Introduce a new ioctl to handle exchanging ranges of bytes
between files. The goal here is to perform the exchange atomically with
respect to applications -- either they see the file contents before the
exchange or they see that A-B is now B-A, even if the kernel crashes.
My original goal with all this code was to make it so that online repair
can build a replacement directory or xattr structure in a temporary file
and commit the repair by atomically exchanging all the data blocks
between the two files. However, I needed a way to test this mechanism
thoroughly, so I've been evolving an ioctl interface since then.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Export these functions so that the next patch can use them to check the
file ranges being passed to the XFS_IOC_EXCHANGE_RANGE operation.
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This predicate doesn't modify the structure that's being passed in, so
we can mark it const.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a helper function that can compute if a 64-bit number is an
integer multiple of a 32-bit number, where the 32-bit number is not
required to be an even power of two. This is needed for some new code
for the realtime device, where we can set 37k allocation units and then
have to remap them.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Replace the open-coded logic to decide if a file has a multi-fsb
allocation unit to a helper to make the code easier to read.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Create a new helper function to calculate the fundamental allocation
unit (i.e. the smallest unit of space we can allocate) of a file.
Things are going to get hairy with range-exchange on the realtime
device, so prepare for this now.
Remove the static attribute from xfs_is_falloc_aligned since the next
patch will need it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Move the two public symbols in xfs_file.c to xfs_file.h. We're about to
add more public symbols in that source file, so let's finally create the
header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Similarly, move declarations of public symbols of xfs_iops.c from
xfs_inode.h to xfs_iops.h.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The lease breaking functions operate at the scope of the entire VFS
inode, not subranges of a file. Move them to xfs_inode.c since they're
already declared in xfs_inode.h. This cleanup moves us closer to
having xfs_FOO.h declare only the symbols in xfs_FOO.c.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While reviewing the online fsck patchset, someone spied the
xfs_swapext_can_use_without_log_assistance function and wondered why we
go through this inverted-bitmask dance to avoid setting the
XFS_SB_FEAT_INCOMPAT_LOG_SWAPEXT feature.
(The same principles apply to the logged extended attribute update
feature bit in the since-merged LARP series.)
The reason for this dance is that xfs_add_incompat_log_feature is an
expensive operation -- it forces the log, pushes the AIL, and then if
nobody's beaten us to it, sets the feature bit and issues a synchronous
write of the primary superblock. That could be a one-time cost
amortized over the life of the filesystem, but the log quiesce and cover
operations call xfs_clear_incompat_log_features to remove feature bits
opportunistically. On a moderately loaded filesystem this leads to us
cycling those bits on and off over and over, which hurts performance.
Why do we clear the log incompat bits? Back in ~2020 I think Dave and I
had a conversation on IRC[2] about what the log incompat bits represent.
IIRC in that conversation we decided that the log incompat bits protect
unrecovered log items so that old kernels won't try to recover them and
barf. Since a clean log has no protected log items, we could clear the
bits at cover/quiesce time.
As Dave Chinner pointed out in the thread, clearing log incompat bits at
unmount time has positive effects for golden root disk image generator
setups, since the generator could be running a newer kernel than what
gets written to the golden image -- if there are log incompat fields set
in the golden image that was generated by a newer kernel/OS image
builder then the provisioning host cannot mount the filesystem even
though the log is clean and recovery is unnecessary to mount the
filesystem.
Given that it's expensive to set log incompat bits, we really only want
to do that once per bit per mount. Therefore, I propose that we only
clear log incompat bits as part of writing a clean unmount record. Do
this by adding an operational state flag to the xfs mount that guards
whether or not the feature bit clearing can actually take place.
This eliminates the l_incompat_users rwsem that we use to protect a log
cleaning operation from clearing a feature bit that a frontend thread is
trying to set -- this lock adds another way to fail w.r.t. locking. For
the swapext series, I shard that into multiple locks just to work around
the lockdep complaints, and that's fugly.
Link: https://lore.kernel.org/linux-xfs/20240131230043.GA6180@frogsfrogsfrogs/
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Dan Carpenter reports:
"Commit 4bdfd7d157 ("xfs: repair free space btrees") from Dec 15,
2023 (linux-next), leads to the following Smatch static checker
warning:
fs/xfs/scrub/alloc_repair.c:781 xrep_abt_build_new_trees()
warn: missing unwind goto?"
That's a bug, so let's fix it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 4bdfd7d157 ("xfs: repair free space btrees")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
xfs/399 found the following deadlock when fuzzing core.mode = ones:
/proc/20506/task/20558/stack :
[<0>] xfs_ilock+0xa0/0x240 [xfs]
[<0>] xfs_ilock_data_map_shared+0x1b/0x20 [xfs]
[<0>] xrep_dinode_findmode_walk_directory+0x69/0xe0 [xfs]
[<0>] xrep_dinode_find_mode+0x103/0x2a0 [xfs]
[<0>] xrep_dinode_mode+0x7c/0x120 [xfs]
[<0>] xrep_dinode_core+0xed/0x2b0 [xfs]
[<0>] xrep_dinode_problems+0x10/0x80 [xfs]
[<0>] xrep_inode+0x6c/0xc0 [xfs]
[<0>] xrep_attempt+0x64/0x1d0 [xfs]
[<0>] xfs_scrub_metadata+0x365/0x840 [xfs]
[<0>] xfs_scrubv_metadata+0x282/0x430 [xfs]
[<0>] xfs_ioc_scrubv_metadata+0x149/0x1a0 [xfs]
[<0>] xfs_file_ioctl+0xc68/0x1780 [xfs]
/proc/20506/task/20559/stack :
[<0>] xfs_buf_lock+0x3b/0x110 [xfs]
[<0>] xfs_buf_find_lock+0x66/0x1c0 [xfs]
[<0>] xfs_buf_get_map+0x208/0xc00 [xfs]
[<0>] xfs_buf_read_map+0x5d/0x2c0 [xfs]
[<0>] xfs_trans_read_buf_map+0x1b0/0x4c0 [xfs]
[<0>] xfs_read_agi+0xbd/0x190 [xfs]
[<0>] xfs_ialloc_read_agi+0x47/0x160 [xfs]
[<0>] xfs_imap_lookup+0x69/0x1f0 [xfs]
[<0>] xfs_imap+0x1fc/0x3d0 [xfs]
[<0>] xfs_iget+0x357/0xd50 [xfs]
[<0>] xchk_dir_actor+0x16e/0x330 [xfs]
[<0>] xchk_dir_walk_block+0x164/0x1e0 [xfs]
[<0>] xchk_dir_walk+0x13a/0x190 [xfs]
[<0>] xchk_directory+0x1a2/0x2b0 [xfs]
[<0>] xfs_scrub_metadata+0x2f4/0x840 [xfs]
[<0>] xfs_scrubv_metadata+0x282/0x430 [xfs]
[<0>] xfs_ioc_scrubv_metadata+0x149/0x1a0 [xfs]
[<0>] xfs_file_ioctl+0xc68/0x1780 [xfs]
Thread 20558 holds an AGI buffer and is trying to grab the ILOCK of the
root directory. Thread 20559 holds the root directory ILOCK and is
trying to grab the AGI of an inode that is one of the root directory's
children. The AGI held by 20558 is the same buffer that 20559 is trying
to acquire. In other words, this is an ABBA deadlock.
In general, the lock order is ILOCK and then AGI -- rename does this
while preparing for an operation involving whiteouts or renaming files
out of existence; and unlink does this when moving an inode to the
unlinked list. The only place where we do it in the opposite order is
on the child during an icreate, but at that point the child is marked
INEW and is not visible to other threads.
Work around this deadlock by replacing the blocking ilock attempt with a
nonblocking loop that aborts after 30 seconds. Relax for a jiffy after
a failed lock attempt.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While reviewing the next patch which fixes an ABBA deadlock between the
AGI and a directory ILOCK, someone asked a question about why we're
holding the AGI in the first place. The reason for that is to quiesce
the inode structures for that AG while we do a repair.
I then realized that the xrep_dinode_findmode invokes xchk_iscan_iter,
which walks the inobts (and hence the AGIs) to find all the inodes.
This itself is also an ABBA vector, since the damaged inode could be in
AG 5, which we hold while we scan AG 0 for directories. 5 -> 0 is not
allowed.
To address this, modify the iscan to allow trylock of the AGI buffer
using the flags argument to xfs_ialloc_read_agi that the previous patch
added.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Allow callers to pass buffer lookup flags to xfs_read_agi and
xfs_ialloc_read_agi. This will be used in the next patch to fix a
deadlock in the online fsck inode scanner.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 4fc8cb47fc ("drm/display: Move HDMI helpers into display-helper
module") turned the DRM_DW_HDMI dependency of DRM_SUN8I_DW_HDMI into a
depends on which ended up disabling the driver in the defconfig. Make
sure it's still enabled.
Fixes: 4fc8cb47fc ("drm/display: Move HDMI helpers into display-helper module")
Reported-by: Mark Brown <broonie@kernel.org>
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240403-fix-dw-hdmi-kconfig-v1-5-afbc4a835c38@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table. Clocks are considered core
components, so usually they are built-in, however these can be built and
used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240410155420.224157-1-krzk@kernel.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Currently we specify the pins for the I2C0 function as PI6 and PI7, even
though they are actually PI5 and PI6. Linux' pinctrl driver and the H616
user manual confirm this.
Fix the pin names in the pins property. None of the existing DTs in the
tree seems to use I2C0, which explains why this went unnoticed.
Fixes: 0d17c86511 ("arm64: dts: allwinner: Add Allwinner H616 .dtsi file")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240329103825.25463-1-andre.przywara@arm.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner A64 manual lists the following constraints for the
PLL-MIPI clock:
- M/N <= 3
- (PLL_VIDEO0)/M >= 24MHz
Use these constraints.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-4-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner A64 manual lists the following constraints for the
PLL-MIPI clock:
- M/N <= 3
- (PLL_VIDEO0)/M >= 24MHz
The PLL-MIPI clock is implemented as ccu_nkm. Therefore, add support for
these constraints.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-3-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
When the Allwinner A64's TCON0 searches the ideal rate for the connected
panel, it may happen that it requests a rate from its parent PLL-MIPI
which PLL-MIPI does not support.
This happens for example on the Olimex TERES-I laptop where TCON0
requests PLL-MIPI to change to a rate of several GHz which causes the
panel to stay blank. It also happens on the pinephone where a rate of
less than 500 MHz is requested which causes instabilities on some
phones.
Set the minimum and maximum rate of Allwinner A64's PLL-MIPI according
to the Allwinner User Manual.
Fixes: ca1170b699 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reported-by: Diego Roversi <diegor@tiscali.it>
Closes: https://groups.google.com/g/linux-sunxi/c/Rh-Uqqa66bw
Tested-by: Diego Roversi <diegor@tiscali.it>
Cc: stable@vger.kernel.org
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-2-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner SoC's typically have an upper and lower limit for their
clocks' rates. Up until now, support for that has been implemented
separately for each clock type.
Implement that functionality in the sunxi-ng's common part making use of
the CCF rate liming capabilities, so that it is available for all clock
types.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Cc: stable@vger.kernel.org
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-1-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The Allwinner A64's GPU has currently three operating points. However,
the BSP runs the GPU fixed at 432 MHz. In addition, at least one of the
devices using that SoC - the pinephone - shows unstabilities (see link)
that can be circumvented by running the GPU at a fixed rate.
Therefore, remove the other two operating points from the GPU OPP table,
so that the GPU runs at a fixed rate of 432 MHz.
Link: https://gitlab.com/postmarketOS/pmaports/-/issues/805
Acked-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Frank Oltmanns <frank@oltmanns.dev>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240310-pinephone-pll-fixes-v4-5-46fc80c83637@oltmanns.dev
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec. All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change. Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317184130.157695-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Delete node via phandle, not via full node path, to avoid easy mistakes
- if original node name changes, such deletion would be ineffective and
not reported by the dtc as error.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317184130.157695-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens. Use also generic name for pwrseq
node, because generic naming is favored by Devicetree spec. All the
clocks affected by this change use clock-output-names, so resulting
clock name should not change. Functional impact checked with comparing
before/after DTBs with dtx_diff and fdtdump.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317184130.157695-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
There is no "reg_gmac_3v3" device node in sun50i-h6-pine-h64.dts,
although there is "gmac-3v3" with "reg_gmac_3v3" label, so let's assume
author wanted to remove that node. Delete node via phandle, not via
full node path, to fix this.
Fixes: f33a911750 ("arm64: dts: allwinner: add pineh64 model B")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317184130.157695-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The red, green, and blue LEDs currently in the device tree represent a
single RGB LED on the front of the PinePhone.
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317004116.1473967-2-aren@peacevolution.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Allows user to set a LED before entering suspend to know that
the phone is still on (or could be used for notifications etc).
Signed-off-by: Miles Alan <m@milesalan.com>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Aren Moynihan <aren@peacevolution.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20240317004116.1473967-1-aren@peacevolution.org
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
While PLL CPUX clock rate change when CPU is running from it works in
vast majority of cases, now and then it causes instability. This leads
to system crashes and other undefined behaviour. After a lot of testing
(30+ hours) while also doing a lot of frequency switches, we can't
observe any instability issues anymore when doing reparenting to stable
clock like 24 MHz oscillator.
Fixes: 524353ea48 ("clk: sunxi-ng: add support for the Allwinner H6 CCU")
Reported-by: Chad Wagner <wagnerch42@gmail.com>
Link: https://forum.libreelec.tv/thread/27295-orange-pi-3-lts-freezes/
Tested-by: Chad Wagner <wagnerch42@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20231013181712.2128037-1-jernej.skrabec@gmail.com
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Generate the mask of enabled L3 banks for the GT. It is stored with the
rest of the GT topology in a consistent representation across platforms.
For now the L3 bank mask is just printed in the log for developers to
easily figure out the fusing characteristics of machines that they are
trying to debug issues on. Later it can be used to replace existing code
in the driver that requires the L3 bank count (not mask). Also the mask
can easily be exposed to user space in a new query if needed.
v2: Better naming of variable and function (Matt Roper)
Bspec: 52545, 52546, 62482
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Francois Dugast <francois.dugast@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410123723.7-2-francois.dugast@intel.com
These have no clear purpose. This is effectively a revert of commit
bb7462b6fd ("vfs: use helpers for calling f_op->{read,write}_iter()").
The patch was created with the help of a coccinelle script.
Fixes: bb7462b6fd ("vfs: use helpers for calling f_op->{read,write}_iter()")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
should've been done as soon as overlayfs stopped messing with fake
paths...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
always equal to ->dentry->d_inode of the path argument these
days.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
IS_ERR(NULL) is false and IS_ERR() already comes with unlikely()...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
kmemleak complains that there's a memory leak related to connect
handling:
unreferenced object 0xffff0001093bdf00 (size 128):
comm "iou-sqp-455", pid 457, jiffies 4294894164
hex dump (first 32 bytes):
02 00 fa ea 7f 00 00 01 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc 2e481b1a):
[<00000000c0a26af4>] kmemleak_alloc+0x30/0x38
[<000000009c30bb45>] kmalloc_trace+0x228/0x358
[<000000009da9d39f>] __audit_sockaddr+0xd0/0x138
[<0000000089a93e34>] move_addr_to_kernel+0x1a0/0x1f8
[<000000000b4e80e6>] io_connect_prep+0x1ec/0x2d4
[<00000000abfbcd99>] io_submit_sqes+0x588/0x1e48
[<00000000e7c25e07>] io_sq_thread+0x8a4/0x10e4
[<00000000d999b491>] ret_from_fork+0x10/0x20
which can can happen if:
1) The command type does something on the prep side that triggers an
audit call.
2) The thread hasn't done any operations before this that triggered
an audit call inside ->issue(), where we have audit_uring_entry()
and audit_uring_exit().
Work around this by issuing a blanket NOP operation before the SQPOLL
does anything.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which will
reduce the overall build time size of the kernel and run time memory
bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove the sentinel from all files under security/ that register a
sysctl table.
Signed-off-by: Joel Granados <j.granados@samsung.com>
Acked-by: Kees Cook <keescook@chromium.org> # loadpin & yama
Tested-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
[PM: subject line tweaks]
Signed-off-by: Paul Moore <paul@paul-moore.com>
I didn't pay close enough attention the last time I tried to fix this
problem - while we currently do correctly take care to make sure we don't
probe a connected eDP port more then once, we don't do the same thing for
eDP ports we found to be disconnected.
So, fix this and make sure we only ever probe eDP ports once and then leave
them at that connector state forever (since without HPD, it's not going to
change on its own anyway). This should get rid of the last few GSP errors
getting spit out during runtime suspend and resume on some machines, as we
tried to reprobe eDP ports in response to ACPI hotplug probe events.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-3-lyude@redhat.com
(cherry picked from commit fe6660b661)
GSP has its own state for keeping track of whether or not a given display
connector is plugged in or not, and enforces this state on the driver. In
particular, AUX transactions on a DisplayPort connector which GSP says is
disconnected can never succeed - and can in some cases even cause
unexpected timeouts, which can trickle up to cause other problems. A good
example of this is runtime power management: where we can actually get
stuck trying to resume the GPU if a userspace application like fwupd tries
accessing a drm_aux_dev for a disconnected port. This was an issue I hit a
few times with my Slimbook Executive 16 - where trying to offload something
to the discrete GPU would wake it up, and then potentially cause it to
timeout as fwupd tried to immediately access the dp_aux_dev nodes for
nouveau.
Likewise: we don't really have any cases I know of where we'd want to
ignore this state and try an aux transaction anyway - and failing pointless
aux transactions immediately can even speed things up. So - let's start
enabling/disabling the aux bus in nouveau_dp_detect() to fix this. We
enable the aux bus during connector probing, and leave it enabled if we
discover something is actually on the connector. Otherwise, we just shut it
off.
This should fix some people's runtime PM issues (like myself), and also get
rid of quite of a lot of GSP error spam in dmesg.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404233736.7946-2-lyude@redhat.com
(cherry picked from commit 9c8a10bf1f)
Add a Python test for the basic ops.
# ./net/nl_netdev.py
KTAP version 1
1..3
ok 1 nl_netdev.empty_check
ok 2 nl_netdev.lo_check
ok 3 nl_netdev.page_pool_check
# Totals: pass:3 fail:0 xfail:0 xpass:0 skip:0 error:0
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using "with" on an entire driver test env is supported already,
but it's also useful to use "with" on an individual nsim.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of a summary line print the full exception.
This makes debugging Python tests much easier.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Developing Python tests is a bit annoying because when test fails
we only print the fail message and no info about which exact check
led to it. Print the location (the first line of this example is new):
# At /root/ksft-net-drv/./net/nl_netdev.py line 38:
# Check failed 0 != 10
not ok 3 nl_netdev.page_pool_check
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20240412141436.828666-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YNL currently reports None for empty dump:
$ cli.py ...netdev.yaml --dump page-pool-get
None
This doesn't matter for the CLI but when writing YNL based tests
having to deal with either list or None is annoying. Limit the
None conversion to non-dump ops:
$ cli.py ...netdev.yaml --dump page-pool-get
[]
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240412141436.828666-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add very basic page pool use so that we can exercise
the netlink uAPI in a selftest.
Page pool gets created on open, destroyed on close.
But we control allocating of a single page thru debugfs.
This page may survive past the page pool itself so that
we can test orphaned page pools.
Link: https://lore.kernel.org/r/20240412141436.828666-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>