Commit graph

1,308,922 commits

Author SHA1 Message Date
Krzysztof Kozlowski
11baa36d31 gpio: lpc32xx: fix module autoloading
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-04-12 21:30:58 +02:00
Andy Shevchenko
3de14369c2 Documentation: gpio: Replace leading TABs by spaces in code blocks
Code blocks are indented with two spaces. If there's a leading TAB, the
syntax highlighting might be broken in some editors. To prevent that,
unify all code blocks by using spaces instead of leading TAB(s).

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[Bartosz: tweaked the commit message]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-04-12 21:27:53 +02:00
Uwe Kleine-König
297f26dbf8 hte: tegra-194: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
2024-04-12 11:02:58 -07:00
Jacob Keller
b80d01ef9a ice: store VF relative MSI-X index in q_vector->vf_reg_idx
The ice physical function driver needs to configure the association of
queues and interrupts on behalf of its virtual functions. This is done over
virtchnl by the VF sending messages during its initialization phase. These
messages contain a vector_id which the VF wants to associate with a given
queue. This ID is relative to the VF space, where 0 indicates the control
IRQ for non-queue interrupts.

When programming the mapping, the PF driver currently passes this vector_id
directly to the low level functions for programming. This works for SR-IOV,
because the hardware uses the VF-based indexing for interrupts.

This won't work for Scalable IOV, which uses PF-based indexing for
programming its VSIs. To handle this, the driver needs to be able to look
up the proper index to use for programming. For typical IRQs, this would be
the q_vector->reg_idx field.

The q_vector->reg_idx can't be set to a VF relative value, because it is
used when the PF needs to control the interrupt, such as when triggering a
software interrupt on stopping the Tx queue. Thus, introduce a new
q_vector->vf_reg_idx which can store the VF relative index for registers
which expect this.

Use this in ice_cfg_interrupt to look up the VF index from the q_vector.
This allows removing the vector ID parameter of ice_cfg_interrupt. Also
notice that this function returns an int, but then is cast to the virtchnl
error enumeration, virtchnl_status_code. Update the return type to indicate
it does not return an integer error code. We can't use normal error codes
here because the return values are passed across the virtchnl interface.

This will allow the future Scalable IOV VFs to correctly look up the index
needed for programming the VF queues without breaking SR-IOV.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12 10:34:29 -07:00
Jacob Keller
c22f7dacb8 ice: set vf->num_msix in ice_initialize_vf_entry()
Commit fe1c5ca2fe ("ice: implement num_msix field per VF") updated the
driver to allow for per-VF MSI-X configuration. The initial defaults were
set in ice_create_vf_entries(). This logic is better placed in
ice_initialize_vf_entry(). Indeed, that function already sets
vf->num_vf_qs, as well as initializes the allow list via calling
ice_vc_set_default_allowlist().

Move this logic into ice_initialize_vf_entry(). This makes the code clear,
and ensures that these VF fields will be initialized properly for both
SR-IOV VFs and the upcoming Scalable IOV VFs.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12 10:34:29 -07:00
Jakub Buchocki
ae67389c53 ice: Implement 'flow-type ether' rules
Add support for 'flow-type ether' Flow Director rules via ethtool.

Create packet segment info for filter configuration based on ethtool
command parameters. Reuse infrastructure already created for
ipv4 and ipv6 flows to convert packet segment into
extraction sequence, which is later used to program the filter
inside Flow Director block of the Rx pipeline.

Rules not containing masks are processed by the Flow Director,
and support the following set of input parameters in all combinations:
src, dst, proto, vlan-etype, vlan, action.

It is possible to specify address mask in ethtool parameters but only
00:00:00:00:00 and FF:FF:FF:FF:FF are valid.
The same applies to proto, vlan-etype and vlan masks:
only 0x0000 and 0xffff masks are valid.

Testing:
  (DUT) iperf3 -s
  (DUT) ethtool -U ens785f0np0 flow-type ether dst <ens785f0np0 mac> \
        action 10
  (DUT) watch 'ethtool -S ens785f0np0 | grep rx_queue'
  (LP)  iperf3 -c ${DUT_IP}

  Counters increase only for:
    'rx_queue_10_packets'
    'rx_queue_10_bytes'

Signed-off-by: Jakub Buchocki <jakubx.buchocki@intel.com>
Co-developed-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Signed-off-by: Mateusz Pacuszka <mateuszx.pacuszka@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12 10:34:24 -07:00
Linus Torvalds
d7ad058156 block-6.9-20240412
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmYZWKYQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgpl7VD/0VyVykpWz9ydtEQvlTLndMASi4U0RpSPPy
 mPX8ydz5k8IywiaAaKxCWK0hCSEXWceQKrbqJqQau9M33JD1Ss7x44BQR/XBZD5J
 vRV5PbnMpIFL1knGzf9xgXKAeEHI2Hi/VKuW3dMoXcXHABfHlbS2ulvpQ97S9oAo
 iCS3728sFOiqcKh2SSSMI04f0o+48F2mh3g8CAd45Kx/kwbEogaxc6U590wbnA+5
 +TTVb+XRT0x55DCq0awtXDxLs4030IkcqJ+S5891m5Dfm8LUt0m0ekr8R9ks/sA+
 +axbcLLw3M3B6QTsT8QCytpAyW5eNBdyGSj4BFl5AOGjUDjuassdzXFtKevItgEd
 kPsuYexNHERnntb+zEXfO7wVvyewy4Dby/WjoYi2hOhvkt73UrR9y93cp3Lq3iI4
 G1+JNLNVkQo/bI0ZtyN5+q39odHcvhGvAr6zAygR+fqU6qOymRvQBpV/bnnMrv2j
 wxlGC5r7tGd7kEwTg/UBK+sVR8OyOm8IJAszK372KRORDRiYLlw7cF+4d5jpG9P5
 frk6z6QrJPoH15iaOjZY62PKEEXiuJbQm2FJYMZvD5upR+UHVvg2xVdLMy/tSnaX
 zgNzlPFPKXXQ72IS8shJ9JE0XZWfZxirbUNIL+1Z2HUUj3t5SduBV/dWEeupPvuv
 5Ml9Lg2uMA==
 =rCiN
 -----END PGP SIGNATURE-----

Merge tag 'block-6.9-20240412' of git://git.kernel.dk/linux

Pull block fixes from Jens Axboe:

 - MD pull request via Song:
       - UAF fix (Yu)

 - Avoid out-of-bounds shift in blk-iocost (Rik)

 - Fix for q->blkg_list corruption (Ming)

 - Relax virt boundary mask/size segment checking (Ming)

* tag 'block-6.9-20240412' of git://git.kernel.dk/linux:
  block: fix that blk_time_get_ns() doesn't update time after schedule
  block: allow device to have both virt_boundary_mask and max segment size
  block: fix q->blkg_list corruption during disk rebind
  blk-iocost: avoid out of bounds shift
  raid1: fix use-after-free for original bio in raid1_write_request()
2024-04-12 10:22:33 -07:00
Maximilian Luz
ecda830909 arm64: dts: qcom: sc8180x: Fix ss_phy_irq for secondary USB controller
The ACPI DSDT of the Surface Pro X (SQ2) specifies the interrupts for
the secondary UBS controller as

    Name (_CRS, ResourceTemplate ()
    {
        Interrupt (ResourceConsumer, Level, ActiveHigh, Shared, ,, )
        {
            0x000000AA,
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x000000A7,     // hs_phy_irq: &intc GIC_SPI 136
        }
        Interrupt (ResourceConsumer, Level, ActiveHigh, SharedAndWake, ,, )
        {
            0x00000228,     // ss_phy_irq: &pdc 40
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020A,     // dm_hs_phy_irq: &pdc 10
        }
        Interrupt (ResourceConsumer, Edge, ActiveHigh, SharedAndWake, ,, )
        {
            0x0000020B,     // dp_hs_phy_irq: &pdc 11
        }
    })

Generally, the interrupts above 0x200 map to the PDC interrupts (as used
in the devicetree) as ACPI_NUMBER - 0x200. Note that this lines up with
dm_hs_phy_irq and dp_hs_phy_irq (as well as the interrupts for the
primary USB controller).

Based on the snippet above, ss_phy_irq should therefore be PDC 40 (=
0x28) and not PDC 7. The latter is according to ACPI instead used as
ss_phy_irq for port 0 of the multiport USB controller). Fix this by
setting ss_phy_irq to '&pdc 40'.

Fixes: b080f53a8f ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20240328022224.336938-1-luzmaximilian@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12 12:21:47 -05:00
Manivannan Sadhasivam
6d3bd106ad arm64: dts: qcom: sm8650: Fix the msi-map entries
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.

But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.

Fixes: a33a532b3b ("arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-3-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12 12:21:47 -05:00
Manivannan Sadhasivam
98a953fa2f arm64: dts: qcom: sm8550: Fix the msi-map entries
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.

But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.

Fixes: 114990ce3e ("arm64: dts: qcom: sm8550: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-2-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12 12:21:47 -05:00
Manivannan Sadhasivam
ecc3ac293e arm64: dts: qcom: sm8450: Fix the msi-map entries
While adding the GIC ITS MSI support, it was found that the msi-map entries
needed to be swapped to receive MSIs from the endpoint.

But later it was identified that the swapping was needed due to a bug in
the Qualcomm PCIe controller driver. And since the bug is now fixed with
commit bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly"),
let's fix the msi-map entries also to reflect the actual mapping in the
hardware.

Cc: stable@vger.kernel.org # 6.3: bf79e33cdd ("PCI: qcom: Enable BDF to SID translation properly")
Fixes: ff384ab56f ("arm64: dts: qcom: sm8450: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240318-pci-bdf-sid-fix-v1-1-acca6c5d9cf1@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12 12:21:47 -05:00
Johan Hovold
8b8ec83a1d arm64: dts: qcom: sc8280xp: add missing PCIe minimum OPP
Add the missing PCIe CX performance level votes to avoid relying on
other drivers (e.g. USB or UFS) to maintain the nominal performance
level required for Gen3 speeds.

Fixes: 813e831570 ("arm64: dts: qcom: sc8280xp/sa8540p: add PCIe2-4 nodes")
Cc: stable@vger.kernel.org      # 6.2
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240306095651.4551-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12 12:21:47 -05:00
Rajendra Nayak
cb939b9b35 arm64: dts: qcom: x1e80100: Fix the compatible for cluster idle states
The compatible's for the cluster/domain idle states of x1e80100
are wrong, fix it.

Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240317132918.1068817-1-quic_rjendra@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12 12:21:46 -05:00
Luca Weiss
f011688162 arm64: dts: qcom: Fix type of "wdog" IRQs for remoteprocs
The code in qcom_q6v5_init() requests the "wdog" IRQ as
IRQF_TRIGGER_RISING. If dt defines the interrupt type as LEVEL_HIGH then
the driver will have issues getting the IRQ again after probe deferral
with an error like:

  irq: type mismatch, failed to map hwirq-14 for interrupt-controller@b220000!

Fix that by updating the devicetrees to use IRQ_TYPE_EDGE_RISING for
these interrupts, as is already used in most dt's. Also the driver was
already using the interrupts with that type.

Fixes: 3658e411ef ("arm64: dts: qcom: sc7280: Add ADSP node")
Fixes: df62402e5f ("arm64: dts: qcom: sc7280: Add CDSP node")
Fixes: 152d1faf1e ("arm64: dts: qcom: add SC8280XP platform")
Fixes: 8eb5287e8a ("arm64: dts: qcom: sm6350: Add CDSP nodes")
Fixes: efc33c969f ("arm64: dts: qcom: sm6350: Add ADSP nodes")
Fixes: fe6fd26aed ("arm64: dts: qcom: sm6375: Add ADSP&CDSP")
Fixes: 23a8903785 ("arm64: dts: qcom: sm8250: Add remoteprocs")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20240219-remoteproc-irqs-v1-1-c5aeb02334bd@fairphone.com
[bjorn: Added fixes references]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-04-12 12:21:46 -05:00
Linus Torvalds
c7adbe2eb7 io_uring-6.9-20240412
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAmYZWJQQHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgprlZEACKCVoeCG6JJ5u4do3YvQcYu4cYHAkixCqj
 wFJnJ+vZBvv/DLi04SjKPZWFWiR3z4GFGEkZxgOakLYxJRQ8gnvosn65V/aH8qMR
 UK03E6fFt5hQ1lgUMbn0HyiiUsoDzsx/WkrQHYr/aQaxgW5827qWPZuKIvRzA6dy
 gPT8Rxcr+IJMcm1iwdiLQbKScFznUzHAmBpE9TXc8rqHRVAzSbd+i8CpVB6+UJGY
 ftkkPQsRRa3PGtQO5Q23F48XI22gRFwDw6x2odieAPGIyNrt8DIIexJeknhJ7JOl
 j5/XAupmS3tNen+scd7l3fD/jToH5yO2a3VpbW6s2ptwHaMVpqRUmCP2BsA6FgSi
 q31GeQC5UJwKc6Bhj5iUZ3HgrTj50V4zobGbb3XNlMfqf+zmKWYm8c56Wl78Jm1X
 WkGIJrxKsRs9ewVxFAm3uYi4SFE1+YNiNTcrHX/d8E93mgoLb0j2z8ay1eWPOY1k
 F4alHFyWEVP/8EQJPfTj2R/EjztHHkzTx+2GPU/dEAVqgs61Hhghwpo/shT/jLrQ
 I0I28+VhBjA2hy6ZZGA6HRQTP7UhMOnR9CmW7ldRse0a9r6UittBaZrABhVb3e0Q
 pw6KcwZNdANODkANS4s+hvce1PEYg5Y/a6OxXY8kTioXBRdjvH4PO3LRVPfN96Ii
 8PrOgM3eqA==
 =M7Ul
 -----END PGP SIGNATURE-----

Merge tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux

Pull io_uring fixes from Jens Axboe:

 - Fix for sigmask restoring while waiting for events (Alexey)

 - Typo fix in comment (Haiyue)

 - Fix for a msg_control retstore on SEND_ZC retries (Pavel)

* tag 'io_uring-6.9-20240412' of git://git.kernel.dk/linux:
  io-uring: correct typo in comment for IOU_F_TWQ_LAZY_WAKE
  io_uring/net: restore msg_control on sendzc retry
  io_uring: Fix io_cqring_wait() not restoring sigmask on get_timespec64() failure
2024-04-12 10:19:36 -07:00
Linus Torvalds
90d3eaaf4f Two CephFS fixes marked for stable and a MAINTAINERS update.
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmYZXkYTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHziyLNCACkJv5GjDeHC22P+UB6re3gO39wdFsL
 BvHmhyebz5iidjS1l6pC/RcLOmB+OwekOiDfFvkwu0E+3d5dZTBInUV4BWzbJVLR
 Hkjd+oCEThV+f58n2Ol/r6lBGIFCgJpgtW02DQurM8wHTLm/vqxpj2GsvJCRXNr6
 lfqWVvZBteEmqxHUGNWldOQh2jNPGyvOpDRCQTzdjEfUAijoc8arLyuwbxl9tFdA
 qVtCZk+Jv0Lz9uQUSsI7aM+SEXUgGW3pZXJL9h9PPjC9d811GCwQnUcL4hNE2B3X
 Nf5Qzo9jV2GKJh8+kHui0dmpt0dMQfFZ2YaeJDZl8c8dE2uqBL+zMO79
 =mvie
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "Two CephFS fixes marked for stable and a MAINTAINERS update"

* tag 'ceph-for-6.9-rc4' of https://github.com/ceph/ceph-client:
  MAINTAINERS: remove myself as a Reviewer for Ceph
  ceph: switch to use cap_delay_lock for the unlink delay list
  ceph: redirty page before returning AOP_WRITEPAGE_ACTIVATE
2024-04-12 10:15:46 -07:00
Linus Torvalds
d5cf50dafc Kconfig: add some hidden tabs on purpose
Commit d96c36004e ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig
entry") removed a hidden tab because it apparently showed breakage in
some third-party kernel config parsing tool.

It wasn't clear what tool it was, but let's make sure it gets fixed.
Because if you can't parse tabs as whitespace, you should not be parsing
the kernel Kconfig files.

In fact, let's make such breakage more obvious than some esoteric ftrace
record size option.  If you can't parse tabs, you can't have page sizes.

Yes, tab-vs-space confusion is sadly a traditional Unix thing, and
'make' is famous for being broken in this regard.  But no, that does not
mean that it's ok.

I'd add more random tabs to our Kconfig files, but I don't want to make
things uglier than necessary.  But it *might* bbe necessary if it turns
out we see more of this kind of silly tooling.

Fixes: d96c36004e ("tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry")
Link: https://lore.kernel.org/lkml/CAHk-=wj-hLLN_t_m5OL4dXLaxvXKy_axuoJYXif7iczbfgAevQ@mail.gmail.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-04-12 10:05:10 -07:00
Lukasz Plachno
0a66e97643 ice: Remove unnecessary argument from ice_fdir_comp_rules()
Passing v6 argument is unnecessary as flow_type is still
analyzed inside the function.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-04-12 10:04:38 -07:00
Anton Protopopov
37eacb9f6e bpf: Fix a verifier verbose message
Long ago a map file descriptor in a pseudo ldimm64 instruction could
only be present as an immediate value insn[0].imm, and thus this value
was used in a verbose verifier message printed when the file descriptor
wasn't valid. Since addition of BPF_PSEUDO_MAP_IDX_VALUE/BPF_PSEUDO_MAP_IDX
the insn[0].imm field can also contain an index pointing to the file
descriptor in the attr.fd_array array. However, if the file descriptor
is invalid, the verifier still prints the verbose message containing
value of insn[0].imm. Patch the verifier message to always print the
actual file descriptor value.

Fixes: 387544bfa2 ("bpf: Introduce fd_idx")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240412141100.3562942-1-aspsk@isovalent.com
2024-04-12 18:37:20 +02:00
Wadim Mueller
15f3df3617 dt-bindings: serial: fsl-linflexuart: add compatible for S32G3
Add a compatible string for the uart binding of NXP S32G3 platforms. Here
we use "s32v234-linflexuart" as fallback since the current linflexuart
driver can still work on S32G3.

Signed-off-by: Wadim Mueller <wafgo01@gmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240324214329.29988-3-wafgo01@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
2024-04-12 11:32:02 -05:00
Jiri Olsa
4d4992ff58 selftests/bpf: Add read_trace_pipe_iter function
We have two printk tests reading trace_pipe in non blocking way,
with the very same code. Moving that in new read_trace_pipe_iter
function.

Current read_trace_pipe is used from samples/bpf and needs to
do blocking read and printf of the trace_pipe data, using new
read_trace_pipe_iter to implement that.

Both printk tests do early checks for the number of found messages
and can bail earlier, but I did not find any speed difference w/o
that condition, so I did not complicate the change more for that.

Some of the samples/bpf programs use read_trace_pipe function,
so I kept that interface untouched. I did not see any issues with
affected samples/bpf programs other than there's slight change in
read_trace_pipe output. The current code uses puts that adds new
line after the printed string, so we would occasionally see extra
new line. With this patch we read output per lines, so there's no
need to use puts and we can use just printf instead without extra
new line.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240410140952.292261-1-jolsa@kernel.org
2024-04-12 18:25:21 +02:00
Thorsten Blum
23cc4fe44f bpftool: Fix typo in error message
s/at at/at a/

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240411164258.533063-3-thorsten.blum@toblux.com
2024-04-12 18:19:09 +02:00
Yuntao Wang
ddd53363f8 init/main.c: Minor cleanup for the setup_command_line() function
This is just a minor cleanup to make the code look a bit cleaner.

Link: https://lore.kernel.org/all/20240412081733.35925-3-ytcoode@gmail.com/

Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-04-13 01:03:13 +09:00
Linus Torvalds
5939d45155 Tracing fixes for 6.9:
- Fix the buffer_percent accounting as it is dependent on three variables:
   1) pages_read - number of subbuffers read
   2) pages_lost - number of subbuffers lost due to overwrite
   3) pages_touched - number of pages that a writer entered
   These three counters only increment, and to know how many active pages
   there are on the buffer at any given time, the pages_read and
   pages_lost are subtracted from pages_touched. But the pages touched
   was incremented whenever any writer went to the next subbuffer even
   if it wasn't the only one, so it was incremented more than it should
   be causing the counter for how many subbuffers currently have content
   incorrect, which caused the buffer_percent that holds waiters until
   the ring buffer is filled to a given percentage to wake up early.
 
 - Fix warning of unused functions when PERF_EVENTS is not configured in
 
 - Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE
 
 - Fix to some kerneldoc function comments in eventfs code.
 -----BEGIN PGP SIGNATURE-----
 
 iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZhk+khQccm9zdGVkdEBn
 b29kbWlzLm9yZwAKCRAp5XQQmuv6qvs0AP98c226UFU6Dha4wvgSulC/wKVvHN3X
 jeclMTdn8RGs2gD/b9OULKNv1//6fP16ZRun7ntRQkotVhlNhf9Ee0smiwU=
 =UYrk
 -----END PGP SIGNATURE-----

Merge tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull tracing fixes from Steven Rostedt:

 - Fix the buffer_percent accounting as it is dependent on three
   variables:

     1) pages_read - number of subbuffers read
     2) pages_lost - number of subbuffers lost due to overwrite
     3) pages_touched - number of pages that a writer entered

   These three counters only increment, and to know how many active
   pages there are on the buffer at any given time, the pages_read and
   pages_lost are subtracted from pages_touched.

   But the pages touched was incremented whenever any writer went to the
   next subbuffer even if it wasn't the only one, so it was incremented
   more than it should be causing the counter for how many subbuffers
   currently have content incorrect, which caused the buffer_percent
   that holds waiters until the ring buffer is filled to a given
   percentage to wake up early.

 - Fix warning of unused functions when PERF_EVENTS is not configured in

 - Replace bad tab with space in Kconfig for FTRACE_RECORD_RECURSION_SIZE

 - Fix to some kerneldoc function comments in eventfs code.

* tag 'trace-v6.9-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Only update pages_touched when a new page is touched
  tracing: hide unused ftrace_event_id_fops
  tracing: Fix FTRACE_RECORD_RECURSION_SIZE Kconfig entry
  eventfs: Fix kernel-doc comments to functions
2024-04-12 09:02:24 -07:00
Yuntao Wang
cd24bdb068 init/main.c: Remove redundant space from saved_command_line
There is a space at the end of extra_init_args. In the current logic,
copying extra_init_args to saved_command_line will cause extra spaces
in saved_command_line here or there. Remove the trailing space from
extra_init_args to make the string in saved_command_line look more perfect.

Link: https://lore.kernel.org/all/20240412032950.12687-1-ytcoode@gmail.com/

Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-04-13 01:02:08 +09:00
Rasmus Villemoes
efee03a50c bootconfig: do not put quotes on cmdline items unless necessary
When trying to migrate to using bootconfig to embed the kernel's and
PID1's command line with the kernel image itself, and so allowing
changing that without modifying the bootloader, I noticed that
/proc/cmdline changed from e.g.

  console=ttymxc0,115200n8 cma=128M quiet -- --log-level=notice

to

  console="ttymxc0,115200n8" cma="128M" quiet -- --log-level="notice"

The kernel parameters are parsed just fine, and the quotes are indeed
stripped from the actual argv[] given to PID1. However, the quoting
doesn't really serve any purpose and looks excessive, and might
confuse some (naive) userspace tool trying to parse /proc/cmdline. So
do not quote the value unless it contains whitespace.

Link: https://lore.kernel.org/all/20240308124401.1702046-1-linux@rasmusvillemoes.dk/

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-04-13 01:02:08 +09:00
Yuntao Wang
46dad3c1e5 init/main.c: Fix potential static_command_line memory overflow
We allocate memory of size 'xlen + strlen(boot_command_line) + 1' for
static_command_line, but the strings copied into static_command_line are
extra_command_line and command_line, rather than extra_command_line and
boot_command_line.

When strlen(command_line) > strlen(boot_command_line), static_command_line
will overflow.

This patch just recovers strlen(command_line) which was miss-consolidated
with strlen(boot_command_line) in the commit f5c7310ac7 ("init/main: add
checks for the return value of memblock_alloc*()")

Link: https://lore.kernel.org/all/20240412081733.35925-2-ytcoode@gmail.com/

Fixes: f5c7310ac7 ("init/main: add checks for the return value of memblock_alloc*()")
Cc: stable@vger.kernel.org
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
2024-04-13 00:59:36 +09:00
Colin Ian King
4e124ed0da HID: sony: remove redundant assignment
The variable ret is being assigned a value that is never read
afterwards. The assignment is redundant and can be removed.

Cleans up clang scan build warning:
drivers/hid/hid-sony.c:2020:3: warning: Value stored to 'ret'
is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-04-12 17:55:57 +02:00
Arnd Bergmann
42d34193f9 accel/qaic: mark debugfs stub functions as static inline
The alternative stub functions are listed as global, which produces
a build failure in some configs:

In file included from drivers/accel/qaic/qaic_drv.c:31:
drivers/accel/qaic/qaic_debugfs.h:16:5: error: no previous prototype for 'qaic_bootlog_register' [-Werror=missing-prototypes]
   16 | int qaic_bootlog_register(void) { return 0; }
      |     ^~~~~~~~~~~~~~~~~~~~~
drivers/accel/qaic/qaic_debugfs.h:17:6: error: no previous prototype for 'qaic_bootlog_unregister' [-Werror=missing-prototypes]
   17 | void qaic_bootlog_unregister(void) {}
      |      ^~~~~~~~~~~~~~~~~~~~~~~
drivers/accel/qaic/qaic_debugfs.h:18:6: error: no previous prototype for 'qaic_debugfs_init' [-Werror=missing-prototypes]
   18 | void qaic_debugfs_init(struct qaic_drm_device *qddev) {}
      |      ^~~~~~~~~~~~~~~~~

Make them static inline as intended.

Fixes: 5f8df5c6de ("accel/qaic: Add bootlog debugfs")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409133945.2976190-1-arnd@kernel.org
2024-04-12 09:53:28 -06:00
Jeffrey Hugo
76b801aa21 accel/qaic: Add Sahara implementation for firmware loading
The AIC100 secondary bootloader uses the Sahara protocol for two
purposes - loading the runtime firmware images from the host, and
offloading crashdumps to the host. The crashdump functionality is only
invoked when the AIC100 device encounters a crash and dumps are enabled.
Also the collection of the dump is optional - the host can reject
collecting the dump.

The Sahara protocol contains many features and modes including firmware
upload, crashdump download, and client commands. For simplicity,
implement the parts of the protocol needed for loading firmware to the
device.

Fundamentally, the Sahara protocol is an embedded file transfer
protocol. Both sides negotiate a connection through a simple exchange of
hello messages. After handshaking through a hello message, the device
either sends a message requesting images, or a message advertising the
memory dump available for the host. For image transfer, the remote device
issues a read data request that provides an image (by ID), an offset, and
a length. The host has an internal mapping of image IDs to filenames. The
host is expected to access the image and transfer the requested chunk to
the device. The device can issue additional read requests, or signal that
it has consumed enough data from this image with an end of image message.
The host confirms the end of image, and the device can proceed with
another image by starting over with the hello exchange again.

Some images may be optional, and only provided as part of a provisioning
flow. The host is not aware of this information, and thus should report
an error to the device when an image is not available. The device will
evaluate if the image is required or not, and take the appropriate
action.

Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240322034917.3522388-1-quic_jhugo@quicinc.com
2024-04-12 09:49:31 -06:00
Abdelrahman Morsy
3cba9cfcc1 HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabled
If the device is unplugged and CONFIG_IIO is not supported, this will
result in a warning message at kernel/workqueue.

Only cancel delayed work in mcp2221_remove(), when CONFIG_IIO is enabled.

Signed-off-by: Abdelrahman Morsy <abdelrahmanhesham94@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
2024-04-12 17:48:53 +02:00
Linus Torvalds
e00011a146 Fix for syscall_get_nr() to make it work even if tracing is disabled
-----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAmYY7QoaHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHDuJxAAhS4A48oPpC98MvxzzIUz
 xJIOoJbQZuFK7rEd2CEusbt4Ri3tojsIQ1IqLKEGHq6OJxuWS8U9egn8wQZVcO3s
 BsJrtfiu4jEhUohWNDzVG7XiMc+/H1vRN7/BXV3Fvl8bSvwouqWcYfMU/0qe7Ntq
 X34aidIvVLUCDZPz/LMUXGoaxW2oA2yAEuH+LaLfW/sZ+FWzM9f1e6BgxzV5HnqV
 qeRiZq56C1y2UMUbbgoLdHlP0T2PgiZ4eZ3wzlw9goka47hXUQlvPvg6x7pCv+ZS
 9mOZWMqTiMczhQlm3jjeKBo45eVKLnf6QfV3Sr4TwRYoxoO95hTEsgf6JTgprxiP
 +M5BG5XJchXUE2m3Oi9cnIo9wXcIyj+QlYhxqGPR5zIHcAOOKGUn3E4yuhezbN8X
 tvdF8kUv7He9drRA5rUdZ0AJ1P+nooaBfEPoIPhb7laSxlyXi4SGLKziY9CRdiMq
 jxJezT2ES75cz66XMHJMSCZTHEF4rthVA6UsTa3gGer2BEKWAMFZ2zoMTv1ZO9Mo
 tcxsSonL2vfW99lcFt8PWAucoVi0EjB0sxDASccg0NS/sT6hBb9qrWuG3Bq9u2N7
 DzWPO1275yMuPwYxWpjxQ5bDMBnT/TzPxSv06obFayCip6NJABHAYpZ/gzK8CaaD
 bGmMowZIPpsdoUzrIdFN3DA=
 =fJiH
 -----END PGP SIGNATURE-----

Merge tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fix from Thomas Bogendoerfer:
 "Fix for syscall_get_nr() to make it work even if tracing is disabled"

* tag 'mips-fixes_6.9_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: scall: Save thread_info.syscall unconditionally on entry
2024-04-12 08:46:58 -07:00
Ryan Roberts
0e9df1c905 arm64: mm: Don't remap pgtables for allocate vs populate
During linear map pgtable creation, each pgtable is fixmapped /
fixunmapped twice; once during allocation to zero the memory, and a
again during population to write the entries. This means each table has
2 TLB invalidations issued against it. Let's fix this so that each table
is only fixmapped/fixunmapped once, halving the number of TLBIs, and
improving performance.

Achieve this by separating allocation and initialization (zeroing) of
the page. The allocated page is now fixmapped directly by the walker and
initialized, before being populated and finally fixunmapped.

This approach keeps the change small, but has the side effect that late
allocations (using __get_free_page()) must also go through the generic
memory clearing routine. So let's tell __get_free_page() not to zero the
memory to avoid duplication.

Additionally this approach means that fixmap/fixunmap is still used for
late pgtable modifications. That's not technically needed since the
memory is all mapped in the linear map by that point. That's left as a
possible future optimization if found to be needed.

Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:

               | Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
               | VM, 16G     | VM, 64G     | VM, 256G    | Metal, 512G
---------------|-------------|-------------|-------------|-------------
               |   ms    (%) |   ms    (%) |   ms    (%) |    ms    (%)
---------------|-------------|-------------|-------------|-------------
before         |   11   (0%) |  161   (0%) |  656   (0%) |  1654   (0%)
after          |   10 (-11%) |  104 (-35%) |  438 (-33%) |  1223 (-26%)

Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-4-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-12 16:45:05 +01:00
Ryan Roberts
1fcb7cea8a arm64: mm: Batch dsb and isb when populating pgtables
After removing uneccessary TLBIs, the next bottleneck when creating the
page tables for the linear map is DSB and ISB, which were previously
issued per-pte in __set_pte(). Since we are writing multiple ptes in a
given pte table, we can elide these barriers and insert them once we
have finished writing to the table.

Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:

               | Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
               | VM, 16G     | VM, 64G     | VM, 256G    | Metal, 512G
---------------|-------------|-------------|-------------|-------------
               |   ms    (%) |   ms    (%) |   ms    (%) |    ms    (%)
---------------|-------------|-------------|-------------|-------------
before         |   78   (0%) |  435   (0%) | 1723   (0%) |  3779   (0%)
after          |   11 (-86%) |  161 (-63%) |  656 (-62%) |  1654 (-56%)

Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-3-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-12 16:45:05 +01:00
Ryan Roberts
5c63db59c5 arm64: mm: Don't remap pgtables per-cont(pte|pmd) block
A large part of the kernel boot time is creating the kernel linear map
page tables. When rodata=full, all memory is mapped by pte. And when
there is lots of physical ram, there are lots of pte tables to populate.
The primary cost associated with this is mapping and unmapping the pte
table memory in the fixmap; at unmap time, the TLB entry must be
invalidated and this is expensive.

Previously, each pmd and pte table was fixmapped/fixunmapped for each
cont(pte|pmd) block of mappings (16 entries with 4K granule). This means
we ended up issuing 32 TLBIs per (pmd|pte) table during the population
phase.

Let's fix that, and fixmap/fixunmap each page once per population, for a
saving of 31 TLBIs per (pmd|pte) table. This gives a significant boot
speedup.

Execution time of map_mem(), which creates the kernel linear map page
tables, was measured on different machines with different RAM configs:

               | Apple M2 VM | Ampere Altra| Ampere Altra| Ampere Altra
               | VM, 16G     | VM, 64G     | VM, 256G    | Metal, 512G
---------------|-------------|-------------|-------------|-------------
               |   ms    (%) |   ms    (%) |   ms    (%) |    ms    (%)
---------------|-------------|-------------|-------------|-------------
before         |  168   (0%) | 2198   (0%) | 8644   (0%) | 17447   (0%)
after          |   78 (-53%) |  435 (-80%) | 1723 (-80%) |  3779 (-78%)

Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Tested-by: Itaru Kitayama <itaru.kitayama@fujitsu.com>
Tested-by: Eric Chanudet <echanude@redhat.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20240412131908.433043-2-ryan.roberts@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-12 16:45:05 +01:00
Linus Torvalds
d1c13e8004 drm fixes for 6.9-rc4
client:
 - Protect connector modes with mode_config mutex
 
 ast:
 - Fix soft lockup
 
 host1x:
 - Do not setup DMA for virtual addresses
 
 ivpu:
 - Fix deadlock in context_xa
 - PCI fixes
 - Fixes to error handling
 
 nouveau:
 - gsp: Fix OOB access
 - Fix casting
 
 panfrost:
 - Fix error path in MMU code
 
 qxl:
 - Revert "drm/qxl: simplify qxl_fence_wait"
 
 vmwgfx:
 - Enable DMA for SEV mappings
 
 i915:
 - Couple CDCLK programming fixes
 - HDCP related fix
 - 4 Bigjoiner related fixes
 - Fix for a circular locking around GuC on reset+wedged case
 
 xe:
 - Fix double display mutex initializations
 - Fix u32 -> u64 implicit conversions
 - Fix RING_CONTEXT_CONTROL not marked as masked
 
 msm:
 - DP refcount leak fix on disconnect
 - Add missing newlines to prints in msm_fb and msm_kms
 - fix dpu debugfs entry permissions
 - Fix the interface table for the catalog of X1E80100
 - fix irq message printing
 - Bindings fix to add DP node as child of mdss for mdss node
 - Minor typo fix in DP driver API which handles port status change
 - fix CHRASHDUMP_READ()
 - fix HHB (highest bank bit) for a619 to fix UBWC corruption
 
 amdgpu:
 - GPU reset fixes
 - Fix some confusing logging
 - UMSCH fix
 - Aborted suspend fix
 - DCN 3.5 fixes
 - S4 fix
 - MES logging fixes
 - SMU 14 fixes
 - SDMA 4.4.2 fix
 - KASAN fix
 - SMU 13.0.10 fix
 - VCN partition fix
 - GFX11 fixes
 - DWB fixes
 - Plane handling fix
 - FAMS fix
 - DCN 3.1.6 fix
 - VSC SDP fixes
 - OLED panel fix
 - GFX 11.5 fix
 
 amdkfd:
 - GPU reset fixes
 - fix ioctl integer overflow
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmYYjYoACgkQDHTzWXnE
 hr5+AhAAqM5ZXNEC5Y5zbxqLmMyr08sn4lm/fE0CNZYPoRXerBJIOTXvc8V9YL9W
 5Nxux+5qLzLrIOKdY5PIGEyq0TlA53ZyR0GSF3NfFDxI2OiBRbuRpS6obuimPRY6
 bHdfb89S3TRj3XtP7eJs3fuejygAzLDg+4AXIEF9htlXVARrEBVA2Cw1Km0goWoa
 uXhfLlt9tycIdtuedpPDnetZGlffZa1eCFqFlDJg671moEdQDfdSSsgVtkaDkAy1
 Cy1jdu4+9WHTNAS6kGHy8iB7Ebq+n6UKiBr3o9GoWTIgqVz33FeMU1zrJ2IdwNNK
 nuPBeyk7Z125VEntyj+29GdLRcKv+K75zbdoKrifYp5/937DBjpiJ5bcqOnZdDVG
 hc6IPeMWcvLJ10W+ZrtUqs7BA2cS2dO06uBKEHqNL5Th/TmOSpyKeS/JOtU9Tpkq
 b2OkGy/H+20wXFBFmanLlPuS0lrvuUkLi7bIvtqZq2e5vOHbm4xKLrCDPWFtp1sR
 ohkDtqmkGocQz5l0Ublqdcnrtttg3+Rr5Jh+cCkq5f9gEqsbQWEoPzG9dyZOOBq2
 xEtWf5enH+3J711/9FB8+aWD+j7T04a7ZEODeDDAQBwgW6gMYeGHQPKvTWC0xkYX
 8LBYvxfV1TSK+4l3geF9m+MQuZnuX1sZ5QSh7b/nfBvxMaFVJ84=
 =tDFk
 -----END PGP SIGNATURE-----

Merge tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Looks like everyone woke up after holidays, this weeks pull has a
  bunch of stuff all over, 2 weeks worth of amdgpu is a lot of it, then
  i915/xe have a few, a bunch of msm fixes, then some scattered driver
  fixes.

  I expect things will settle down for rc5.

  client:
   - Protect connector modes with mode_config mutex

  ast:
   - Fix soft lockup

  host1x:
   - Do not setup DMA for virtual addresses

  ivpu:
   - Fix deadlock in context_xa
   - PCI fixes
   - Fixes to error handling

  nouveau:
   - gsp: Fix OOB access
   - Fix casting

  panfrost:
   - Fix error path in MMU code

  qxl:
   - Revert "drm/qxl: simplify qxl_fence_wait"

  vmwgfx:
   - Enable DMA for SEV mappings

  i915:
   - Couple CDCLK programming fixes
   - HDCP related fix
   - 4 Bigjoiner related fixes
   - Fix for a circular locking around GuC on reset+wedged case

  xe:
   - Fix double display mutex initializations
   - Fix u32 -> u64 implicit conversions
   - Fix RING_CONTEXT_CONTROL not marked as masked

  msm:
   - DP refcount leak fix on disconnect
   - Add missing newlines to prints in msm_fb and msm_kms
   - fix dpu debugfs entry permissions
   - Fix the interface table for the catalog of X1E80100
   - fix irq message printing
   - Bindings fix to add DP node as child of mdss for mdss node
   - Minor typo fix in DP driver API which handles port status change
   - fix CHRASHDUMP_READ()
   - fix HHB (highest bank bit) for a619 to fix UBWC corruption

  amdgpu:
   - GPU reset fixes
   - Fix some confusing logging
   - UMSCH fix
   - Aborted suspend fix
   - DCN 3.5 fixes
   - S4 fix
   - MES logging fixes
   - SMU 14 fixes
   - SDMA 4.4.2 fix
   - KASAN fix
   - SMU 13.0.10 fix
   - VCN partition fix
   - GFX11 fixes
   - DWB fixes
   - Plane handling fix
   - FAMS fix
   - DCN 3.1.6 fix
   - VSC SDP fixes
   - OLED panel fix
   - GFX 11.5 fix

  amdkfd:
   - GPU reset fixes
   - fix ioctl integer overflow"

* tag 'drm-fixes-2024-04-12' of https://gitlab.freedesktop.org/drm/kernel: (65 commits)
  amdkfd: use calloc instead of kzalloc to avoid integer overflow
  drm/xe: Label RING_CONTEXT_CONTROL as masked
  drm/xe/xe_migrate: Cast to output precision before multiplying operands
  drm/xe/hwmon: Cast result to output precision on left shift of operand
  drm/xe/display: Fix double mutex initialization
  drm/amdgpu: differentiate external rev id for gfx 11.5.0
  drm/amd/display: Adjust dprefclk by down spread percentage.
  drm/amd/display: Set VSC SDP Colorimetry same way for MST and SST
  drm/amd/display: Program VSC SDP colorimetry for all DP sinks >= 1.4
  drm/amd/display: fix disable otg wa logic in DCN316
  drm/amd/display: Do not recursively call manual trigger programming
  drm/amd/display: always reset ODM mode in context when adding first plane
  drm/amdgpu: fix incorrect number of active RBs for gfx11
  drm/amd/display: Return max resolution supported by DWB
  amd/amdkfd: sync all devices to wait all processes being evicted
  drm/amdgpu: clear set_q_mode_offs when VM changed
  drm/amdgpu: Fix VCN allocation in CPX partition
  drm/amd/pm: fix the high voltage issue after unload
  drm/amd/display: Skip on writeback when it's not applicable
  drm/amdgpu: implement IRQ_STATE_ENABLE for SDMA v4.4.2
  ...
2024-04-12 08:27:09 -07:00
Siddharth Vadapalli
01fec70206
dt-bindings: PCI: ti,j721e-pci-host: Add support for J722S SoC
TI's J722S SoC has one instance of a Gen3 Single-Lane PCIe controller.
The controller on J722S SoC is similar to the one present on TI's AM64
SoC, with the difference being that the controller on AM64 SoC supports
up to Gen2 link speed while the one on J722S SoC supports Gen3 link speed.

Update the bindings with a new compatible for J722S SoC.

Technical Reference Manual of J722S SoC: https://www.ti.com/lit/zip/sprujb3

Link: https://lore.kernel.org/linux-pci/20240124122936.816142-1-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-12 15:11:49 +00:00
Geert Uytterhoeven
78d212851f
dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties
make dtbs_check:

    arch/arm64/boot/dts/renesas/r8a77951-salvator-xs.dtb: pcie@fe000000: Unevaluated properties are not allowed ('iommu-map', 'iommu-map-mask' were unexpected)
	    from schema $id: http://devicetree.org/schemas/pci/rcar-pci-host.yaml#

Fix this by adding the missing IOMMU-related properties.

[kwilczynski: added missing Fixes: tag]
Fixes: 0d69ce3c2c ("dt-bindings: PCI: rcar-pci-host: Convert bindings to json-schema")
Link: https://lore.kernel.org/linux-pci/babc878a93cb6461a5d39331f8ecfa654dfda921.1706802597.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
2024-04-12 15:11:48 +00:00
Siddharth Vadapalli
b7a791b264
dt-bindings: PCI: ti,j721e-pci-host: Add device-id for TI's J784S4 SoC
Add the device-id of 0xb012 for the PCIe controller on the J784S4 SoC as
described in the CTRL_MMR_PCI_DEVICE_ID register's PCI_DEVICE_ID_DEVICE_ID
field. The Register descriptions and the Technical Reference Manual for
J784S4 SoC can be found at: https://www.ti.com/lit/zip/spruj52

Link: https://lore.kernel.org/linux-pci/20240401110951.3816291-1-s-vadapalli@ti.com
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
2024-04-12 15:11:45 +00:00
Bitao Hu
e9a9292e23 watchdog/softlockup: Report the most frequent interrupts
When the watchdog determines that the current soft lockup is due to an
interrupt storm based on CPU utilization, reporting the most frequent
interrupts could be good enough for further troubleshooting.

Below is an example of interrupt storm. The call tree does not provide
useful information, but analyzing which interrupt caused the soft lockup by
comparing the counts of interrupts during the lockup period allows to
identify the culprit.

[  638.870231] watchdog: BUG: soft lockup - CPU#9 stuck for 26s! [swapper/9:0]
[  638.870825] CPU#9 Utilization every 4s during lockup:
[  638.871194]  #1:   0% system,          0% softirq,   100% hardirq,     0% idle
[  638.871652]  #2:   0% system,          0% softirq,   100% hardirq,     0% idle
[  638.872107]  #3:   0% system,          0% softirq,   100% hardirq,     0% idle
[  638.872563]  #4:   0% system,          0% softirq,   100% hardirq,     0% idle
[  638.873018]  #5:   0% system,          0% softirq,   100% hardirq,     0% idle
[  638.873494] CPU#9 Detect HardIRQ Time exceeds 50%. Most frequent HardIRQs:
[  638.873994]  #1: 330945      irq#7
[  638.874236]  #2: 31          irq#82
[  638.874493]  #3: 10          irq#10
[  638.874744]  #4: 2           irq#89
[  638.874992]  #5: 1           irq#102
...
[  638.875313] Call trace:
[  638.875315]  __do_softirq+0xa8/0x364

Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Liu Song <liusong@linux.alibaba.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240411074134.30922-6-yaoma@linux.alibaba.com
2024-04-12 17:08:06 +02:00
Bitao Hu
d7037381d0 watchdog/softlockup: Low-overhead detection of interrupt storm
The following softlockup is caused by interrupt storm, but it cannot be
identified from the call tree. Because the call tree is just a snapshot
and doesn't fully capture the behavior of the CPU during the soft lockup.
  watchdog: BUG: soft lockup - CPU#28 stuck for 23s! [fio:83921]
  ...
  Call trace:
    __do_softirq+0xa0/0x37c
    __irq_exit_rcu+0x108/0x140
    irq_exit+0x14/0x20
    __handle_domain_irq+0x84/0xe0
    gic_handle_irq+0x80/0x108
    el0_irq_naked+0x50/0x58

Therefore, it is necessary to report CPU utilization during the
softlockup_threshold period (report once every sample_period, for a total
of 5 reportings), like this:
  watchdog: BUG: soft lockup - CPU#28 stuck for 23s! [fio:83921]
  CPU#28 Utilization every 4s during lockup:
    #1: 0% system, 0% softirq, 100% hardirq, 0% idle
    #2: 0% system, 0% softirq, 100% hardirq, 0% idle
    #3: 0% system, 0% softirq, 100% hardirq, 0% idle
    #4: 0% system, 0% softirq, 100% hardirq, 0% idle
    #5: 0% system, 0% softirq, 100% hardirq, 0% idle
  ...

This is helpful in determining whether an interrupt storm has occurred or
in identifying the cause of the softlockup. The criteria for determination
are as follows:

  a. If the hardirq utilization is high, then interrupt storm should be
     considered and the root cause cannot be determined from the call tree.
  b. If the softirq utilization is high, then the call might not necessarily
     point at the root cause.
  c. If the system utilization is high, then analyzing the root
     cause from the call tree is possible in most cases.

The mechanism requires a considerable amount of global storage space
when configured for the maximum number of CPUs. Therefore, adding a
SOFTLOCKUP_DETECTOR_INTR_STORM Kconfig knob that defaults to "yes"
if the max number of CPUs is <= 128.

Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Liu Song <liusong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240411074134.30922-5-yaoma@linux.alibaba.com
2024-04-12 17:08:05 +02:00
Bitao Hu
25a4a01511 genirq: Avoid summation loops for /proc/interrupts
show_interrupts() unconditionally accumulates the per CPU interrupt
statistics to determine whether an interrupt was ever raised.

This can be avoided for all interrupts which are not strictly per CPU
and not of type NMI because those interrupts provide already an
accumulated counter. The required logic is already implemented in
kstat_irqs().

Split the inner access logic out of kstat_irqs() and use it for
kstat_irqs() and show_interrupts() to avoid the accumulation loop
when possible.

Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Liu Song <liusong@linux.alibaba.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240411074134.30922-4-yaoma@linux.alibaba.com
2024-04-12 17:08:05 +02:00
Bitao Hu
99cf63c566 genirq: Provide a snapshot mechanism for interrupt statistics
The soft lockup detector lacks a mechanism to identify interrupt storms as
root cause of a lockup. To enable this the detector needs a mechanism to
snapshot the interrupt count statistics on a CPU when the detector observes
a potential lockup scenario and compare that against the interrupt count
when it warns about the lockup later on. The number of interrupts in that
period give a hint whether the lockup might have been caused by an interrupt
storm.

Instead of having extra storage in the lockup detector and accessing the
internals of the interrupt descriptor directly, add a snapshot member to
the per CPU irq_desc::kstat_irq structure and provide interfaces to take a
snapshot of all interrupts on the current CPU and to retrieve the delta of
a specific interrupt later on.

Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240411074134.30922-3-yaoma@linux.alibaba.com
2024-04-12 17:08:05 +02:00
Bitao Hu
86d2a2f51f genirq: Convert kstat_irqs to a struct
The irq_desc::kstat_irqs member is a per-CPU variable of type int, which is
only capable of counting. A snapshot mechanism for interrupt statistics
will be added soon, which requires an additional variable to store the
snapshot.

To facilitate expansion, convert kstat_irqs here to a struct containing
only the count.

Originally-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Bitao Hu <yaoma@linux.alibaba.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240411074134.30922-2-yaoma@linux.alibaba.com
2024-04-12 17:08:05 +02:00
Ian Rogers
0ffc8fca5c perf dsos: Switch more loops to dsos__for_each_dso()
Switch loops within dsos.c, add a version that isn't locked. Switch
some unlocked loops to hold the read lock.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-12 12:04:13 -03:00
Ian Rogers
1d6eff9305 perf dso: Move dso functions out of dsos.c
Move dso and dso_id functions to dso.c to match the struct declarations.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-12 12:04:13 -03:00
Ian Rogers
73f3fea2e1 perf dsos: Introduce dsos__for_each_dso()
To better abstract the dsos internals, introduce dsos__for_each_dso that
does a callback on each dso.

This also means the read lock can be correctly held.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-12 12:04:13 -03:00
Ian Rogers
f649ed80f3 perf dsos: Tidy reference counting and locking
Move more functionality into dsos.c generally from machine.c, renaming
functions to match their new usage.

The find function is made to always "get" before returning a dso.

Reduce the scope of locks in vdso to match the locking paradigm.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-12 12:04:13 -03:00
Ian Rogers
83acca9f90 perf dsos: Attempt to better abstract DSOs internals
Move functions from machine and build-id to dsos. Pass 'struct dsos'
rather than internal state.

Rename some functions to better represent which data structure they
operate on.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anne Macedo <retpolanne@posteo.net>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Changbin Du <changbin.du@huawei.com>
Cc: Chengen Du <chengen.du@canonical.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Leo Yan <leo.yan@linux.dev>
Cc: Li Dong <lidong@vivo.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Markus Elfring <Markus.Elfring@web.de>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paran Lee <p4ranlee@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Song Liu <song@kernel.org>
Cc: Sun Haiyong <sunhaiyong@loongson.cn>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Cc: zhaimingbing <zhaimingbing@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20240410064214.2755936-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-12 12:04:13 -03:00
Adrian Hunter
792bc998ba perf record: Fix debug message placement for test consumption
evlist__config() might mess up the debug output consumed by test
"Test per-thread recording" in "Miscellaneous Intel PT testing".

Move it out from between the debug prints:

  "perf record opening and mmapping events" and
  "perf record done opening and mmapping events"

Fixes: da4062021e ("perf tools: Add debug messages and comments for testing")
Closes: https://lore.kernel.org/linux-perf-users/ZhVfc5jYLarnGzKa@x1/
Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240411075447.17306-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2024-04-12 12:02:06 -03:00