Commit graph

1,031,458 commits

Author SHA1 Message Date
Wei Yongjun
373e864cf5 ieee802154: fix error return code in ieee802154_llsec_getparams()
Fix to return negative error code -ENOBUFS from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: 3e9c156e2c ("ieee802154: add netlink interfaces for llsec")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210519141614.3040055-1-weiyongjun1@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2021-06-03 10:59:49 +02:00
Tobias Schramm
da76290fa3 dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf
The RK3308 has a USB GRF.
This patch adds a compatible string for it.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210601164800.7670-3-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-03 10:57:27 +02:00
Johan Jonker
e71ccdff37 dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications. Remove unneeded "#phy-cells" from parent node.
Also sort example.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210601164800.7670-2-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-03 10:57:27 +02:00
Johan Jonker
2fd2300a9c ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.

make ARCH=arm dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210601164800.7670-4-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-03 10:57:05 +02:00
Tobias Schramm
9fcf74b274 arm64: dts: rockchip: add USB support to rk3308.dtsi
The Rockchip RK3308 features an integrated USB 2.0 phy, an USB OTG
controller and OHCI/EHCI interfaces.
This patch adds all of those to the RK3308 dtsi and thereby enables USB
support on the RK3308.

Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210601164800.7670-6-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-03 10:56:38 +02:00
Johan Jonker
8c3d64251a arm64: dts: rockchip: rename nodename for phy-rockchip-inno-usb2
The pattern: "^(|usb-|usb2-|usb3-|pci-|pcie-|sata-)phy(@[0-9a-f,]+)*$"
in phy-provider.yaml has required "#phy-cells" for phy nodes.
The "phy-cells" in rockchip-inno-usb2 nodes are located in subnodes.
Rename the nodename to pattern "usb2phy@[0-9a-f]+$" to prevent
notifications.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=~/.local/lib/python3.5/site-packages/dtschema/schemas/
phy/phy-provider.yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210601164800.7670-5-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-03 10:56:38 +02:00
Shaokun Zhang
281e44f5fd arm64: perf: Add more support on caps under sysfs
Armv8.7 has introduced BUS_SLOTS and BUS_WIDTH in PMMIR_EL1 register,
add two entries in caps for bus_slots and bus_width under sysfs. It
will return the true slots and width if the information is available,
otherwise it will return 0.

Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Link: https://lore.kernel.org/r/1622704502-63951-1-git-send-email-zhangshaokun@hisilicon.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-06-03 09:53:17 +01:00
Chris Morgan
18d5c7bf50 arm64: dts: rockchip: add rk817 codec to Odroid Go
Add the new rk817 codec driver to the Odroid Go Advance.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Tested-by: Maciej Matuszczyk <maccraft123mc@gmail.com>
Link: https://lore.kernel.org/r/20210519203754.27184-5-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-03 10:50:37 +02:00
Zhen Lei
79c6b8ed30 ieee802154: fix error return code in ieee802154_add_iface()
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.

Fixes: be51da0f3e ("ieee802154: Stop using NLA_PUT*().")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20210508062517.2574-1-thunder.leizhen@huawei.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2021-06-03 10:50:08 +02:00
Kees Cook
4dc7c97d04 drm/pl111: depend on CONFIG_VEXPRESS_CONFIG
Avoid randconfig build failures by requiring VEXPRESS_CONFIG:

aarch64-linux-gnu-ld: drivers/gpu/drm/pl111/pl111_versatile.o: in function `pl111_vexpress_clcd_init':
pl111_versatile.c:(.text+0x220): undefined reference to `devm_regmap_init_vexpress_config'

Fixes: 826fc86b59 ("drm: pl111: Move VExpress setup into versatile init")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-4-keescook@chromium.org
2021-06-03 10:48:13 +02:00
Arnd Bergmann
5ea4dba683 drm/msm/a6xx: add CONFIG_QCOM_LLCC dependency
When LLCC support is in a loadable module, the adreno support
cannot be built-in:

aarch64-linux-ld: drivers/gpu/drm/msm/adreno/a6xx_gpu.o: in function `a6xx_gpu_init':
a6xx_gpu.c:(.text+0xe0): undefined reference to `llcc_slice_getd'
a6xx_gpu.c:(.text+0xe0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_getd'
aarch64-linux-ld: a6xx_gpu.c:(.text+0xec): undefined reference to `llcc_slice_getd'
a6xx_gpu.c:(.text+0xec): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_getd'
aarch64-linux-ld: drivers/gpu/drm/msm/adreno/a6xx_gpu.o: in function `a6xx_destroy':
a6xx_gpu.c:(.text+0x274): undefined reference to `llcc_slice_putd'
a6xx_gpu.c:(.text+0x274): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `llcc_slice_putd'
aarch64-linux-ld: a6xx_gpu.c:(.text+0x27c): undefined reference to `llcc_slice_putd'

Add a Kconfig dependency that disallows the broken configuration
but allows all working ones.

Fixes: 474dadb8b0 ("drm/msm/a6xx: Add support for using system cache(LLC)")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210103140407.3917405-1-arnd@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-3-keescook@chromium.org
2021-06-03 10:47:55 +02:00
Kees Cook
f611b1e762 drm: Avoid circular dependencies for CONFIG_FB
When cleaning up other drm config dependencies, it is too easy to create
larger problems. Instead, mark CONFIG_FB as a "depends":

drivers/gpu/drm/Kconfig:74:error: recursive dependency detected!

Suggested-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/lkml/CAK8P3a3jUQs6c5tESSNMbqfuymewj9FhqRizyHcfOXf8Rgy-nA@mail.gmail.com/
Signed-off-by: Kees Cook <keescook@chromium.org>
[danvet: Rebase, the symbol has changed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-2-keescook@chromium.org
2021-06-03 10:47:44 +02:00
Zhen Lei
ff323d6d72 video: fbdev: mb862xx: use DEVICE_ATTR_RO macro
Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the
code a bit shorter and easier to read.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210601090852.10531-1-thunder.leizhen@huawei.com
2021-06-03 10:32:49 +02:00
lijian
c5ef15ae09 video: fbdev: atyfb: mach64_cursor.c: deleted the repeated word
deleted the repeated word 'be' in the comments.

Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210601012747.38884-1-lijian_8010a29@163.com
2021-06-03 10:32:49 +02:00
Alyssa Rosenzweig
95b2151fec drm/sched: Fix inverted comment for hang_limit
The hang_limit is the threshold after which the kernel no longer
attempts to schedule a job. Its documentation stated the opposite due to
a typo. Correct the wording to indicate the actual purpose of the field.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528235152.38447-1-alyssa.rosenzweig@collabora.com
2021-06-03 10:32:49 +02:00
Lee Jones
4a888ba03f drm/vgem/vgem_drv: Standard comment blocks should not use kernel-doc format
Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vgem/vgem_drv.c:47: warning: expecting prototype for This is vgem, a (non-hardware(). Prototype was for DRIVER_NAME() instead

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526084726.552052-31-lee.jones@linaro.org
2021-06-03 10:32:49 +02:00
Daniel Vetter
b970b8e9fb drm/doc: Include fence chain api
We have this nice kerneldoc, but forgot to include it.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210521082457.1656333-1-daniel.vetter@ffwll.ch
2021-06-03 10:32:49 +02:00
Andy Shevchenko
aab53e6756 net: ieee802154: mrf24j40: Drop unneeded of_match_ptr()
Driver can be used in different environments and moreover, when compiled
with !OF, the compiler may issue a warning due to unused mrf24j40_of_match
variable. Hence drop unneeded of_match_ptr() call.

While at it, update headers block to reflect above changes.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210531132226.47081-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2021-06-03 10:32:04 +02:00
Yang Li
ad6f5cc5f6 net/ieee802154: drop unneeded assignment in llsec_iter_devkeys()
In order to keep the code style consistency of the whole file,
redundant return value ‘rc’ and its assignments should be deleted

The clang_analyzer complains as follows:
net/ieee802154/nl-mac.c:1203:12: warning: Although the value stored to
'rc' is used in the enclosing expression, the value is never actually
read from 'rc'

No functional change, only more efficient.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1619346299-40237-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2021-06-03 10:09:36 +02:00
Hui Wang
b8b90c1760 ALSA: hda: update the power_state during the direct-complete
The patch_realtek.c needs to check if the power_state.event equals
PM_EVENT_SUSPEND, after using the direct-complete, the suspend() and
resume() will be skipped if the codec is already rt_suspended, in this
case, the patch_realtek.c will always get PM_EVENT_ON even the system
is really resumed from S3.

We could set power_state to PMSG_SUSPEND in the prepare(), if other
PM functions are called before complete(), those functions will
override power_state; if no other PM functions are called before
complete(), we could know the suspend() and resume() are skipped since
only S3 pm functions could be skipped by direct-complete, in this case
set power_state to PMSG_RESUME in the complete(). This could guarantee
the first time of calling hda_codec_runtime_resume() after complete()
has the correct power_state.

Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210602145424.3132-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-03 09:40:28 +02:00
Takashi Iwai
9c1fe96bde ALSA: timer: Fix master timer notification
snd_timer_notify1() calls the notification to each slave for a master
event, but it passes a wrong event number.  It should be +10 offset,
corresponding to SNDRV_TIMER_EVENT_MXXX, but it's incorrectly with
+100 offset.  Casually this was spotted by UBSAN check via syzkaller.

Reported-by: syzbot+d102fa5b35335a7e544e@syzkaller.appspotmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/000000000000e5560e05c3bd1d63@google.com
Link: https://lore.kernel.org/r/20210602113823.23777-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-03 09:39:58 +02:00
Chaitanya Kulkarni
346ac785ba nvmet: remove a superfluous variable
Remove the superfluous variable "bdev" that is only used once in the
nvmet_bdev_alloc_bip() and use req->ns->bdev that is used everywhere in
the code to access the nvmet request's bdev.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:26 +03:00
Amit Engel
f6e8bd59c4 nvmet: move ka_work initialization to nvmet_alloc_ctrl
Initialize keep-alive work only once, as part of alloc_ctrl
and not each time that nvmet_start_keep_alive_timer is being called

Signed-off-by: Amit Engel <amit.engel@dell.com>
Reviewed-by: Hou Pu <houpu.main@gmail.com>
2021-06-03 10:29:26 +03:00
Christoph Hellwig
f1cf35e17e nvme: remove nvme_{get,put}_ns_from_disk
Now that only one caller is left remove the helpers by restructuring
nvme_pr_command so that it has two helpers for sending a command of to a
given nsid using either the ns_head for multipath, or the namespace
stored in the gendisk.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-06-03 10:29:26 +03:00
Christoph Hellwig
8b4fb0f968 nvme: split nvme_report_zones
Split multipath support out of nvme_report_zones into a separate helper
and simplify the non-multipath version as a result.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-06-03 10:29:26 +03:00
Christoph Hellwig
d8ca66e821 nvme: move the CSI sanity check into nvme_ns_report_zones
Move the CSI check into nvme_ns_report_zones to clean up the code
a little bit and prepare for further refactoring.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-06-03 10:29:25 +03:00
Christoph Hellwig
85b790a7ae nvme: add a sparse annotation to nvme_ns_head_ctrl_ioctl
Add the __releases annotation to tell sparse that nvme_ns_head_ctrl_ioctl
is expected to unlock head->srcu.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-06-03 10:29:25 +03:00
Christoph Hellwig
3e7d1a5516 nvme: open code nvme_put_ns_from_disk in nvme_ns_head_ctrl_ioctl
nvme_ns_head_ctrl_ioctl is always used on multipath nodes, so just call
srcu_read_unlock directly.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-06-03 10:29:25 +03:00
Christoph Hellwig
86b4284d98 nvme: open code nvme_{get,put}_ns_from_disk in nvme_ns_head_ioctl
nvme_ns_head_ioctl is always used on multipath nodes, no need to
deal with the de-multiplexers.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-06-03 10:29:25 +03:00
Christoph Hellwig
f423c85cd3 nvme: open code nvme_put_ns_from_disk in nvme_ns_head_chr_ioctl
nvme_ns_head_chr_ioctl is always used on multipath nodes, so just call
srcu_read_unlock and consolidate the two unlock paths.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
2021-06-03 10:29:25 +03:00
Chaitanya Kulkarni
97ba6931ba nvme-fabrics: remove extra braces
No need to use the braces around ~ operator.

No functionality change in this patch.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:25 +03:00
Chaitanya Kulkarni
6f860c9225 nvme-fabrics: remove an extra comment
Remove the comment at the end of the switch that is not needed as
function is small enough.

No functionality change in this patch.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:25 +03:00
Chaitanya Kulkarni
63d20f54a3 nvme-fabrics: remove extra new lines in the switch
Remove the extra lines in the switch block that is not common practice
in the kernel code.

No functionality change in this patch.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:25 +03:00
Chaitanya Kulkarni
25e1de8c40 nvme-fabrics: fix the kerneldco comment for nvmf_log_connect_error()
Fix the comment style that matches existing code.

No functionality change in this patch.

Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:24 +03:00
Martin Belanger
3ede8f72a9 nvme-tcp: allow selecting the network interface for connections
In our application, we need a way to force TCP connections to go out a
specific IP interface instead of letting Linux select the interface
based on the routing tables.

Add the 'host-iface' option to allow specifying the interface to use.
When the option host-iface is specified, the driver uses the specified
interface to set the option SO_BINDTODEVICE on the TCP socket before
connecting.

This new option is needed in addtion to the existing host-traddr for
the following reasons:

Specifying an IP interface by its associated IP address is less
intuitive than specifying the actual interface name and, in some cases,
simply doesn't work. That's because the association between interfaces
and IP addresses is not predictable. IP addresses can be changed or can
change by themselves over time (e.g. DHCP). Interface names are
predictable [1] and will persist over time. Consider the following
configuration.

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state ...
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 100.0.0.100/24 scope global lo
       valid_lft forever preferred_lft forever
2: enp0s3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ...
    link/ether 08:00:27:21:65:ec brd ff:ff:ff:ff:ff:ff
    inet 100.0.0.100/24 scope global enp0s3
       valid_lft forever preferred_lft forever
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ...
    link/ether 08:00:27:4f:95:5c brd ff:ff:ff:ff:ff:ff
    inet 100.0.0.100/24 scope global enp0s8
       valid_lft forever preferred_lft forever

The above is a VM that I configured with the same IP address
(100.0.0.100) on all interfaces. Doing a reverse lookup to identify the
unique interface associated with 100.0.0.100 does not work here. And
this is why the option host_iface is required. I understand that the
above config does not represent a standard host system, but I'm using
this to prove a point: "We can never know how users will configure
their systems". By te way, The above configuration is perfectly fine
by Linux.

The current TCP implementation for host_traddr performs a
bind()-before-connect(). This is a common construct to set the source
IP address on a TCP socket before connecting. This has no effect on how
Linux selects the interface for the connection. That's because Linux
uses the Weak End System model as described in RFC1122 [2]. On the other
hand, setting the Source IP Address has benefits and should be supported
by linux-nvme. In fact, setting the Source IP Address is a mandatory
FedGov requirement (e.g. connection to a RADIUS/TACACS+ server).
Consider the following configuration.

$ ip addr list dev enp0s8
3: enp0s8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc ...
    link/ether 08:00:27:4f:95:5c brd ff:ff:ff:ff:ff:ff
    inet 192.168.56.101/24 brd 192.168.56.255 scope global enp0s8
       valid_lft 426sec preferred_lft 426sec
    inet 192.168.56.102/24 scope global secondary enp0s8
       valid_lft forever preferred_lft forever
    inet 192.168.56.103/24 scope global secondary enp0s8
       valid_lft forever preferred_lft forever
    inet 192.168.56.104/24 scope global secondary enp0s8
       valid_lft forever preferred_lft forever

Here we can see that several addresses are associated with interface
enp0s8. By default, Linux always selects the default IP address,
192.168.56.101, as the source address when connecting over interface
enp0s8. Some users, however, want the ability to specify a different
source address (e.g., 192.168.56.102, 192.168.56.103, ...). The option
host_traddr can be used as-is to perform this function.

In conclusion, I believe that we need 2 options for TCP connections.
One that can be used to specify an interface (host-iface). And one that
can be used to set the source address (host-traddr). Users should be
allowed to use one or the other, or both, or none. Of course, the
documentation for host_traddr will need some clarification. It should
state that when used for TCP connection, this option only sets the
source address. And the documentation for host_iface should say that
this option is only available for TCP connections.

References:
[1] https://www.freedesktop.org/wiki/Software/systemd/PredictableNetworkInterfaceNames/
[2] https://tools.ietf.org/html/rfc1122

Tested both IPv4 and IPv6 connections.

Signed-off-by: Martin Belanger <martin.belanger@dell.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:24 +03:00
Mario Limonciello
e21e0243e7 nvme-pci: look for StorageD3Enable on companion ACPI device instead
The documentation around the StorageD3Enable property hints that it
should be made on the PCI device.  This is where newer AMD systems set
the property and it's required for S0i3 support.

So rather than look for nodes of the root port only present on Intel
systems, switch to the companion ACPI device for all systems.
David Box from Intel indicated this should work on Intel as well.

Link: https://lore.kernel.org/linux-nvme/YK6gmAWqaRmvpJXb@google.com/T/#m900552229fa455867ee29c33b854845fce80ba70
Link: https://docs.microsoft.com/en-us/windows-hardware/design/component-guidelines/power-management-for-storage-hardware-devices-intro
Fixes: df4f9bc4fb ("nvme-pci: add support for ACPI StorageD3Enable property")
Suggested-by: Liang Prike <Prike.Liang@amd.com>
Acked-by: Raul E Rangel <rrangel@chromium.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: David E. Box <david.e.box@linux.intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:24 +03:00
Alexey Bogoslavsky
ebd8a93aa4 nvme: extend and modify the APST configuration algorithm
The algorithm that was used until now for building the APST configuration
table has been found to produce entries with excessively long ITPT
(idle time prior to transition) for devices declaring relatively long
entry and exit latencies for non-operational power states. This leads
to unnecessary waste of power and, as a result, failure to pass
mandatory power consumption tests on Chromebook platforms.

The new algorithm is based on two predefined ITPT values and two
predefined latency tolerances. Based on these values, as well as on
exit and entry latencies reported by the device, the algorithm looks
for up to 2 suitable non-operational power states to use as primary
and secondary APST transition targets. The predefined values are
supplied to the nvme driver as module parameters:

 - apst_primary_timeout_ms (default: 100)
 - apst_secondary_timeout_ms (default: 2000)
 - apst_primary_latency_tol_us (default: 15000)
 - apst_secondary_latency_tol_us (default: 100000)

The algorithm echoes the approach used by Intel's and Microsoft's drivers
on Windows. The specific default parameter values are also based on those
drivers. Yet, this patch doesn't introduce the ability to dynamically
regenerate the APST table in the event of switching the power source from
AC to battery and back. Adding this functionality may be considered in the
future. In the meantime, the timeouts and tolerances reflect a compromise
between values used by Microsoft for AC and battery scenarios.

In most NVMe devices the new algorithm causes them to implement a more
aggressive power saving policy. While beneficial in most cases, this
sometimes comes at the price of a higher IO processing latency in certain
scenarios as well as at the price of a potential impact on the drive's
endurance (due to more frequent context saving when entering deep non-
operational states). So in order to provide a fallback for systems where
these regressions cannot be tolerated, the patch allows to revert to
the legacy behavior by setting either apst_primary_timeout_ms or
apst_primary_latency_tol_us parameter to 0. Eventually (and possibly after
fine tuning the default values of the module parameters) the legacy behavior
can be removed.

TESTING.

The new algorithm has been extensively tested. Initially, simulations were
used to compare APST tables generated by old and new algorithms for a wide
range of devices. After that, power consumption, performance and latencies
were measured under different workloads on devices from multiple vendors
(WD, Intel, Samsung, Hynix, Kioxia). Below is the description of the tests
and the findings.

General observations.
The effect the patch has on the APST table varies depending on the entry and
exit latencies advertised by the devices. For some devices, the effect is
negligible (e.g. Kioxia KBG40ZNS), for some significant, making the
transitions to PS3 and PS4 much quicker (e.g. WD SN530, Intel 760P), or making
the sleep deeper, PS4 rather than PS3 after a similar amount of time (e.g.
SK Hynix BC511). For some devices (e.g. Samsung PM991) the effect is mixed:
the initial transition happens after a longer idle time, but takes the device
to a lower power state.

Workflows.
In order to evaluate the patch's effect on the power consumption and latency,
7 workflows were used for each device. The workflows were designed to test
the scenarios where significant differences between the old and new behaviors
are most likely. Each workflow was tested twice: with the new and with the
old APST table generation implementation. Power consumption, performance and
latency were measured in the process. The following workflows were used:
1) Consecutive write at the maximum rate with IO depth of 2, with no pauses
2) Repeated pattern of 1000 consecutive writes of 4K packets followed by 50ms
   idle time
3) Repeated pattern of 1000 consecutive writes of 4K packets followed by 150ms
   idle time
4) Repeated pattern of 1000 consecutive writes of 4K packets followed by 500ms
   idle time
5) Repeated pattern of 1000 consecutive writes of 4K packets followed by 1.5s
   idle time
6) Repeated pattern of 1000 consecutive writes of 4K packets followed by 5s
   idle time
7) Repeated pattern of a single random read of a 4K packet followed by 150ms
   idle time

Power consumption
Actual power consumption measurements produced predictable results in
accordance with the APST mechanism's theory of operation.
Devices with long entry and exit latencies such as WD SN530 showed huge
improvement on scenarios 4,5 and 6 of up to 62%. Devices such as Kioxia
KBG40ZNS where the resulting APST table looks virtually identical with
both legacy and new algorithms, showed little or no change in the average power
consumption on all workflows. Devices with extra short latencies such as
Samsung PM991 showed moderate increase in power consumption of up to 18% in
worst case scenarios.
In addition, on Intel and Samsung devices a more complex impact was observed
on scenarios 3, 4 and 7. Our understanding is that due to longer stay in deep
non-operational states between the writes the devices start performing background
operations leading to an increase of power consumption. With the old APST tables
part of these operations are delayed until the scenario is over and a longer idle
period begins, but eventually this extra power is consumed anyway.

Performance.
In terms of performance measured on sustained write or read scenarios, the
effect of the patch is minimal as in this case the device doesn't enter low power
states.

Latency
As expected, in devices where the patch causes a more aggressive power saving
policy (e.g. WD SN530, Intel 760P), an increase in latency was observed in
certain scenarios. Workflow number 7, specifically designed to simulate the
worst case scenario as far as latency is concerned, indeed shows a sharp
increase in average latency (~2ms -> ~53ms on Intel 760P and 0.6 -> 10ms on
WD SN530). The latency increase on other workloads and other devices is much
milder or non-existent.

Signed-off-by: Alexey Bogoslavsky <alexey.bogoslavsky@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:24 +03:00
Colin Ian King
13ce7e625a nvme: remove redundant initialization of variable ret
The variable ret is being initialized with a value that is never read,
it is being updated later on. The assignment is redundant and can be
removed.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-06-03 10:29:24 +03:00
Jiapeng Chong
99b18e88a1 dmaengine: idxd: Fix missing error code in idxd_cdev_open()
The error code is missing in this code scenario, add the error code
'-EINVAL' to the return value 'rc'.

Eliminate the follow smatch warning:

drivers/dma/idxd/cdev.c:113 idxd_cdev_open() warn: missing error code
'rc'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/1622628446-87909-1-git-send-email-jiapeng.chong@linux.alibaba.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03 12:28:37 +05:30
Troy Lee
8dec60e7b8 ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
Aspeed AST2600 u-boot requires 600KiB+ flash space. Sharing the same
openbmc-flash-layout-64.dtsi requires to resize the flash partition.

The updated flash layout as follows:
- u-boot: 896 KiB
- u-boot-env: 128 KiB
- kernel: 9MiB
- rofs: 32 MiB
- rwfs: 22 MiB

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20210316085932.2601-1-troy_lee@aspeedtech.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-03 16:19:50 +09:30
Quan Nguyen
959ff7f6f4 ARM: dts: aspeed: mtjade: switch to 64MB flash layout
As the 32MB flash layout will soon be exhausted, switch to 64MB layout.

Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-4-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-03 16:19:50 +09:30
Quan Nguyen
73a89a96f5 ARM: dts: aspeed: mtjade: Add PSU support
Enable PSU support on Ampere's Mt. Jade BMC.

Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-3-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-03 16:19:50 +09:30
Quan Nguyen
9e8cf4b4f9 ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
Enable OCP card support on Ampere's Mt. Jade BMC.

Signed-off-by: Quan Nguyen <quan@os.amperecomputing.com>
Signed-off-by: Phong Vo <phong@os.amperecomputing.com>
Signed-off-by: Thang Q. Nguyen <thang@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20210517040036.13667-2-quan@os.amperecomputing.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-03 16:19:49 +09:30
Anusha Srivatsa
3ed131e5a4 drm/i915/dmc: Move struct intel_dmc to intel_dmc.h
Move struct intel_dmc from i915_drv.h to intel_dmc.h.

v2: Add includes along with moving the struct.

Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-4-anusha.srivatsa@intel.com
2021-06-02 23:19:06 -07:00
Anusha Srivatsa
03256487fe drm/i915/dmc: Add intel_dmc_has_payload() helper
We check for dmc_payload being there at various points in the driver.
Replace it with the helper.

v2: rebased.
v3: Move intel_dmc to intel_dmc.h in another patch (Lucas)
v4: Remove headers not needed from intel_dmc.h

Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-3-anusha.srivatsa@intel.com
2021-06-02 23:19:04 -07:00
Anusha Srivatsa
ec7dfdfce1 drm/i915/dmc: s/DRM_ERROR/drm_err
Use new format of debug messages across intel_csr.

While at it, change some function definitions which now
need dev_priv for drm_err and drm_info etc.

v2: use container_of() (Jani)
v3: Indentation fixes. (Jani)

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526220256.4097-2-anusha.srivatsa@intel.com
2021-06-02 23:19:02 -07:00
Mauro Carvalho Chehab
1ed9e566f3 MAINTAINERS: update marvell,armada-3700-utmi-phy.yaml reference
Changeset 6569d83863 ("dt-bindings: phy: convert phy-mvebu-utmi to YAML schema")
renamed: Documentation/devicetree/bindings/phy/phy-mvebu-utmi.txt
to: Documentation/devicetree/bindings/phy/marvell,armada-3700-utmi-phy.yaml.

Update its cross-reference accordingly.

Fixes: 6569d83863 ("dt-bindings: phy: convert phy-mvebu-utmi to YAML schema")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9342a88ed44726a1cc405470c834d746d4d0524c.1622648507.git.mchehab+huawei@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03 11:41:44 +05:30
Yang Yingliang
d1ce245fe4 phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210603051014.2674744-1-yangyingliang@huawei.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03 11:18:19 +05:30
Sergio Paracuellos
d6e9e8e5dd phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable
The of_device_id is included unconditionally by of.h header and used
in the driver as well. Remove of_match_ptr to fix W=1 compile test
warning with !CONFIG_OF:

drivers/phy/ralink/phy-mt7621-pci.c:341:34: warning: unused variable 'mt7621_pci_phy_ids' [-Wunused-const-variable]

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20210603043219.32646-1-sergio.paracuellos@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-06-03 11:18:14 +05:30
Joel Stanley
239566b032 ARM: dts: aspeed: Set earlycon boot argument
Most of the aspeed boards have copied the 'earlyprink' string in
the bootargs. However, there's no earlyprink driver configured in the
defconfigs, so this does nothing.

A combination of setting stdout in the chosen node and adding earlycon
to bootargs causes early serial output to appear early. This changes all
boards to use this option.

The console=ttyS4,115200 option is still required, as this is used by
the run time uart driver.

Signed-off-by: Joel Stanley <joel@jms.id.au>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Acked-by: Alexander Filippov <a.filippov@yadro.com>
Link: https://lore.kernel.org/r/20210526051220.136432-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-06-03 15:17:02 +09:30