sanitize_restored_user_xstate() preserves the supervisor states only
when the fx_only argument is zero, which allows unprivileged user space
to put supervisor states back into init state.
Preserve them unconditionally.
[ bp: Fix a typo or two in the text. ]
Fixes: 5d6b6a6f9b ("x86/fpu/xstate: Update sanitize_restored_xstate() for supervisor xstates")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210618143444.438635017@linutronix.de
This reverts commit 1815d9c86e.
Unfortunately this inverts the locking hierarchy, so back to the
drawing board. Full lockdep splat below:
======================================================
WARNING: possible circular locking dependency detected
5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted
------------------------------------------------------
kms_frontbuffer/1087 is trying to acquire lock:
ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40
but task is already holding lock:
ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&dev->mode_config.mutex){+.+.}-{3:3}:
__mutex_lock+0xab/0x970
drm_client_modeset_probe+0x22e/0xca0
__drm_fb_helper_initial_config_and_unlock+0x42/0x540
intel_fbdev_initial_config+0xf/0x20 [i915]
async_run_entry_fn+0x28/0x130
process_one_work+0x26d/0x5c0
worker_thread+0x37/0x380
kthread+0x144/0x170
ret_from_fork+0x1f/0x30
-> #1 (&client->modeset_mutex){+.+.}-{3:3}:
__mutex_lock+0xab/0x970
drm_client_modeset_commit_locked+0x1c/0x180
drm_client_modeset_commit+0x1c/0x40
__drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0
drm_fb_helper_set_par+0x34/0x40
intel_fbdev_set_par+0x11/0x40 [i915]
fbcon_init+0x270/0x4f0
visual_init+0xc6/0x130
do_bind_con_driver+0x1e5/0x2d0
do_take_over_console+0x10e/0x180
do_fbcon_takeover+0x53/0xb0
register_framebuffer+0x22d/0x310
__drm_fb_helper_initial_config_and_unlock+0x36c/0x540
intel_fbdev_initial_config+0xf/0x20 [i915]
async_run_entry_fn+0x28/0x130
process_one_work+0x26d/0x5c0
worker_thread+0x37/0x380
kthread+0x144/0x170
ret_from_fork+0x1f/0x30
-> #0 (&dev->master_mutex){+.+.}-{3:3}:
__lock_acquire+0x151e/0x2590
lock_acquire+0xd1/0x3d0
__mutex_lock+0xab/0x970
drm_is_current_master+0x1b/0x40
drm_mode_getconnector+0x37e/0x4a0
drm_ioctl_kernel+0xa8/0xf0
drm_ioctl+0x1e8/0x390
__x64_sys_ioctl+0x6a/0xa0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&dev->mode_config.mutex);
lock(&client->modeset_mutex);
lock(&dev->mode_config.mutex);
lock(&dev->master_mutex);
*** DEADLOCK ***
1 lock held by kms_frontbuffer/1087:
#0: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0
stack backtrace:
CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1
Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019
Call Trace:
dump_stack+0x7f/0xad
check_noncircular+0x12e/0x150
__lock_acquire+0x151e/0x2590
lock_acquire+0xd1/0x3d0
__mutex_lock+0xab/0x970
drm_is_current_master+0x1b/0x40
drm_mode_getconnector+0x37e/0x4a0
drm_ioctl_kernel+0xa8/0xf0
drm_ioctl+0x1e8/0x390
__x64_sys_ioctl+0x6a/0xa0
do_syscall_64+0x39/0xb0
entry_SYSCALL_64_after_hwframe+0x44/0xae
Note that this broke the intel-gfx CI pretty much across the board
because it has to reboot machines after it hits a lockdep splat.
Testcase: igt/debugfs_test/read_all_entries
Acked-by: Petri Latvala <petri.latvala@intel.com>
Fixes: 1815d9c86e ("drm: add a locked version of drm_is_current_master")
Cc: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210622075409.2673805-1-daniel.vetter@ffwll.ch
Fixes scripts/checkpatch.pl warning:
WARNING: Possible unnecessary 'out of memory' message
Remove it can help us save a bit of memory. After that, the static
function getdqbuf() becomes unnecessary, get rid of it and instead call
kmalloc() directly.
Link: https://lore.kernel.org/r/20210618014720.1977-2-thunder.leizhen@huawei.com
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
A KVM guest could store tags in a page even if the VMM hasn't mapped
the page with PROT_MTE. So when restoring pages from swap we will
need to check to see if there are any saved tags even if !pte_tagged().
However don't check pages for which pte_access_permitted() returns false
as these will not have been swapped out.
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210621111716.37157-2-steven.price@arm.com
The cpu lock implementation uses a full memory barrier to take
the lock, but no memory barriers when releasing the lock. This
means that changes performed by a lock owner may not be seen by
the next lock owner. This may have been "good enough" for use
by dump_stack() as a serialization mechanism, but it is not
enough to provide proper protection for a critical section.
Correct this problem by using acquire/release memory barriers
for lock/unlock, respectively.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210617095051.4808-3-john.ogness@linutronix.de
dump_stack() implements its own cpu-reentrant spinning lock to
best-effort serialize stack traces in the printk log. However,
there are other functions (such as show_regs()) that can also
benefit from this serialization.
Move the cpu-reentrant spinning lock (cpu lock) into new helper
functions printk_cpu_lock_irqsave()/printk_cpu_unlock_irqrestore()
so that it is available for others as well. For !CONFIG_SMP the
cpu lock is a NOP.
Note that having multiple cpu locks in the system can easily
lead to deadlock. Code needing a cpu lock should use the
printk cpu lock, since the printk cpu lock could be acquired
from any code and any context.
Also note that it is not necessary for a cpu lock to disable
interrupts. However, in upcoming work this cpu lock will be used
for emergency tasks (for example, atomic consoles during kernel
crashes) and any interruptions while holding the cpu lock should
be avoided if possible.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: Petr Mladek <pmladek@suse.com>
[pmladek@suse.com: Backported on top of 5.13-rc1.]
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210617095051.4808-2-john.ogness@linutronix.de
When userspace requests a GPIO v1 line info changed event,
lineinfo_watch_read() populates and returns the gpioline_info_changed
structure. It contains 5 words of padding at the end which are not
initialized before being returned to userspace.
Zero the structure in gpio_v2_line_info_change_to_v1() before populating
its contents.
Fixes: aad955842d ("gpiolib: cdev: support GPIO_V2_GET_LINEINFO_IOCTL and GPIO_V2_GET_LINEINFO_WATCH_IOCTL")
Signed-off-by: Gabriel Knezek <gabeknez@linux.microsoft.com>
Reviewed-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Selftest updates from Andrew Jones, fixing the sysgreg list
expectations by dealing with multiple configurations, such
as with or without a PMU.
* kvm-arm64/selftest/sysreg-list-fix:
KVM: arm64: Update MAINTAINERS to include selftests
KVM: arm64: selftests: get-reg-list: Split base and pmu registers
KVM: arm64: selftests: get-reg-list: Remove get-reg-list-sve
KVM: arm64: selftests: get-reg-list: Provide config selection option
KVM: arm64: selftests: get-reg-list: Prepare to run multiple configs at once
KVM: arm64: selftests: get-reg-list: Introduce vcpu configs
As the KVM/arm64 selftests are routed via the kvmarm tree,
add the relevant references to the MAINTAINERS file.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210622070732.zod7gaqhqo344vg6@gator
Since KVM commit 11663111cd ("KVM: arm64: Hide PMU registers from
userspace when not available") the get-reg-list* tests have been
failing with
...
... There are 74 missing registers.
The following lines are missing registers:
...
where the 74 missing registers are all PMU registers. This isn't a
bug in KVM that the selftest found, even though it's true that a
KVM userspace that wasn't setting the KVM_ARM_VCPU_PMU_V3 VCPU
flag, but still expecting the PMU registers to be in the reg-list,
would suddenly no longer have their expectations met. In that case,
the expectations were wrong, though, so that KVM userspace needs to
be fixed, and so does this selftest. The fix for this selftest is to
pull the PMU registers out of the base register sublist into their
own sublist and then create new, pmu-enabled vcpu configs which can
be tested.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-6-drjones@redhat.com
Now that we can easily run the test for multiple vcpu configs, let's
merge get-reg-list and get-reg-list-sve into just get-reg-list. We
also add a final change to make it more possible to run multiple
tests, which is to fork the test, rather than directly run it. That
allows a test to fail, but subsequent tests can still run.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-5-drjones@redhat.com
Add a new command line option that allows the user to select a specific
configuration, e.g. --config=sve will give the sve config. Also provide
help text and the --help/-h options.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-4-drjones@redhat.com
We don't want to have to create a new binary for each vcpu config, so
prepare to run the test for multiple vcpu configs in a single binary.
We do this by factoring out the test from main() and then looping over
configs. When given '--list' we still never print more than a single
reg-list for a single vcpu config though, because it would be confusing
otherwise.
No functional change intended.
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-3-drjones@redhat.com
We already break register lists into sublists that get selected based
on vcpu config. However, since we only had two configs (vregs and sve),
we didn't structure the code very well to manage them. Restructure it
now to more cleanly handle register sublists that are dependent on the
vcpu config.
This patch has no intended functional change (except for the vcpu
config name now being prepended to all output).
Signed-off-by: Andrew Jones <drjones@redhat.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210531103344.29325-2-drjones@redhat.com
When reading binary attributes in progress, buffer->bin_buffer is setup in
configfs_read_bin_file() but never freed.
Fixes: 03607ace80 ("configfs: implement binary attributes")
Signed-off-by: Chung-Chiang Cheng <cccheng@synology.com>
[hch: move the vfree rather than duplicating it]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Fix some spelling mistakes in comments:
withoug ==> without
numer ==> number
aswell ==> as well
referes ==> refers
childs ==> children
unnecesarry ==> unnecessary
Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Reviewed-by: Alexander Dahl <ada@thorsis.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Replace open coded divisor calculations with the DIV_ROUND_UP kernel macro
for better readability.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Server responds to LOOKUP and other ops (READDIRPLUS/CREATE/MKNOD/...)
with ourarg containing nodeid and generation.
If a fuse inode is found in inode cache with the same nodeid but different
generation, the existing fuse inode should be unhashed and marked "bad" and
a new inode with the new generation should be hashed instead.
This can happen, for example, with passhrough fuse filesystem that returns
the real filesystem ino/generation on lookup and where real inode numbers
can get recycled due to real files being unlinked not via the fuse
passthrough filesystem.
With current code, this situation will not be detected and an old fuse
dentry that used to point to an older generation real inode, can be used to
access a completely new inode, which should be accessed only via the new
dentry.
Note that because the FORGET message carries the nodeid w/o generation, the
server should wait to get FORGET counts for the nlookup counts of the old
and reused inodes combined, before it can free the resources associated to
that nodeid.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The current fuse module filters out fallocate(FALLOC_FL_ZERO_RANGE)
returning -EOPNOTSUPP. libnbd's nbdfuse would like to translate
FALLOC_FL_ZERO_RANGE requests into the NBD command
NBD_CMD_WRITE_ZEROES which allows NBD servers that support it to do
zeroing efficiently.
This commit treats this flag exactly like FALLOC_FL_PUNCH_HOLE.
A way to test this, requiring fuse >= 3, nbdkit >= 1.8 and the latest
nbdfuse from https://gitlab.com/nbdkit/libnbd/-/tree/master/fuse is to
create a file containing some data and "mirror" it to a fuse file:
$ dd if=/dev/urandom of=disk.img bs=1M count=1
$ nbdkit file disk.img
$ touch mirror.img
$ nbdfuse mirror.img nbd://localhost &
(mirror.img -> nbdfuse -> NBD over loopback -> nbdkit -> disk.img)
You can then run commands such as:
$ fallocate -z -o 1024 -l 1024 mirror.img
and check that the content of the original file ("disk.img") stays
synchronized. To show NBD commands, export LIBNBD_DEBUG=1 before
running nbdfuse. To clean up:
$ fusermount3 -u mirror.img
$ killall nbdkit
Signed-off-by: Richard W.M. Jones <rjones@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
This function used to be called from fuse_dentry_automount(). This code
was moved to fuse_get_tree_submount() in the same file since then. It
is unlikely there will ever be another user. No need to be extern in
this case.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
fc_mount() already handles the vfs_get_tree(), sb->s_umount
unlocking and vfs_create_mount() sequence. Using it greatly
simplifies fuse_dentry_automount().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
We recently fixed an infinite loop by setting the SB_BORN flag on
submounts along with the write barrier needed by super_cache_count().
This is the job of vfs_get_tree() and FUSE shouldn't have to care
about the barrier at all.
Split out some code from fuse_dentry_automount() to the dedicated
fuse_get_tree_submount() handler for submounts and call vfs_get_tree().
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
The creation of a submount is open-coded in fuse_dentry_automount().
This brings a lot of complexity and we recently had to fix bugs
because we weren't setting SB_BORN or because we were unlocking
sb->s_umount before sb was fully configured. Most of these could
have been avoided by using the mount API instead of open-coding.
Basically, this means coming up with a proper ->get_tree()
implementation for submounts and call vfs_get_tree(), or better
fc_mount().
The creation of the superblock for submounts is quite different from
the root mount. Especially, it doesn't require to allocate a FUSE
filesystem context, nor to parse parameters.
Introduce a dedicated context ops for submounts to make this clear.
This is just a placeholder for now, fuse_get_tree_submount() will
be populated in a subsequent patch.
Only visible change is that we stop allocating/freeing a useless FUSE
filesystem context with submounts.
Signed-off-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Even if POSIX doesn't mandate it, linux users legitimately expect sync() to
flush all data and metadata to physical storage when it is located on the
same system. This isn't happening with virtiofs though: sync() inside the
guest returns right away even though data still needs to be flushed from
the host page cache.
This is easily demonstrated by doing the following in the guest:
$ dd if=/dev/zero of=/mnt/foo bs=1M count=5K ; strace -T -e sync sync
5120+0 records in
5120+0 records out
5368709120 bytes (5.4 GB, 5.0 GiB) copied, 5.22224 s, 1.0 GB/s
sync() = 0 <0.024068>
and start the following in the host when the 'dd' command completes
in the guest:
$ strace -T -e fsync /usr/bin/sync virtiofs/foo
fsync(3) = 0 <10.371640>
There are no good reasons not to honor the expected behavior of sync()
actually: it gives an unrealistic impression that virtiofs is super fast
and that data has safely landed on HW, which isn't the case obviously.
Implement a ->sync_fs() superblock operation that sends a new FUSE_SYNCFS
request type for this purpose. Provision a 64-bit placeholder for possible
future extensions. Since the file server cannot handle the wait == 0 case,
we skip it to avoid a gratuitous roundtrip. Note that this is
per-superblock: a FUSE_SYNCFS is send for the root mount and for each
submount.
Like with FUSE_FSYNC and FUSE_FSYNCDIR, lack of support for FUSE_SYNCFS in
the file server is treated as permanent success. This ensures
compatibility with older file servers: the client will get the current
behavior of sync() not being propagated to the file server.
Note that such an operation allows the file server to DoS sync(). Since a
typical FUSE file server is an untrusted piece of software running in
userspace, this is disabled by default. Only enable it with virtiofs for
now since virtiofsd is supposedly trusted by the guest kernel.
Reported-by: Robert Krawitz <rlk@redhat.com>
Signed-off-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:
Thread-1 Thread-2
======== ========
->fuse_simple_request() ->shutdown
->__fuse_request_send()
->queue_request() ->fuse_abort_conn()
->fuse_dev_do_read() ->acquire(fpq->lock)
->wait_for(fpq->lock) ->set err to all req's in fpq->io
->release(fpq->lock)
->acquire(fpq->lock)
->add req to fpq->io
After the userspace copy is done the request will be ended, but
req->out.h.error will remain uninitialized. Also the copy might block
despite being already aborted.
Fix both issues by not allowing the request to be queued on the fpq->io
list after fuse_abort_conn() has processed this list.
Reported-by: Pradeep P V K <pragalla@codeaurora.org>
Fixes: fd22d62ed0 ("fuse: no fc->lock for iqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
In case of xfrm offload, if xdo_dev_state_add() of driver returns
-EOPNOTSUPP, xfrm offload fallback is failed.
In xfrm state_add() both xso->dev and xso->real_dev are initialized to
dev and when err(-EOPNOTSUPP) is returned only xso->dev is set to null.
So in this scenario the condition in func validate_xmit_xfrm(),
if ((x->xso.dev != dev) && (x->xso.real_dev == dev))
return skb;
returns true, due to which skb is returned without calling esp_xmit()
below which has fallback code. Hence the CRYPTO_FALLBACK is failing.
So fixing this with by keeping x->xso.real_dev as NULL when err is
returned in func xfrm_dev_state_add().
Fixes: bdfd2d1fa7 ("bonding/xfrm: use real_dev instead of slave_dev")
Signed-off-by: Ayush Sawal <ayush.sawal@chelsio.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
QPC, SQC and RQC timestamp formats and capabilities are always equal
because they represent general hardware support. So instead of code
duplication, let's merge them into general enum and logic.
Signed-off-by: Aharon Landau <aharonl@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Since, overlapping mappings are not supported by the DMA API we should
report an error if active_cacheline_insert returns -EEXIST.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Hamza Mahfooz <someguy@effective-light.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally reading across neighboring fields.
Instead of using memcpy to read across multiple struct members, just
perform per-member assignments as already done for other members.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The comparisons of the unsigned int hw_type to less than zero always
false because it is unsigned. Fix this by using an int for the
assignment and less than zero check.
Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 9d2df9a0ad80 ("ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Message-Id: <20210616162913.15259-1-colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Some Aspeed KCS devices can derive the status register address from the
address of the data register. As such, the address of the status
register can be implicit in the configuration if desired. On the other
hand, sometimes address schemes might be requested that are incompatible
with the default addressing scheme. Allow these requests where possible
if the devicetree specifies the status register address.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Message-Id: <20210608104757.582199-17-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Input Buffer Full Interrupt Enable (IBFIE) is typoed as IBFIF for some
registers in the datasheet. Fix the driver to use the sensible acronym.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-16-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Apply the SerIRQ ID and level/sense behaviours from the devicetree if
provided.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-15-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Allocating IO and IRQ resources to LPC devices is in-theory an operation
for the host, however ASPEED don't appear to expose this capability
outside the BMC (e.g. SuperIO). Instead, we are left with BMC-internal
registers for managing these resources, so introduce a devicetree
property for KCS devices to describe SerIRQ properties.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Message-Id: <20210608104757.582199-14-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Given the deprecated binding, improve the ability to detect issues in
the platform devicetrees. Further, a subsequent patch will introduce a
new interrupts property for specifying SerIRQ behaviour, so convert
before we do any further additions.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-13-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
kcs_bmc_serio acts as a bridge between the KCS drivers in the IPMI
subsystem and the existing userspace interfaces available through the
serio subsystem. This is useful when userspace would like to make use of
the BMC KCS devices for purposes that aren't IPMI.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-12-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
This way devices don't get delivered IRQs when no-one is interested.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-11-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Add a mechanism for controlling whether the client associated with a
KCS device will receive Input Buffer Full (IBF) and Output Buffer Empty
(OBE) events. This enables an abstract implementation of poll() for KCS
devices.
A wart in the implementation is that the ASPEED KCS devices don't
support an OBE interrupt for the BMC. Instead we pretend it has one by
polling the status register waiting for the Output Buffer Full (OBF) bit
to clear, and generating an event when OBE is observed.
Cc: CS20 KWLiu <KWLIU@nuvoton.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-10-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Now that we have untangled the data-structures, split the userspace
interface out into its own module. Userspace interfaces and drivers are
registered to the KCS BMC core to support arbitrary binding of either.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-9-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Move all client-private data out of `struct kcs_bmc` into the KCS client
implementation.
With this change the KCS BMC core code now only concerns itself with
abstract `struct kcs_bmc` and `struct kcs_bmc_client` types, achieving
expected separation of concerns. Further, the change clears the path for
implementation of alternative userspace interfaces.
The chardev data-structures are rearranged in the same manner applied to
the KCS device driver data-structures in an earlier patch - `struct
kcs_bmc_client` is embedded in the client's private data and we exploit
container_of() to translate as required.
Finally, now that it is free of client data, `struct kcs_bmc` is renamed
to `struct kcs_bmc_device` to contrast `struct kcs_bmc_client`.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-8-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Strengthen the distinction between code that abstracts the
implementation of the KCS behaviours (device drivers) and code that
exploits KCS behaviours (clients). Neither needs to know about the APIs
required by the other, so provide separate headers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Message-Id: <20210608104757.582199-7-andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Make the KCS device drivers responsible for allocating their own memory.
Until now the private data for the device driver was allocated internal
to the private data for the chardev interface. This coupling required
the slightly awkward API of passing through the struct size for the
driver private data to the chardev constructor, and then retrieving a
pointer to the driver private data from the allocated chardev memory.
In addition to being awkward, the arrangement prevents the
implementation of alternative userspace interfaces as the device driver
private data is not independent.
Peel a layer off the onion and turn the data-structures inside out by
exploiting container_of() and embedding `struct kcs_device` in the
driver private data.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-6-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Take steps towards defining a coherent API to separate the KCS device
drivers from the userspace interface. Decreasing the coupling will
improve the separation of concerns and enable the introduction of
alternative userspace interfaces.
For now, simply split the chardev logic out to a separate file. The code
continues to build into the same module.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-5-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Rename the functions in preparation for separating the IPMI chardev out
from the KCS BMC core.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Zev Weiss <zweiss@equinix.com>
Message-Id: <20210608104757.582199-4-andrew@aj.id.au>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
