Consider the following scenario:
.ndo_bpf() | ice_prepare_for_reset() |
________________________|_______________________________________|
rtnl_lock() | |
ice_down() | |
| test_bit(ICE_VSI_DOWN) - true |
| ice_dis_vsi() returns |
ice_up() | |
| proceeds to rebuild a running VSI |
.ndo_bpf() is not the only rtnl-locked callback that toggles the interface
to apply new configuration. Another example is .set_channels().
To avoid the race condition above, act only after reading ICE_VSI_DOWN
under rtnl_lock.
Fixes: 0f9d5027a7 ("ice: Refactor VSI allocation, deletion and rebuild flow")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If VSI rebuild is pending, .ndo_bpf() can attach/detach the XDP program on
VSI without applying new ring configuration. When unconfiguring the VSI, we
can encounter the state in which there is an XDP program but no XDP rings
to destroy or there will be XDP rings that need to be destroyed, but no XDP
program to indicate their presence.
When unconfiguring, rely on the presence of XDP rings rather then XDP
program, as they better represent the current state that has to be
destroyed.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The main threat to data consistency in ice_xdp() is a possible asynchronous
PF reset. It can be triggered by a user or by TX timeout handler.
XDP setup and PF reset code access the same resources in the following
sections:
* ice_vsi_close() in ice_prepare_for_reset() - already rtnl-locked
* ice_vsi_rebuild() for the PF VSI - not protected
* ice_vsi_open() - already rtnl-locked
With an unfortunate timing, such accesses can result in a crash such as the
one below:
[ +1.999878] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 14
[ +2.002992] ice 0000:b1:00.0: Registered XDP mem model MEM_TYPE_XSK_BUFF_POOL on Rx ring 18
[Mar15 18:17] ice 0000:b1:00.0 ens801f0np0: NETDEV WATCHDOG: CPU: 38: transmit queue 14 timed out 80692736 ms
[ +0.000093] ice 0000:b1:00.0 ens801f0np0: tx_timeout: VSI_num: 6, Q 14, NTC: 0x0, HW_HEAD: 0x0, NTU: 0x0, INT: 0x4000001
[ +0.000012] ice 0000:b1:00.0 ens801f0np0: tx_timeout recovery level 1, txqueue 14
[ +0.394718] ice 0000:b1:00.0: PTP reset successful
[ +0.006184] BUG: kernel NULL pointer dereference, address: 0000000000000098
[ +0.000045] #PF: supervisor read access in kernel mode
[ +0.000023] #PF: error_code(0x0000) - not-present page
[ +0.000023] PGD 0 P4D 0
[ +0.000018] Oops: 0000 [#1] PREEMPT SMP NOPTI
[ +0.000023] CPU: 38 PID: 7540 Comm: kworker/38:1 Not tainted 6.8.0-rc7 #1
[ +0.000031] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[ +0.000036] Workqueue: ice ice_service_task [ice]
[ +0.000183] RIP: 0010:ice_clean_tx_ring+0xa/0xd0 [ice]
[...]
[ +0.000013] Call Trace:
[ +0.000016] <TASK>
[ +0.000014] ? __die+0x1f/0x70
[ +0.000029] ? page_fault_oops+0x171/0x4f0
[ +0.000029] ? schedule+0x3b/0xd0
[ +0.000027] ? exc_page_fault+0x7b/0x180
[ +0.000022] ? asm_exc_page_fault+0x22/0x30
[ +0.000031] ? ice_clean_tx_ring+0xa/0xd0 [ice]
[ +0.000194] ice_free_tx_ring+0xe/0x60 [ice]
[ +0.000186] ice_destroy_xdp_rings+0x157/0x310 [ice]
[ +0.000151] ice_vsi_decfg+0x53/0xe0 [ice]
[ +0.000180] ice_vsi_rebuild+0x239/0x540 [ice]
[ +0.000186] ice_vsi_rebuild_by_type+0x76/0x180 [ice]
[ +0.000145] ice_rebuild+0x18c/0x840 [ice]
[ +0.000145] ? delay_tsc+0x4a/0xc0
[ +0.000022] ? delay_tsc+0x92/0xc0
[ +0.000020] ice_do_reset+0x140/0x180 [ice]
[ +0.000886] ice_service_task+0x404/0x1030 [ice]
[ +0.000824] process_one_work+0x171/0x340
[ +0.000685] worker_thread+0x277/0x3a0
[ +0.000675] ? preempt_count_add+0x6a/0xa0
[ +0.000677] ? _raw_spin_lock_irqsave+0x23/0x50
[ +0.000679] ? __pfx_worker_thread+0x10/0x10
[ +0.000653] kthread+0xf0/0x120
[ +0.000635] ? __pfx_kthread+0x10/0x10
[ +0.000616] ret_from_fork+0x2d/0x50
[ +0.000612] ? __pfx_kthread+0x10/0x10
[ +0.000604] ret_from_fork_asm+0x1b/0x30
[ +0.000604] </TASK>
The previous way of handling this through returning -EBUSY is not viable,
particularly when destroying AF_XDP socket, because the kernel proceeds
with removal anyway.
There is plenty of code between those calls and there is no need to create
a large critical section that covers all of them, same as there is no need
to protect ice_vsi_rebuild() with rtnl_lock().
Add xdp_state_lock mutex to protect ice_vsi_rebuild() and ice_xdp().
Leaving unprotected sections in between would result in two states that
have to be considered:
1. when the VSI is closed, but not yet rebuild
2. when VSI is already rebuild, but not yet open
The latter case is actually already handled through !netif_running() case,
we just need to adjust flag checking a little. The former one is not as
trivial, because between ice_vsi_close() and ice_vsi_rebuild(), a lot of
hardware interaction happens, this can make adding/deleting rings exit
with an error. Luckily, VSI rebuild is pending and can apply new
configuration for us in a managed fashion.
Therefore, add an additional VSI state flag ICE_VSI_REBUILD_PENDING to
indicate that ice_xdp() can just hot-swap the program.
Also, as ice_vsi_rebuild() flow is touched in this patch, make it more
consistent by deconfiguring VSI when coalesce allocation fails.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Fixes: efc2214b60 ("ice: Add support for XDP")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Consider the following scenario:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\-------------\ \-------------\ \--------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 1 2 4
If Process 1 issue a new IO and bfqq2 is found, and then bfq_init_rq()
decide to spilt bfqq2 by bfq_split_bfqq(). Howerver, procress reference
of bfqq2 is 1 and bfq_split_bfqq() just clear the coop flag, which will
break the merge chain.
Expected result: caller will allocate a new bfqq for BIC1
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
| | |
\-------------\ \--------------\|
V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
ref 0 0 1 3
Since the condition is only used for the last bfqq4 when the previous
bfqq2 and bfqq3 are already splited. Fix the problem by checking if
bfqq is the last one in the merge chain as well.
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-4-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Consider the following merge chain:
Process 1 Process 2 Process 3 Process 4
(BIC1) (BIC2) (BIC3) (BIC4)
Λ | | |
\--------------\ \-------------\ \-------------\|
V V V
bfqq1--------->bfqq2---------->bfqq3----------->bfqq4
IO from Process 1 will get bfqf2 from BIC1 first, then
bfq_setup_cooperator() will found bfqq2 already merged to bfqq3 and then
handle this IO from bfqq3. However, the merge chain can be much deeper
and bfqq3 can be merged to other bfqq as well.
Fix this problem by iterating to the last bfqq in
bfq_setup_cooperator().
Fixes: 36eca89483 ("block, bfq: add Early Queue Merge (EQM)")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20240902130329.3787024-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently, netif_queue_set_napi() is called from ice_vsi_rebuild() that is
not rtnl-locked when called from the reset. This creates the need to take
the rtnl_lock just for a single function and complicates the
synchronization with .ndo_bpf. At the same time, there no actual need to
fill napi-to-queue information at this exact point.
Fill napi-to-queue information when opening the VSI and clear it when the
VSI is being closed. Those routines are already rtnl-locked.
Also, rewrite napi-to-queue assignment in a way that prevents inclusion of
XDP queues, as this leads to out-of-bounds writes, such as one below.
[ +0.000004] BUG: KASAN: slab-out-of-bounds in netif_queue_set_napi+0x1c2/0x1e0
[ +0.000012] Write of size 8 at addr ffff889881727c80 by task bash/7047
[ +0.000006] CPU: 24 PID: 7047 Comm: bash Not tainted 6.10.0-rc2+ #2
[ +0.000004] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0014.082620210524 08/26/2021
[ +0.000003] Call Trace:
[ +0.000003] <TASK>
[ +0.000002] dump_stack_lvl+0x60/0x80
[ +0.000007] print_report+0xce/0x630
[ +0.000007] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ +0.000007] ? __virt_addr_valid+0x1c9/0x2c0
[ +0.000005] ? netif_queue_set_napi+0x1c2/0x1e0
[ +0.000003] kasan_report+0xe9/0x120
[ +0.000004] ? netif_queue_set_napi+0x1c2/0x1e0
[ +0.000004] netif_queue_set_napi+0x1c2/0x1e0
[ +0.000005] ice_vsi_close+0x161/0x670 [ice]
[ +0.000114] ice_dis_vsi+0x22f/0x270 [ice]
[ +0.000095] ice_pf_dis_all_vsi.constprop.0+0xae/0x1c0 [ice]
[ +0.000086] ice_prepare_for_reset+0x299/0x750 [ice]
[ +0.000087] pci_dev_save_and_disable+0x82/0xd0
[ +0.000006] pci_reset_function+0x12d/0x230
[ +0.000004] reset_store+0xa0/0x100
[ +0.000006] ? __pfx_reset_store+0x10/0x10
[ +0.000002] ? __pfx_mutex_lock+0x10/0x10
[ +0.000004] ? __check_object_size+0x4c1/0x640
[ +0.000007] kernfs_fop_write_iter+0x30b/0x4a0
[ +0.000006] vfs_write+0x5d6/0xdf0
[ +0.000005] ? fd_install+0x180/0x350
[ +0.000005] ? __pfx_vfs_write+0x10/0xA10
[ +0.000004] ? do_fcntl+0x52c/0xcd0
[ +0.000004] ? kasan_save_track+0x13/0x60
[ +0.000003] ? kasan_save_free_info+0x37/0x60
[ +0.000006] ksys_write+0xfa/0x1d0
[ +0.000003] ? __pfx_ksys_write+0x10/0x10
[ +0.000002] ? __x64_sys_fcntl+0x121/0x180
[ +0.000004] ? _raw_spin_lock+0x87/0xe0
[ +0.000005] do_syscall_64+0x80/0x170
[ +0.000007] ? _raw_spin_lock+0x87/0xe0
[ +0.000004] ? __pfx__raw_spin_lock+0x10/0x10
[ +0.000003] ? file_close_fd_locked+0x167/0x230
[ +0.000005] ? syscall_exit_to_user_mode+0x7d/0x220
[ +0.000005] ? do_syscall_64+0x8c/0x170
[ +0.000004] ? do_syscall_64+0x8c/0x170
[ +0.000003] ? do_syscall_64+0x8c/0x170
[ +0.000003] ? fput+0x1a/0x2c0
[ +0.000004] ? filp_close+0x19/0x30
[ +0.000004] ? do_dup2+0x25a/0x4c0
[ +0.000004] ? __x64_sys_dup2+0x6e/0x2e0
[ +0.000002] ? syscall_exit_to_user_mode+0x7d/0x220
[ +0.000004] ? do_syscall_64+0x8c/0x170
[ +0.000003] ? __count_memcg_events+0x113/0x380
[ +0.000005] ? handle_mm_fault+0x136/0x820
[ +0.000005] ? do_user_addr_fault+0x444/0xa80
[ +0.000004] ? clear_bhb_loop+0x25/0x80
[ +0.000004] ? clear_bhb_loop+0x25/0x80
[ +0.000002] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ +0.000005] RIP: 0033:0x7f2033593154
Fixes: 080b0c8d6d ("ice: Fix ASSERT_RTNL() warning during certain scenarios")
Fixes: 91fdbce7e8 ("ice: Add support in the driver for associating queue with napi")
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit b9401c658d ("MAINTAINERS: add gameport.h, serio.h and uinput.h to
INPUT section") adds further header files in ./include/linux/ and
./include/uapi/linux to the INPUT section, but the file
./include/linux/uinput.h does not exist since commit a11bc476b9 ("Input:
uinput - fold header into the driver proper") removed this header file
in 2017.
Fortunately, ./scripts/get_maintainer.pl --self-test=patterns complains
about a broken reference. Remove the file entry referring to the
non-existing header file in the INPUT section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Link: https://lore.kernel.org/r/20240903093948.122957-1-lukas.bulwahn@redhat.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the `smk_set_cipso` function, the `skp->smk_netlabel.attr.mls.cat`
field is directly assigned to a new value without using the appropriate
RCU pointer assignment functions. According to RCU usage rules, this is
illegal and can lead to unpredictable behavior, including data
inconsistencies and impossible-to-diagnose memory corruption issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the assignment is now done using rcu_assign_pointer(),
which ensures that the pointer assignment is done safely, with the
necessary memory barriers and synchronization. This change prevents
potential RCU dereference issues by ensuring that the `cat` field is
safely updated while still adhering to RCU's requirements.
Fixes: 0817534ff9 ("smackfs: Fix use-after-free in netlbl_catmap_walk()")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>
In some situations 'perf script -F +brstackinsn' sees a lot of "not
reaching sample" messages.
This happens when the last LBR block before the sample contains a branch
that is not in the LBR, and the instruction dumping stops.
$ perf record -b emacs -Q --batch '()'
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.396 MB perf.data (443 samples) ]
$ perf script -F +brstackinsn
...
00007f0ab2d171a4 insn: 41 0f 94 c0
00007f0ab2d171a8 insn: 83 fa 01
00007f0ab2d171ab insn: 74 d3 # PRED 6 cycles [313] 1.00 IPC
00007f0ab2d17180 insn: 45 84 c0
00007f0ab2d17183 insn: 74 28
... not reaching sample ...
$ perf script -F +brstackinsn | grep -c reach
136
$
This is a problem for further analysis that wants to see the full code
upto the sample.
There are two common cases where the message is bogus:
- The LBR only logs taken branches, but the branch might be a
conditional branch that is not taken (that is the most common case
actually)
- The LBR sampling uses a filter ignoring some branches, but the perf
script check checks for all branches.
This patch fixes these two conditions, by only checking for conditional
branches, as well as checking the perf_event_attr's branch filter
attributes.
For the test case above it fixes all the messages:
$ ./perf script -F +brstackinsn | grep -c reach
0
Note that there are still conditions when the message is hit --
sometimes there can be a unconditional branch that misses the LBR update
before the sample -- but they are much more rare now.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240229161828.386397-1-ak@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Improve some debugging bits:
(1) The netfslib _debug() macro doesn't need a newline in its format
string.
(2) Display the request debug ID and subrequest index in messages emitted
in smb2_adjust_credits() to make it easier to reference in traces.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Port a number of SMB2/3 async readv/writev fixes to the SMB1 transport:
commit a88d609036
cifs: Don't advance the I/O iterator before terminating subrequest
commit ce5291e560
cifs: Defer read completion
commit 1da29f2c39
netfs, cifs: Fix handling of short DIO read
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
Reported-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Paulo Alcantara <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Fix cifs_fattr_to_inode() such that the ->zero_point tracking variable
is initialised when the inode is initialised.
Fixes: 3ee1a1fc39 ("cifs: Cut over to using netfslib")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
Signed-off-by: Steve French <stfrench@microsoft.com>
A recent change to gcc flags rv64iv as no longer valid:
cc1: sorry, unimplemented: Currently the 'V' implementation
requires the 'M' extension
and as a result vector support is disabled. Fix this by adding m
to our toolchain vector detection code.
Signed-off-by: Anton Blanchard <antonb@tenstorrent.com>
Fixes: fa8e7cce55 ("riscv: Enable Vector code to be built")
Link: https://lore.kernel.org/r/20240819001131.1738806-1-antonb@tenstorrent.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
To prevent unitialized members, use kzalloc to allocate
the xol area.
Fixes: b059a453b1 ("x86/vdso: Add mremap hook to vm_special_mapping")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20240903102313.3402529-1-svens@linux.ibm.com
The control knobs set before loading BPF programs should be declared as
'const volatile' so that it can be optimized by the BPF core.
Committer testing:
root@x1:~# perf kwork report --use-bpf
Starting trace, Hit <Ctrl+C> to stop and report
^C
Kwork Name | Cpu | Total Runtime | Count | Max runtime | Max runtime start | Max runtime end |
--------------------------------------------------------------------------------------------------------------------------------
(w)intel_atomic_commit_work [ | 0009 | 18.680 ms | 2 | 18.553 ms | 362410.681580 s | 362410.700133 s |
(w)pm_runtime_work | 0007 | 13.300 ms | 1 | 13.300 ms | 362410.254996 s | 362410.268295 s |
(w)intel_atomic_commit_work [ | 0009 | 9.846 ms | 2 | 9.717 ms | 362410.172352 s | 362410.182069 s |
(w)acpi_ec_event_processor | 0002 | 8.106 ms | 1 | 8.106 ms | 362410.463187 s | 362410.471293 s |
(s)SCHED:7 | 0000 | 1.351 ms | 106 | 0.063 ms | 362410.658017 s | 362410.658080 s |
i915:157 | 0008 | 0.994 ms | 13 | 0.361 ms | 362411.222125 s | 362411.222486 s |
(s)SCHED:7 | 0001 | 0.703 ms | 98 | 0.047 ms | 362410.245004 s | 362410.245051 s |
(s)SCHED:7 | 0005 | 0.674 ms | 42 | 0.074 ms | 362411.483039 s | 362411.483113 s |
(s)NET_RX:3 | 0001 | 0.556 ms | 10 | 0.079 ms | 362411.066388 s | 362411.066467 s |
<SNIP>
root@x1:~# perf trace -e bpf --max-events 5 perf kwork report --use-bpf
0.000 ( 0.016 ms): perf/2948007 bpf(cmd: 36, uattr: 0x7ffededa6660, size: 8) = -1 EOPNOTSUPP (Operation not supported)
0.026 ( 0.106 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6390, size: 148) = 12
0.152 ( 0.032 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6450, size: 148) = 12
26.247 ( 0.138 ms): perf/2948007 bpf(cmd: PROG_LOAD, uattr: 0x7ffededa6300, size: 148) = 12
26.396 ( 0.012 ms): perf/2948007 bpf(uattr: 0x7ffededa64b0, size: 80) = 12
Starting trace, Hit <Ctrl+C> to stop and report
root@x1:~#
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <song@kernel.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240902200515.2103769-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If smb2_set_path_attr() is called with a valid @cfile and returned
-EINVAL, we need to call cifs_get_writable_path() again as the
reference of @cfile was already dropped by previous smb2_compound_op()
call.
Fixes: 71f15c90e7 ("smb: client: retry compound request without reusing lease")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The definition of mdev_bus_register() and mdev_bus_unregister() have been
removed since commit 6c7f98b334 ("vfio/mdev: Remove vfio_mdev.c"). So,
let's remove the unused declarations.
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240812120823.10968-1-zhangzekun11@huawei.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
'vfio_pci_mmap_vma' has been unused since
commit aac6db75a9 ("vfio/pci: Use unmap_mapping_range()")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240727160307.1000476-1-linux@treblig.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
There's only one instance of the pcode per tile, and for GT-related
accesses both the primary and media GT share the same register
interface. Since Xe was using per-GT locking, the pcode mutex wasn't
actually protecting everything that it should since concurrent accesses
related to a tile's primary GT and media GT were possible.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829220619.789159-5-matthew.d.roper@intel.com
(cherry picked from commit 3034cc8107)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The GSC HW is only reset by driver FLR or D3cold entry. We don't support
the former at runtime, while the latter is only supported on DGFX, for
which we don't support GSC. Therefore, if GSC failed to load previously
there is no need to try again because the HW is stuck in the error state.
An assert has been added so that if we ever add DGFX support we'll know
we need to handle the D3 case.
v2: use "< 0" instead of "!= 0" in the FW state error check (Julia).
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-2-daniele.ceraolospurio@intel.com
(cherry picked from commit 2160f6f6e3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The original quirk should match to GA403U so that the full
range of GA403U models can benefit.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20240831003905.1060977-1-luke@ljones.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Replace strcpy() with strscpy() in the ACPI button driver.
strcpy() has been deprecated because it is generally unsafe, so help to
eliminate it from the kernel source.
Link: https://github.com/KSPP/linux/issues/88
Signed-off-by: Muhammad Qasim Abdul Majeed <qasim.majeed20@gmail.com>
Link: https://patch.msgid.link/20240901191826.421488-1-qasim.majeed20@gmail.com
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
i386 only supports watchpoints up to size 4, 8 bytes causes extra
counts and test failures.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The probe command is dependent on libelf. Skip the test if the
required probe command isn't present.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Like other Asus Vivobooks, the Asus Vivobook Go E1404GAB has a DSDT
that describes IRQ 1 as ActiveLow, while the kernel overrides to Edge_High.
This override prevents the internal keyboard from working.
Fix the problem by adding this laptop to the table that prevents the kernel
from overriding the IRQ.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219212
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Link: https://patch.msgid.link/20240903014317.38858-1-tamim@fusetak.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The "time utils" test fails in 32-bit builds:
...
parse_nsec_time("18446744073.709551615")
Failed. ptime 4294967295709551615 expected 18446744073709551615
...
Switch strtoul to strtoull as an unsigned long in 32-bit build isn't
64-bits.
Fixes: c284d669a2 ("perf tools: Move parse_nsec_time to time-utils.c")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-3-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The hex PMU suffix maybe 64-bit but the comparisons were "unsigned
long" or 32-bit on 32-bit systems. This was causing the "PMU name
comparison" test to fail in a 32-bit build.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Cc: Chaitanya S Prakash <chaitanyas.prakash@arm.com>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Dominique Martinet <asmadeus@codewreck.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yang Jihong <yangjihong@bytedance.com>
Link: https://lore.kernel.org/r/20240831070415.506194-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
