Platforms such as Tensor gs101 the pclk frequency is 267Mhz. Increase
PCLK_AVAIL_MAX so we don't fail the frequency check.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-5-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This option is intended to be set for SoCs that have HCI_V2P1_CTRL register
and can select their tick source via IA_TICK_SEL bit.
Source clock selection for timer tick
0x0 = Bus clock (aclk)
0x1 = Function clock (mclk)
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-4-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This option is intended to be set on platforms whose ufspr registers are
only accessible via smc call (such as gs101).
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-3-peter.griffin@linaro.org
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add dedicated google,gs101-ufs compatible for Google Tensor gs101 SoC.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240426122004.2249178-2-peter.griffin@linaro.org
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We can reduce boilerplate code by using
devm_regulator_get_enable_read_voltage().
The common mode voltage is now passed as a parameter in the init
functions so we can avoid adding a state member that is only used
during init.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-5-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We can reduce boilerplate code by using
devm_regulator_get_enable_read_voltage().
To maintain backwards compatibility in the case a DT does not provide
an avdd-supply, we fall back to calling devm_regulator_get_enable()
so that there is no change in user-facing behavior (e.g. dummy regulator
will still be in sysfs).
Also add an informative error message when we failed to get the voltage
and knowing the voltage is required while we are touching this.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240429-regulator-get-enable-get-votlage-v2-4-b1f11ab766c1@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
On x86_64 and allmodconfig, this shrinks the size of 'struct regmap_config'
from 328 to 312 bytes.
This is usually a win, because this structure is used as a static global
variable.
When moving the kerneldoc fields, I've tried to keep the layout as
consistent as possible, which is not really easy!
Before:
/* size: 328, cachelines: 6, members: 55 */
/* sum members: 296, holes: 6, sum holes: 25 */
/* padding: 7 */
/* last cacheline: 8 bytes */
After:
/* size: 312, cachelines: 5, members: 55 */
/* sum members: 296, holes: 5, sum holes: 16 */
/* last cacheline: 56 bytes */
For the records, this is also widely used:
$git grep static.*regmap_config | wc -l
1327
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5e039cd8fe415dd7ab3169948c08a5311db9fb9a.1715024007.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Mark Brown <broonie@kernel.org>
DebugFS output for fw_resource_count shows:
estimate exchange used[0] high water limit [1945] n estimate iocb2 used [0] high water limit [5141]
estimate exchange2 used[0] high water limit [1945]
Which shows incorrect display due to missing newline in seq_print().
[mkp: fix checkpatch warning about space before newline]
Fixes: 5f63a163ed ("scsi: qla2xxx: Fix exchange oversubscription for management commands")
Signed-off-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Link: https://lore.kernel.org/r/20240426020056.3639406-1-himanshu.madhani@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This list looks like it's been unused since the OF conversion in
2008 in
commit 826b6cfcd5 ("fore200e: Convert over to pure OF driver.")
This also means we can remove the 'entry' member for the list.
Build tested only.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240503001822.183061-1-linux@treblig.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The new netdev queue api is implemented for gve.
Tested-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Praveen Kaligineedi <pkaligineedi@google.com>
Reviewed-by: Harshitha Ramamurthy <hramamurthy@google.com>
Signed-off-by: Shailend Chand <shailend@google.com>
Link: https://lore.kernel.org/all/20240501232549.1327174-11-shailend@google.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, we allocate a count-sized kernel buffer and copy count from
userspace to that buffer. Later, we use kstrtouint on this buffer but we
don't ensure that the string is terminated inside the buffer, this can
lead to OOB read when using kstrtouint. Fix this issue by using
memdup_user_nul instead of memdup_user.
Fixes: 61d8658b4a ("scsi: qedf: Add QLogic FastLinQ offload FCoE driver framework.")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-4-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, we allocate a nbytes-sized kernel buffer and copy nbytes from
userspace to that buffer. Later, we use sscanf on this buffer but we don't
ensure that the string is terminated inside the buffer, this can lead to
OOB read when using sscanf. Fix this issue by using memdup_user_nul instead
of memdup_user.
Fixes: 9f30b67475 ("bfa: replace 2 kzalloc/copy_from_user by memdup_user")
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://lore.kernel.org/r/20240424-fix-oob-read-v2-3-f1f1b53a10f4@gmail.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Cupertino Miranda says:
====================
bpf/verifier: range computation improvements
Hi everyone,
This is what I hope to be the last version. :)
Regards,
Cupertino
Changes from v1:
- Reordered patches in the series.
- Fix refactor to be acurate with original code.
- Fixed other mentioned small problems.
Changes from v2:
- Added a patch to replace mark_reg_unknowon for __mark_reg_unknown in
the context of range computation.
- Reverted implementation of refactor to v1 which used a simpler
boolean return value in check function.
- Further relaxed MUL to allow it to still compute a range when neither
of its registers is a known value.
- Simplified tests based on Eduards example.
- Added messages in selftest commits.
Changes from v3:
- Improved commit message of patch nr 1.
- Coding style fixes.
- Improve XOR and OR tests.
- Made function calls to pass struct bpf_reg_state pointer instead.
- Improved final code as a last patch.
Changes from v4:
- Merged patch nr 7 in 2.
====================
Link: https://lore.kernel.org/r/20240506141849.185293-1-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added a test for bound computation in MUL when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20240506141849.185293-7-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
MUL instruction required that src_reg would be a known value (i.e.
src_reg would be a const value). The condition in this case can be
relaxed, since the range computation algorithm used in current code
already supports a proper range computation for any valid range value on
its operands.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20240506141849.185293-6-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added a test for bound computation in XOR and OR when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-5-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Range for XOR and OR operators would not be attempted unless src_reg
would resolve to a single value, i.e. a known constant value.
This condition is unnecessary, and the following XOR/OR operator
handling could compute a possible better range.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-4-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Split range computation checks in its own function, isolating pessimitic
range set for dst_reg and failing return to a single point.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
bpf/verifier: improve code after range computation recent changes.
Link: https://lore.kernel.org/r/20240506141849.185293-3-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to further simplify the code in adjust_scalar_min_max_vals all
the calls to mark_reg_unknown are replaced by __mark_reg_unknown.
static void mark_reg_unknown(struct bpf_verifier_env *env,
struct bpf_reg_state *regs, u32 regno)
{
if (WARN_ON(regno >= MAX_BPF_REG)) {
... mark all regs not init ...
return;
}
__mark_reg_unknown(env, regs + regno);
}
The 'regno >= MAX_BPF_REG' does not apply to
adjust_scalar_min_max_vals(), because it is only called from the
following stack:
- check_alu_op
- adjust_reg_min_max_vals
- adjust_scalar_min_max_vals
The check_alu_op() does check_reg_arg() which verifies that both src and
dst register numbers are within bounds.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-2-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
and removal of an unused field.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmY35dkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgR33B/4q1lD4gyPSFHGI1pox23JXHjaBDCz/1/8S
CpIY7H7KY3QQkfJVqoO5mmI5gG9XkurHSEdITVoGEo+M3rqM9yhuuoraxvDKHX4n
NOuPpir0Y6bFl5IMr3tgtl/kbXCG/JIFCGmZfG218Qlsy/jm+xHWVAg+2CI5GRZ/
qKH705SPSTSuQnyATzydG/QiCIBiJmFsK0W61wzT4T/luR5iUN2ZvrrRmSy4WABi
k/A/wMeeqHE7qnnbmjprvJJbaaHPCfImPreSPXY0NZ48Fmq8pDlm/M7JhBV92NVI
Z7VJ516aJ+RrVm3bSTBij/21eeMrCdKid+jTJZ73NshrHBrfTaLl
=hTlC
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull some small Rockchip clk driver updates from Heiko Stuebner:
- A new PLL rate and missing mux on rk3568
- A missing reset line on rk3588
- Removal of an unused field in struct rockchip_mmc_clock
* tag 'v6.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
clk: rockchip: rk3588: Add reset line for HDMI Receiver
clk: rockchip: rk3568: Add missing USB480M_PHY mux
dt-bindings: reset: Define reset id used for HDMI Receiver
dt-bindings: clock: rockchip: add USB480M_PHY mux
This allows to define a GTP tunnel for dual stack MS/UE with both IPv4
and IPv6 addresses while using the same TEID via two PDP context
objects.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new protocol field to PDP context that determines the transmit path
IP protocol to encapsulate the original packets, either IPv4 or IPv6.
Relax existing netlink attribute checks to allow to specify different
family in MS and peer attributes from the control plane.
Use build helpers to tx path to encapsulate IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP according to the user-specified configuration.
From rx path, snoop for the inner protocol header since outer
skb->protocol might differ and use this to validate for valid PDP
context and to restore skb->protocol after decapsulation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add routine to attach an IPv6 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv4-in-IPv6-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add routine to attach an IPv4 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Based on the idea that ip_tunnel_get_dsfield() provides the tos field
regardless the IP version, use either iph->tos or ipv6_get_dsfield().
This comes in preparation to support for IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move debugging to the routine to build GTP packets in preparation
for supporting IPv4-in-IPv6-GTP and IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
According to TS 29.061, it is possible to see IPv6 link-local traffic in
the GTP tunnel, see 11.2.1.3.2 IPv6 Stateless Address Autoconfiguration
(IPv6 SLAAC).
Pass up these packets to the userspace daemon to handle them as control
GTP traffic.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Harald Welte reports that according to 3GPP TS 29.060:
PDN Connection: the association between a MS represented by one IPv4
address and/or one IPv6 prefix and a PDN represented by an APN.
this clearly states that IPv4 is a single address while IPv6 is a single prefix.
Then, 3GPP TS 29.061, Section 11.2.1.3:
For APNs that are configured for IPv6 address allocation, the GGSN/P-GW
shall only use the Prefix part of the IPv6 address for forwarding of mobile
terminated IP packets. The size of the prefix shall be according to the maximum
prefix length for a global IPv6 address as specified in the IPv6 Addressing
Architecture, see RFC 4291 [82].
RFC 4291 section 2.5.4 states
All Global Unicast addresses other than those that start with binary 000
have a 64-bit interface ID field (i.e., n + m = 64) ...
3GPP TS 29.61 Section 11.2.1.3.2a:
In the procedure in the cases of using GTP-based S5/S8, P-GW acts as an
access router, and allocates to a UE a globally unique /64 IPv6 prefix if the
PLMN allocates the prefix.
Therefore, compare IPv6 address /64 prefix only since MS/UE is not a single
address like in the IPv4 case.
Reject IPv6 address with EADDRNOTAVAIL if it lower 64 bits of the IPv6 address
from the control plane are set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new iflink attributes to configure in-kernel UDP listener socket
address: IFLA_GTP_LOCAL and IFLA_GTP_LOCAL6. If none of these attributes
are specified, default is still to IPv4 INADDR_ANY for backward
compatibility.
Add new attributes to set up family and IPv6 address of GTP tunnels:
GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6. If no GTPA_FAMILY is
specified, AF_INET is assumed for backward compatibility.
setsockopt IPV6_ADDRFORM allows to downgrade socket from IPv6 to IPv4
after socket is bound. Assumption is that socket listener that is
attached to the gtp device needs to be either IPv4 or IPv6. Therefore,
GTP socket listener does not allow for IPv4-mapped-IPv6 listener.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently GTP packets are dropped if the next extension field is set to
non-zero value, but this are valid GTP packets.
TS 29.281 provides a longer header format, which is defined as struct
gtp1_header_long. Such long header format is used if any of the S, PN, E
flags is set.
This long header is 4 bytes longer than struct gtp1_header, plus
variable length (optional) extension headers. The next extension header
field is zero is no extension header is provided.
The extension header is composed of a length field which includes total
number of 4 byte words including the extension header itself (1 byte),
payload (variable length) and next type (1 byte). The extension header
size and its payload is aligned to 4 bytes.
A GTP packet might come with a chain extensions headers, which makes it
slightly cumbersome to parse because the extension next header field
comes at the end of the extension header, and there is a need to check
if this field becomes zero to stop the extension header parser.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Update b20dc3c684 ("gtp: Allow to create GTP device without FDs") to
remove useless initialization to NULL, sockets are initialized to
non-NULL just a few lines of code after this.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should not use any CONFIG switches in uapi headers since
these only work during kernel compilation. They are not defined
for userspace. Let's use the __mcoldfire__ switch from the
compiler here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
In "struct lpc32xx_kscan_drv", the 'irq' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
While at it, move the 'row_shift' field in order to fill a hole in the
structure (at least on 64 bits arch).
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e006dfb77e35762c6e4f8ba6ba792b0c52fde375.1714545542.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit defc9cd826 ("pata_legacy: resychronize with upstream changes and
resubmit") missed to update legacy_exit(), so that it now fails to do any
cleanup -- the loop body there can never be entered. Fix that and finally
remove now useless nr_legacy_host variable...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: defc9cd826 ("pata_legacy: resychronize with upstream changes and resubmit")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add a check for the return value of pci_alloc_irq_vectors() and return
error if it fails.
[jkosina@suse.com: reworded changelog based on Srinivas' suggestion]
Fixes: 74fbc7d371 ("HID: intel-ish-hid: add MSI interrupt support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When building either tools/bpf/bpftool, or tools/testing/selftests/hid,
(the same Makefile is used for these), clang generates many instances of
the following:
"clang: warning: -lLLVM-17: 'linker' input unused"
Quentin points out that the LLVM version is only required in $(LIBS),
not in $(CFLAGS), so the fix is to remove it from CFLAGS.
Suggested-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240505230054.13813-1-jhubbard@nvidia.com
This patch enhances the firmware reset handler in the Intel Integrated
Sensor Hub (ISH) driver. Previously, the ISH firmware would send a
MNG_RESET_NOTIFY message in response to an empty IPC message from the
ish_wakeup function. With the introduction of the feature to load ISH
firmware from the host on the LunarLake platform, the ISH bootloader
now involves the IPC function. This results in an additional
MNG_RESET_NOTIFY message being sent by ISH bootloader after power on.
Consequently, the driver receives two MNG_RESET_NOTIFY messages during
system boot up. This can disrupt the dev->dev_state during the first
reset flow due to the subsequent reset notify message.
To address this, the patch modifies the fw_reset_work_fn function to skip
the execution of ishtp_reset_compl_handler during the first reset flow if
a reset is pending. The ishtp_reset_compl_handler will then be executed
during the second reset flow, ensuring the dev->dev_state is not disrupted.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Starting from the Lunar Lake generation, the ISH firmware has been
divided into two components for better space optimization and increased
flexibility. These components include a bootloader that is integrated
into the BIOS, and a main firmware that is stored within the operating
system's file system.
Introduce support for loading ISH main firmware from host. This feature is
applicable for Lunar Lake and later generation.
Current intel-ishtp-loader, is designed for Chrome OS based systems which
uses core boot and has different firmware loading method. For non chrome
systems the ISH firmware loading uses different method.
Key differences include:
1. The new method utilizes ISHTP capability/fixed client to enumerate the
firmware loader function. It does not require a connection or flow control,
unlike the method used in Chrome OS, which is enumerated as an ISHTP
dynamic client driver, necessitating connect/disconnect operations and flow
control.
2. The new method employs a table to describe firmware fragments, which are
sent to ISH in a single operation. Conversely, the Chrome OS method sends
firmware fragments in multiple operations within a loop, sending only one
fragment at a time.
Additionally, address potential error scenarios to ensure graceful failure
handling.
- Firmware Not Found: Triggers if request_firmware() fails, leaving ISH in
a waiting state.
Recovery: Re-insmod the ISH drivers to retry.
- DMA Buffer Allocation Failure: Occurs during prepare_dma_bufs(), leading
to ISH waiting state. Allocated resources are released.
Recovery: Re-insmod the ISH drivers to retry.
- Incorrect Firmware Image: Causes ISH to refuse loading after three failed
attempts.
Recovery: A platform reset is required.
Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst)
for the details on flows.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Introduces a new structure, ishtp_driver_data, to hold driver-specific
data, including the firmware filename for different hardware variants of
the Intel Integrated Sensor Hub (ISH).
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add a section to describe the ISH firmware loading process for Lunar Lake
and later generations.
Signed-off-by: Qianru Huang <qianru.huang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
