When the clocksource watchdog marks a clock as unstable, this might
be due to that clock being unstable or it might be due to delays that
happen to occur between the reads of the two clocks. It would be good
to have a way of testing the clocksource watchdog's ability to
distinguish between these two causes of clock skew and instability.
Therefore, provide a new clocksource-wdtest module selected by a new
TEST_CLOCKSOURCE_WATCHDOG Kconfig option. This module has a single module
parameter named "holdoff" that provides the number of seconds of delay
before testing should start, which defaults to zero when built as a module
and to 10 seconds when built directly into the kernel. Very large systems
that boot slowly may need to increase the value of this module parameter.
This module uses hand-crafted clocksource structures to do its testing,
thus avoiding messing up timing for the rest of the kernel and for user
applications. This module first verifies that the ->uncertainty_margin
field of the clocksource structures are set sanely. It then tests the
delay-detection capability of the clocksource watchdog, increasing the
number of consecutive delays injected, first provoking console messages
complaining about the delays and finally forcing a clock-skew event.
Unexpected test results cause at least one WARN_ON_ONCE() console splat.
If there are no splats, the test has passed. Finally, it fuzzes the
value returned from a clocksource to test the clocksource watchdog's
ability to detect time skew.
This module checks the state of its clocksource after each test, and
uses WARN_ON_ONCE() to emit a console splat if there are any failures.
This should enable all types of test frameworks to detect any such
failures.
This facility is intended for diagnostic use only, and should be avoided
on production systems.
Reported-by: Chris Mason <clm@fb.com>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-5-paulmck@kernel.org
Currently, WATCHDOG_THRESHOLD is set to detect a 62.5-millisecond skew in
a 500-millisecond WATCHDOG_INTERVAL. This requires that clocks be skewed
by more than 12.5% in order to be marked unstable. Except that a clock
that is skewed by that much is probably destroying unsuspecting software
right and left. And given that there are now checks for false-positive
skews due to delays between reading the two clocks, it should be possible
to greatly decrease WATCHDOG_THRESHOLD, at least for fine-grained clocks
such as TSC.
Therefore, add a new uncertainty_margin field to the clocksource structure
that contains the maximum uncertainty in nanoseconds for the corresponding
clock. This field may be initialized manually, as it is for
clocksource_tsc_early and clocksource_jiffies, which is copied to
refined_jiffies. If the field is not initialized manually, it will be
computed at clock-registry time as the period of the clock in question
based on the scale and freq parameters to __clocksource_update_freq_scale()
function. If either of those two parameters are zero, the
tens-of-milliseconds WATCHDOG_THRESHOLD is used as a cowardly alternative
to dividing by zero. No matter how the uncertainty_margin field is
calculated, it is bounded below by twice WATCHDOG_MAX_SKEW, that is, by 100
microseconds.
Note that manually initialized uncertainty_margin fields are not adjusted,
but there is a WARN_ON_ONCE() that triggers if any such field is less than
twice WATCHDOG_MAX_SKEW. This WARN_ON_ONCE() is intended to discourage
production use of the one-nanosecond uncertainty_margin values that are
used to test the clock-skew code itself.
The actual clock-skew check uses the sum of the uncertainty_margin fields
of the two clocksource structures being compared. Integer overflow is
avoided because the largest computed value of the uncertainty_margin
fields is one billion (10^9), and double that value fits into an
unsigned int. However, if someone manually specifies (say) UINT_MAX,
they will get what they deserve.
Note that the refined_jiffies uncertainty_margin field is initialized to
TICK_NSEC, which means that skew checks involving this clocksource will
be sufficently forgiving. In a similar vein, the clocksource_tsc_early
uncertainty_margin field is initialized to 32*NSEC_PER_MSEC, which
replicates the current behavior and allows custom setting if needed
in order to address the rare skews detected for this clocksource in
current mainline.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-4-paulmck@kernel.org
Currently, if skew is detected on a clock marked CLOCK_SOURCE_VERIFY_PERCPU,
that clock is checked on all CPUs. This is thorough, but might not be
what you want on a system with a few tens of CPUs, let alone a few hundred
of them.
Therefore, by default check only up to eight randomly chosen CPUs. Also
provide a new clocksource.verify_n_cpus kernel boot parameter. A value of
-1 says to check all of the CPUs, and a non-negative value says to randomly
select that number of CPUs, without concern about selecting the same CPU
multiple times. However, make use of a cpumask so that a given CPU will be
checked at most once.
Suggested-by: Thomas Gleixner <tglx@linutronix.de> # For verify_n_cpus=1.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-3-paulmck@kernel.org
Some sorts of per-CPU clock sources have a history of going out of
synchronization with each other. However, this problem has purportedy been
solved in the past ten years. Except that it is all too possible that the
problem has instead simply been made less likely, which might mean that
some of the occasional "Marking clocksource 'tsc' as unstable" messages
might be due to desynchronization. How would anyone know?
Therefore apply CPU-to-CPU synchronization checking to newly unstable
clocksource that are marked with the new CLOCK_SOURCE_VERIFY_PERCPU flag.
Lists of desynchronized CPUs are printed, with the caveat that if it
is the reporting CPU that is itself desynchronized, it will appear that
all the other clocks are wrong. Just like in real life.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-2-paulmck@kernel.org
When the clocksource watchdog marks a clock as unstable, this might be due
to that clock being unstable or it might be due to delays that happen to
occur between the reads of the two clocks. Yes, interrupts are disabled
across those two reads, but there are no shortage of things that can delay
interrupts-disabled regions of code ranging from SMI handlers to vCPU
preemption. It would be good to have some indication as to why the clock
was marked unstable.
Therefore, re-read the watchdog clock on either side of the read from the
clock under test. If the watchdog clock shows an excessive time delta
between its pair of reads, the reads are retried.
The maximum number of retries is specified by a new kernel boot parameter
clocksource.max_cswd_read_retries, which defaults to three, that is, up to
four reads, one initial and up to three retries. If more than one retry
was required, a message is printed on the console (the occasional single
retry is expected behavior, especially in guest OSes). If the maximum
number of retries is exceeded, the clock under test will be marked
unstable. However, the probability of this happening due to various sorts
of delays is quite small. In addition, the reason (clock-read delays) for
the unstable marking will be apparent.
Reported-by: Chris Mason <clm@fb.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Feng Tang <feng.tang@intel.com>
Link: https://lore.kernel.org/r/20210527190124.440372-1-paulmck@kernel.org
If there is no matched result, check_redundant() will return BFS_RNOMATCH.
Signed-off-by: Xiongwei Song <sxwjean@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lkml.kernel.org/r/20210618130230.123249-1-sxwjean@me.com
The FUTEX_LOCK_PI futex operand uses a CLOCK_REALTIME based absolute
timeout since it was implemented, but it does not require that the
FUTEX_CLOCK_REALTIME flag is set, because that was introduced later.
In theory as none of the user space implementations can set the
FUTEX_CLOCK_REALTIME flag on this operand, it would be possible to
creatively abuse it and make the meaning invers, i.e. select CLOCK_REALTIME
when not set and CLOCK_MONOTONIC when set. But that's a nasty hackery.
Another option would be to have a new FUTEX_CLOCK_MONOTONIC flag only for
FUTEX_LOCK_PI, but that's also awkward because it does not allow libraries
to handle the timeout clock selection consistently.
So provide a new FUTEX_LOCK_PI2 operand which implements the timeout
semantics which the other operands use and leave FUTEX_LOCK_PI alone.
Reported-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210422194705.440773992@linutronix.de
futex_lock_pi() is the only futex operation which cannot select the clock
for timeouts (CLOCK_MONOTONIC/CLOCK_REALTIME). That's inconsistent and
there is no particular reason why this cannot be supported.
This was overlooked when CLOCK_REALTIME_FLAG was introduced and
unfortunately not reported when the inconsistency was discovered in glibc.
Prepare the function and enforce the CLOCK_REALTIME_FLAG on FUTEX_LOCK_PI
so that a new FUTEX_LOCK_PI2 can implement it correctly.
Reported-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210422194705.338657741@linutronix.de
The problem is that rcu_callback_map doesn't have wait_types defined,
and doing so would make it indistinguishable from SOFTIRQ in any case.
Remove it.
Fixes: 9271a40d2a ("lockdep/selftest: Add wait context selftests")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210617190313.384290291@infradead.org
When PROVE_RAW_LOCK_NESTING=y many of the selftests FAILED because
HARDIRQ context is out-of-bounds for spinlocks. Instead make the
default hardware context the threaded hardirq context, which preserves
the old locking rules.
The wait-type specific locking selftests will have a non-threaded
HARDIRQ variant.
Fixes: de8f5e4f2d ("lockdep: Introduce wait-type checks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210617190313.322096283@infradead.org
Even the very first lock can violate the wait-context check, consider
the various IRQ contexts.
Fixes: de8f5e4f2d ("lockdep: Introduce wait-type checks")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20210617190313.256987481@infradead.org
Johannes Berg reported a lockdep problem which could be reproduced by
the special test case introduced in this patch, so add it.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-5-boqun.feng@gmail.com
In the step #3 of check_irq_usage(), we seach backwards to find a lock
whose usage conflicts the usage of @target_entry1 on safe/unsafe.
However, we should only keep the irq-unsafe usage of @target_entry1 into
consideration, because it could be a case where a lock is hardirq-unsafe
but soft-safe, and in check_irq_usage() we find it because its
hardirq-unsafe could result into a hardirq-safe-unsafe deadlock, but
currently since we don't filter out the other usage bits, so we may find
a lock dependency path softirq-unsafe -> softirq-safe, which in fact
doesn't cause a deadlock. And this may cause misleading lockdep splats.
Fix this by only keeping LOCKF_ENABLED_IRQ_ALL bits when we try the
backwards search.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-4-boqun.feng@gmail.com
In print_bad_irq_dependency(), save_trace() is called to set the ->trace
for @prev_root as the current call trace, however @prev_root corresponds
to the the held lock, which may not be acquired in current call trace,
therefore it's wrong to use save_trace() to set ->trace of @prev_root.
Moreover, with our adjustment of printing backwards dependency path, the
->trace of @prev_root is unncessary, so remove it.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-3-boqun.feng@gmail.com
We use the same code to print backwards lock dependency path as the
forwards lock dependency path, and this could result into incorrect
printing because for a backwards lock_list ->trace is not the call trace
where the lock of ->class is acquired.
Fix this by introducing a separate function on printing the backwards
dependency path. Also add a few comments about the printing while we are
at it.
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210618170110.3699115-2-boqun.feng@gmail.com
Now cpu.uclamp.min acts as a protection, we need to make sure that the
uclamp request of the task is within the allowed range of the cgroup,
that is it is clamp()'ed correctly by tg->uclamp[UCLAMP_MIN] and
tg->uclamp[UCLAMP_MAX].
As reported by Xuewen [1] we can have some corner cases where there's
inversion between uclamp requested by task (p) and the uclamp values of
the taskgroup it's attached to (tg). Following table demonstrates
2 corner cases:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 60%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 20%
-----------+-----+------+-----------
With this fix we get:
| p | tg | effective
-----------+-----+------+-----------
CASE 1
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
CASE 2
-----------+-----+------+-----------
uclamp_min | 0% | 30% | 30%
-----------+-----+------+-----------
uclamp_max | 20% | 50% | 30%
-----------+-----+------+-----------
Additionally uclamp_update_active_tasks() must now unconditionally
update both UCLAMP_MIN/MAX because changing the tg's UCLAMP_MAX for
instance could have an impact on the effective UCLAMP_MIN of the tasks.
| p | tg | effective
-----------+-----+------+-----------
old
-----------+-----+------+-----------
uclamp_min | 60% | 0% | 50%
-----------+-----+------+-----------
uclamp_max | 80% | 50% | 50%
-----------+-----+------+-----------
*new*
-----------+-----+------+-----------
uclamp_min | 60% | 0% | *60%*
-----------+-----+------+-----------
uclamp_max | 80% |*70%* | *70%*
-----------+-----+------+-----------
[1] https://lore.kernel.org/lkml/CAB8ipk_a6VFNjiEnHRHkUMBKbA+qzPQvhtNjJ_YNzQhqV_o8Zw@mail.gmail.com/
Fixes: 0c18f2ecfc ("sched/uclamp: Fix wrong implementation of cpu.uclamp.min")
Reported-by: Xuewen Yan <xuewen.yan94@gmail.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210617165155.3774110-1-qais.yousef@arm.com
DL keeps track of the utilization on a per-rq basis with the structure
avg_dl. This utilization is updated during task_tick_dl(),
put_prev_task_dl() and set_next_task_dl(). However, when the current
running task changes its policy, set_next_task_dl() which would usually
take care of updating the utilization when the rq starts running DL
tasks, will not see a such change, leaving the avg_dl structure outdated.
When that very same task will be dequeued later, put_prev_task_dl() will
then update the utilization, based on a wrong last_update_time, leading to
a huge spike in the DL utilization signal.
The signal would eventually recover from this issue after few ms. Even
if no DL tasks are run, avg_dl is also updated in
__update_blocked_others(). But as the CPU capacity depends partly on the
avg_dl, this issue has nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to DL.
Fixes: 3727e0e ("sched/dl: Add dl_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-3-git-send-email-vincent.donnefort@arm.com
RT keeps track of the utilization on a per-rq basis with the structure
avg_rt. This utilization is updated during task_tick_rt(),
put_prev_task_rt() and set_next_task_rt(). However, when the current
running task changes its policy, set_next_task_rt() which would usually
take care of updating the utilization when the rq starts running RT tasks,
will not see a such change, leaving the avg_rt structure outdated. When
that very same task will be dequeued later, put_prev_task_rt() will then
update the utilization, based on a wrong last_update_time, leading to a
huge spike in the RT utilization signal.
The signal would eventually recover from this issue after few ms. Even if
no RT tasks are run, avg_rt is also updated in __update_blocked_others().
But as the CPU capacity depends partly on the avg_rt, this issue has
nonetheless a significant impact on the scheduler.
Fix this issue by ensuring a load update when a running task changes
its policy to RT.
Fixes: 371bf427 ("sched/rt: Add rt_rq utilization tracking")
Signed-off-by: Vincent Donnefort <vincent.donnefort@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/1624271872-211872-2-git-send-email-vincent.donnefort@arm.com
LLVM does not emit optimal byteswap assembly, which results in high
stack usage in kvmhv_enter_nested_guest() due to the inlining of
byteswap_pt_regs(). With LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:289:6: error: stack frame size of
2512 bytes in function 'kvmhv_enter_nested_guest' [-Werror,-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 error generated.
While this gets fixed in LLVM, mark byteswap_pt_regs() as
noinline_for_stack so that it does not get inlined and break the build
due to -Werror by default in arch/powerpc/. Not inlining saves
approximately 800 bytes with LLVM 12.0.0:
arch/powerpc/kvm/book3s_hv_nested.c:290:6: warning: stack frame size of
1728 bytes in function 'kvmhv_enter_nested_guest' [-Wframe-larger-than=]
long kvmhv_enter_nested_guest(struct kvm_vcpu *vcpu)
^
1 warning generated.
Cc: stable@vger.kernel.org # v4.20+
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://github.com/ClangBuiltLinux/linux/issues/1292
Link: https://bugs.llvm.org/show_bug.cgi?id=49610
Link: https://lore.kernel.org/r/202104031853.vDT0Qjqj-lkp@intel.com/
Link: https://gist.github.com/ba710e3703bf45043a31e2806c843ffd
Link: https://lore.kernel.org/r/20210621182440.990242-1-nathan@kernel.org
The function hda_tegra_first_init() neglects to check the return
value after executing platform_get_irq().
hda_tegra_first_init() should check the return value (if negative
error number) for errors so as to not pass a negative value to
the devm_request_irq().
Fix it by adding a check for the return value irq_id.
Signed-off-by: Jiajun Cao <jjcao20@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20210622131947.94346-1-jjcao20@fudan.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
KVM/arm64 support for MTE, courtesy of Steven Price.
It allows the guest to use memory tagging, and offers
a new userspace API to save/restore the tags.
* kvm-arm64/mmu/mte:
KVM: arm64: Document MTE capability and ioctl
KVM: arm64: Add ioctl to fetch/store tags in a guest
KVM: arm64: Expose KVM_ARM_CAP_MTE
KVM: arm64: Save/restore MTE registers
KVM: arm64: Introduce MTE VM feature
arm64: mte: Sync tags for pages where PTE is untagged
Signed-off-by: Marc Zyngier <maz@kernel.org>
Conceptually, this belongs more into the firmware utils
rather than the mvm opmode, so move the collection and
output there.
Note that this slightly changes the format of the Status
line.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.b82b60d81346.Ide3b688107f6a59c7fc7eb1d8f2002b0a5c1f2d2@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
This new feature allows OEMs to set a special reduced power table in a
UEFI variable, which we use to tell the firmware to change the TX
power tables.
Read the variable and store it in a dram block to pass it to the
firmware. We do this as part of the PNVM loading flow.
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210621103449.259a33ba5074.I2e0bb142d2a9c412547cba89b62dd077b328fdc4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In gen3, after firmware is alive, we no longer need the
firmware and image loader images, only the context info
itself and PRPH info/scratch need to remain.
Call iwl_pcie_ctxt_info_gen3_free() appropriately in the
alive callback (iwl_trans_pcie_gen2_fw_alive()) with a new
argument indicating whether it can free everything or only
partially.
The context info and PRPH scratch are also not needed after
PNVM load, but we don't have a good hook for freeing after
that, so keep them for now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.8230d91a46c1.Ia7db71e5e6265ca87363f1481eac1bc3bbebb15c@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
We don't fill in phy_data.d1 in no-data RX, and thus we
pretend some data is actually filled in radiotap when it
isn't or has default (zero) values.
Fill in phy_data.d1 appropriately, and while at it also
move the info_type initialization into the initializer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.3d488885f77c.Ib97a2bc57c1e9fb98927dc6f802568db313abe3b@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
After firmware alive, iwl_trans_pcie_gen2_fw_alive() is called
to free the context info. However, on gen3 that will then free
the context info with the wrong size.
Since we free this allocation later, let it stick around until
the device is stopped for now, freeing some of it earlier is a
separate change.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.afb63fb8cbc1.If4968db8e09f4ce2a1d27a6d750bca3d132d7d70@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
It's been a while that the firmware uses LONG_GROUP by default
and not LEGACY_GROUP.
Until now the firmware wrongly advertise the WOWLAN_GET_STATUS
command's version with LEGACY_GROUP, but it is now being fixed.
In order to support both firmwares, first try to get the version
number of the command with the LONG_GROUP and if the firmware
didn't advertise the command version with LONG_GROUP, try to get
the command version with LEGACY_GROUP.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.cd6f4e421430.Iec07c746c8e65bc267e4750f38e4f74f2010ca45@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
These two version updates deprecate the need to set/get the nonqos sequence
counter during suspend/resume flow respectively; NICs supporting this
version maintain this counter internally and don't lose it during the
suspend/resume flow.
Note that this means that for such NICs the NON_QOS_TX_COUNTER_CMD is no
longer ever sent.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.dd25dd667798.I8db9adcdbb133304b58cf417f8698611138c83b4@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
When operating in AP mode with NICs supporting the AP_LINK_PS hw flag,
mac80211 doesn't need to start/stop queueing tx for connected stations
because the FW already handles that.
Signed-off-by: Naftali Goldstein <naftali.goldstein@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.64df994c8fbb.I0fa5cda3a5f893a396eef30a01522422be359e69@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
In case of unbinding, the FW would remove the session protection time
events without sending a notification, so explicitly cancel the
session protection, so future requests for mgd_prepare_tx() would not
assume that the session protection is running.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618105614.7c30f85ed241.Ibc19fdbefca7135f2c4ea83d0aef6b81b5033dcd@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Read the UNII4 setting from the ACPI table and use it in the
LARI_CONFIG_CHANGE_CMD accordingly.
This setting allows OEMs to enable or disable UNII4, bypassing the FW
defaults.
Signed-off-by: Abhishek Naik <abhishek.naik@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617100544.223090c509c4.If03cb5393607ae494041b6187bcec134d6a1e06d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
The TR/CR tail data are meant to be per-queue-arrays, however,
we allocate them completely wrong (we have a separate allocation
per queue).
Looking at this more closely, it turns out that the hardware
never uses these - we have a separate free list per RX queue
and maintain a write pointer for that in a register, and the
RX itself is indicated in the RB status (rb_stts) DMA region.
Despite nothing using the tail pointers, the hardware will
unconditionally access them to write updates, even when we aren't
using CRs/TRs.
Give it dummy values that we never use/update so it can do that
without causing trouble.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210617110647.5f5764e04c46.I4d5de1929be048085767f1234a1e07b517ab6a2d@changeid
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
syzbot reported a memory leak related to sigqueue caching.
The assumption that a task cannot cache a sigqueue after the signal handler
has been dropped and exit_task_sigqueue_cache() has been invoked turns out
to be wrong.
Such a task can still invoke release_task(other_task), which cleans up the
signals of 'other_task' and ends up in sigqueue_cache_or_free(), which in
turn will cache the signal because task->sigqueue_cache is NULL. That's
obviously bogus because nothing will free the cached signal of that task
anymore, so the cached item is leaked.
This happens when e.g. the last non-leader thread exits and reaps the
zombie leader.
Prevent this by setting tsk::sigqueue_cache to an error pointer value in
exit_task_sigqueue_cache() which forces any subsequent invocation of
sigqueue_cache_or_free() from that task to hand the sigqueue back to the
kmemcache.
Add comments to all relevant places.
Fixes: 4bad58ebc8 ("signal: Allow tasks to cache one sigqueue struct")
Reported-by: syzbot+0bac5fec63d4f399ba98@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Link: https://lore.kernel.org/r/878s32g6j5.ffs@nanos.tec.linutronix.de
In the nested KVM case, replace H_TLB_INVALIDATE by the new hcall
H_RPT_INVALIDATE if available. The availability of this hcall
is determined from "hcall-rpt-invalidate" string in ibm,hypertas-functions
DT property.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-7-bharata@linux.ibm.com
Now that we have H_RPT_INVALIDATE fully implemented, enable
support for the same via KVM_CAP_PPC_RPT_INVALIDATE KVM capability
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-6-bharata@linux.ibm.com
Enable support for process-scoped invalidations from nested
guests and partition-scoped invalidations for nested guests.
Process-scoped invalidations for any level of nested guests
are handled by implementing H_RPT_INVALIDATE handler in the
nested guest exit path in L0.
Partition-scoped invalidation requests are forwarded to the
right nested guest, handled there and passed down to L0
for eventual handling.
Signed-off-by: Bharata B Rao <bharata@linux.ibm.com>
[aneesh: Nested guest partition-scoped invalidation changes]
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
[mpe: Squash in fixup patch]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210621085003.904767-5-bharata@linux.ibm.com
