Moving req_bio_endio() code into its only caller, blk_update_request(),
allows reducing accesses to and tests of bio and request fields. Also,
given that partial completions of zone append operations is not
possible and that zone append operations cannot be merged, the update
of the BIO sector using the request sector for these operations can be
moved directly before the call to bio_endio().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On completion of a flush sequence, blk_flush_restore_request() restores
the bio of a request to the original submitted BIO. However, the last
use of the request in the flush sequence may have been for a POSTFLUSH
which does not have a sector. So make sure to restore the request sector
using the iter sector of the original BIO. This BIO has not changed yet
since the completions of the flush sequence intermediate steps use
requeueing of the request until all steps are completed.
Restoring the request sector ensures that blk_mq_end_request() will see
a valid sector as originally set when the flush BIO was submitted.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The newly added driver causes a warning about missing dependencies
by selecting CONFIG_TYPEC unconditionally:
WARNING: unmet direct dependencies detected for TYPEC
Depends on [n]: USB_SUPPORT [=n]
Selected by [y]:
- PHY_ROCKCHIP_USBDP [=y] && ARCH_ROCKCHIP [=y] && OF [=y]
WARNING: unmet direct dependencies detected for USB_COMMON
Depends on [n]: USB_SUPPORT [=n]
Selected by [y]:
- EXTCON_RTK_TYPE_C [=y] && EXTCON [=y] && (ARCH_REALTEK [=y] || COMPILE_TEST [=y]) && TYPEC [=y]
Since that is a user-visible option, it should not really be selected
in the first place. Replace the 'select' with a 'depends on' as
we have for similar drivers.
Fixes: 2f70bbddeb ("phy: rockchip: add usbdp combo phy driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240415174241.77982-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ret variable may not be initialized in rk_udphy_usb3_phy_init(), if
the PHY is not using USB3 mode.
Since the DisplayPort part is handled separately and the PHY does not
support USB2 (which is routed to another PHY on Rockchip RK3588), the
right exit code for this case is 0. Thus let's initialize the variable
accordingly.
Fixes: 2f70bbddeb ("phy: rockchip: add usbdp combo phy driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404141048.qFAYDctQ-lkp@intel.com/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240416145233.94687-1-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
next_work is only used to make the work visible for
cancellation. Instead, we can just directly write to cur_work before
dropping the acct_lock and avoid the extra hop.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 361aee450c ("io-wq: add intermediate work step between pending
list and active work") closed a race between a cancellation and the work
being removed from the wq for execution. To ensure the request is
always reachable by the cancellation, we need to move it within the wq
lock, which also synchronizes the cancellation. But commit
42abc95f05 ("io-wq: decouple work_list protection from the big
wqe->lock") replaced the wq lock here and accidentally reintroduced the
race by releasing the acct_lock too early.
In other words:
worker | cancellation
work = io_get_next_work() |
raw_spin_unlock(&acct->lock); |
|
| io_acct_cancel_pending_work
| io_wq_worker_cancel()
worker->next_work = work
Using acct_lock is still enough since we synchronize on it on
io_acct_cancel_pending_work.
Fixes: 42abc95f05 ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For some reason the snps/cx0 PLL states were added into
a union alongside dpll_hw_state. Just suck them into
dpll_hw_state so that we don't have so many levels of
unions/etc.
TODO: Get rid of 'clock' from the snps/cx0 PLL states
as it is not a register values and thus doesn't
belong there
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
intel_dpll_hw_state contains space for all possible PLL
register values across all platforms. That is rather wasteful
as each machine only needs to store the registers values
that are appropriate for the platform.
Turn intel_dpll_hw_state into a union so that we don't
waste memory for the register values of other platforms.
And let's use an anonymous union so that we don't have
to do tons of s/struct/union/ all over the place.
pahole:
struct intel_dpll_hw_state {
- struct i9xx_dpll_hw_state i9xx; /* 0 16 */
- struct hsw_dpll_hw_state hsw; /* 16 8 */
- struct skl_dpll_hw_state skl; /* 24 12 */
- struct bxt_dpll_hw_state bxt; /* 36 44 */
- /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
- struct icl_dpll_hw_state icl; /* 80 60 */
+ union {
+ struct i9xx_dpll_hw_state i9xx; /* 0 16 */
+ struct hsw_dpll_hw_state hsw; /* 0 8 */
+ struct skl_dpll_hw_state skl; /* 0 12 */
+ struct bxt_dpll_hw_state bxt; /* 0 44 */
+ struct icl_dpll_hw_state icl; /* 0 60 */
+ }; /* 0 60 */
- /* size: 140, cachelines: 3, members: 5 */
- /* last cacheline: 12 bytes */
+ /* size: 60, cachelines: 1, members: 1 */
+ /* last cacheline: 60 bytes */
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
struct intel_dpll_hw_state has a spot for all possible
PLL registers across all platforms (well, apart from
cx0/snps). This makes it rather confusing when trying to
figure out which members belong to which platform(s).
Split the struct up into five different platform specific
sub-structures. For now this will actually increase the size
a little bit as we have to duplicate a few members from
skl to icl, but that will be remedied soon when we turn
the thing into a union.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use devm_add_action_or_reset() rather than manually cleaning up on the
error path.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240417093026.79396-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch which fixed the missing remove_late() calls missed a case
when sof_select_ipc_and_paths() could return with error and in this
case sof_init_environment() would just return with 0.
Do not ignore the error code returned by sof_select_ipc_and_paths().
Fixes: 90f8917e7a ("ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240417075804.10829-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The *_compute_dpll() functions generally contain
two things:
- huge pile of inline code to calculate the DPLL
register value
- a few calls to helpers to calculate the
DPLL_MD and FP register values
Pull the DPLL register value calculations into a helpers
as well, so that *_compute_dpll() can focus on higher
level tasks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stop rummaging around inside pll->state directly in the low
level pll->enable() functions, and instead let the higher level
code figure out where the correct state is stored and pass it in.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Spinkle local PLL hw_state variables into various low
level PLL functions. Will make subsequent changes cleaner
when we don't have to touch so many places when renaming
struct members and whatnot.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We have zero consistency in out PLL state naming scheme. Try
to unify things a bit by using 'dpll_hw_state' for high level
stuff and just 'hw_state' for low level stuff. Currently both
are the same, but I want to unionize intel_dpll_hw_state at
which point using different names can make it more clear whether
we're talking about the whole union or just the embedded platform
specific struct.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When dumping a character array, libbpf will watch for a '\0' and set
is_array_terminated=true if found. This prevents libbpf from printing
the remaining characters of the array, treating it as a nul-terminated
string.
However, once this flag is set, it's never reset, leading to subsequent
characters array not being printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
],
This patch saves the is_array_terminated flag and restores its
default (false) value before looping over the elements of an array,
then restores it afterward. This way, libbpf's behavior is unchanged
when dumping the characters of an array, but subsequent arrays are
printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
[
'l',
'o',
],
],
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-3-qde@naccy.de
In btf_dump_array_data(), libbpf will call btf_dump_dump_type_data() for
each element. For an array of characters, each element will be
processed the following way:
- btf_dump_dump_type_data() is called to print the character
- btf_dump_data_pfx() prefixes the current line with the proper number
of indentations
- btf_dump_int_data() is called to print the character
- After the last character is printed, btf_dump_dump_type_data() calls
btf_dump_data_pfx() before writing the closing bracket
However, for an array containing characters, btf_dump_int_data() won't
print any '\0' and subsequent characters. This leads to situations where
the line prefix is written, no character is added, then the prefix is
written again before adding the closing bracket:
(struct sk_metadata){
.str_array = (__u8[14])[
'H',
'e',
'l',
'l',
'o',
],
This change solves this issue by printing the '\0' character, which
has two benefits:
- The bracket closing the array is properly aligned
- It's clear from a user point of view that libbpf uses '\0' as a
terminator for arrays of characters.
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-2-qde@naccy.de
Protect against use after free when filesystem calls fsnotify_sb_error()
during fs shutdown.
Move freeing of sb->s_fsnotify_info to destroy_super_work(), because it
may be accessed from fs shutdown context.
Reported-by: syzbot+5e3f9b2a67b45f16d4e6@syzkaller.appspotmail.com
Suggested-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/linux-fsdevel/20240416173211.4lnmgctyo4jn5fha@quack3/
Fixes: 07a3b8d0bf ("fsnotify: lazy attach fsnotify_sb_info state to sb")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240416181452.567070-1-amir73il@gmail.com>
The asid is only erased from the xarray when the vm refcount reaches
zero, however this leads to potential UAF since the xe_vm_get() only
works on a vm with refcount != 0. Since the asid is allocated in the vm
create ioctl, rather erase it when closing the vm, prior to dropping the
potential last ref. This should also work when user closes driver fd
without explicit vm destroy.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com
(cherry picked from commit 83967c5732)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Add a unreference bo in the error path, to prevent leaking a bo ref.
Return 0 on success to clarify the success path.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404090302.68422-1-maarten.lankhorst@linux.intel.com
(cherry picked from commit a2f3d731be)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Now that we no longer grab the usm.lock mutex (which might sleep) it
looks like it should be safe to directly perform xe_vm_free when vm
refcount reaches zero, instead of punting that off to some worker.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-5-matthew.auld@intel.com
The asid is only erased from the xarray when the vm refcount reaches
zero, however this leads to potential UAF since the xe_vm_get() only
works on a vm with refcount != 0. Since the asid is allocated in the vm
create ioctl, rather erase it when closing the vm, prior to dropping the
potential last ref. This should also work when user closes driver fd
without explicit vm destroy.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/1594
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412113144.259426-4-matthew.auld@intel.com
We have observed underruns on some platforms if the CFB offset is within
the first page of stolen. Just like i915 skip the first page.
v2 (Maarten)
- Also align the start.
BSpec: 50214
Reported-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412150301.273344-4-matthew.auld@intel.com
No need to be so aggressive here. The upper layers will already apply
the needed alignment, plus some allocations might wish to skip it. Main
issue is that we might want to have start/end bias range which doesn't
match the default alignment which is rejected by the allocator.
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412150301.273344-3-matthew.auld@intel.com
atomic_open is an optional VFS operation, and is primarily for network
filesystems. NFS (for instance) can just send an open call for the last
path component rather than doing a lookup and then having to follow that
up with an open when it doesn't have a dentry in cache.
ntfs3 is a local filesystem however, and its atomic_open just does a
typical lookup + open, but in a convoluted way. atomic_open will also
make directory leases more difficult to implement on the filesystem.
Remove ntfs_atomic_open.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Andrew Oates reported that some macOS hosts could repeatedly
send FIN packets even if the remote peer drops them and
send back DUP ACK RWIN 0 packets.
<quoting Andrew>
20:27:16.968254 gif0 In IP macos > victim: Flags [SEW], seq 1950399762, win 65535, options [mss 1460,nop,wscale 6,nop,nop,TS val 501897188 ecr 0,sackOK,eol], length 0
20:27:16.968339 gif0 Out IP victim > macos: Flags [S.E], seq 2995489058, ack 1950399763, win 1448, options [mss 1460,sackOK,TS val 3829877593 ecr 501897188,nop,wscale 0], length 0
20:27:16.968833 gif0 In IP macos > victim: Flags [.], ack 1, win 2058, options [nop,nop,TS val 501897188 ecr 3829877593], length 0
20:27:16.968885 gif0 In IP macos > victim: Flags [P.], seq 1:1449, ack 1, win 2058, options [nop,nop,TS val 501897188 ecr 3829877593], length 1448
20:27:16.968896 gif0 Out IP victim > macos: Flags [.], ack 1449, win 0, options [nop,nop,TS val 3829877593 ecr 501897188], length 0
20:27:19.454593 gif0 In IP macos > victim: Flags [F.], seq 1449, ack 1, win 2058, options [nop,nop,TS val 501899674 ecr 3829877593], length 0
20:27:19.454675 gif0 Out IP victim > macos: Flags [.], ack 1449, win 0, options [nop,nop,TS val 3829880079 ecr 501899674], length 0
20:27:19.455116 gif0 In IP macos > victim: Flags [F.], seq 1449, ack 1, win 2058, options [nop,nop,TS val 501899674 ecr 3829880079], length 0
The retransmits/dup-ACKs then repeat in a tight loop.
</quoting Andrew>
RFC 9293 3.4. Sequence Numbers states :
Note that when the receive window is zero no segments should be
acceptable except ACK segments. Thus, it is be possible for a TCP to
maintain a zero receive window while transmitting data and receiving
ACKs. However, even when the receive window is zero, a TCP must
process the RST and URG fields of all incoming segments.
Even if we could consider a bare FIN.ACK packet to be an ACK in RFC terms,
the retransmits should use exponential backoff.
Accepting the FIN in linux does not add extra memory costs,
because the FIN flag will simply be merged to the tail skb in
the receive queue, and incoming packet is freed.
Reported-by: Andrew Oates <aoates@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Cc: Christoph Paasch <cpaasch@apple.com>
Cc: Vidhi Goel <vidhi_goel@apple.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since [1], dma_alloc_coherent() does not accept requests for GFP_COMP
anymore, even on archs that may be able to fulfill this. Functionality that
relied on the receive buffer being a compound page broke at that point:
The SMC-D protocol, that utilizes the ism device driver, passes receive
buffers to the splice processor in a struct splice_pipe_desc with a
single entry list of struct pages. As the buffer is no longer a compound
page, the splice processor now rejects requests to handle more than a
page worth of data.
Replace dma_alloc_coherent() and allocate a buffer with folio_alloc and
create a DMA map for it with dma_map_page(). Since only receive buffers
on ISM devices use DMA, qualify the mapping as FROM_DEVICE.
Since ISM devices are available on arch s390, only, and on that arch all
DMA is coherent, there is no need to introduce and export some kind of
dma_sync_to_cpu() method to be called by the SMC-D protocol layer.
Analogously, replace dma_free_coherent by a two step dma_unmap_page,
then folio_put to free the receive buffer.
[1] https://lore.kernel.org/all/20221113163535.884299-1-hch@lst.de/
Fixes: c08004eede ("s390/ism: don't pass bogus GFP_ flags to dma_alloc_coherent")
Signed-off-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>