Commit graph

1,031,458 commits

Author SHA1 Message Date
Thierry Reding
b966d2db05 arm64: tegra: Hook up memory controller to SMMU on Tegra186
On Tegra186 and later, the memory controller needs to be programmed in
coordination with any of the ARM SMMU instances to configure the stream
ID used for each memory client.

To support this, add a phandle reference to the memory controller to the
SMMU device tree node.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-11 13:33:32 +02:00
Thierry Reding
bb84a31bed arm64: tegra: Use correct compatible string for Tegra186 SMMU
The SMMU found on Tegra186 requires interoperation with the memory
controller in order to program stream ID overrides. The generic ARM SMMU
500 compatible is therefore inaccurate. Replace it with a more correct,
SoC-specific compatible string.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-11 13:33:16 +02:00
Thierry Reding
bd778b8939 firmware: tegra: bpmp: Fix Tegra234-only builds
The tegra186_bpmp_ops symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-11 13:31:51 +02:00
Thierry Reding
e2d0ee225e soc/tegra: fuse: Fix Tegra234-only builds
The tegra30_fuse_read() symbol is used on Tegra234, so make sure it's
available.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2021-06-11 13:31:01 +02:00
Marek Szyprowski
38f61ef1a0 ARM: exynos_defconfig: restore framebuffer support
Commit f611b1e762 ("drm: Avoid circular dependencies for CONFIG_FB")
changed the Kconfig dependencies, so COFNIG_FB is no longer selected in
defconfigs. Restore support for it in exynos_defconfig, because most
Exynos platforms had graphical console running on framebuffer device
emulated on the Exynos DRM drivers.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20210611100204.6240-1-m.szyprowski@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
2021-06-11 12:54:33 +02:00
Xiyu Yang
7c8f176d6a iommu/arm-smmu: Fix arm_smmu_device refcount leak in address translation
The reference counting issue happens in several exception handling paths
of arm_smmu_iova_to_phys_hard(). When those error scenarios occur, the
function forgets to decrease the refcount of "smmu" increased by
arm_smmu_rpm_get(), causing a refcount leak.

Fix this issue by jumping to "out" label when those error scenarios
occur.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Reviewed-by: Rob Clark <robdclark@chromium.org>
Link: https://lore.kernel.org/r/1623293391-17261-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:39:17 +01:00
Xiyu Yang
1adf30f198 iommu/arm-smmu: Fix arm_smmu_device refcount leak when arm_smmu_rpm_get fails
arm_smmu_rpm_get() invokes pm_runtime_get_sync(), which increases the
refcount of the "smmu" even though the return value is less than 0.

The reference counting issue happens in some error handling paths of
arm_smmu_rpm_get() in its caller functions. When arm_smmu_rpm_get()
fails, the caller functions forget to decrease the refcount of "smmu"
increased by arm_smmu_rpm_get(), causing a refcount leak.

Fix this issue by calling pm_runtime_resume_and_get() instead of
pm_runtime_get_sync() in arm_smmu_rpm_get(), which can keep the refcount
balanced in case of failure.

Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Link: https://lore.kernel.org/r/1623293672-17954-1-git-send-email-xiyuyang19@fudan.edu.cn
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:39:01 +01:00
Christophe JAILLET
63879e2964 nvmem: core: add a missing of_node_put
'for_each_child_of_node' performs an of_node_get on each iteration, so a
return from the middle of the loop requires an of_node_put.

Fixes: e888d445ac ("nvmem: resolve cells from DT at registration time")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611102321.11509-1-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11 12:34:04 +02:00
Greg Kroah-Hartman
7c4363d394 USB-serial fixes for 5.13-rc6
Here are two fixes for the cp210x driver. The first fixes a regression
 with early revisions of the CP2102N which specifically broke some ESP32
 development boards. The second makes sure that the pin configuration is
 detected properly also for the CP2102N QFN20 package.
 
 Both have been in linux-next over night and with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYMM1XQAKCRALxc3C7H1l
 CH1DAQDlY9HI8ujDidiFHqBw/UduU7jmncuiGR/sAVzEAstPigD/VOJH+cD/yn7Z
 35gSi1DvdrBRjs8qTlzZvoiSN81nTgM=
 =yLzP
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-5.13-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial fixes for 5.13-rc6

Here are two fixes for the cp210x driver. The first fixes a regression
with early revisions of the CP2102N which specifically broke some ESP32
development boards. The second makes sure that the pin configuration is
detected properly also for the CP2102N QFN20 package.

Both have been in linux-next over night and with no reported issues.

* tag 'usb-serial-5.13-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: cp210x: fix CP2102N-A01 modem control
  USB: serial: cp210x: fix alternate function for CP2102N QFN20
2021-06-11 12:32:49 +02:00
Jiri Prchal
fd307a4ad3 nvmem: prepare basics for FRAM support
Added enum and string for FRAM (ferroelectric RAM) to expose it as file
named "fram".
Added documentation of sysfs file.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Link: https://lore.kernel.org/r/20210611094601.95131-2-jiri.prchal@aksignal.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11 12:23:10 +02:00
Mark Rutland
3e00e39d9d arm64: insn: move AARCH64_INSN_SIZE into <asm/insn.h>
For histroical reasons, we define AARCH64_INSN_SIZE in
<asm/alternative-macros.h>, but it would make more sense to do so in
<asm/insn.h>. Let's move it into <asm/insn.h>, and add the necessary
include directives for this.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210609102301.17332-3-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:19:27 +01:00
Mark Rutland
78b92c7337 arm64: insn: decouple patching from insn code
Currently, <asm/insn.h> includes <asm/patching.h>. We intend that
<asm/insn.h> will be usable from userspace, so it doesn't make sense to
include headers for kernel-only features such as the patching routines,
and we'd intended to restrict <asm/insn.h> to instruction encoding
details.

Let's decouple the patching code from <asm/insn.h>, and explicitly
include <asm/patching.h> where it is needed. Since <asm/patching.h>
isn't included from assembly, we can drop the __ASSEMBLY__ guards.

At the same time, sort the kprobes includes so that it's easier to see
what is and isn't incldued.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210609102301.17332-2-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:19:27 +01:00
Qi Liu
64432f0906 arm64: perf: Simplify EVENT ATTR macro in perf_event.c
Use common macro PMU_EVENT_ATTR_ID to simplify ARMV8_EVENT_ATTR

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-8-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:18:41 +01:00
Qi Liu
773510f4d2 drivers/perf: Simplify EVENT ATTR macro in fsl_imx8_ddr_perf.c
Use common macro PMU_EVENT_ATTR_ID to simplify IMX8_DDR_PMU_EVENT_ATTR

Reviewed by Frank Li <Frank .li@nxp.com>

Cc: Frank Li <Frank.li@nxp.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-7-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:18:40 +01:00
Qi Liu
b323dfe02e drivers/perf: Simplify EVENT ATTR macro in xgene_pmu.c
Use common macro PMU_EVENT_ATTR_ID to simplify XGENE_PMU_EVENT_ATTR

Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-6-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:18:40 +01:00
Qi Liu
78b1d3c720 drivers/perf: Simplify EVENT ATTR macro in qcom_l3_pmu.c
Use common macro PMU_EVENT_ATTR_ID to simplify L3CACHE_EVENT_ATTR

Cc: Andy Gross <agross@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-5-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:18:40 +01:00
Qi Liu
0bf2d72988 drivers/perf: Simplify EVENT ATTR macro in qcom_l2_pmu.c
Use common macro PMU_EVENT_ATTR_ID to simplify L2CACHE_EVENT_ATTR

Cc: Andy Gross <agross@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-4-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:18:40 +01:00
Qi Liu
7ac87a8dfb drivers/perf: Simplify EVENT ATTR macro in SMMU PMU driver
Use common macro PMU_EVENT_ATTR_ID to simplify SMMU_EVENT_ATTR

Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-3-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:18:40 +01:00
Qi Liu
f8e6d24144 perf: Add EVENT_ATTR_ID to simplify event attributes
Similar EVENT_ATTR macros are defined in many PMU drivers,
like Arm PMU driver, Arm SMMU PMU driver. So add a generic
macro to simplify code.

Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/1623220863-58233-2-git-send-email-liuqi115@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:18:40 +01:00
Robin Murphy
4c1daba15c perf/smmuv3: Don't trample existing events with global filter
With global filtering, we only allow an event to be scheduled if its
filter settings exactly match those of any existing events, therefore
it is pointless to reapply the filter in that case. Much worse, though,
is that in doing that we trample the event type of counter 0 if it's
already active, and never touch the appropriate PMEVTYPERn so the new
event is likely not counting the right thing either. Don't do that.

CC: stable@vger.kernel.org
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/32c80c0e46237f49ad8da0c9f8864e13c4a803aa.1623153312.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-11 11:15:30 +01:00
Brian Norris
1f9482aa8d mwifiex: bring down link before deleting interface
We can deadlock when rmmod'ing the driver or going through firmware
reset, because the cfg80211_unregister_wdev() has to bring down the link
for us, ... which then grab the same wiphy lock.

nl80211_del_interface() already handles a very similar case, with a nice
description:

        /*
         * We hold RTNL, so this is safe, without RTNL opencount cannot
         * reach 0, and thus the rdev cannot be deleted.
         *
         * We need to do it for the dev_close(), since that will call
         * the netdev notifiers, and we need to acquire the mutex there
         * but don't know if we get there from here or from some other
         * place (e.g. "ip link set ... down").
         */
        mutex_unlock(&rdev->wiphy.mtx);
...

Do similarly for mwifiex teardown, by ensuring we bring the link down
first.

Sample deadlock trace:

[  247.103516] INFO: task rmmod:2119 blocked for more than 123 seconds.
[  247.110630]       Not tainted 5.12.4 #5
[  247.115796] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[  247.124557] task:rmmod           state:D stack:    0 pid: 2119 ppid:  2114 flags:0x00400208
[  247.133905] Call trace:
[  247.136644]  __switch_to+0x130/0x170
[  247.140643]  __schedule+0x714/0xa0c
[  247.144548]  schedule_preempt_disabled+0x88/0xf4
[  247.149714]  __mutex_lock_common+0x43c/0x750
[  247.154496]  mutex_lock_nested+0x5c/0x68
[  247.158884]  cfg80211_netdev_notifier_call+0x280/0x4e0 [cfg80211]
[  247.165769]  raw_notifier_call_chain+0x4c/0x78
[  247.170742]  call_netdevice_notifiers_info+0x68/0xa4
[  247.176305]  __dev_close_many+0x7c/0x138
[  247.180693]  dev_close_many+0x7c/0x10c
[  247.184893]  unregister_netdevice_many+0xfc/0x654
[  247.190158]  unregister_netdevice_queue+0xb4/0xe0
[  247.195424]  _cfg80211_unregister_wdev+0xa4/0x204 [cfg80211]
[  247.201816]  cfg80211_unregister_wdev+0x20/0x2c [cfg80211]
[  247.208016]  mwifiex_del_virtual_intf+0xc8/0x188 [mwifiex]
[  247.214174]  mwifiex_uninit_sw+0x158/0x1b0 [mwifiex]
[  247.219747]  mwifiex_remove_card+0x38/0xa0 [mwifiex]
[  247.225316]  mwifiex_pcie_remove+0xd0/0xe0 [mwifiex_pcie]
[  247.231451]  pci_device_remove+0x50/0xe0
[  247.235849]  device_release_driver_internal+0x110/0x1b0
[  247.241701]  driver_detach+0x5c/0x9c
[  247.245704]  bus_remove_driver+0x84/0xb8
[  247.250095]  driver_unregister+0x3c/0x60
[  247.254486]  pci_unregister_driver+0x2c/0x90
[  247.259267]  cleanup_module+0x18/0xcdc [mwifiex_pcie]

Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/linux-wireless/98392296-40ee-6300-369c-32e16cff3725@gmail.com/
Link: https://lore.kernel.org/linux-wireless/ab4d00ce52f32bd8e45ad0448a44737e@bewaar.me/
Reported-by: Maximilian Luz <luzmaximilian@gmail.com>
Reported-by: dave@bewaar.me
Cc: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Brian Norris <briannorris@chromium.org>
Tested-by: Maximilian Luz <luzmaximilian@gmail.com>
Tested-by: Dave Olsthoorn <dave@bewaar.me>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515024227.2159311-1-briannorris@chromium.org
2021-06-11 13:02:27 +03:00
Srinivas Pandruvada
5d6fbc96bd thermal/drivers/int340x: processor_thermal: Export additional attributes
Export additional attributes:

ddr_data_rate (RO) : Show current DDR (Double Data Rate) data rate.
rfi_restriction (RW) : Show or set current state for RFI (Radio
			Frequency Interference) protection.

These attributes use mailbox commands to get/set information. Here
command codes are:
0x0007: Read RFI restriction
0x0107: Read DDR data rate
0x0008: Write RFI restriction

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517061441.1921901-3-srinivas.pandruvada@linux.intel.com
2021-06-11 11:55:47 +02:00
Srinivas Pandruvada
fb5a6ec803 thermal/drivers/int340x: processor_thermal: Export mailbox interface
Export the mailbox interface to be used by other modules. Also change
command id and response from u8 to u32 data type.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210517061441.1921901-2-srinivas.pandruvada@linux.intel.com
2021-06-11 11:54:42 +02:00
Chunyan Zhang
4d57fd9aea thermal/drivers/sprd: Add missing MODULE_DEVICE_TABLE
MODULE_DEVICE_TABLE is used to extract the device information out of the
driver and builds a table when being compiled. If using this macro,
kernel can find the driver if available when the device is plugged in,
and then loads that driver and initializes the device.

Fixes: 554fdbaf19 ("thermal: sprd: Add Spreadtrum thermal driver support")
Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210512093752.243168-1-zhang.lyra@gmail.com
2021-06-11 11:33:17 +02:00
Finley Xiao
16bee043fc thermal/drivers/rockchip: Support RK3568 SoCs in the thermal driver
The RK3568 SoCs have two Temperature Sensors, channel 0 is for CPU,
channel 1 is for GPU.

Signed-off-by: Finley Xiao <finley.xiao@rock-chips.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20210506175514.168365-5-ezequiel@collabora.com
2021-06-11 11:30:30 +02:00
Benjamin Drung
4c6e097629 media: uvcvideo: Fix pixel format change for Elgato Cam Link 4K
The Elgato Cam Link 4K HDMI video capture card reports to support three
different pixel formats, where the first format depends on the connected
HDMI device.

```
$ v4l2-ctl -d /dev/video0 --list-formats-ext
ioctl: VIDIOC_ENUM_FMT
	Type: Video Capture

	[0]: 'NV12' (Y/CbCr 4:2:0)
		Size: Discrete 3840x2160
			Interval: Discrete 0.033s (29.970 fps)
	[1]: 'NV12' (Y/CbCr 4:2:0)
		Size: Discrete 3840x2160
			Interval: Discrete 0.033s (29.970 fps)
	[2]: 'YU12' (Planar YUV 4:2:0)
		Size: Discrete 3840x2160
			Interval: Discrete 0.033s (29.970 fps)
```

Changing the pixel format to anything besides the first pixel format
does not work:

```
$ v4l2-ctl -d /dev/video0 --try-fmt-video pixelformat=YU12
Format Video Capture:
	Width/Height      : 3840/2160
	Pixel Format      : 'NV12' (Y/CbCr 4:2:0)
	Field             : None
	Bytes per Line    : 3840
	Size Image        : 12441600
	Colorspace        : sRGB
	Transfer Function : Rec. 709
	YCbCr/HSV Encoding: Rec. 709
	Quantization      : Default (maps to Limited Range)
	Flags             :
```

User space applications like VLC might show an error message on the
terminal in that case:

```
libv4l2: error set_fmt gave us a different result than try_fmt!
```

Depending on the error handling of the user space applications, they
might display a distorted video, because they use the wrong pixel format
for decoding the stream.

The Elgato Cam Link 4K responds to the USB video probe
VS_PROBE_CONTROL/VS_COMMIT_CONTROL with a malformed data structure: The
second byte contains bFormatIndex (instead of being the second byte of
bmHint). The first byte is always zero. The third byte is always 1.

The firmware bug was reported to Elgato on 2020-12-01 and it was
forwarded by the support team to the developers as feature request.
There is no firmware update available since then. The latest firmware
for Elgato Cam Link 4K as of 2021-03-23 has MCU 20.02.19 and FPGA 67.

Therefore correct the malformed data structure for this device. The
change was successfully tested with VLC, OBS, and Chromium using
different pixel formats (YUYV, NV12, YU12), resolutions (3840x2160,
1920x1080), and frame rates (29.970 and 59.940 fps).

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Drung <bdrung@posteo.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-11 11:23:56 +02:00
Douglas Anderson
989f77e3fd nvmem: qfprom: Improve the comment about regulator setting
In review feedback Joe Perches found the existing comment
confusing. Let's use something based on the wording proposed by Joe.

Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-10-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11 10:57:58 +02:00
Douglas Anderson
1f7b4d8787 nvmem: core: constify nvmem_cell_read_variable_common() return value
The caller doesn't modify the memory pointed to by the pointer so it
can be const.

Suggested-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-9-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11 10:57:56 +02:00
Rajendra Nayak
c813bb37bd nvmem: qfprom: minor nit fixes
Fix a missed newline, change an 'if' to 'else if' and update
a comment which is stale after the merge of '5a1bea2a: nvmem:
qfprom: Add support for fuseblowing on sc7280'

Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-8-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11 10:57:54 +02:00
Samuel Holland
78a005a22d nvmem: sunxi_sid: Set type to OTP
This device currently reports an "Unknown" type in sysfs.
Since it is an eFuse hardware device, set its type to OTP.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210611083348.20170-7-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11 10:57:52 +02:00
Azhar Shaikh
135794868a thunderbolt: Add support for Intel Alder Lake
Alder Lake has the same integrated Thunderbolt/USB4 controller as
Intel Tiger Lake. By default it is still using firmware based connection
manager so we can use most of the Tiger Lake flows.

Add the Alder Lake PCI IDs to the driver list of supported devices.

Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-11 11:42:54 +03:00
Mika Westerberg
2a8b519ece thunderbolt: No need to include <linux/acpi.h> in usb4_port.c
This include is not needed so drop it.

Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-11 11:42:54 +03:00
Gil Fine
0172e41145 thunderbolt: Poll 10ms for REG_FW_STS_NVM_AUTH_DONE to be set
In Intel Tiger Lake and beyond it takes some time after the force power
is set until the firmware connection manager is ready. So instead of
reading it once we poll it for 10ms before giving up.

Signed-off-by: Gil Fine <gil.fine@intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-11 11:42:54 +03:00
Mika Westerberg
349bfe089d thunderbolt: Add device links only when software connection manager is used
We only need to set up the device links when software connection manager
path is used. The firmware connection manager does not need them and if
they are present they may even cause problems.

Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-11 11:42:54 +03:00
Mika Westerberg
a0d36fa106 thunderbolt: Bond lanes only when dual_link_port != NULL in alloc_dev_default()
We should not dereference ->dual_link_port if it is NULL and lane bonding
is requested. For this reason move lane bonding configuration happen
inside the block where ->dual_link_port != NULL.

Fixes: 54509f5005 ("thunderbolt: Add KUnit tests for path walking")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2021-06-11 11:42:54 +03:00
ChenXiaoSong
1d3156396c x86/sgx: Correct kernel-doc's arg name in sgx_encl_release()
Fix the following kernel-doc warning:

  arch/x86/kernel/cpu/sgx/encl.c:392: warning: Function parameter \
    or member 'ref' not described in 'sgx_encl_release'

 [ bp: Massage commit message. ]

Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210609035510.2083694-1-chenxiaosong2@huawei.com
2021-06-11 10:42:38 +02:00
Takashi Sakamoto
93cd12d6e8 ALSA: bebob: code refactoring for model-dependent quirks
This commit adds enumeration and structure member as code refactoring
regarding to model-dependent quirks.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210611035003.26852-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-11 10:30:16 +02:00
Takashi Sakamoto
82fb3bf92c ALSA: bebob: delete workaround for protocol version 3
In a commit c4d860a0d2 ("ALSA: bebob: loosen up severity of checking
continuity for BeBoB v3 quirk"), a workaround was added for the quirk in
BeBoB protocol version 3 against the discontinuity of data block counter.
As long as seeing with sequence replay for media clock recovery, such
quirk disappears.

This commit deletes the workaround.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210611035003.26852-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-11 10:30:04 +02:00
Takashi Sakamoto
c66c630499 ALSA: bebob: dismiss sleep after breaking connections
In a commit d3eabe939a ("ALSA: bebob: expand sleep just after breaking
connections for protocol version 1"), a workaround was added for a quirk
of freeze in BeBoB protocol version 1. As long as seeing with sequence
replay for media clock recovery, the quirk disappears.

This commit removes the workaround.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210611035003.26852-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-11 10:29:45 +02:00
Tony Lindgren
093a474ce1 ARM: OMAP2+: Block suspend for am3 and am4 if PM is not configured
If the PM related modules are not loaded and PM firmware not configured,
the system suspend fails to resume. Let's fix this by adding initial
platform_suspend_ops to block suspend and warn about missing modules.

When pm33xx and wkup_m3_ipc have been loaded and m3 coprocessor booted
with it's firmware, pm33xx sets up working platform_suspend_ops. Note
that we need to configure at least PM_SUSPEND_STANDBY to have
suspend_set_ops().

Cc: Dave Gerlach <d-gerlach@ti.com>
Cc: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:43:08 +03:00
Alejandro Lucero
a1e029b7a5 ARM: OMAP2+: remove duplicated prototype
The am33xx_init_early prototype is defined twice.

Signed-off-by: Alejandro Lucero <alucero@os3sl.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:41:35 +03:00
Aswath Govindraju
9b11fec734 ARM: dts: am437x: align ti,pindir-d0-out-d1-in property with dt-shema
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.

Fixes: b0b0395154 ("ARM: dts: am43x-epos-evm: set data pin directions for spi0 and spi1")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:35:08 +03:00
Aswath Govindraju
414bfe1d26 ARM: dts: am335x: align ti,pindir-d0-out-d1-in property with dt-shema
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.

Fixes: 444d66fafa ("ARM: dts: add spi wifi support to cm-t335")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:35:02 +03:00
Geert Uytterhoeven
794fd4a55e ARM: dts: dra7x-evm: Drop "ti,pcf8575"
The TI part is equivalent to the NXP part and its compatible value is
not documented in the DT bindings.  All other users of similar I2C GPIO
expanders just use the compatible values of the original NXP parts.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:32:42 +03:00
Lokesh Vutla
6320b2aee8 ARM: dts: am33xx: Drop interrupt property from ecap nodes
Interrupts were never supported by ecap driver and the bindings
were never documented.Therefore drop the entries in preparation
to moving bindings to YAML schema.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:29:10 +03:00
Lokesh Vutla
61edd91c26 ARM: dts: ti: Fix node name for all ecap dt nodes
dtbs_check produces the following warning for ecap node name:
ecap@100: $nodename:0: 'ecap@100' does not match '^pwm(@.*|-[0-9a-f])*$'

Fix this by replacing ecap with pwm in node name

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:29:10 +03:00
Lokesh Vutla
be8c9d7957 ARM: dts: ti: Drop usage of ti,am33xx-ecap from DT nodes
ti,am33xx-ecap is used to represent device nodes using ti,hwmod data.
Now that hwmod entries are entirely removed, drop usage of
ti,am33xx-ecap compatible from all DT nodes.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:29:09 +03:00
Lokesh Vutla
07168bacf8 ARM: dts: ti: drop usage of redundant compatible
Commit 229110c1aa ("ARM: dts: am437x/am33xx/da850: Add new ECAP and
EPWM bindings") added ti,am3352-ehrpwm compatible which is similar to
ti,am33xx-ehrpwm but without out t,hwmod properties. But with commit
58bfbea5b1 ("ARM: dts: am437x/am33xx: Remove hwmod entries for ECAP
and EPWM nodes") dropped support for all ti,hwmod for ehrpwm, but
missed deprecating ti,am33xx-ehrpwm compatible. So drop ti,am33xx-ehrpwm
from DT as it is no longer needed.

ti-ehrpwn driver still support ti,am33xx-ehrpwm in order to maintain
backward compatibility.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:25:55 +03:00
Greg Kroah-Hartman
abd062886c Revert "usb: gadget: fsl: Re-enable driver for ARM SoCs"
This reverts commit e0e8b6abe8.

Turns out this breaks the build.  We had numerous reports of problems
from linux-next and 0-day about this not working properly, so revert it
for now until it can be figured out properly.

The build errors are:
	arm-linux-gnueabi-ld: fsl_udc_core.c:(.text+0x29d4): undefined reference to `fsl_udc_clk_finalize'
	arm-linux-gnueabi-ld: fsl_udc_core.c:(.text+0x2ba8): undefined reference to `fsl_udc_clk_release'
	fsl_udc_core.c:(.text+0x2848): undefined reference to `fsl_udc_clk_init'
	fsl_udc_core.c:(.text+0xe88): undefined reference to `fsl_udc_clk_release'

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: kernel test robot <lkp@intel.com>
Fixes: e0e8b6abe8 ("usb: gadget: fsl: Re-enable driver for ARM SoCs")
Cc: stable <stable@vger.kernel.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Leo Li <leoyang.li@nxp.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ran Wang <ran.wang_1@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11 09:18:47 +02:00
Vignesh Raghavendra
2dbe13dbc1 ARM: dts: omap2/3: Drop dmas property from I2C node
DMA was never supported by i2c-omap driver and the bindings were never
documented. Therefore drop the entries in preparation to moving
bindings to YAML schema.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11 10:16:35 +03:00