbcachefs for f_type field in struct statfs in statfs() or fstatfs().
Suggested-by: Su Yue <glass.su@suse.com>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now have a small bitmap in the member info section of the superblock
for "regions that have btree nodes", so that if we ever have to scan for
btree nodes in repair we don't have to scan the whole device(s).
This tweaks the allocator to prefer allocating from regions that are
already marked in this bitmap.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Tracepoints are garbage, and perf trace even cuts off some of our
fields.
Much nicer to just trace a string, and then we can build nicely
formatted output with printbufs.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes a lifetime issue; bch2_nocow_write_unlock() uses
PTR_BUCKET_POS(), which needs the device - but we drop our ref to the
device in bch2_write_endio().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_dev_bkey_exists() is going away; bch2_dev_have_ref() documents that
we're looking up a device without checking if it's present because we
have a reference to it already.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Wrapper around bch2_dev_have_ref() for open_buckets; we do guarantee
that the device an open_bucket points to exists.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This is needed for the next patch - the write submit path has to be able
to allocate a replica bio even when we weren't able to get a ref on the
device.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
