Commit graph

1,031,458 commits

Author SHA1 Message Date
Hans Verkuil
3d37ef41be media: cobalt: fix race condition in setting HPD
The cobalt_s_bit_sysctrl reads the old register value over PCI,
then changes a bit and sets writes the new value to the register.

This is used among other things for setting the HPD output pin.

But if the HPD is changed for multiple inputs at the same time,
then this causes a race condition where a stale value is read.

Serialize this function with a mutex.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:39 +02:00
Hans Verkuil
b2cd0b31ed media: rtl2832_sdr/vivid/airspy/hackrf/msi2500: drop memset of fmt.sdr.reserved
The V4L2 core already zeroes fmt.sdr.reserved, so there is no need for
drivers to do the same.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:39 +02:00
Pavel Skripkin
be8656e62e media: cpia2: fix memory leak in cpia2_usb_probe
syzbot reported leak in cpia2 usb driver. The problem was
in invalid error handling.

v4l2_device_register() is called in cpia2_init_camera_struct(), but
all error cases after cpia2_init_camera_struct() did not call the
v4l2_device_unregister()

Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:39 +02:00
Sebastian Fricke
27ba44270b media: rkisp1: rkisp1-params.c: Fix typos
s/when the camera active/when the camera is active/
s/thus not isr protection/therefore there is no need to acquire a lock/

Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:39 +02:00
Sebastian Fricke
71c4151812 media: rkisp1: rksip1-capture.c: Improve comments and fix typos
Improve the wording of the function description to increase readability.

Fix three typos:
s/during processing a frame/while processing a frame/
s/it also update/it also updates/
s/there's not buf in shadow/there's no buffer in a shadow register/

Replace the abbreviation 'buf' with the full word buffer, the
abbreviation 'config' with the verb configure, and 'regs' with registers.
The goal of this change is to ease the reading flow of the comment.

Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:39 +02:00
Sebastian Fricke
b07006ff93 media: mc: mc-entity.c: Fix typo
s/entity in the other end/entity at the other end/

[hverkuil: also remove the spurious space after 'link']

Signed-off-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:39 +02:00
Colin Ian King
4eb48acac1 media: s2255drv: remove redundant assignment to variable field
The variable 'field' is being assigned a value this is never read,
it is being updated in all the following if/else combinations. The
assignment is redundant and can be removed.

Addresses-Coverity: ("Unused value")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:39 +02:00
Deepak R Varma
637959f7e2 media: staging: media: atomisp: remove unnecessary pr_info calls
pr_info() messages to log function entry / exit tracing spams the log.
Such basic tracing is not necessary and be removed.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Deepak R Varma
2dfc978ac0 media: staging: media: atomisp: replace raw pr_*() by dev_dbg()
It is recommended to use driver model diagnostic macros dev_*() instead
of raw printk() or pr_*() since the former ensures that the log messages
are always associated with the corresponding device and driver. This also
addresses the checkpatch complain for not using KERN_<LEVEL> facility in
printk() call.

Suggested-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Deepak R Varma
4c999ae366 media: staging: media: atomisp: fix CamelCase variable naming
Mixed case variable names are discouraged and they result in checkpatch
script "Avoid CamelCase" warnings. Replace such CamelCase variable names
by lower case strings according to the coding style guidelines.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Deepak R Varma
f50559f0c9 media: staging: media: atomisp: reformat code comment blocks
Reformat code comment blocks according to the coding style guidelines.
This resolves different checkpatch script WARNINGs around block comments.

[hverkuil: fixed up one missed '/* text' comment as reported by Fabio]

Suggested-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Deepak R Varma
21837c2c27 media: staging: media: atomisp: remove unnecessary braces
According to the coding style guidelines, if...else blocks with single
instructions do not need enclosing braces. This resolves checkpatch
WARNING / CHECK complaints.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Deepak R Varma
43692e9e1b media: staging: media: atomisp: balance braces around if...else block
Balance braces around the if else blocks as per the code style guidelines.
Add braces to branches where it is missing. Resolves checkpatch script
CHECK / WARNING feedback messages.

Signed-off-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
684e025c71 media: staging: media: atomisp: Fix line split style issues
Fix line split issues and resolve adjacent extra parens.

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
58a328830e media: staging: media: atomisp: Refactor ia_css_stream_load()
Move the support check to the beginning of the function.
Change the logic to avoid multiple nesting blocks.
Move 'err' variable assignment outside of the if statement.
Remove an unnecessary check whether 'j' is zero.

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
7796e45517 media: staging: media: atomisp: Fix alignment and line length issues
Fix alignment style issues and adjacent line length issues in sh_css.c

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
d4bc34d182 media: staging: media: atomisp: Replace if else clause with a ternary
Use the ternary operator for conditional variable assignment in
create_host_video_pipeline().

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
9d63454732 media: staging: media: atomisp: Remove a superfluous else clause in sh_css.c
Remove a superfluous else clause in ia_css_pipe_check_format()

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
dfdd8ceb6f media: staging: media: atomisp: Remove all redundant assertions in sh_css.c
Remove the remainder of assert() in places where the condition is
already handled.

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
7394bf6d3c media: staging: media: atomisp: Fix the rest of sh_css.c brace issues
Fix the remainder of brace coding style issues.

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
c0633711b0 media: staging: media: atomisp: Remove redundant assertions in sh_css.c
Remove assert() in places where the condition is already handled.

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Martiros Shakhzadyan
6ceb557604 media: staging: media: atomisp: Fix sh_css.c brace coding style issues
Fix brace coding style issues.

Signed-off-by: Martiros Shakhzadyan <vrzh@vrzh.net>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Aline Santana Cordeiro
049eda0749 media: staging: media: tegra-video: Align line break to match with the open parenthesis in file vi.c
Align line break to match with the open parenthesis.
Issue detected by checkpatch.pl.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:38 +02:00
Aline Santana Cordeiro
d1ca04c476 media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_v4l2.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:37 +02:00
Aline Santana Cordeiro
41d1f1b039 media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_subdev.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:37 +02:00
Aline Santana Cordeiro
b6465b1d74 media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_compat_css20.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:37 +02:00
Aline Santana Cordeiro
0a016c35a3 media: staging: media: atomisp: pci: Balance braces around conditional statements in file atomisp_cmd.c
Balance braces around conditional statements.
Issue detected by checkpatch.pl.
It happens in if-else statements where one of the commands
uses braces around a block of code and the other command
does not since it has just a single line of code.

Signed-off-by: Aline Santana Cordeiro <alinesantanacordeiro@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:37 +02:00
Simon Rettberg
023dfa9602 drm/i915/gt: Disable HiZ Raw Stall Optimization on broken gen7
When resetting CACHE_MODE registers, don't enable HiZ Raw Stall
Optimization on Ivybridge GT1 and Baytrail, as it causes severe glitches
when rendering any kind of 3D accelerated content.
This optimization is disabled on these platforms by default according to
official documentation from 01.org.

Fixes: ef99a60ffd ("drm/i915/gt: Clear CACHE_MODE prior to clearing residuals")
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3081
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3404
BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/3071
Reviewed-by: Manuel Bentele <development@manuel-bentele.de>
Signed-off-by: Simon Rettberg <simon.rettberg@rz.uni-freiburg.de>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo removed invalid Fixes line]
Link: https://patchwork.freedesktop.org/patch/msgid/20210426161124.2b7fd708@dellnichtsogutkiste
(cherry picked from commit 929b734ad3)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-19 10:10:28 +03:00
Lu Baolu
54c80d9074 iommu/vt-d: Use user privilege for RID2PASID translation
When first-level page tables are used for IOVA translation, we use user
privilege by setting U/S bit in the page table entry. This is to make it
consistent with the second level translation, where the U/S enforcement
is not available. Clear the SRE (Supervisor Request Enable) field in the
pasid table entry of RID2PASID so that requests requesting the supervisor
privilege are blocked and treated as DMA remapping faults.

Fixes: b802d070a5 ("iommu/vt-d: Use iova over first level")
Suggested-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210512064426.3440915-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20210519015027.108468-3-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-05-19 08:51:02 +02:00
Dan Carpenter
1a590a1c8b iommu/vt-d: Check for allocation failure in aux_detach_device()
In current kernels small allocations never fail, but checking for
allocation failure is the correct thing to do.

Fixes: 18abda7a2d ("iommu/vt-d: Fix general protection fault in aux_detach_device()")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/YJuobKuSn81dOPLd@mwanda
Link: https://lore.kernel.org/r/20210519015027.108468-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-05-19 08:51:02 +02:00
Chris Wilson
036867e93e drm/i915/gem: Pin the L-shape quirked object as unshrinkable
When instantiating a tiled object on an L-shaped memory machine, we mark
the object as unshrinkable to prevent the shrinker from trying to swap
out the pages. We have to do this as we do not know the swizzling on the
individual pages, and so the data will be scrambled across swap out/in.

Not only do we need to move the object off the shrinker list, we need to
mark the object with shrink_pin so that the counter is consistent across
calls to madvise.

v2: in the madvise ioctl we need to check if the object is currently
shrinkable/purgeable, not if the object type supports shrinking

Fixes: 0175969e48 ("drm/i915/gem: Use shrinkable status for unknown swizzle quirks")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3293
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3450
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v5.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20210517084640.18862-1-matthew.auld@intel.com
(cherry picked from commit 8777d17b68)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2021-05-19 09:50:08 +03:00
James Smart
a7d139145a nvme-fc: clear q_live at beginning of association teardown
The __nvmf_check_ready() routine used to bounce all filesystem io if the
controller state isn't LIVE.  However, a later patch changed the logic so
that it rejection ends up being based on the Q live check.  The FC
transport has a slightly different sequence from rdma and tcp for
shutting down queues/marking them non-live.  FC marks its queue non-live
after aborting all ios and waiting for their termination, leaving a
rather large window for filesystem io to continue to hit the transport.
Unfortunately this resulted in filesystem I/O or applications seeing I/O
errors.

Change the FC transport to mark the queues non-live at the first sign of
teardown for the association (when I/O is initially terminated).

Fixes: 73a5379937 ("nvme-fabrics: allow to queue requests for live queues")
Signed-off-by: James Smart <jsmart2021@gmail.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-19 08:40:24 +02:00
Keith Busch
a0fdd14180 nvme-tcp: rerun io_work if req_list is not empty
A possible race condition exists where the request to send data is
enqueued from nvme_tcp_handle_r2t()'s will not be observed by
nvme_tcp_send_all() if it happens to be running. The driver relies on
io_work to send the enqueued request when it is runs again, but the
concurrently running nvme_tcp_send_all() may not have released the
send_mutex at that time. If no future commands are enqueued to re-kick
the io_work, the request will timeout in the SEND_H2C state, resulting
in a timeout error like:

  nvme nvme0: queue 1: timeout request 0x3 type 6

Ensure the io_work continues to run as long as the req_list is not empty.

Fixes: db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq context")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-19 08:33:42 +02:00
Sagi Grimberg
825619b09a nvme-tcp: fix possible use-after-completion
Commit db5ad6b7f8 ("nvme-tcp: try to send request in queue_rq
context") added a second context that may perform a network send.
This means that now RX and TX are not serialized in nvme_tcp_io_work
and can run concurrently.

While there is correct mutual exclusion in the TX path (where
the send_mutex protect the queue socket send activity) RX activity,
and more specifically request completion may run concurrently.

This means we must guarantee that any mutation of the request state
related to its lifetime, bytes sent must not be accessed when a completion
may have possibly arrived back (and processed).

The race may trigger when a request completion arrives, processed
_and_ reused as a fresh new request, exactly in the (relatively short)
window between the last data payload sent and before the request iov_iter
is advanced.

Consider the following race:
1. 16K write request is queued
2. The nvme command and the data is sent to the controller (in-capsule
   or solicited by r2t)
3. After the last payload is sent but before the req.iter is advanced,
   the controller sends back a completion.
4. The completion is processed, the request is completed, and reused
   to transfer a new request (write or read)
5. The new request is queued, and the driver reset the request parameters
   (nvme_tcp_setup_cmd_pdu).
6. Now context in (2) resumes execution and advances the req.iter

==> use-after-completion as this is already a new request.

Fix this by making sure the request is not advanced after the last
data payload send, knowing that a completion may have arrived already.

An alternative solution would have been to delay the request completion
or state change waiting for reference counting on the TX path, but besides
adding atomic operations to the hot-path, it may present challenges in
multi-stage R2T scenarios where a r2t handler needs to be deferred to
an async execution.

Reported-by: Narayan Ayalasomayajula <narayan.ayalasomayajula@wdc.com>
Tested-by: Anil Mishra <anil.mishra@wdc.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Cc: stable@vger.kernel.org # v5.8+
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-19 08:33:42 +02:00
Wu Bo
03504e3b54 nvme-loop: fix memory leak in nvme_loop_create_ctrl()
When creating loop ctrl in nvme_loop_create_ctrl(), if nvme_init_ctrl()
fails, the loop ctrl should be freed before jumping to the "out" label.

Fixes: 3a85a5de29 ("nvme-loop: add a NVMe loopback host driver")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-19 08:33:42 +02:00
Wu Bo
fec356a61a nvmet: fix memory leak in nvmet_alloc_ctrl()
When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger
than cntlid_max of the subsystem, and jumps to the
"out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed.
Fix this by jumping to the "out_free_sqs" label.

Fixes: 94a39d61f8 ("nvmet: make ctrl-id configurable")
Signed-off-by: Wu Bo <wubo40@huawei.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2021-05-19 08:33:39 +02:00
Jakub Kicinski
e63052a5dd mlx5e: add add missing BH locking around napi_schdule()
It's not correct to call napi_schedule() in pure process
context. Because we use __raise_softirq_irqoff() we require
callers to be in a context which will eventually lead to
softirq handling (hardirq, bh disabled, etc.).

With code as is users will see:

 NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!

Fixes: a8dd7ac12f ("net/mlx5e: Generalize RQ activation")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:55 -07:00
Ariel Levkovich
6ff51ab8aa net/mlx5: Set term table as an unmanaged flow table
Termination tables are restricted to have the default miss action and
cannot be set to forward to another table in case of a miss.
If the fs prio of the termination table is not the last one in the
list, fs_core will attempt to attach it to another table.

Set the unmanaged ft flag when creating the termination table ft
and select the tc offload prio for it to prevent fs_core from selecting
the forwarding to next ft miss action and use the default one.

In addition, set the flow that forwards to the termination table to
ignore ft level restrictions since the ft level is not set by fs_core
for unamanged fts.

Fixes: 249ccc3c95 ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Ariel Levkovich <lariel@nvidia.com>
2021-05-18 23:01:53 -07:00
Leon Romanovsky
75e8564e91 net/mlx5: Don't overwrite HCA capabilities when setting MSI-X count
During driver probe of device that has dynamic MSI-X feature enabled,
the following error is printed in some FW flavour (not released yet).

 mlx5_core 0000:06:00.0: firmware version: 4.7.4387
 mlx5_core 0000:06:00.0: 126.016 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x16 link)
 mlx5_core 0000:06:00.0: mlx5_cmd_check:777:(pid 70599): SET_HCA_CAP(0x109) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x0)
 mlx5_core 0000:06:00.0: set_hca_cap:622:(pid 70599): handle_hca_cap failed
 mlx5_core 0000:06:00.0: mlx5_function_setup:1045:(pid 70599): set_hca_cap failed
 mlx5_core 0000:06:00.0: probe_one:1465:(pid 70599): mlx5_init_one failed with error code -22
 mlx5_core: probe of 0000:06:00.0 failed with error -22

In order to make the setting capability of MSI-X future proof, let's
query the current capabilities first.

Fixes: 604774add5 ("net/mlx5: Dynamically assign MSI-X vectors count")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:51 -07:00
Eli Cohen
7c9f131f36 {net,vdpa}/mlx5: Configure interface MAC into mpfs L2 table
net/mlx5: Expose MPFS configuration API

MPFS is the multi physical function switch that bridges traffic between
the physical port and any physical functions associated with it. The
driver is required to add or remove MAC entries to properly forward
incoming traffic to the correct physical function.

We export the API to control MPFS so that other drivers, such as
mlx5_vdpa are able to add MAC addresses of their network interfaces.

The MAC address of the vdpa interface must be configured into the MPFS L2
address. Failing to do so could cause, in some NIC configurations, failure
to forward packets to the vdpa network device instance.

Fix this by adding calls to update the MPFS table.

CC: <mst@redhat.com>
CC: <jasowang@redhat.com>
CC: <virtualization@lists.linux-foundation.org>
Fixes: 1a86b377aa ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices")
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:48 -07:00
Aya Levin
5e7923acbd net/mlx5e: Fix error path of updating netdev queues
Avoid division by zero in the error flow. In the driver TC number can be
either 1 or 8. When TC count is set to 1, driver zero netdev->num_tc.
Hence, need to convert it back from 0 to 1 in the error flow.

Fixes: fa3748775b ("net/mlx5e: Handle errors from netif_set_real_num_{tx,rx}_queues")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:46 -07:00
Vlad Buslov
7d1a3d08c8 net/mlx5e: Reject mirroring on source port change encap rules
Rules with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE dest flag are
translated to destination FT in eswitch. Currently it is not possible to
mirror such rules because firmware doesn't support mixing FT and Vport
destinations in single rule when one of them adds encapsulation. Since the
only use case for MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE destination is
support for tunnel endpoints on VF and trying to offload such rule with
mirror action causes either crash in fs_core or firmware error with
syndrome 0xff6a1d, reject all such rules in mlx5 TC layer.

Fixes: 10742efc20 ("net/mlx5e: VF tunnel TX traffic offloading")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:43 -07:00
Dima Chumak
97817fcc68 net/mlx5e: Fix multipath lag activation
When handling FIB_EVENT_ENTRY_REPLACE event for a new multipath route,
lag activation can be missed if a stale (struct lag_mp)->mfi pointer
exists, which was associated with an older multipath route that had been
removed.

Normally, when a route is removed, it triggers mlx5_lag_fib_event(),
which handles FIB_EVENT_ENTRY_DEL and clears mfi pointer. But, if
mlx5_lag_check_prereq() condition isn't met, for example when eswitch is
in legacy mode, the fib event is skipped and mfi pointer becomes stale.

Fix by resetting mfi pointer to NULL every time mlx5_lag_mp_init() is
called.

Fixes: 544fe7c2e6 ("net/mlx5e: Activate HW multipath and handle port affinity based on FIB events")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:41 -07:00
Saeed Mahameed
77ecd10d0a net/mlx5e: reset XPS on error flow if netdev isn't registered yet
mlx5e_attach_netdev can be called prior to registering the netdevice:
Example stack:

ipoib_new_child_link ->
ipoib_intf_init->
rdma_init_netdev->
mlx5_rdma_setup_rn->

mlx5e_attach_netdev->
mlx5e_num_channels_changed ->
mlx5e_set_default_xps_cpumasks ->
netif_set_xps_queue ->
__netif_set_xps_queue -> kmalloc

If any later stage fails at any point after mlx5e_num_channels_changed()
returns, XPS allocated maps will never be freed as they
are only freed during netdev unregistration, which will never happen for
yet to be registered netdevs.

Fixes: 3909a12e79 ("net/mlx5e: Fix configuration of XPS cpumasks and netdev queues in corner cases")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2021-05-18 23:01:38 -07:00
Roi Dayan
eb96cc1592 net/mlx5e: Make sure fib dev exists in fib event
For unreachable route entry the fib dev does not exists.

Fixes: 8914add2c9 ("net/mlx5e: Handle FIB events to update tunnel endpoint device")
Reported-by: Dennis Afanasev <dennis.afanasev@stateless.net>
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:36 -07:00
Roi Dayan
83026d8318 net/mlx5e: Fix null deref accessing lag dev
It could be the lag dev is null so stop processing the event.
In bond_enslave() the active/backup slave being set before setting the
upper dev so first event is without an upper dev.
After setting the upper dev with bond_master_upper_dev_link() there is
a second event and in that event we have an upper dev.

Fixes: 7e51891a23 ("net/mlx5e: Use netdev events to set/del egress acl forward-to-vport rule")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:34 -07:00
Dima Chumak
fe7738eb3c net/mlx5e: Fix nullptr in mlx5e_tc_add_fdb_flow()
The result of __dev_get_by_index() is not checked for NULL, which then
passed to mlx5e_attach_encap() and gets dereferenced.

Also, in case of a successful lookup, the net_device reference count is
not incremented, which may result in net_device pointer becoming invalid
at any time during mlx5e_attach_encap() execution.

Fix by using dev_get_by_index(), which does proper reference counting on
the net_device pointer. Also, handle nullptr return value when mirred
device is not found.

It's safe to call dev_put() on the mirred net_device pointer, right
after mlx5e_attach_encap() call, because it's not being saved/copied
down the call chain.

Fixes: 3c37745ec6 ("net/mlx5e: Properly deal with encap flows add/del under neigh update")
Addresses-Coverity: ("Dereference null return value")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Vlad Buslov <vladbu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:31 -07:00
Parav Pandit
82041634d9 net/mlx5: SF, Fix show state inactive when its inactivated
When a SF is inactivated and when it is in a TEARDOWN_REQUEST
state, driver still returns its state as active. This is incorrect.
Fix it by treating TEARDOWN_REQEUST as inactive state. When a SF
is still attached to the driver, on user request to reactivate EINVAL
error is returned. Inform user about it with better code EBUSY and
informative error message.

Fixes: 6a32732174 ("net/mlx5: SF, Port function state change support")
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Vu Pham <vuhuong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:29 -07:00
Roi Dayan
fca086617a net/mlx5: Fix err prints and return when creating termination table
Fix print to print correct error code and not using IS_ERR() which
will just result in always printing 1.
Also return real err instead of always -EOPNOTSUPP.

Fixes: 10caabdaad ("net/mlx5e: Use termination table for VLAN push actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:26 -07:00
Jianbo Liu
442b3d7b67 net/mlx5: Set reformat action when needed for termination rules
For remote mirroring, after the tunnel packets are received, they are
decapsulated and sent to representor, then re-encapsulated and sent
out over another tunnel. So reformat action is set only when the
destination is required to do encapsulation.

Fixes: 249ccc3c95 ("net/mlx5e: Add support for offloading traffic from uplink to uplink")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-18 23:01:24 -07:00