Commit graph

1,308,922 commits

Author SHA1 Message Date
Krzysztof Kozlowski
75589d6b11 pinctrl: loongson2: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-3-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Krzysztof Kozlowski
d42005c03a pinctrl: mediatek: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240411064614.7409-2-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Krzysztof Kozlowski
a310822fe7 pinctrl: freescale: imx8ulp: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.  Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-1-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-17 10:43:50 +02:00
Luca Coelho
700c340195 drm/i915/display: tie DMC wakelock to DC5/6 state transitions
We only need DMC wakelocks when we allow DC5 and DC6 states.  Add the
calls to enable and disable DMC wakelock accordingly.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-5-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:23 +03:00
Luca Coelho
8a8dcb23b6 drm/i915/display: add module parameter to enable DMC wakelock
This feature should be disabled by default until properly tested and
mature.  Add a module parameter to enable the feature for testing,
while keeping it disabled by default for now.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-4-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:20 +03:00
Luca Coelho
fe3b3ed7ff drm/i915/display: don't allow DMC wakelock on older hardware
Only allow running DMC wakelock code if the display version is 20 or
greater.  Also check if DMC is loaded before enabling.

Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-3-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:13 +03:00
Luca Coelho
765425f598 drm/i915/display: add support for DMC wakelocks
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.

Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.

The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.

BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2024-04-17 11:41:08 +03:00
Zhang Rui
72b8b94155 powercap: intel_rapl: Sort header files
Sort header files alphabetically.

Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-17 10:32:11 +02:00
David S. Miller
cb178ccb4a Merge branch 'mt7530-fixes'
Merge branch 'mr7530-fixes'

Arınç ÜNAL says:

====================
Fix port mirroring on MT7530 DSA subdriver

This patch series fixes the frames received on the local port (monitor
port) not being mirrored, and port mirroring for the MT7988 SoC switch.
====================

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
2024-04-17 08:56:51 +01:00
Arınç ÜNAL
2c606d1385 net: dsa: mt7530: fix port mirroring for MT7988 SoC switch
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.

Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.

Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-17 08:56:36 +01:00
Arınç ÜNAL
d59cf049c8 net: dsa: mt7530: fix mirroring frames received on local port
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.

This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.

Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:

  tc qdisc add dev swp0 clsact

  tc filter add dev swp0 ingress matchall skip_sw \
  action mirred egress mirror dev swp0

As a side note, this configuration provides the hairpinning feature for a
single port.

Fixes: 37feab6076 ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-17 08:56:36 +01:00
Chuanhong Guo
fb1f4584b1 USB: serial: option: add support for Fibocom FM650/FG650
Fibocom FM650/FG650 are 5G modems with ECM/NCM/RNDIS/MBIM modes.
This patch adds support to all 4 modes.

In all 4 modes, the first serial port is the AT console while the other
3 appear to be diagnostic interfaces for dumping modem logs.

usb-devices output for all modes:

ECM:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  5 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a04 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

NCM:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a05 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm
E:  Ad=82(I) Atr=03(Int.) MxPS=  16 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

RNDIS:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  4 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a06 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

MBIM:
T:  Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=5000 MxCh= 0
D:  Ver= 3.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs=  1
P:  Vendor=2cb7 ProdID=0a07 Rev=04.04
S:  Manufacturer=Fibocom Wireless Inc.
S:  Product=FG650 Module
S:  SerialNumber=0123456789ABCDEF
C:  #Ifs= 6 Cfg#= 1 Atr=c0 MxPwr=504mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E:  Ad=82(I) Atr=03(Int.) MxPS=  64 Ivl=32ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E:  Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=83(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=03(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=84(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=04(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=85(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I:  If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E:  Ad=05(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E:  Ad=86(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2024-04-17 09:34:41 +02:00
Miri Korenblit
bada85a3f5 wifi: iwlwifi: mvm: return uid from iwl_mvm_build_scan_cmd
This function is supposed to return a uid on success, and an errno in
failure.
But it currently returns the return value of the specific cmd version
handler, which in turn returns 0 on success and errno otherwise.
This means that on success, iwl_mvm_build_scan_cmd will return 0
regardless if the actual uid.
Fix this by returning the uid if the handler succeeded.

Fixes: 687db6ff5b ("iwlwifi: scan: make new scan req versioning flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240415114847.5e2d602b3190.I4c4931021be74a67a869384c8f8ee7463e0c7857@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-17 09:28:28 +02:00
Avraham Stern
dbfff5bf92 wifi: iwlwifi: mvm: remove old PASN station when adding a new one
If a PASN station is added, and an old PASN station already exists
for the same mac address, remove the old station before adding the
new one. Keeping the old station caueses old security context to
be used in measurements.

Fixes: 0739a7d70e ("iwlwifi: mvm: initiator: add option for adding a PASN responder")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.ef3544a416f2.I4e8c7c8ca22737f4f908ae5cd4fc0b920c703dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-17 09:28:11 +02:00
Felix Fietkau
8c75cdcdf8 wifi: mac80211: split mesh fast tx cache into local/proxied/forwarded
Depending on the origin of the packets (and their SA), 802.11 + mesh headers
could be filled in differently. In order to properly deal with that, add a
new field to the lookup key, indicating the type (local, proxied or
forwarded). This can fix spurious packet drop issues that depend on the order
in which nodes/hosts communicate with each other.

Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240415121811.13391-1-nbd@nbd.name
[use sizeof_field() for key_len]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-04-17 09:21:32 +02:00
Dave Airlie
34633158b8 amd-drm-next-6.10-2024-04-13:
amdgpu:
 - HDCP fixes
 - ODM fixes
 - RAS fixes
 - Devcoredump improvements
 - Misc code cleanups
 - Expose VCN activity via sysfs
 - SMY 13.0.x updates
 - Enable fast updates on DCN 3.1.4
 - Add dclk and vclk reporting on additional devices
 - Add ACA RAS infrastructure
 - Implement TLB flush fence
 - EEPROM handling fixes
 - SMUIO 14.0.2 support
 - SMU 14.0.1 Updates
 - Sync page table freeing with TLB flushes
 - DML2 refactor
 - DC debug improvements
 - SR-IOV fixes
 - Suspend and Resume fixes
 - DCN 3.5.x Updates
 - Z8 fixes
 - UMSCH fixes
 - GPU reset fixes
 - HDP fix for second GFX pipe on GC 10.x
 - Enable secondary GFX pipe on GC 10.3
 - Refactor and clean up BACO/BOCO/BAMACO handling
 - VCN partitioning fix
 - DC DWB fixes
 - VSC SDP fixes
 - DCN 3.1.6 fix
 - GC 11.5 fixes
 - Remove invalid TTM resource start check
 - DCN 1.0 fixes
 
 amdkfd:
 - MQD handling cleanup
 - Preemption handling fixes for XCDs
 - TLB flush fix for GC 9.4.2
 - Properly clean up workqueue during module unload
 - Fix memory leak process create failure
 - Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace
 
 radeon:
 - Misc code cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQgO5Idg2tXNTSZAr293/aFa7yZ2AUCZhr4EAAKCRC93/aFa7yZ
 2B8jAP9z1JpOnjSQvc2mhHAooXRYO4Mj5HCQ25ZE8N4c8ZZhjAEAqefmEx5/UyLh
 lv2pWILL4o597qhq9nA7hJ6tTICLPAU=
 =HUwY
 -----END PGP SIGNATURE-----

Merge tag 'amd-drm-next-6.10-2024-04-13' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-6.10-2024-04-13:

amdgpu:
- HDCP fixes
- ODM fixes
- RAS fixes
- Devcoredump improvements
- Misc code cleanups
- Expose VCN activity via sysfs
- SMY 13.0.x updates
- Enable fast updates on DCN 3.1.4
- Add dclk and vclk reporting on additional devices
- Add ACA RAS infrastructure
- Implement TLB flush fence
- EEPROM handling fixes
- SMUIO 14.0.2 support
- SMU 14.0.1 Updates
- Sync page table freeing with TLB flushes
- DML2 refactor
- DC debug improvements
- SR-IOV fixes
- Suspend and Resume fixes
- DCN 3.5.x Updates
- Z8 fixes
- UMSCH fixes
- GPU reset fixes
- HDP fix for second GFX pipe on GC 10.x
- Enable secondary GFX pipe on GC 10.3
- Refactor and clean up BACO/BOCO/BAMACO handling
- VCN partitioning fix
- DC DWB fixes
- VSC SDP fixes
- DCN 3.1.6 fix
- GC 11.5 fixes
- Remove invalid TTM resource start check
- DCN 1.0 fixes

amdkfd:
- MQD handling cleanup
- Preemption handling fixes for XCDs
- TLB flush fix for GC 9.4.2
- Properly clean up workqueue during module unload
- Fix memory leak process create failure
- Range check CP bad op exception targets to avoid reporting invalid exceptions to userspace

radeon:
- Misc code cleanups

From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240413213708.3427038-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-04-17 15:48:59 +10:00
Arınç ÜNAL
dd5c56cd06 ARM: dts: BCM5301X: remove earlycon on ASUS RT-AC3100 and ASUS RT-AC88U
Remove the earlycon boot argument. As Krzysztof pointed out, earlycon is
for debugging, not regular mainline usage.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-4-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-16 20:11:03 -07:00
Arınç ÜNAL
a0ad4fe7ef ARM: dts: BCM5301X: remove duplicate compatible on ASUS RT-AC3100 & AC88U
The compatible property on the node with the srab handle is already
described with the same value on the included device tree. Remove it.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-3-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-16 20:10:52 -07:00
Arınç ÜNAL
1acb48eeeb ARM: dts: BCM5301X: provide address for SoC MACs on ASUS RT-AC3100 & AC88U
Do not leave the providing of a MAC address for an SoC MAC to a driver.
Describe it on the bindings. Provide a distinct MAC address for each SoC
MAC.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-2-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-16 20:09:31 -07:00
Arınç ÜNAL
94e181a570 ARM: dts: BCM5301X: use color and function on ASUS RT-AC3100 and RT-AC88U
As the label property for LEDs is deprecated, use the color and function
properties to describe the LEDs on the device tree file for ASUS RT-AC3100
and ASUS RT-AC88U. Reorder the LED and button nodes in alphabetical order.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-1-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2024-04-16 20:09:18 -07:00
Alex Deucher
efade6fe50 drm/radeon: silence UBSAN warning (v3)
Convert a variable sized array from [1] to [].

v2: fix up a few more.
v3: integrate comments from Kees.

Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2)
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: keescook@chromium.org
2024-04-16 22:39:16 -04:00
Alex Deucher
69c0f07053 drm/radeon: make -fstrict-flex-arrays=3 happy
The driver parses a union where the layout up through the first
array is the same, however, the array has different sizes
depending on the elements in the union.  Be explicit to
fix the UBSAN checker.

Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kees Cook <keescook@chromium.org>
2024-04-16 22:39:16 -04:00
Kenneth Feng
0c1195ca0d drm/amd/swsmu: support smu block discovery for smu v14
Support for smu ip block add for SMU v14.

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Likun Gao
6627d845ac drm/amd/swsmu: support SMU_14_0_2 ppt_funcs
Add smu v14_0_2 ppt fucs support.

v2: squash in updates (Alex)

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Likun Gao
3e55845c39 drm/amd/swsmu: add smu v14_0_2 support
Add initial support for smu v14_0_2.

v2: fix warnings (Alex)
v3: squash in various fixes (Alex)
v4: squash in various fixes (Alex)
v5: remove hardcoded pptable id (Alex)
v6: update fw version (Alex)
v7: squash in more updates (Alex)
v8: rebase, squash in pptable override updates,
    combo table updates, SW CTF support (Alex)

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Likun Gao
fefa83fe43 drm/amd/swsmu: add pptable header for smu v14_0_2
Add pptable header for smu v14_0_2.

Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Kenneth Feng
457ff2952b drm/amd/swsmu: add smu v14_0_2 ppsmc file
Add initial smu v14_0_2 ppsmc file

v2: Squash in updates (Alex)
v3: Squash in updates (Alex)

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Kenneth Feng
1dde20aa39 drm/amd/swsmu: add smu14 driver if file
Add initial smu14 driver if file

v2: squash in updates (Alex)
v3: squash in updates (Alex)
v4: squash in updates (Alex)

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Kenneth Feng
fa62c03917 drm/amd/swsmu: add smu14 ip support
Add initial swSMU support for smu 14 series ASIC.

v2: rebase (Alex)

Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Hawking Zhang
577cbed318 drm/amdgpu: rename DBG_DRV to HAD_DRV for psp v14
Add a psp bl command enum for HAD_DRV.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Ma Jun
1347853271 drm/amdgpu: refactoring the runtime pm mode detection code
refactor the code of runtime pm mode detection to support
amdgpu_runtime_pm =2 and 1 two cases

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Hawking Zhang
6c6acc5f33 drm/amdgpu: Load ipkeymgr drv for psp v14
while DBG_DRV is renamed to HAD_DRV for psp v14,
part of its APIs/functionality is moved to a new
component named Ipkeymgr_Drv.

Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:16 -04:00
Thorsten Blum
12b8b4e685 drm/amdgpu: Add missing space to DRM_WARN() message
s/,please/, please/

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Rodrigo Siqueira
d9fbd64e8e Revert "drm/amd/display: Enable cur_rom_en even if cursor degamma is not enabled"
This reverts commit 002001b092.

The original patch introduces cursor gamma issue to multiple
Linux compositors. For this reason this commit reverts this change.

Cc: Melissa Wen <mwen@igalia.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Ma Jun
959056982a drm/amdgpu: Fix discovery initialization failure during pci rescan
Waiting for system ready to fix the discovery initialization
failure issue. This failure usually occurs when dGPU is removed
and then rescanned via command line.
It's caused by following two errors:
[1] vram size is 0
[2] wrong binary signature

Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Christian König
394ae0603a drm/amdgpu: fix visible VRAM handling during faults
When we removed the hacky start code check we actually didn't took into
account that *all* VRAM pages needs to be CPU accessible.

Clean up the code and unify the handling into a single helper which
checks if the whole resource is CPU accessible.

The only place where a partial check would make sense is during
eviction, but that is neglitible.

Signed-off-by: Christian König <christian.koenig@amd.com>
Fixes: aed01a6804 ("drm/amdgpu: Remove TTM resource->start visible VRAM condition v2")
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
2024-04-16 22:39:15 -04:00
xinhui pan
98856136c4 drm/amdgpu: validate the parameters of bo mapping operations more clearly
Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place.

Fixes: dc54d3d174 ("drm/amdgpu: implement AMDGPU_VA_OP_CLEAR v2")
Cc: stable@vger.kernel.org
Reported-by: Vlad Stolyarov <hexed@google.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: xinhui pan <xinhui.pan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Yang Wang
f23558627f drm/amdgpu: add new aca smu callback func parse_error_code()
add new aca smu callback parse_error_code{} to avoid specific asic check
in amdgpu_aca.c file

Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Aric Cyr
8684204672 drm/amd/display: 3.2.281
This version brings along following fixes:

* Expand dmub_cmd operations.
* Update DVI configuration.
* Modify power sequence.
* Enable Z10 flag for IPS.
* Multiple code cleanups.

Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Rodrigo Siqueira
d4a5b420cc drm/amd/display: Add missing replay field
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Rodrigo Siqueira
251d7ff311 drm/amd/display: Add missing callback for init_watermarks in DCN 301
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Rodrigo Siqueira
e1f7aa2d54 drm/amd/display: Update DCN201 link encoder registers
Add some missing registers expansion in the dcn201_link_encoder file.

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Rodrigo Siqueira
460f6e3950 drm/amd/display: Move REG sequence from program ogam to idle before connect
Fill ring buffer before offload.

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Rodrigo Siqueira
35be2cbc92 drm/amd/display: Rework dcn10_stream_encoder header
This commit remove some unused code and also rename one of the define.

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Eric Bernstein
68c14b31ca drm/amd/display: Update FMT settings for 4:2:0
[Why] Update FMT_CONTROL settings based on HW spec
[How] Update FMT settings for 4:2:0

Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:39:15 -04:00
Jonathan Kim
f7c161a4c2 drm/amdgpu: increase mes submission timeout
MES internally has a timeout allowance of 2 seconds.
Increase driver timeout to 3 seconds to be safe.

Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2024-04-16 22:38:59 -04:00
Kory Maincent (Dent Project)
b010bf72da net: pse-pd: Rectify and adapt the naming of admin_cotrol member of struct pse_control_config
In commit 18ff0bcda6 ("ethtool: add interface to interact with Ethernet
Power Equipment"), the 'pse_control_config' structure was introduced,
housing a single member labeled 'admin_cotrol' responsible for maintaining
the operational state of the PoDL PSE functions.

A noticeable typographical error exists in the naming of this field
('cotrol' should be corrected to 'control'), which this commit aims to
rectify.

Furthermore, with upcoming extensions of this structure to encompass PoE
functionalities, the field is being renamed to 'podl_admin_state' to
distinctly indicate that this state is tailored specifically for PoDL."

Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-3-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-16 19:17:17 -07:00
Kory Maincent (Dent Project)
93c0d8c0ac of: property: Add fw_devlink support for pse parent
This allows fw_devlink to create device links between consumers of
a PSE and the supplier of the PSE.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-2-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-16 19:17:16 -07:00
Kory Maincent (Dent Project)
57f73805b9 MAINTAINERS: net: Add Oleksij to pse-pd maintainers
Oleksij was the first to add support for pse-pd net subsystem.
Add himself to the maintainers seems logical.

Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-1-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-16 19:17:16 -07:00
Jakub Kicinski
438ce84bae selftests: drv-net: add config for netdevsim
Real driver testing will obviously require enabling more
options, but will require more manual setup in the first
place. For CIs running purely software tests we need
to enable netdevsim.

Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240416004556.1618804-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-16 18:54:06 -07:00