On CN10K platform transmit/receive buffer alloc and free from/to
hardware had changed to support burst operation. Whereas pervious
silicon's only support single buffer free at a time.
To Support the same firmware allocates a DRAM region for each PF/VF for
storing LMTLINES. These LMTLINES are used to send CPT commands to HW.
PF/VF LMTST region is accessed via BAR4. PFs LMTST region is followed
by its VFs mbox memory. The size of region varies from 2KB to 256KB
based on number of LMTLINES configured.
This patch adds support for mapping of PF/VF LMTST region.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Mailbox region configuration has some changes on CN10K platform
from OcteonTX2(CN9XX) platform.
On CN10K platform:
The DRAM region allocated to PF is enumerated as PF BAR4 memory.
PF BAR4 contains AF-PF mbox region followed by its VFs mbox region.
AF-PF mbox region base address is configured at RVU_AF_PFX_BAR4_ADDR
PF-VF mailbox base address is configured at
RVU_PF(x)_VF_MBOX_ADDR = RVU_AF_PF()_BAR4_ADDR+64KB. PF access its
mbox region via BAR4, whereas VF accesses PF-VF DRAM mailboxes via
BAR2 indirect access.
On CN9XX platform:
Mailbox region in DRAM is divided into two parts AF-PF mbox region and
PF-VF mbox region i.e all PFs mbox region is contiguous similarly all
VFs.
The base address of the AF-PF mbox region is configured at
RVU_AF_PF_BAR4_ADDR.
AF-PF1 mbox address can be calculated as RVU_AF_PF_BAR4_ADDR * mbox
size.
This patch changes mbox initialization to support both CN9XX and CN10K
platform.
This patch also removes platform specific name from the PF/VF driver name
to make it appropriate for all supported platforms.
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This makes the IXP4xx driver probe from the device tree
and retrieve the NPE and two queue manager handled used
to process crypto from the device tree.
As the crypto engine is topologically a part of the NPE
hardware, we augment the NPE driver to spawn the
crypto engine as a child.
The platform data probe path is going away in due time,
for now it is an isolated else clause.
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This adds device tree bindings for the ixp4xx crypto engine.
Cc: Corentin Labbe <clabbe@baylibre.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The ixp4xx_crypto driver traditionally registers a bare platform
device without attaching it to a driver, and detects the hardware
at module init time by reading an SoC specific hardware register.
Change this to the conventional method of registering the platform
device from the platform code itself when the device is present,
turning the module_init/module_exit functions into probe/release
driver callbacks.
This enables compile-testing as well as potentially having ixp4xx
coexist with other ARMv5 platforms in the same kernel in the future.
Cc: Corentin Labbe <clabbe@baylibre.com>
Tested-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace open coded divisor calculations with the DIV_ROUND_UP kernel
macro for better readability.
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
use pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. this change is just to simplify the code, no
actual functional changes.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use common devm_tegra_core_dev_init_opp_table() helper for the OPP table
initialization.
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use memdup_user_nul() helper instead of open-coding to
simplify the code.
v1-->v2:
fixed patch title error
v2-->v3:
return the actual error
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use common devm_tegra_core_dev_init_opp_table() helper for the OPP table
initialization.
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
There is a spelling mistake in a dev_err message. Fix it.
Acked-by: Eli Billauer <eli.billauer@gmail.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210601102201.8489-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MODULE_VERSION is useless for in-kernel drivers, so these are removed from
files in drivers/char/xillybus/
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210528092242.51104-2-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Xillybus' configuration symbol hierarchy has been reorganized recently,
the correct condition for compiling the xillybus/ subdirectory is now
CONFIG_XILLYBUS_CLASS, and not CONFIG_XILLYBUS.
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Eli Billauer <eli.billauer@gmail.com>
Link: https://lore.kernel.org/r/20210528092242.51104-1-eli.billauer@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Intel AlderLake(ADL) IOM has a different IOM port status offset than
Intel TigerLake.
Add a new ACPI ID for ADL and use the IOM port status offset as per
the platform.
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com>
Link: https://lore.kernel.org/r/20210601035843.71150-1-azhar.shaikh@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The USB charger type and status was already propagated to userspace
through kobject_uevent_env during charger notify work. Nevertheless the
uevent could be lost e.g. because it could be fired at an early kernel
boot stage, way before udev daemon or any other user-space app was able
to catch it. Registering uevent hook for introduced usb_phy_dev_type
will allow to query sysfs 'uevent' file to restore that information at
any time.
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Grzegorz Jaszczyk <grzegorz.jaszczyk@linaro.org>
Link: https://lore.kernel.org/r/20210531122222.453628-1-grzegorz.jaszczyk@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct the order of the descriptions for the "interrupts" property to
match the order of the "interrupt-names" property.
Fixes: 68989fe1c3 ("dt-bindings: usb: Convert cdns-usb3.txt to YAML schema")
Acked-by: Peter Chen <peter.chen@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20210527193952.1705127-1-geert@linux-m68k.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vboxvideo/modesetting.c:11: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/modesetting.c:54: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/modesetting.c:87: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-27-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/vboxvideo/hgsmi_base.c:12: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/hgsmi_base.c:42: warning: expecting prototype for Notify the host of HGSMI(). Prototype was for hgsmi_send_caps_info() instead
drivers/gpu/drm/vboxvideo/hgsmi_base.c:74: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/hgsmi_base.c:102: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/vboxvideo/hgsmi_base.c:174: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-26-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/exynos/exynos_drm_ipp.c:105: warning: expecting prototype for exynos_drm_ipp_ioctl_get_res_ioctl(). Prototype was for exynos_drm_ipp_get_res_ioctl() instead
drivers/gpu/drm/exynos/exynos_drm_ipp.c:153: warning: expecting prototype for exynos_drm_ipp_ioctl_get_caps(). Prototype was for exynos_drm_ipp_get_caps_ioctl() instead
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-25-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/panel/panel-raspberrypi-touchscreen.c:33: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-21-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/ttm/ttm_tt.c:398: warning: Function parameter or member 'num_pages' not described in 'ttm_tt_mgr_init'
drivers/gpu/drm/ttm/ttm_tt.c:398: warning: Function parameter or member 'num_dma32_pages' not described in 'ttm_tt_mgr_init'
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-20-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/nouveau/nvkm/subdev/mc/tu102.c:50:1: warning: no previous prototype for ‘tu102_mc_intr_unarm’ [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/mc/tu102.c:62:1: warning: no previous prototype for ‘tu102_mc_intr_rearm’ [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/mc/tu102.c:74:1: warning: no previous prototype for ‘tu102_mc_intr_mask’ [-Wmissing-prototypes]
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-16-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_hqvdp.c:796: warning: expecting prototype for sti_vdp_vtg_cb(). Prototype was for sti_hqvdp_vtg_cb() instead
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-9-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_tvout.c:166: warning: expecting prototype for Set the clipping mode of a VIP(). Prototype was for tvout_vip_set_color_order() instead
drivers/gpu/drm/sti/sti_tvout.c:187: warning: expecting prototype for Set the clipping mode of a VIP(). Prototype was for tvout_vip_set_clip_mode() instead
drivers/gpu/drm/sti/sti_tvout.c:203: warning: expecting prototype for Set the rounded value of a VIP(). Prototype was for tvout_vip_set_rnd() instead
drivers/gpu/drm/sti/sti_tvout.c:223: warning: expecting prototype for Select the VIP input(). Prototype was for tvout_vip_set_sel_input() instead
drivers/gpu/drm/sti/sti_tvout.c:258: warning: expecting prototype for Select the input video signed or unsigned(). Prototype was for tvout_vip_set_in_vid_fmt() instead
drivers/gpu/drm/sti/sti_tvout.c:274: warning: expecting prototype for Set preformatter matrix(). Prototype was for tvout_preformatter_set_matrix() instead
drivers/gpu/drm/sti/sti_tvout.c:299: warning: expecting prototype for Start VIP block for DVO output(). Prototype was for tvout_dvo_start() instead
drivers/gpu/drm/sti/sti_tvout.c:353: warning: expecting prototype for Start VIP block for HDMI output(). Prototype was for tvout_hdmi_start() instead
drivers/gpu/drm/sti/sti_tvout.c:402: warning: expecting prototype for Start HDF VIP and HD DAC(). Prototype was for tvout_hda_start() instead
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-8-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_hda.c:283: warning: expecting prototype for Search for a video mode in the supported modes table(). Prototype was for hda_get_mode_idx() instead
drivers/gpu/drm/sti/sti_hda.c:301: warning: expecting prototype for Enable the HD DACS(). Prototype was for hda_enable_hd_dacs() instead
drivers/gpu/drm/sti/sti_hda.c:383: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Fabien Dessenne <fabien.dessenne@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-7-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c:77: warning: expecting prototype for Start hdmi phy macro cell tx3g4c28(). Prototype was for sti_hdmi_tx3g4c28phy_start() instead
drivers/gpu/drm/sti/sti_hdmi_tx3g4c28phy.c:187: warning: expecting prototype for Stop hdmi phy macro cell tx3g4c28(). Prototype was for sti_hdmi_tx3g4c28phy_stop() instead
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-6-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'clk' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'regs' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'vblank_cb' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'vblank_cb_data' not described in 'mtk_disp_rdma'
drivers/gpu/drm/mediatek/mtk_disp_rdma.c:72: warning: Function parameter or member 'fifo_size' not described in 'mtk_disp_rdma'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-5-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'clk' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'regs' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'vblank_cb' not described in 'mtk_disp_ovl'
drivers/gpu/drm/mediatek/mtk_disp_ovl.c:83: warning: Function parameter or member 'vblank_cb_data' not described in 'mtk_disp_ovl'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-4-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'clk' not described in 'mtk_disp_gamma'
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'regs' not described in 'mtk_disp_gamma'
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_gamma'
drivers/gpu/drm/mediatek/mtk_disp_gamma.c:42: warning: Function parameter or member 'data' not described in 'mtk_disp_gamma'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-3-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mediatek/mtk_disp_color.c:45: warning: Function parameter or member 'clk' not described in 'mtk_disp_color'
drivers/gpu/drm/mediatek/mtk_disp_color.c:45: warning: Function parameter or member 'regs' not described in 'mtk_disp_color'
drivers/gpu/drm/mediatek/mtk_disp_color.c:45: warning: Function parameter or member 'cmdq_reg' not described in 'mtk_disp_color'
Cc: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602143300.2330146-2-lee.jones@linaro.org
pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/1622442963-54095-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Disabling events silently fails due to the wrong command ID being used.
Instead of the command ID for the disable call, the command ID for the
enable call was being used. This causes the disable call to enable the
event instead. As the event is already enabled when we call this
function, the EC silently drops this command and does nothing.
Use the correct command ID for disabling the event to fix this.
Fixes: c167b9c7e3 ("platform/surface: Add Surface Aggregator subsystem")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210603000636.568846-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Rounding in PELT calculation happening when entities are attached/detached
of a cfs_rq can result into situations where util/runnable_avg is not null
but util/runnable_sum is. This is normally not possible so we need to
ensure that util/runnable_sum stays synced with util/runnable_avg.
detach_entity_load_avg() is the last place where we don't sync
util/runnable_sum with util/runnbale_avg when moving some sched_entities
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210601085832.12626-1-vincent.guittot@linaro.org
When building the kernel wtih gcc-10 or higher using the
CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y flag, the compiler picks a slightly
different set of registers for the inline assembly in cpu_init() that
subsequently results in a corrupt kernel stack as well as remaining in
FIQ mode. If a banked register is used for the last argument, the wrong
version of that register gets loaded into CPSR_c. When building in Arm
mode, the arguments are passed as immediate values and the bug cannot
happen.
This got introduced when Daniel reworked the FIQ handling and was
technically always broken, but happened to work with both clang and gcc
before gcc-10 as long as they picked one of the lower registers.
This is probably an indication that still very few people build the
kernel in Thumb2 mode.
Marek pointed out the problem on IRC, Arnd narrowed it down to this
inline assembly and Russell pinpointed the exact bug.
Change the constraints to force the final mode switch to use a non-banked
register for the argument to ensure that the correct constant gets loaded.
Another alternative would be to always use registers for the constant
arguments to avoid the #ifdef that has now become more complex.
Cc: <stable@vger.kernel.org> # v3.18+
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Reported-by: Marek Vasut <marek.vasut@gmail.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Fixes: c0e7f7ee71 ("ARM: 8150/3: fiq: Replace default FIQ handler")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Kernel test robot throws below warning ->
drivers/net/wireless/intel/ipw2x00/ipw2100.c:5359: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Minor update in documentation.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1619347842-6638-1-git-send-email-jrdr.linux@gmail.com
These TODO empty code are added by
commit 9442e5b58e ("b43: N-PHY: partly implement SPUR workaround"). It's
been more than a decade now. I don't think anyone who wants to perfect
this workaround can follow this TODO tip exactly. Instead, it limits them
to new thinking. Remove it will be better.
No functional change.
By the way, this helps reduce some binary code size.
Before:
text data bss dec hex
74472 9967 0 84439 149d7
After:
text data bss dec hex
74408 9919 0 84327 14967
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511034203.4122-2-thunder.leizhen@huawei.com