Since we have for_each_intel_pad_group() helper, there is
no advantage of having intel_gpio_community_irq_handler().
Inline it into intel_gpio_irq().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Support using LLVM as a disassembler method, allowing helperless
annotation in non-distro builds. (It is also much faster than
using libbfd or bfd objdump on binaries with a lot of debug
information.)
This is nearly identical to the output of llvm-objdump; there are
some very rare whitespace differences, some minor changes to demangling
(since we use perf's regular demangling and not LLVM's own) and
the occasional case where llvm-objdump makes a different choice
when multiple symbols share the same address.
It should work across all of LLVM's supported architectures, although
I've only tested 64-bit x86, and finding the right triple from perf's
idea of machine architecture can sometimes be a bit tricky. Ideally, we
should have some way of finding the triplet just from the file itself.
Committer notes:
Address this on 32-bit systems by using PRIu64 from inttypes.h
3 17.58 almalinux:9-i386 : FAIL gcc version 11.4.1 20231218 (Red Hat 11.4.1-3) (GCC)
util/llvm-c-helpers.cpp: In function ‘char* make_symbol_relative_string(dso*, const char*, u64, u64)’:
util/llvm-c-helpers.cpp:150:52: error: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 5 has type ‘u64’ {aka
+‘long long unsigned int’} [-Werror=format=]
150 | snprintf(buf, sizeof(buf), "%s+0x%lx",
| ~~^
| |
| long unsigned int
| %llx
151 | demangled ? demangled : sym_name, addr - base_addr);
| ~~~~~~~~~~~~~~~~
| |
| u64 {aka long long unsigned int}
cc1plus: all warnings being treated as errors
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240803152008.2818485-3-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Vadim Fedorenko says:
====================
ptp: ocp: fix serial port information export
Starting v6.8 the serial port subsystem changed the hierarchy of devices
and symlinks are not working anymore. Previous discussion made it clear
that the idea of symlinks for tty devices was wrong by design [1].
This series implements additional attributes to expose the information
and removes symlinks for tty devices.
[1] https://lore.kernel.org/netdev/2024060503-subsonic-pupil-bbee@gregkh/
v6 -> v7:
- fix issues with applying patches
v5 -> v6:
- split conversion to array to separate patch per Jiri's feedback
- move changelog to cover letter
v4 -> v5:
- remove unused variable in ptp_ocp_tty_show
v3 -> v4:
- re-organize info printing to use ptp_ocp_tty_port_name()
- keep uintptr_t to be consistent with other code
v2 -> v3:
- replace serial ports definitions with array and enum for index
- replace pointer math with direct array access
- nit in documentation spelling
v1 -> v2:
- add Documentation/ABI changes
====================
Link: https://patch.msgid.link/20240829183603.1156671-1-vadfed@meta.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update documentation according to the changes in the driver.
New attributes group tty is exposed and ttyGNSS, ttyGNSS2, ttyMAC and
ttyNMEA are moved to this group. Also, these attributes are no more
links to the devices but rather simple text files containing names of
tty devices.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement additional attribute group to expose serial port information.
Fixes tag points to the commit which introduced the change in serial
port subsystem and made it impossible to use symlinks.
Fixes: b286f4e87e ("serial: core: Move tty and serdev to be children of serial core port device")
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Simplify serial port management code by using array of ports and helpers
to get the name of the port. This change is needed to make the next
patch simplier.
Signed-off-by: Vadim Fedorenko <vadfed@meta.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce support for Airoha EN7581 PCIe controller to mediatek-gen3
PCIe controller driver.
Link: https://lore.kernel.org/linux-pci/aca00bd672ee576ad96d279414fc0835ff31f637.1720022580.git.lorenzo@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Use reset_bulk APIs to manage PHY reset lines.
This is a preliminary patch in order to add Airoha EN7581 PCIe support.
Link: https://lore.kernel.org/linux-pci/3ceb83bc0defbcf868521f8df4b9100e55ec2614.1720022580.git.lorenzo@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
Introduce mtk_gen3_pcie_pdata data structure in order to define
multiple callbacks for each supported SoC.
This is a preliminary patch to introduce EN7581 PCIe support.
Link: https://lore.kernel.org/linux-pci/c193d1a87505d045e2e0ef33317bce17012ee095.1720022580.git.lorenzo@kernel.org
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Tested-by: Zhengping Zhang <zhengping.zhang@airoha.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Jianjun Wang <jianjun.wang@mediatek.com>
In order to tell the previous sched_class what the next task is, add
put_prev_task(.next).
Notable SCX will use this to:
1) determine the next task will leave the SCX sched class and push
the current task to another CPU if possible.
2) statistics on how often and which other classes preempt it
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.367421076@infradead.org
When a task is selected through a dl_server, it will have p->dl_server
set, such that it can account runtime to the dl_server, see
update_curr_task().
Currently p->dl_server is set in pick*task() whenever it goes through
the dl_server, clearing it is a bit of a mess though. The trivial
solution is clearing it on the final put (now that we have this
location).
However, this gives a problem when:
p = pick_task(rq);
if (p)
put_prev_set_next_task(rq, prev, next);
picks the same task but through a different path, notably when it goes
from picking through the dl_server to a direct pick or vice-versa. In
that case we cannot readily determine wether we should clear or
preserve p->dl_server.
An additional complication is pick_*task() setting p->dl_server for a
remote pick, it might still need to update runtime before it schedules
the core_pick.
Close all these holes and remove all the random clearing of
p->dl_server by:
- having pick_*task() manage rq->dl_server
- having the final put_prev_task() clear p->dl_server
- having the first set_next_task() set p->dl_server = rq->dl_server
- complicate the core_sched code to save/restore rq->dl_server where
appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.259853414@infradead.org
The current rule is that:
pick_next_task() := pick_task() + set_next_task(.first = true)
And many classes implement it directly as such. Change things around
to make pick_next_task() optional while also changing the definition to:
pick_next_task(prev) := pick_task() + put_prev_task() + set_next_task(.first = true)
The reason is that sched_ext would like to have a 'final' call that
knows the next task. By placing put_prev_task() right next to
set_next_task() (as it already is for sched_core) this becomes
trivial.
As a bonus, this is a nice cleanup on its own.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.051225657@infradead.org
Abide by the simple rule:
pick_next_task() := pick_task() + set_next_task(.first = true)
This allows us to trivially get rid of server_pick_next() and things
collapse nicely.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224015.837303391@infradead.org
The rule is that:
pick_next_task() := pick_task() + set_next_task(.first = true)
Turns out, there's still a few things in pick_next_task() that are
missing from that combination.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224015.724111109@infradead.org
Turns out the core_sched bits forgot to use the
set_next_task(.first=true) variant. Notably:
pick_next_task() := pick_task() + set_next_task(.first = true)
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224015.614146342@infradead.org
__sched_setscheduler() goes through an enqueue/dequeue cycle like so:
flags := DEQUEUE_SAVE | DEQUEUE_MOVE | DEQUEUE_NOCLOCK;
prev_class->dequeue_task(rq, p, flags);
new_class->enqueue_task(rq, p, flags);
when prev_class := fair_sched_class, this is followed by:
dequeue_task(rq, p, DEQUEUE_NOCLOCK | DEQUEUE_SLEEP);
the idea being that since the task has switched classes, we need to drop
the sched_delayed logic and have that task be deactivated per its previous
dequeue_task(..., DEQUEUE_SLEEP).
Unfortunately, this leaves the task on_rq. This is missing the tail end of
dequeue_entities() that issues __block_task(), which __sched_setscheduler()
won't have done due to not using DEQUEUE_DELAYED - not that it should, as
it is pretty much a fair_sched_class specific thing.
Make switched_from_fair() properly deactivate sched_delayed tasks upon
class changes via __block_task(), as if a
dequeue_task(..., DEQUEUE_DELAYED)
had been issued.
Fixes: 2e0199df25 ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240829135353.1524260-1-vschneid@redhat.com
In dl_server_start(), when schedstats is enabled, the following
happens:
dl_server_start()
dl_se->dl_server = 1;
enqueue_dl_entity()
update_stats_enqueue_dl()
__schedstats_from_dl_se()
dl_task_of()
BUG_ON(dl_server(dl_se));
Since only tasks have schedstats and internal entries do not, avoid
trying to update stats in this case.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20240829031111.12142-1-shijie@os.amperecomputing.com
The Capstone disassembler code has a useful code snippet to read the
bytes for a given code symbol into memory. Split it out into its own
function, so that the LLVM disassembler can use it in the next patch.
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240803152008.2818485-2-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to the existing support for libbfd and calling out to
an external addr2line command, add support for using libllvm directly.
This is both faster than libbfd, and can be enabled in distro builds
(the LLVM license has an explicit provision for GPLv2 compatibility).
Thus, it is set as the primary choice if available.
As an example, running 'perf report' on a medium-size profile with
DWARF-based backtraces took 58 seconds with LLVM, 78 seconds with
libbfd, 153 seconds with external llvm-addr2line, and I got tired and
aborted the test after waiting for 55 minutes with external bfd
addr2line (which is the default for perf as compiled by distributions
today).
Evidently, for this case, the bfd addr2line process needs 18 seconds (on
a 5.2 GHz Zen 3) to load the .debug ELF in question, hits the 1-second
timeout and gets killed during initialization, getting restarted anew
every time. Having an in-process addr2line makes this much more robust.
As future extensions, libllvm can be used in many other places where
we currently use libbfd or other libraries:
- Symbol enumeration (in particular, for PE binaries).
- Demangling (including non-Itanium demangling, e.g. Microsoft
or Rust).
- Disassembling (perf annotate).
However, these are much less pressing; most people don't profile PE
binaries, and perf has non-bfd paths for ELF. The same with demangling;
the default _cxa_demangle path works fine for most users, and while bfd
objdump can be slow on large binaries, it is possible to use
--objdump=llvm-objdump to get the speed benefits. (It appears
LLVM-based demangling is very simple, should we want that.)
Tested with LLVM 14, 15, 16, 18 and 19. For some reason, LLVM 12 was not
correctly detected using feature_check, and thus was not tested.
Committer notes:
Added the name and a __maybe_unused to address:
1 13.50 almalinux:8 : FAIL gcc version 8.5.0 20210514 (Red Hat 8.5.0-22) (GCC)
util/srcline.c: In function 'dso__free_a2l':
util/srcline.c:184:20: error: parameter name omitted
void dso__free_a2l(struct dso *)
^~~~~~~~~~~~
make[3]: *** [/git/perf-6.11.0-rc3/tools/build/Makefile.build:158: util] Error 2
Signed-off-by: Steinar H. Gunderson <sesse@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20240803152008.2818485-1-sesse@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the of_device_id entry for "elgin,jg10309-01" was added, the
corresponding spi_device_id was forgotten, causing a warning message
during boot-up:
SPI driver spidev has no spi_device_id for elgin,jg10309-01
Fix module autoloading and shut up the warning by adding the missing
entry.
Fixes: 5f3eee1eef ("spi: spidev: Add an entry for elgin,jg10309-01")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/54bbb9d8a8db7e52d13e266f2d4a9bcd8b42a98a.1725366625.git.geert+renesas@glider.be
Signed-off-by: Mark Brown <broonie@kernel.org>
Stephen reported that there is a kernel build warning due to a missing
description of a parameter in mapping_align_index().
Add the missing index parameter in the comment description.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240827084206.106347-2-kernel@pankajraghav.com
Fixes: ab95d23bab ("filemap: allocate mapping_min_order folios in the page cache")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Christian Brauner <brauner@kernel.org>
iomap_zero_range() flushes pagecache to mitigate consistency
problems with dirty pagecache and unwritten mappings. The flush is
unconditional over the entire range because checking pagecache state
after mapping lookup is racy with writeback and reclaim. There are
ways around this using iomap's mapping revalidation mechanism, but
this is not supported by all iomap based filesystems and so is not a
generic solution.
There is another way around this limitation that is good enough to
filter the flush for most cases in practice. If we check for dirty
pagecache over the target range (instead of unconditionally flush),
we can keep track of whether the range was dirty before lookup and
defer the flush until/unless we see a combination of dirty cache
backed by an unwritten mapping. We don't necessarily know whether
the dirty cache was backed by the unwritten maping or some other
(written) part of the range, but the impliciation of a false
positive here is a spurious flush and thus relatively harmless.
Note that we also flush for hole mappings because iomap_zero_range()
is used for partial folio zeroing in some cases. For example, if a
folio straddles EOF on a sub-page FSB size fs, the post-eof portion
is hole-backed and dirtied/written via mapped write, and then i_size
increases before writeback can occur (which otherwise zeroes the
post-eof portion of the EOF folio), then the folio becomes
inconsistent with disk until reclaimed. A flush in this case
executes partial zeroing from writeback, and iomap knows that there
is otherwise no I/O to submit for hole backed mappings.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20240830145634.138439-3-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
The iomap zero range implementation doesn't properly handle dirty
pagecache over unwritten mappings. It skips such mappings as if they
were pre-zeroed. If some part of an unwritten mapping is dirty in
pagecache from a previous write, the data in cache should be zeroed
as well. Instead, the data is left in cache and creates a stale data
exposure problem if writeback occurs sometime after the zero range.
Most callers are unaffected by this because the higher level
filesystem contexts that call zero range typically perform a filemap
flush of the target range for other reasons. A couple contexts that
don't otherwise need to flush are write file size extension and
truncate in XFS. The former path is currently susceptible to the
stale data exposure problem and the latter performs a flush
specifically to work around it.
This is clearly inconsistent and incomplete. As a first step toward
correcting behavior, lift the XFS workaround to iomap_zero_range()
and unconditionally flush the range before the zero range operation
proceeds. While this appears to be a bit of a big hammer, most all
users already do this from calling context save for the couple of
exceptions noted above. Future patches will optimize or elide this
flush while maintaining functional correctness.
Fixes: ae259a9c85 ("fs: introduce iomap infrastructure")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Link: https://lore.kernel.org/r/20240830145634.138439-2-bfoster@redhat.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
In order to switch fuse over to using iomap for buffered writes we need
to be able to have the struct file for the original write, in case we
have to read in the page to make it uptodate. Handle this by using the
existing private field in the iomap_iter, and add the argument to
iomap_file_buffered_write. This will allow us to pass the file in
through the iomap buffered write path, and is flexible for any other
file systems needs.
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Link: https://lore.kernel.org/r/7f55c7c32275004ba00cddf862d970e6e633f750.1724755651.git.josef@toxicpanda.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Pankaj Raghav (Samsung) <kernel@pankajraghav.com> says:
This is the 13th version of the series that enables block size > page size
(Large Block Size) experimental support in XFS. Please consider this for
the inclusion in 6.12.
The context and motivation can be seen in cover letter of the RFC v1 [0].
We also recorded a talk about this effort at LPC [1], if someone would
like more context on this effort.
Thanks to David Howells, the page cache changes have also been tested on
top of AFS[2] with mapping_min_order set.
A lot of emphasis has been put on testing using kdevops, starting with an XFS
baseline [3]. The testing has been split into regression and progression.
Regression testing:
In regression testing, we ran the whole test suite to check for regressions on
existing profiles due to the page cache changes.
I also ran split_huge_page_test selftest on XFS filesystem to check for
huge page splits in min order chunks is done correctly.
No regressions were found with these patches added on top.
Progression testing:
For progression testing, we tested for 8k, 16k, 32k and 64k block sizes. To
compare it with existing support, an ARM VM with 64k base page system (without
our patches) was used as a reference to check for actual failures due to LBS
support in a 4k base page size system.
No new failures were found with the LBS support.
We've done some preliminary performance tests with fio on XFS on 4k block size
against pmem and NVMe with buffered IO and Direct IO on vanilla Vs + these
patches applied, and detected no regressions.
We ran sysbench on postgres and mysql for several hours on LBS XFS
without any issues.
We also wrote an eBPF tool called blkalgn [5] to see if IO sent to the device
is aligned and at least filesystem block size in length.
For those who want this in a git tree we have this up on a kdevops
large-block-minorder-for-next-v13 tag [6].
[0] https://lore.kernel.org/lkml/20230915183848.1018717-1-kernel@pankajraghav.com/
[1] https://www.youtube.com/watch?v=ar72r5Xf7x4
[2] https://lore.kernel.org/linux-mm/3792765.1724196264@warthog.procyon.org.uk/
[3] https://github.com/linux-kdevops/kdevops/blob/master/docs/xfs-bugs.md
489 non-critical issues and 55 critical issues. We've determined and reported
that the 55 critical issues have all fall into 5 common XFS asserts or hung
tasks and 2 memory management asserts.
[4] https://github.com/linux-kdevops/fstests/tree/lbs-fixes
[5] https://github.com/iovisor/bcc/pull/4813
[6] https://github.com/linux-kdevops/linux/
[7] https://lore.kernel.org/linux-kernel/Zl20pc-YlIWCSy6Z@casper.infradead.org/#t
* patches from https://lore.kernel.org/r/20240822135018.1931258-1-kernel@pankajraghav.com: (5979 commits)
xfs: enable block size larger than page size support
xfs: make the calculation generic in xfs_sb_validate_fsb_count()
xfs: expose block size in stat
xfs: use kvmalloc for xattr buffers
iomap: fix iomap_dio_zero() for fs bs > system page size
filemap: cap PTE range to be created to allowed zero fill in folio_map_range()
mm: split a folio in minimum folio order chunks
readahead: allocate folios with mapping_min_order in readahead
filemap: allocate mapping_min_order folios in the page cache
fs: Allow fine-grained control of folio sizes
Add linux-next specific files for 20240821
l2tp: use skb_queue_purge in l2tp_ip_destroy_sock
af_unix: Don't call skb_get() for OOB skb.
dt-bindings: net: socionext,uniphier-ave4: add top-level constraints
dt-bindings: net: renesas,etheravb: add top-level constraints
dt-bindings: net: mediatek,net: add top-level constraints
dt-bindings: net: mediatek,net: narrow interrupts per variants
net: Silence false field-spanning write warning in metadata_dst memcpy
net: hns3: Use ARRAY_SIZE() to improve readability
selftests: net/forwarding: spawn sh inside vrf to speed up ping loop
...
Link: https://lore.kernel.org/r/20240822135018.1931258-1-kernel@pankajraghav.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Prevent build error when CONFIG_RPMB=m and CONFIG_OPTEE=y by adding a
dependency to CONFIG_RPMB for CONFIG_OPTEE so the RPMB subsystem always
is reachable if configured. This means that CONFIG_OPTEE automatically
becomes compiled as a module if CONFIG_RPMB is compiled as a module. If
CONFIG_RPMB isn't configured or is configured as built-in, CONFIG_OPTEE
will remain unchanged.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409021448.RSvcBPzt-lkp@intel.com/
Fixes: f0c8431568 ("optee: probe RPMB device using RPMB subsystem")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/20240902151231.3705204-2-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Prevent build error when CONFIG_RPMB=m and CONFIG_MMC_BLOCK=y by adding
a dependency to CONFIG_RPMB for CONFIG_MMC_BLOCK block so the RPMB
subsystem always is reachable if configured. This means that
CONFIG_MMC_BLOCK automatically becomes compiled as a module if
CONFIG_RPMB is compiled as a module. If CONFIG_RPMB isn't configured or
is configured as built-in, CONFIG_MMC_BLOCK will remain unchanged.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202409021448.RSvcBPzt-lkp@intel.com/
Fixes: 7852028a35 ("mmc: block: register RPMB partition with the RPMB subsystem")
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240902151231.3705204-1-jens.wiklander@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The UNSTUFF_BITS macro, which is defined in both drivers/mmc/core/mmc.c
and drivers/mmc/core/sd.c, has been converted to an inline function to
improve readability, maintainability, and type safety.
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Link: https://lore.kernel.org/r/20240902123331.3566447-1-avri.altman@wdc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert sdhci-atmel documentation to yaml format. The new file will inherit
from sdhci-common.yaml.
Note: Add microchip,sama7g5-sdhci to compatible list as we already use it
in the DT.
Signed-off-by: Dharma Balasubiramani <dharma.b@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240902-atmel-sdhci-v4-1-96912fab6b2d@microchip.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
simple_strtoul() is obsolete and lacks proper error handling, making it
unsafe for converting strings to unsigned long values. Replace it with
kstrtoul(), which provides robust error checking and better safety.
This change improves the reliability of the string-to-integer conversion
and aligns with current kernel coding standards. Error handling is added
to catch conversion failures, returning -EINVAL when input is invalid.
Issue reported by checkpatch:
- WARNING: simple_strtoul is obsolete, use kstrtoul instead
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Link: https://lore.kernel.org/r/20240901182244.45543-1-riyandhiman14@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Calculate the size from pointer instead of
struct to adhere to linux kernel coding style.
Issue reported by checkpatch.
This commit has no functional changes.
Signed-off-by: Riyan Dhiman <riyandhiman14@gmail.com>
Link: https://lore.kernel.org/r/20240901173309.7124-1-riyandhiman14@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Make use of cqhci_halted() in couple places to avoid open-coding.
Signed-off-by: Seunghwan Baek <sh8267.baek@samsung.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240829061823.3718-3-sh8267.baek@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.11-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.12.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To check if mmc cqe is in halt state, need to check set/clear of CQHCI_HALT
bit. At this time, we need to check with &, not &&.
Fixes: a4080225f5 ("mmc: cqhci: support for command queue enabled host")
Cc: stable@vger.kernel.org
Signed-off-by: Seunghwan Baek <sh8267.baek@samsung.com>
Reviewed-by: Ritesh Harjani <ritesh.list@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20240829061823.3718-2-sh8267.baek@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Replace with already defined values for readability. While at it, let's
also change the mode-parameter from an int to bool, as the only used values
are 0 or 1.
Signed-off-by: Chanwoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20240829024709.402285-1-cw9316.lee@samsung.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On rk3576 the tunable clocks are inside the controller itself, removing
the need for the "ciu-drive" and "ciu-sample" clocks.
That makes it a new type of controller that has its own dt_parse function.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/010201919997044d-c3a008d1-afbc-462f-a928-fc1ece785bdb-000000@eu-west-1.amazonses.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some Rockchip devices put the phase settings into the dw_mmc controller.
When the feature is present, the ciu-drive and ciu-sample clocks are
not used and the phase configuration is done directly through the mmc
controller.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/010201919996fdae-8a9f843e-00a8-4131-98bf-a9da4ed04bfd-000000@eu-west-1.amazonses.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add the compatible string for rockchip,rk3576-dw-mshc in its own new
block, for devices that have internal phase settings instead of external
clocks.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/010201919996f687-08c1988a-f588-46fa-ad82-023068c316ba-000000@eu-west-1.amazonses.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Replace a comma between expression statements by a semicolon.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The patch is to add proper quirks for sis multitouch format
Signed-off-by: tammy tseng <tammy0524@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add page table entry configurations to support higher sample rate
streams with multiple channels for ACP7.0 platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://patch.msgid.link/20240903113427.182997-11-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
