The UM virtual PCI devices currently cannot be suspended properly
since the virtio driver already disables VQs well before the PCI
bus's suspend_noirq wants to complete the transition by writing to
PCI config space.
After trying around for a long time with moving the devices on the
DPM list, trying to create dependencies between them, etc. I gave
up and instead added UML specific cross-driver API that lets the
virt-pci code enable not suspending/resuming VQs for its devices.
This then allows the PCI bus suspend_noirq to still talk to the
device, and suspend/resume works properly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
If we happen to get multiple messages while IRQS are already
suspended, we still need to handle them, since otherwise the
simulation blocks.
Remove the "prevent nesting" part, time_travel_add_irq_event()
will deal with being called multiple times just fine.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
We should be able to ndelay() from any context, even from an
interrupt context! However, this is broken (not functionally,
but locking-wise) in time-travel because we'll get into the
time-travel code and enable interrupts to handle messages on
other time-travel aware subsystems (only virtio for now).
Luckily, I've already reworked the time-travel aware signal
(interrupt) delivery for suspend/resume to have a time travel
handler, which runs directly in the context of the signal and
not from the Linux interrupt.
In order to fix this time-travel issue then, we need to do a
few things:
1) rework the signal handling code to call time-travel handlers
(only) if interrupts are disabled but signals aren't blocked,
instead of marking it only pending there. This is needed to
not deadlock other communication.
2) rework time-travel to not enable interrupts while it's
waiting for a message;
3) rework time-travel to not (just) disable interrupts but
rather block signals at a lower level while it needs them
disabled for communicating with the controller.
Finally, since now we can actually spend even virtual time
in interrupts-disabled sections, the delay warning when we
deliver a time-travel delayed interrupt is no longer valid,
things can (and should) now get delayed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This will be necessary in the userspace side to fix the
signal/interrupt handling in time-travel=ext mode, which
is the next patch.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Use signals_enabled instead of always jumping through
a function call to read it, there's not much point in
that.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This function doesn't exist, remove its declaration.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-By: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Add IO memory emulation that uses callbacks for read/write to
the allocated regions. The callbacks can be registered by the
users using logic_iomem_alloc().
To use, an architecture must 'select LOGIC_IOMEM' in Kconfig
and then include <asm-generic/logic_io.h> into asm/io.h to get
the __raw_read*/__raw_write* functions.
Optionally, an architecture may 'select LOGIC_IOMEM_FALLBACK'
in which case non-emulated regions will 'fall back' to the
various real_* functions that must then be provided.
Cc: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Adjust the kconfig a little to allow disabling NO_IOMEM in UML. To
make an "allyesconfig" with CONFIG_NO_IOMEM=n build, adjust a few
Kconfig things elsewhere and add dummy asm/fb.h and asm/vga.h files.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Mauro says:
> As discussed at:
> https://lore.kernel.org/linux-doc/871r9k6rmy.fsf@meer.lwn.net/
>
> It is better to avoid using :doc:`foo` to refer to Documentation/foo.rst, as the
> automarkup.py extension should handle it automatically, on most cases.
>
> There are a couple of exceptions to this rule:
>
> 1. when :doc: tag is used to point to a kernel-doc DOC: markup;
> 2. when it is used with a named tag, e. g. :doc:`some name <foo>`;
>
> On this series:
>
> Patch 1 manually adjust the references inside driver-api/pm/devices.rst,
> as there it uses :file:`foo` to refer to some Documentation/ files;
>
> Patch 2 converts a table at Documentation/dev-tools/kunit/api/index.rst
> into a list, carefully avoiding the
>
> The remaining patches convert the other occurrences via a replace script.
> They were manually edited, in order to honour 80-columns where possible.
>
> This series based on docs-next branch. In order to avoid merge conflicts,
> I rebased it internally against yesterday's linux-next, dropping a patch
> and a hunk that would have caused conflicts there.
>
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6fde409079959a95b62b9b2692503608d7ff0dbd.1623824363.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
We'll be replacing :doc:`foo` references to
Documentation/foo.rst. Yet, here it happens inside a table.
Doing a search-and-replace would break it.
Yet, as there's no good reason to use a table there,
let's just convert it into a list.
Reviewed-by: David Gow <davidgow@google.com>
Acked-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/07d3a8ccafbb6345d6e78fb090290859e84361a1.1623824363.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/8036126a59adb720dbc9233341ad5a08531cf73f.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9bd9f5c067c4b068a974730a14fe8d68e1be0c9a.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+2217 ('∗'): ASTERISK OPERATOR
use ASCII asterisk instead of the ASTERISK OPERATOR
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/c5c3c384c48779ca7c9dcd90183cefe20ac82928.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9a93b72f99f8f3328269076ceff50248ac9c5af5.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+feff (''): BOM
as it is not needed on UTF-8
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/0a4b0c38a9cd1133402a04a7ff60fefd9682d42e.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/b2186e313f990488ded56d9b8d35a2d1fe479aa1.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/b6a04e881bc80a3c1d3d23ccbc8208ca3c9053fd.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The conversion tools used during DocBook/LaTeX/html/Markdown->ReST
conversion and some cut-and-pasted text contain some characters that
aren't easily reachable on standard keyboards and/or could cause
troubles when parsed by the documentation build system.
Replace the occurences of the following characters:
- U+00a0 (' '): NO-BREAK SPACE
as it can cause lines being truncated on PDF output
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/551a2af0e654226067e5c376d3e2d959cc738f39.1623826294.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The correct script name should be 'divergence.sh' instead of
'divergences.sh'.
I didn't find divergences.sh in the path of acpica/generate/linux/.
Signed-off-by: Hao Chen <chenhaoa@uniontech.com>
Link: https://lore.kernel.org/r/20210617023300.30114-1-chenhaoa@uniontech.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
The source (&dcbx_info->operational.params) and dest
(&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params
(560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used
as the memcpy() size.
However it seems that struct qed_dcbx_operational_params
(dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params
(p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte
for "valid").
On the assumption that the size is wrong (rather than the source structure
type), adjust the memcpy() size argument to be 4 bytes smaller and add
a BUILD_BUG_ON() to validate any changes to the structure sizes.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
100GbE Intel Wired LAN Driver Updates 2021-06-17
This series contains updates to ice driver only.
Jake corrects a couple of entries in the PTYPE table to properly
reflect the datasheet and removes unneeded NULL checks for some
PTP calls.
Paul reduces the scope of variables and removes the use of a local
variable.
Shaokun Zhang removes a duplicate function declaration.
Lorenzo Bianconi fixes a compilation warning if PTP_1588_CLOCK is
disabled.
Colin Ian King changes a for loop to remove an unneeded 'continue'.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>