Commit graph

1,308,922 commits

Author SHA1 Message Date
Gustavo Sousa
cba22c911c drm/xe/xe2lpg: Extend Wa_14020338487
Wa_14020338487 also applies to Xe2_LPG. Replicate the existing entry to
one specific for Xe2_LPG.

Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417212501.312346-1-gustavo.sousa@intel.com
2024-04-18 11:01:56 -07:00
Sudeep Holla
02c19d84c7 firmware: arm_ffa: Add support for FFA_MSG_SEND2
The FFA_MSG_SEND2 can be  used to transmit a partition message from
the Tx buffer of the sender(the driver in this case) endpoint to the Rx
buffer of the receiver endpoint.

An invocation of the FFA_MSG_SEND2 transfers the ownership of the Tx
buffer to the receiver endpoint(or any intermediate consumer). Completion
of an FFA_MSG_SEND2 invocation transfers the ownership of the buffer
back to the sender endpoint.

The framework defines the FFA_MSG_SEND2 interface to transmit a partition
message from the Tx buffer of the sender to the Rx buffer of a receiver
and inform the scheduler that the receiver must be run.

Link: https://lore.kernel.org/r/20240417090931.2866487-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-04-18 18:29:50 +01:00
Sudeep Holla
3c258bf6bf firmware: arm_ffa: Stash the partition properties for query purposes
The properies obtained from the partition information descriptor as
part of initial partitions discovery is useful as it contain info
if the partition
- Runs in AArch64 or AArch32 execution state
- Can send and/or receive direct requests
- Can send and receive indirect message
- Does support receipt of notifications.

These can be used for querying before attempting to do any of the
above operations.

Link: https://lore.kernel.org/r/20240417090921.2866447-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-04-18 18:29:49 +01:00
Linus Torvalds
360a348fd7 gpio fixes for v6.9-rc5
- use -ENOTSUPP consistently in Intel GPIO drivers
 - don't include dt-bindings headers in gpio-swnode code
 - add missing of device table to gpio-lpc32xx and fix autoloading
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmYhU+kACgkQEacuoBRx
 13JciBAA1g9y9A9fqMSEr9a4Ir7ymeRPDNiVEd4Y4e+e35DlmTsdH3xl/W3Ln2wM
 PDCog5MnvPw+RFbc8Ie04wP9EvwMKddYxWpVg+5TO5Sgw9slcSjp8D1BBN0h8M0X
 xVjG+t/Kp3I8Rmlkc7JQDQY0uWbi9N3e7qBEY74ftBdMOe6lzWDAwL5xriN1DcDM
 x+Pz0ruysH/jexZ3XpbzphxfPORa3ZGsLl9x3ALUgmIpSNuQjGBJScFMqzm2mK81
 3j4BfyCn65TKcBBumhwtjKAHEIIDZGi7iaRjr5TKXHGf1+y1Gc2TOWfrQjo/nYWY
 9zPqlZaW4sLUjx7R7gLz7LtiDGLCOvCHfmiqmcVOhYbSgthMWh0QsMraaH4TmLwA
 r4a/Cr/KXH7eCf+mJ01Bxn1bMoc4rR90FZrvOVMzIS9jijJzd/wrB83CnUuFCTu8
 mlZb+2KsGL5SdlS8mNtW5FXb3jKREpiCOOwmdCmcZdfz+gA1Gg86j2p55CqNM0mB
 1YGwohNhLVs+dwlouBlEEHuBLuwVuKH7NFDSD8s3Vz4G9BygBRscHH7uhQnxOtX1
 +BT1fRNS1HZHgsOxmMK4C95aCRFoJEza1c39Mf66TIAdqzt9wEkEQDTgcN6b8SvX
 L3k1fdmkAruFZCT/XECzTT/p5T5hj1syStL209MhA6X+Yvr5/zA=
 =ka+M
 -----END PGP SIGNATURE-----

Merge tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio fixes from Bartosz Golaszewski:

 - use -ENOTSUPP consistently in Intel GPIO drivers

 - don't include dt-bindings headers in gpio-swnode code

 - add missing of device table to gpio-lpc32xx and fix autoloading

* tag 'gpio-fixes-for-v6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: swnode: Remove wrong header inclusion
  gpio: lpc32xx: fix module autoloading
  gpio: crystalcove: Use -ENOTSUPP consistently
  gpio: wcove: Use -ENOTSUPP consistently
2024-04-18 10:18:03 -07:00
Ivan Orlov
9259a47216 string_kunit: Add test cases for str*cmp functions
Currently, str*cmp functions (strcmp, strncmp, strcasecmp and
strncasecmp) are not covered with tests. Extend the `string_kunit.c`
test by adding the test cases for them.

This patch adds 8 more test cases:

1) strcmp test
2) strcmp test on long strings (2048 chars)
3) strncmp test
4) strncmp test on long strings (2048 chars)
5) strcasecmp test
6) strcasecmp test on long strings
7) strncasecmp test
8) strncasecmp test on long strings

These test cases aim at covering as many edge cases as possible,
including the tests on empty strings, situations when the different
symbol is placed at the end of one of the strings, etc.

Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/20240417233033.717596-1-ivan.orlov0322@gmail.com
Signed-off-by: Kees Cook <keescook@chromium.org>
2024-04-18 10:14:19 -07:00
Ard Biesheuvel
34e526cb7d arm64/head: Disable MMU at EL2 before clearing HCR_EL2.E2H
Even though the boot protocol stipulates otherwise, an exception has
been made for the EFI stub, and entering the core kernel with the MMU
enabled is permitted. This allows a substantial amount of cache
maintenance to be elided, wich is significant when fast boot times are
critical (e.g., for booting micro-VMs)

Once the initial ID map has been populated, the MMU is disabled as part
of the logic sequence that puts all system registers into a known state.
Any code that needs to execute within the window where the MMU is off is
cleaned to the PoC explicitly, which includes all of HYP text when
entering at EL2.

However, the current sequence of initializing the EL2 system registers
is not safe: HCR_EL2 is set to its nVHE initial state before SCTLR_EL2
is reprogrammed, and this means that a VHE-to-nVHE switch may occur
while the MMU is enabled. This switch causes some system registers as
well as page table descriptors to be interpreted in a different way,
potentially resulting in spurious exceptions relating to MMU
translation.

So disable the MMU explicitly first when entering in EL2 with the MMU
and caches enabled.

Fixes: 6178617038 ("efi: arm64: enter with MMU and caches enabled")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org> # 6.3.x
Acked-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240415075412.2347624-6-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-04-18 18:00:55 +01:00
Ard Biesheuvel
2b504e1620 arm64/head: Drop unnecessary pre-disable-MMU workaround
The Falkor erratum that results in the need for an ISB before clearing
the M bit in SCTLR_ELx only applies to execution at exception level x,
and so the workaround is not needed when disabling the EL1 MMU while
running at EL2.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20240415075412.2347624-5-ardb+git@google.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-04-18 18:00:37 +01:00
Siddharth Vadapalli
c24cd679b0 net: ethernet: ti: am65-cpsw-nuss: cleanup DMA Channels before using them
The TX and RX DMA Channels used by the driver to exchange data with CPSW
are not guaranteed to be in a clean state during driver initialization.
The Bootloader could have used the same DMA Channels without cleaning them
up in the event of failure. Thus, reset and disable the DMA Channels to
ensure that they are in a clean state before using them.

Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Reported-by: Schuyler Patton <spatton@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://lore.kernel.org/r/20240417095425.2253876-1-s-vadapalli@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18 09:57:03 -07:00
Jose Ignacio Tornos Martinez
56f78615bc net: usb: ax88179_178a: avoid writing the mac address before first reading
After the commit d2689b6a86 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset operation, in which the default mac
address from the device is read, is not executed from bind operation and
the random address, that is pregenerated just in case, is direclty written
the first time in the device, so the default one from the device is not
even read. This writing is not dangerous because is volatile and the
default mac address is not missed.

In order to avoid this and keep the simplification to have only one
reset and reduce the delays, restore the reset from bind operation and
remove the reset that is commanded from open operation. The behavior is
the same but everything is ready for usbnet_probe.

Tested with ASIX AX88179 USB Gigabit Ethernet devices.
Restore the old behavior for the rest of possible devices because I don't
have the hardware to test.

cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Jarkko Palviainen <jarkko.palviainen@gmail.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Link: https://lore.kernel.org/r/20240417085524.219532-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-18 09:53:55 -07:00
Linus Torvalds
e4add02086 Random number generator fixes for Linux 6.9-rc5.
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEq5lC5tSkz8NBJiCnSfxwEqXeA64FAmYhOXgACgkQSfxwEqXe
 A67aWA//VLFS7tJWf6wiP+XKM5vxktakjOqEL+P9RSQJbSfM6glRt5FjmTJjP5Uq
 w0JZDk6m0aDTq1vfkcOi8D8sF6xgzn4d2LcOr8xn+KvzVnbcU7qNJe+wqTT7TxAJ
 AYcYMygc8Nt7EKWLP3EvbudzEnKJF/qLYc6kwUEUyT0PgL5tgR0+V5OeIey3YUUd
 R+X2ELe0BkMVVwB0+OOwpK05TqoGeF6y5djU4jX9YvIDMGs6lSvCv+e+Ec6+PAPw
 l3Pg/267gWOk83p8WMpdVBuoDzwyzP6n8qd0Lfjbtk2JylGCNtqek7GGFeBUmJh7
 8nlxOTJg0LJgOKoM9Hdn+Y1s18gfU4JCafRHTlHSJljvnzf6AYOStR8WKQ5fb50O
 E+0oc1mdYUjiWS8hPTmU3aT1K5TRj93yVOTATsKac8yPlEYmq6xPTWk2GqM4sdF7
 mcqihmGhVPw0SC8DVebmI8SKCmDL9rLPxbjhklBf1wTPBVaF0eePXgA8NdtKJZ6O
 qmYG6BMctL56c1YQy3nGpGw/m1jkHwcDO+9NkZqOMZAYKVvbPWxP4/3XzZnokGP/
 tqFIdZqJKanPaesbqaWyNp6UfNl1Evkxdp0jEALE8B/lYZodtfpXATCNsSTrSRwr
 LXsWwMNbQCmK9SCVRJf0aokTPw5s6hNmT30GNb/j7tDmnHFjn/o=
 =AK8k
 -----END PGP SIGNATURE-----

Merge tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

Pull random number generator fixes from Jason Donenfeld:

 - The input subsystem contributes entropy in some places where a
   spinlock is held, but the entropy accounting code only handled
   callers being in an interrupt or non-atomic process context, but not
   atomic process context. We fix this by removing an optimization and
   just calling queue_work() unconditionally.

 - Greg accidently sent up a patch not intended for his tree and that
   had been nack'd, so that's now reverted.

* tag 'random-6.9-rc5-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  Revert "vmgenid: emit uevent when VMGENID updates"
  random: handle creditable entropy from atomic process context
2024-04-18 09:49:08 -07:00
Jani Nikula
270f3a4886 drm/i915: use system include for drm headers
Use <> instead of "" for including headers from include/, even if the
file is in the same directory.

Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed02b81fcbbc0d27be4af460c521aefbfdc76375.1712743191.git.jani.nikula@intel.com
2024-04-18 19:23:44 +03:00
Qu Wenruo
fe1c6c7acc btrfs: fix wrong block_start calculation for btrfs_drop_extent_map_range()
[BUG]
During my extent_map cleanup/refactor, with extra sanity checks,
extent-map-tests::test_case_7() would not pass the checks.

The problem is, after btrfs_drop_extent_map_range(), the resulted
extent_map has a @block_start way too large.
Meanwhile my btrfs_file_extent_item based members are returning a
correct @disk_bytenr/@offset combination.

The extent map layout looks like this:

     0        16K    32K       48K
     | PINNED |      | Regular |

The regular em at [32K, 48K) also has 32K @block_start.

Then drop range [0, 36K), which should shrink the regular one to be
[36K, 48K).
However the @block_start is incorrect, we expect 32K + 4K, but got 52K.

[CAUSE]
Inside btrfs_drop_extent_map_range() function, if we hit an extent_map
that covers the target range but is still beyond it, we need to split
that extent map into half:

	|<-- drop range -->|
		 |<----- existing extent_map --->|

And if the extent map is not compressed, we need to forward
extent_map::block_start by the difference between the end of drop range
and the extent map start.

However in that particular case, the difference is calculated using
(start + len - em->start).

The problem is @start can be modified if the drop range covers any
pinned extent.

This leads to wrong calculation, and would be caught by my later
extent_map sanity checks, which checks the em::block_start against
btrfs_file_extent_item::disk_bytenr + btrfs_file_extent_item::offset.

This is a regression caused by commit c962098ca4 ("btrfs: fix
incorrect splitting in btrfs_drop_extent_map_range"), which removed the
@len update for pinned extents.

[FIX]
Fix it by avoiding using @start completely, and use @end - em->start
instead, which @end is exclusive bytenr number.

And update the test case to verify the @block_start to prevent such
problem from happening.

Thankfully this is not going to lead to any data corruption, as IO path
does not utilize btrfs_drop_extent_map_range() with @skip_pinned set.

So this fix is only here for the sake of consistency/correctness.

CC: stable@vger.kernel.org # 6.5+
Fixes: c962098ca4 ("btrfs: fix incorrect splitting in btrfs_drop_extent_map_range")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18 18:18:50 +02:00
Johannes Thumshirn
2f7ef5bb4a btrfs: fix information leak in btrfs_ioctl_logical_to_ino()
Syzbot reported the following information leak for in
btrfs_ioctl_logical_to_ino():

  BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
  BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40
   instrument_copy_to_user include/linux/instrumented.h:114 [inline]
   _copy_to_user+0xbc/0x110 lib/usercopy.c:40
   copy_to_user include/linux/uaccess.h:191 [inline]
   btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499
   btrfs_ioctl+0x714/0x1260
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:904 [inline]
   __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890
   __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890
   x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17
   do_syscall_x64 arch/x86/entry/common.c:52 [inline]
   do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
   entry_SYSCALL_64_after_hwframe+0x77/0x7f

  Uninit was created at:
   __kmalloc_large_node+0x231/0x370 mm/slub.c:3921
   __do_kmalloc_node mm/slub.c:3954 [inline]
   __kmalloc_node+0xb07/0x1060 mm/slub.c:3973
   kmalloc_node include/linux/slab.h:648 [inline]
   kvmalloc_node+0xc0/0x2d0 mm/util.c:634
   kvmalloc include/linux/slab.h:766 [inline]
   init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779
   btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480
   btrfs_ioctl+0x714/0x1260
   vfs_ioctl fs/ioctl.c:51 [inline]
   __do_sys_ioctl fs/ioctl.c:904 [inline]
   __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890
   __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890
   x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17
   do_syscall_x64 arch/x86/entry/common.c:52 [inline]
   do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
   entry_SYSCALL_64_after_hwframe+0x77/0x7f

  Bytes 40-65535 of 65536 are uninitialized
  Memory access of size 65536 starts at ffff888045a40000

This happens, because we're copying a 'struct btrfs_data_container' back
to user-space. This btrfs_data_container is allocated in
'init_data_container()' via kvmalloc(), which does not zero-fill the
memory.

Fix this by using kvzalloc() which zeroes out the memory on allocation.

CC: stable@vger.kernel.org # 4.14+
Reported-by:  <syzbot+510a1abbb8116eeb341d@syzkaller.appspotmail.com>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <Johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2024-04-18 18:18:13 +02:00
Alexei Starovoitov
462e5e2a59 bpf: Fix JIT of is_mov_percpu_addr instruction.
The codegen for is_mov_percpu_addr instruction works for rax/r8 registers
only. Fix it to generate proper x86 byte code for other registers.

Fixes: 7bdbf74463 ("bpf: add special internal-only MOV instruction to resolve per-CPU addrs")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240417214406.15788-1-alexei.starovoitov@gmail.com
2024-04-18 09:03:21 -07:00
Xiu Jianfeng
f71bfbe1e2 cgroup, legacy_freezer: update comment for freezer_css_offline()
After commit f5d39b0208 ("freezer,sched: Rewrite core freezer logic"),
system_freezing_count was replaced by freezer_active.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2024-04-18 06:01:50 -10:00
Xiu Jianfeng
c9169291be docs, cgroup: add entries for pids to cgroup-v2.rst
This patch add two entries (pids.peak and pids.events) for pids
controller, and also update pids.current because it's on non-root.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2024-04-18 06:00:58 -10:00
Xiu Jianfeng
15a0b5fe1a cgroup: don't call cgroup1_pidlist_destroy_all() for v2
Currently cgroup1_pidlist_destroy_all() will be called when releasing
cgroup even if the cgroup is on default hierarchy, however it doesn't
make any sense for v2 to destroy pidlist of v1.

Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2024-04-18 05:56:58 -10:00
Christoph Hellwig
752863bdda block: propagate partition scanning errors to the BLKRRPART ioctl
Commit 4601b4b130 ("block: reopen the device in blkdev_reread_part")
lost the propagation of I/O errors from the low-level read of the
partition table to the user space caller of the BLKRRPART.

Apparently some user space relies on, so restore the propagation.  This
isn't exactly pretty as other block device open calls explicitly do not
are about these errors, so add a new BLK_OPEN_STRICT_SCAN to opt into
the error propagation.

Fixes: 4601b4b130 ("block: reopen the device in blkdev_reread_part")
Reported-by: Saranya Muruganandam <saranyamohan@google.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240417144743.2277601-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-18 09:34:34 -06:00
Eric Biggers
9543f6e266 x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
Fix cpuid_deps[] to list the correct dependencies for GFNI, VAES, and
VPCLMULQDQ.  These features don't depend on AVX512, and there exist CPUs
that support these features but not AVX512.  GFNI actually doesn't even
depend on AVX.

This prevents GFNI from being unnecessarily disabled if AVX is disabled
to mitigate the GDS vulnerability.

This also prevents all three features from being unnecessarily disabled
if AVX512VL (or its dependency AVX512F) were to be disabled, but it
looks like there isn't any case where this happens anyway.

Fixes: c128dbfa0f ("x86/cpufeatures: Enable new SSE/AVX/AVX512 CPU features")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/20240417060434.47101-1-ebiggers@kernel.org
2024-04-18 17:27:52 +02:00
Jeff Johnson
2372c6d280 wifi: ath12k: don't use %pK in dmesg format strings
Currently, when debug logs are enabled, messages such as the following
are found in the kernel log:

event mgmt rx skb         pK-error len 209 ftype 00 stype 50

The "pK-error" comes from using %pK to display an skb address in an
interrupt context.

Per the guidance in the current "printk-formats" documentation, %pK
"is only intended when producing content of a file read by userspace
from e.g. procfs or sysfs, not for dmesg."

So replace %pK with %p in all of the ath12k_dbg() format strings.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240416-pk-v1-1-2c8852743e6d@quicinc.com
2024-04-18 18:24:08 +03:00
Thiraviyam Mariyappan
0d55f86d02 wifi: ath12k: enable service flag for survey dump stats
The survey dump statistics does not display channel RX and TX time
properly because the survey flag is not enabled in the firmware service
flag.

If firmware supports enable the service flag "bss_chan_info" in
wmi_resource_config to fetch and print the stats for specific pdev.

Enabling WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 does not have any impact
on WCN7850 since this bit is not utilized by the WCN7850 firmware.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Thiraviyam Mariyappan <quic_tmariyap@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240410085329.3649572-1-quic_kathirve@quicinc.com
2024-04-18 18:21:48 +03:00
Kalle Valo
03a509740b wifi: ath12k: enable WIPHY_FLAG_DISABLE_WEXT
ath12k will support Multi-Link Operation (MLO) in the future but not yet. A
major change with MLO is that cfg80211 will disable Wireless Extension (WEXT)
user space interface. To avoid having inconsistent user experience, first
supporting WEXT and later not, disable WEXT already now.

Now ath12k claims that WEXT is not supported:

$ iwconfig wlan0
wlan0     no wireless extensions.

Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3

Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240411165645.4071238-1-kvalo@kernel.org
2024-04-18 18:20:48 +03:00
Christophe JAILLET
6ef5b4c959 wifi: ath11k: Fix error handling in ath11k_wmi_p2p_noa_event()
if (noa_descriptors > WMI_P2P_MAX_NOA_DESCRIPTORS), there is a mix of
return and goto. In such a case, 'td' should be freed to avoid a memory
leak.

While at it, change ath11k_wmi_p2p_noa_event() to return void.
'0' was returned in all cases, even in case of error and the only caller
does not handle the return value.
This is also more consistent with most of functions called from
ath11k_wmi_tlv_op_rx().

Fixes: 2408379f15 ("wifi: ath11k: implement handling of P2P NoA event")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/07f1fc75b2d5b4173ae1b7bb1da5be7f6fc608c8.1713212781.git.christophe.jaillet@wanadoo.fr
2024-04-18 18:20:08 +03:00
Christian Lamparter
43528ae9d9 wifi: ath11k: add support DT ieee80211-freq-limit
The common DT property can be used to limit the available
channels/frequencies. But ath11k has to manually call
wiphy_read_of_freq_limits().

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/ed266944c721de8dbf0fe35f387a3a71b2c84037.1686486468.git.chunkeey@gmail.com
2024-04-18 18:19:09 +03:00
Christian Lamparter
30ba0022b3 dt-bindings: net: wireless: ath11k: add ieee80211-freq-limit property
This is an existing optional property that ieee80211.yaml/cfg80211
provides. It's useful to further restrict supported frequencies
for a specified device through device-tree.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/fc606d2550d047a53b4289235dd3c0fe23d5daac.1686486468.git.chunkeey@gmail.com
2024-04-18 18:19:09 +03:00
David Woodhouse
fbaad243b5 arm64: acpi: Honour firmware_signature field of FACS, if it exists
If the firmware_signature changes then OSPM should not attempt to resume
from hibernate, but should instead perform a clean reboot. Set the global
swsusp_hardware_signature to allow the generic code to include the value
in the swsusp header on disk, and perform the appropriate check on resume.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240412073530.2222496-3-dwmw2@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-18 16:17:33 +01:00
David Woodhouse
bc5b492ac3 ACPICA: Detect FACS even for hardware reduced platforms
ACPICA commit 44fc328a1a14b097d92b8be83989e4bf69b6e6cb

The FACS is optional even on hardware reduced platforms, and may exist
for the purpose of communicating the hardware_signature field to provoke
a clean reboot instead of a resume from hibernation.

Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20240412073530.2222496-2-dwmw2@infradead.org
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-18 16:17:33 +01:00
Daniele Palmas
582ee2f9d2 USB: serial: option: add Telit FN920C04 rmnet compositions
Add the following Telit FN920C04 compositions:

0x10a0: rmnet + tty (AT/NMEA) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  5 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a0 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10a4: rmnet + tty (AT) + tty (AT) + tty (diag)
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  8 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a4 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=86(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

0x10a9: rmnet + tty (AT) + tty (diag) + DPL (data packet logging) + adb
T:  Bus=03 Lev=01 Prnt=03 Port=06 Cnt=01 Dev#=  9 Spd=480  MxCh= 0
D:  Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=1bc7 ProdID=10a9 Rev=05.15
S:  Manufacturer=Telit Cinterion
S:  Product=FN920
S:  SerialNumber=92c4c4d8
C:  #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=84(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=80 Driver=(none)
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none)
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-18 17:14:49 +02:00
Charlie Jenkins
decde1fa20
cpumask: Add assign cpu
Standardize an assign_cpu function for cpumasks.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-4-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-04-18 08:11:00 -07:00
Charlie Jenkins
6a08e4709c
documentation: Document PR_RISCV_SET_ICACHE_FLUSH_CTX prctl
Provide documentation that explains how to properly do CMODX in riscv.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-3-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-04-18 08:10:59 -07:00
Charlie Jenkins
6b9391b581
riscv: Include riscv_set_icache_flush_ctx prctl
Support new prctl with key PR_RISCV_SET_ICACHE_FLUSH_CTX to enable
optimization of cross modifying code. This prctl enables userspace code
to use icache flushing instructions such as fence.i with the guarantee
that the icache will continue to be clean after thread migration.

Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-2-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-04-18 08:10:58 -07:00
Umang Jain
75ff53c44f staging: vc04_services: Drop completed TODO item
The memory barrier comments are added in
commit f6c99d8624 ("staging: vchiq_arm: Add missing memory barrier comments")

Drop the respective item from the TODO list.

Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-12-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:33 +02:00
Umang Jain
42a2f6664e staging: vc04_services: Move global g_state to vchiq_state
The patch intended to drop the g_state pointer.
g_state is supposed to be a central place to track the state
via vchiq_state. This is now moved to be contained in the
struct vchiq_drv_mgmt. As a result vchiq_get_state() is also removed.

In order to have access to vchiq_drv_mgmt, vchiq_initialise()
and vchiq_mmal_init() are modified to receive a struct device pointer
as one of their function parameter

The vchiq_state pointer is now passed directly to
vchiq_dump_platform_instances() to get access to the state instead
getting it via vchiq_get_state().

For the char device, struct miscdevice is retrieved by struct file's
private data in vchiq_open and struct vchiq_drv_mgmt is retrieved
thereafter.

Removal of global variable members is now addressed hence, drop
the corresponding item from the TODO list.

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-11-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:33 +02:00
Umang Jain
7f56c601ca staging: vc04_services: vchiq_mmal: Rename service_callback()
Rename the service_callback static function to mmal_service_callback()
since the function signature conflicts with:

extern int
service_callback(struct vchiq_instance *vchiq_instance, enum vchiq_reason reason,
                 struct vchiq_header *header, unsigned int handle, void *bulk_userdata);

in vc04_services/interface/vchiq_arm/vchiq_arm.h

In a subsequent patch, we will include vchiq_arm.h header to
mmal-vchiq.c, which will then complain of this conflict. Hence,
this patch is meant to handle the conflict beforehand.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-10-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:33 +02:00
Umang Jain
12cc5f92c1 staging: vc04_services: Move spinlocks to vchiq_state
The msg_queue_spinlock, quota_spinlock and bulk_waiter_spinlock
are allocated globally. Instead move them to struct vchiq_state
and initialise them in vchiq_init_state().

Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-9-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:33 +02:00
Umang Jain
6d0ef3214d staging: vc04_services: Move global memory mapped pointer
g_regs stores the remapped memory pointer for the vchiq platform.
It can be moved to struct vchiq_drv_mgmt instead of being global.

Adjust the affected functions accordingly. Pass vchiq_state pointer
wherever necessary to access struct vchiq_drv_mgmt.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-8-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:33 +02:00
Umang Jain
39fbff9dfc staging: vc04_services: Move global variables tracking allocated pages
The variables tracking allocated pages fragments in vchiq_arm.c
can be easily moved to struct vchiq_drv_mgmt instead of being global.
This helps us to drop the non-essential global variables in the vchiq
interface.

No functional changes intended in this patch.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-7-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:32 +02:00
Umang Jain
f875976ecf staging: vc04_services: Drop vchiq_connected.[ch] files
The vchiq_connected.[ch] just implements two function:

- vchiq_add_connected_callback()
- vchiq_call_connected_callbacks()

for the deferred vchiq callbacks. Those can easily live in
vchiq_arm.[ch], hence move them. This allows making the
vchiq_call_connected_callbacks() function static.

The move doesn't copy over MAX_CALLBACKS because it is the same as
VCHIQ_DRV_MAX_CALLBACKS. Hence, it now being used in
vchiq_add_connected_callback().

No functional changes intended in this patch.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-6-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:32 +02:00
Umang Jain
e1c0af4f3c staging: vc04_services: Move variables for tracking connections
Connections to the vchiq driver are tracked using global variables.
Drop those and introduce them as members of struct vchiq_drv_mgmt.
Hence, struct vchiq_drv_mgmt will be used to track the connections.

Also, store a vchiq_drv_mgmt pointer to struct vchiq_device to
have easy access to struct vchiq_drv_mgmt across vchiq devices.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Link: https://lore.kernel.org/r/20240412075743.60712-5-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:32 +02:00
Umang Jain
8c9753f639 staging: vc04_services: vchiq_arm: Drop g_cache_line_size
The cache-line-size is cached in struct vchiq_platform_info.
There is no need to cache this again via g_cache_line_size
and use it. Instead use the value from vchiq_platform_info directly.

While at it, move the comment about L2 cache line size in the kerneldoc
block of struct vchiq_platform_info.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-4-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:32 +02:00
Umang Jain
1c9e16b731 staging: vc04_services: vchiq_arm: Split driver static and runtime data
vchiq_drvdata combines two types of book-keeping data. There is
platform-specific static data (for e.g. cache lines size) and then
data needed for book-keeping at runtime.

Split the data into two structures: struct vchiq_platform_info and
struct vchiq_drv_mgmt. The vchiq_drv_mgmt is allocated at runtime
during probe and will be extended in subsequent patches to remove
all global variables allocated.

No functional changes intended in this patch.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-3-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:32 +02:00
Umang Jain
e82b22539a staging: vc04_services: Drop g_once_init global variable
g_once_init is not used in a meaningful way anywhere. Drop it
along with connected_init() which sets it.

Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240412075743.60712-2-umang.jain@ideasonboard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:53:32 +02:00
Sumadhura Kalyan
e0279bb86b staging: vc04_services: Re-align function parameters
Checkpatch complains that:

CHECK: Lines should not end with a '('
+typedef void (*vchiq_mmal_buffer_cb)(

Re-align the function parameters to make checkpatch happy.

Signed-off-by: Sumadhura Kalyan <opensourcecond@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240415171138.5849-1-opensourcecond@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:52:58 +02:00
Ulf Hansson
0cebf7cb2d pmdomain: core: Don't clear suspended_count at genpd_prepare()
There is no longer any need to clear genpd->suspended_count in
genpd_prepare(), as it should be correctly incremented and decremented for
all cases. In fact, if the counter isn't correctly managed we would be
hiding a problem that we shouldn't. Therefore, let's not clear it.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240412104208.74361-2-ulf.hansson@linaro.org
2024-04-18 16:52:47 +02:00
Ulf Hansson
5af7f593be pmdomain: core: Update the rejected/usage counters at system suspend too
During system suspend we may try to enter a low power-state for the genpd
in question. Let's take this into account for the statistics too, by
updating the rejected/usage counters for the corresponding state.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240412104208.74361-1-ulf.hansson@linaro.org
2024-04-18 16:52:47 +02:00
Stefan Wahren
acf2192167 staging: vchiq: Reformat Kconfig help texts
The lines in the VCHIQ Kconfig help texts are too long, which makes
it hard to read the menuconfig. So reformat them to restore the
readability.

Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20240414192257.6011-1-wahrenst@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-18 16:52:46 +02:00
Geert Uytterhoeven
fdea114ac2 pmdomain: renesas: rcar-sysc: Add R-Car M3-W power-off delay quirk
R-Car M3-W needs a delay of 1 µs before powering off the A3IR and A3VC
power domains.  Add support for this using a new flag, which indicates
that a power area is subject to this quirk.

Inspired by a patch in the BSP by Dien Pham.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/ecbc3465c598084c904dd3714e2894463094ed9a.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-18 16:52:00 +02:00
Geert Uytterhoeven
c8d8770444 pmdomain: renesas: rcar-sysc: Remove rcar_sysc_nullify() helper
There are no more users left of the rcar_sysc_nullify() helper, so it
can be removed.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/ad61b09283cc8a9cf93a5ea9fffd1cb283b9db92.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-18 16:51:56 +02:00
Geert Uytterhoeven
43fefaea06 pmdomain: renesas: rcar-sysc: Split R-Car M3-W and M3-W+ sub-drivers
Currently R-Car M3-W and M3-W+ are handled by a single sub-driver,
but using separate Kconfig symbols and separate rcar_sysc_info
structures, and fixup code to handle the remaining differences.

Prepare for handling more differences by splitting them in two separate
sub-drivers.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/a416e2bae7227c08d7e7d158366ab021f4d6cc18.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-18 16:51:50 +02:00
Geert Uytterhoeven
ce5e83925c pmdomain: renesas: rcar-sysc: Absorb rcar_sysc_ch into rcar_sysc_pd
Until commit 7e8a50df26 ("soc: renesas: rcar-sysc: Drop legacy
handling") in v4.19, the rcar_sysc_ch structure was part of the API for
legacy board code not yet using DT.  Since then, there is no longer a
reason to keep it as a separate structure.

Moreover, a future quirk handling will need access to the rcar_sysc_pd
structure's flags member in rcar_sysc_pwr_on_off().  Hence absorb the
rcar_sysc_ch structure into the rcar_sysc_pd structure, and pass around
the latter instead of the former.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/672805a8c52ce63200e342212bbe6f84a445397b.1713348705.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-18 16:51:28 +02:00