Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-12-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-9-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-8-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-6-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-18-4517b091385b@linaro.org
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-2-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-19-4517b091385b@linaro.org
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-17-4517b091385b@linaro.org
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-16-4517b091385b@linaro.org
Acked-by: Vinod Koul <vkoul@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-14-4517b091385b@linaro.org
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-13-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-10-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-7-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-4-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Amba bus core already sets owner, so driver does not need to.
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-3-4517b091385b@linaro.org
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Modules registering driver with amba_driver_register() often forget to
set .owner field. The field is used by some of other kernel parts for
reference counting (try_module_get()), so it is expected that drivers
will set it.
Solve the problem by moving this task away from the drivers to the core
amba bus code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Link: https://lore.kernel.org/r/20240326-module-owner-amba-v1-1-4517b091385b@linaro.org
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Alex Elder says:
====================
net: ipa: header hygiene
The end result of this series is that the list of files included in
every IPA source file will be maintained in sorted order. This
imposes some consistency that was previously not possible.
If an IPA header file requires a symbol or type declared in another
header, that other header must be included. E.g., if bool or u32
type is used in a function declaration in an IPA header file, the
IPA header must include <linux/types.h>.
If a type used is just a struct or union *pointer* or enum type (and
no members within these types are needed), then these types only need
to be *declared* within the header that uses it.
This is sufficient, but in addition, this series removes includes of
files that aren't necessary, as well as unneeded type declarations.
====================
Link: https://lore.kernel.org/r/20240416231018.389520-1-elder@linaro.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Establish the rule that header files are always included in sorted
(POSIX local) order. Standard and private headers are separated by
a blank line.
Similarly, sort all forward-declarations for structures.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All of the config data files and all of the register definition
files (plus a few others) use GSI_EE_AP, which is defined in
"ipa_version.h". Include that header where it's needed.
All of the IPA register definition files include "../ipa.h", though
none of them need anything defined there. Similarly, all of the GSI
register definition files include "../gsi.h", but don't need anything
defined there. Remove these unnneded includes.
All of the configuration data files include "../gsi.h", though none
of them need anything defined there, so remove these includes.
Remove other includes of local header files that are not required.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As definitions in headers have been moved around, some of the
struct and enum declarations found in header files have become
no longer necessary and can be removed. Remove these unneeded
declarations.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Declare some structure types in a few header files where functions
declared therein use them:
- Functions are declared in "gsi_private.h" that use gsi, gsi_ring, and
gsi_trans structure pointers.
- A gsi_trans struct pointer is passed to two functions
declared in "ipa_endpoint.h"
- In "ipa_interrupt.h", a platform_device pointer is passed in the
declaration for ipa_interrupt_init().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The IPA structure contains an ipa_interrupt structure pointer, and
that structure is declared in "ipa.h". There is no need to include
"ipa_interrupt.h" in that header file.
Instead, include "ipa_interrupt.h" in the three source files (in
addition to "ipa_main.c") that actually use the functions that are
declared there.
Similarly, three files use symbols defined in "ipa_reg.h" but do not
include that file; include it.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some IPA header files include one or more other standard header
files despite not directly needing anything defined in the included
files. Remove these unnecessary includes.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some IPA header files use types defined in <linux/types.h>, but do
not include that file:
- In "ipa_mem.h", the ipa_mem structure has u16 and u32 fields
- In "ipa_power.h", ipa_power_retention() takes a bool argument,
and ipa_core_clock_rate() returns u32
- In "ipa_version.h", ipa_version_supported() returns bool
Include it in these files to satisfy their dependencies.
The ipa_qmi structure (defined in "ipa_qmi.h") contains a work
structure, so include <linux/workqueue.h> in there.
All of the data and register definition files, as well as "reg.h",
use the ARRAY_SIZE() macro. Include <linux/array_size.h> everywhere
it's used.
Similarly, all register definition files (and a few others) use the
GENMASK() macro, so include <linux/bits.h> to ensure it's defined
where used. BIT() becomes available by including this file also.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the firmware returns incorrect SRI/NRI number, we fail to set it up
in the kernel which is absolutely fine.
However, we don't reset the stashed value of sched_recv or notif_pend
IRQs. When we call ffa_notifications_cleanup() in case of failures to
setup the notifications, we end up calling free_percpu_irq() from
ffa_uninit_pcpu_irq() which results in the following warning:
| genirq: Flags mismatch irq 6. 00004401 (ARM-FFA-NPI) vs. 00004400 (IPI)
| ARM FF-A: Error registering percpu NPI nIRQ 6 : -16
| ARM FF-A: Notification setup failed -16, not enabled
| ------------[ cut here ]------------
| Trying to free already-free IRQ 6
| WARNING: CPU: 2 PID: 1 at kernel/irq/manage.c:2476 __free_percpu_irq+0x6c/0x138
| Modules linked in:
| CPU: 2 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc3 #211
| Hardware name: FVP Base RevC (DT)
| pstate: 614000c9 (nZCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : __free_percpu_irq+0x6c/0x138
| lr : __free_percpu_irq+0x6c/0x138
| Call trace:
| __free_percpu_irq+0x6c/0x138
| free_percpu_irq+0x48/0x84
| ffa_notifications_cleanup+0x78/0x164
| ffa_notifications_setup+0x368/0x3c0
| ffa_init+0x2b4/0x36c
| do_one_initcall+0xe0/0x258
| do_initcall_level+0x8c/0xac
| do_initcalls+0x54/0x94
| do_basic_setup+0x1c/0x28
| kernel_init_freeable+0x108/0x174
| kernel_init+0x20/0x1a4
| ret_from_fork+0x10/0x20
Fix the same by resetting the stashed copy of IRQ values to 0 in case
of any failure to set them up properly.
Cc: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240418102932.3093576-1-sudeep.holla@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Replace the open coded drm_crtc_vblank_crtc() with the real
thing.
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Melissa Wen <melissa.srw@gmail.com>
Cc: "Maíra Canal" <mairacanal@riseup.net>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-5-ville.syrjala@linux.intel.com
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Make life easier by providing a function that hands
out the correct drm_vblank_crtc for a given a drm_crtc.
Also abstract the lower level internals of the vblank
code in a similar fashion.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240408190611.24914-1-ville.syrjala@linux.intel.com
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
In ibmvnic_xmit() if ibmvnic_tx_scrq_flush() returns H_CLOSED then
it will inform upper level networking functions to disable tx
queues. H_CLOSED signals that the connection with the vnic server is
down and a transport event is expected to recover the device.
Previously, ibmvnic_tx_scrq_flush() was hard-coded to return success.
Therefore, the queues would remain active until ibmvnic_cleanup() is
called within do_reset().
The problem is that do_reset() depends on the RTNL lock. If several
ibmvnic devices are resetting then there can be a long wait time until
the last device can grab the lock. During this time the tx/rx queues
still appear active to upper level functions.
FYI, we do make a call to netif_carrier_off() outside the RTNL lock but
its calls to dev_deactivate() are also dependent on the RTNL lock.
As a result, large amounts of retransmissions were observed in a short
period of time, eventually leading to ETIMEOUT. This was specifically
seen with HNV devices, likely because of even more RTNL dependencies.
Therefore, ensure the return code of ibmvnic_tx_scrq_flush() is
propagated to the xmit function to allow for an earlier (and lock-less)
response to a transport event.
Signed-off-by: Nick Child <nnac123@linux.ibm.com>
Link: https://lore.kernel.org/r/20240416164128.387920-1-nnac123@linux.ibm.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When line locked as IRQ it has no label assigned. Assign
the meaningful value to it.
Ex. (for the PCA9355 and MAX3111e chips connected to the system):
=== Before ===
PCA953x: interrupt
MAX3111e: interrupt
=== After ===
PCA953x: NIO1 GpioInt(0)
MAX3111e: URT0 GpioInt(0)
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Inter-process communication on localhost should be established successfully
even the ARP table is full, many processes on server machine use the
localhost to communicate such as command-line interface (CLI),
servers hope all CLI commands can be executed successfully even the arp
table is full. Right now CLI commands got timeout when the arp table is
full. Set the parameter of exempt_from_gc to be true for LOOPBACK net
device to keep localhost neigh in arp table, not removed by gc.
the steps of reproduced:
server with "gc_thresh3 = 1024" setting, ping server from more than 1024
same netmask Lan IPv4 addresses, run "ssh localhost" on console interface,
then the command will get timeout.
Signed-off-by: Zheng Li <James.Z.Li@Dell.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240416095343.540-1-lizheng043@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a mechanism to be able to tag vendor protocol modules at compile-time
with a vendor/sub_vendor string and an implementation version and then to
choose to load, at run-time, only those vendor protocol modules matching
as close as possible the vendor/subvendor identification advertised by
the SCMI platform server.
In this way, any in-tree existent vendor protocol module can be build and
shipped by default in a single kernel image, even when using the same
clashing protocol identification numbers, since the SCMI core will take
care at run-time to load only the ones pertinent to the running system.
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20240418095121.3238820-2-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
It's ambiguous to have a device-related index in the GPIO interrupt
label as most of the devices will have it the same or very similar.
Extend label with fwnode name for better granularity. It significantly
reduces the scope of searching among devices.
Ex. (for the PCA9355 and MAX3111e chips connected to the system):
=== Before ===
PCA953x: GpioInt() 0
MAX3111e: GpioInt() 0
=== After ===
PCA953x: NIO1 GpioInt(0)
MAX3111e: URT0 GpioInt(0)
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The UDP_ENCAP_ESPINUDP_NON_IKE mode, introduced into the Linux kernel
in 2004 [2], has remained inactive and obsolete for an extended period.
This mode was originally defined in an early version of an IETF draft
[1] from 2001. By the time it was integrated into the kernel in 2004 [2],
it had already been replaced by UDP_ENCAP_ESPINUDP [3] in later
versions of draft-ietf-ipsec-udp-encaps, particularly in version 06.
Over time, UDP_ENCAP_ESPINUDP_NON_IKE has lost its relevance, with no
known use cases.
With this commit, we remove support for UDP_ENCAP_ESPINUDP_NON_IKE,
simplifying the codebase and eliminating unnecessary complexity.
Kernel will return an error -ENOPROTOOPT if the userspace tries to set
this option.
References:
[1] https://datatracker.ietf.org/doc/html/draft-ietf-ipsec-udp-encaps-00.txt
[2] Commit that added UDP_ENCAP_ESPINUDP_NON_IKE to the Linux historic
repository.
Author: Andreas Gruenbacher <agruen@suse.de>
Date: Fri Apr 9 01:47:47 2004 -0700
[IPSEC]: Support draft-ietf-ipsec-udp-encaps-00/01, some ipec impls need it.
[3] Commit that added UDP_ENCAP_ESPINUDP to the Linux historic
repository.
Author: Derek Atkins <derek@ihtfp.com>
Date: Wed Apr 2 13:21:02 2003 -0800
[IPSEC]: Implement UDP Encapsulation framework.
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Paul Barker says:
====================
ravb Ethernet driver bugfixes
These patches fix bugs found during recent work on the ravb driver.
Patches 1 & 2 affect the R-Car code paths so have been tested on an
R-Car M3N Salvator-XS board - this is the only R-Car board I currently
have access to.
Patches 2, 3 & 4 affect the GbEth code paths so have been tested on
RZ/G2L and RZ/G2UL SMARC EVK boards.
Changes v2->v3:
* Incorporate feedback from Niklas and add Reviewed-by tag to patch
"net: ravb: Count packets instead of descriptors in R-Car RX path".
Changes v1->v2:
* Fixed typos in commit message of patch
"net: ravb: Allow RX loop to move past DMA mapping errors".
* Added Sergey's Reviewed-by tags.
* Expanded Cc list as Patchwork complained that I had missed people.
* Trimmed the call trace in accordance with the docs [1] in patch
"net: ravb: Fix GbEth jumbo packet RX checksum handling".
[1]: https://docs.kernel.org/process/submitting-patches.html#backtraces-in-commit-messages
====================
Link: https://lore.kernel.org/r/20240416120254.2620-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX byte accounting for jumbo packets was changed to fix a potential
use-after-free bug. However, that fix used the wrong variable and so
only accounted for the number of bytes in the final descriptor, not the
number of bytes in the whole packet.
To fix this, we can simply update our stats with the correct number of
bytes before calling napi_gro_receive().
Also rename pkt_len to desc_len in ravb_rx_gbeth() to avoid any future
confusion. The variable name pkt_len is correct in ravb_rx_rcar() as
that function does not handle packets spanning multiple descriptors.
Fixes: 5a5a3e564d ("ravb: Fix potential use-after-free in ravb_rx_gbeth()")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Sending a 7kB ping packet to the RZ/G2L in v6.9-rc2 causes the following
backtrace:
WARNING: CPU: 0 PID: 0 at include/linux/skbuff.h:3127 skb_trim+0x30/0x38
Hardware name: Renesas SMARC EVK based on r9a07g044l2 (DT)
pc : skb_trim+0x30/0x38
lr : ravb_rx_csum_gbeth+0x40/0x90
Call trace:
skb_trim+0x30/0x38
ravb_rx_gbeth+0x56c/0x5cc
ravb_poll+0xa0/0x204
__napi_poll+0x38/0x17c
This is caused by ravb_rx_gbeth() calling ravb_rx_csum_gbeth() with the
wrong skb for a packet which spans multiple descriptors. To fix this,
use the correct skb.
Fixes: c2da940857 ("ravb: Add Rx checksum offload support for GbEth")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The RX loops in ravb_rx_gbeth() and ravb_rx_rcar() skip to the next loop
iteration if a zero-length descriptor is seen (indicating a DMA mapping
error). However, the current RX descriptor index `priv->cur_rx[q]` was
incremented at the end of the loop and so would not be incremented when
we skip to the next loop iteration. This would cause the loop to keep
seeing the same zero-length descriptor instead of moving on to the next
descriptor.
As the loop counter `i` still increments, the loop would eventually
terminate so there is no risk of being stuck here forever - but we
should still fix this to avoid wasting cycles.
To fix this, the RX descriptor index is incremented at the top of the
loop, in the for statement itself. The assignments of `entry` and `desc`
are brought into the loop to avoid the need for duplication.
Fixes: d8b48911fd ("ravb: fix ring memory allocation")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The units of "work done" in the RX path should be packets instead of
descriptors.
Descriptors which are used by the hardware to record error conditions or
are empty in the case of a DMA mapping error should not count towards
our RX work budget.
Also make the limit variable unsigned as it can never be negative.
Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Due to a change in the order of initialization, the lid timer got
started before proper setup was made. This resulted in a crash during
boot.
The lid switch is handled by gma500 through a timer that periodically
polls the opregion for changes. These types of ACPI events shouldn't be
handled by the graphics driver so let's get rid of the lid code. This
fixes the crash during boot.
Reported-by: Enrico Bartky <enrico.bartky@gmail.com>
Fixes: 8f1aaccb04 ("drm/gma500: Implement client-based fbdev emulation")
Tested-by: Enrico Bartky <enrico.bartky@gmail.com>
Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415112731.31841-1-patrik.r.jakobsson@gmail.com
Add a FRED-specific INT80 handler and document why it differs from the
current one. Eventually, the common bits will be unified once FRED hw is
available and it turns out that no further changes are needed but for
now, keep the handlers separate for everyone's sanity's sake.
[ bp: Zap duplicated commit message, massage. ]
Fixes: 55617fb991 ("x86/entry: Do not allow external 0x80 interrupts")
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240417174731.4189592-1-xin@zytor.com
The headset mic requires a fixup to be properly detected/used.
As a reference, this specific model from 2021 reports
the following devices:
https://alsa-project.org/db/?f=1a5ddeb0b151db8fe051407f5bb1c075b7dd3e4a
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: <stable@vger.kernel.org>
Message-ID: <b92a9e49fb504eec8416bcc6882a52de89450102.1713370457.git.mchehab@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Many modern codecs support rates up to 768kHz (including DSD1024). Add
support for rates up to 768kHz to the loopback driver.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240416121726.628679-4-pavel.hofman@ivitera.com>
Many modern codecs support 705.6kHz and 768kHz sample rates. Current HW
params fail to set 705.6kHz and 768kHz sample rates as these are not in the
known-rates list.
Add these new rates to the known-rates list to allow them.
Also add defines in pcm.h so that drivers can use it.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240416121726.628679-3-pavel.hofman@ivitera.com>
The snd-aloop loopback driver does not modify or access the actual samples
in any way, defines no volume or mute controls, it's strictly bitperfect.
Therefore DSD formats can be supported without any modification.
Add all DSD formats to the list of supported formats.
Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240416121726.628679-2-pavel.hofman@ivitera.com>
Added the correct pin table for Asus GU605M and GA403U, enabling all
speakers to be controlled with the master.
Updated quirks for GU605M and GA403U by including the pin table patch
in the chain.
Co-developed-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Vitalii Torshyn <vitaly.torshyn@gmail.com>
Message-ID: <20240411125803.18539-1-vitaly.torshyn@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>