Commit graph

1,031,458 commits

Author SHA1 Message Date
Alexei Starovoitov
5d67f34959 bpf: Add cmd alias BPF_PROG_RUN
Add BPF_PROG_RUN command as an alias to BPF_RPOG_TEST_RUN to better
indicate the full range of use cases done by the command.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210519014032.20908-1-alexei.starovoitov@gmail.com
2021-05-19 15:35:12 +02:00
Adrian Hunter
c954eb72b3 perf intel-pt: Fix sample instruction bytes
The decoder reports the current instruction if it was decoded. In some
cases the current instruction is not decoded, in which case the instruction
bytes length must be set to zero. Ensure that is always done.

Note perf script can anyway get the instruction bytes for any samples where
they are not present.

Also note, that there is a redundant "ptq->insn_len = 0" statement which is
not removed until a subsequent patch in order to make this patch apply
cleanly to stable branches.

Example:

A machne that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.

 # for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
 rtm

Test program:

 #include <stdio.h>
 #include <immintrin.h>

 int main()
 {
        int x = 0;

        if (_xbegin() == _XBEGIN_STARTED) {
                x = 1;
                _xabort(1);
        } else {
                printf("x = %d\n", x);
        }
        return 0;
 }

Compile with -mrtm i.e.

 gcc -Wall -Wextra -mrtm xabort.c -o xabort

Record:

 perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort

Before:

 # perf script --itrace=xe -F+flags,+insn,-period --xed --ns
          xabort  1478 [007] 92161.431348581:   transactions:   x                              400b81 main+0x14 (/root/xabort)          mov $0xffffffff, %eax
          xabort  1478 [007] 92161.431348624:   transactions:   tx abrt                        400b93 main+0x26 (/root/xabort)          mov $0xffffffff, %eax

After:

 # perf script --itrace=xe -F+flags,+insn,-period --xed --ns
          xabort  1478 [007] 92161.431348581:   transactions:   x                              400b81 main+0x14 (/root/xabort)          xbegin 0x6
          xabort  1478 [007] 92161.431348624:   transactions:   tx abrt                        400b93 main+0x26 (/root/xabort)          xabort $0x1

Fixes: faaa87680b ("perf intel-pt/bts: Report instruction bytes and length in sample")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-19 10:33:43 -03:00
Axel Lin
687c9e3b1a
regulator: Check ramp_delay_table for regulator_set_ramp_delay_regmap
Return -EINVAL if ramp_delay_table is NULL.
Also add WARN_ON since the driver code needs fix if this happened.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210519132255.1683863-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:31:43 +01:00
Adrian Hunter
cb7987837c perf intel-pt: Fix transaction abort handling
When adding support for power events, some handling of FUP packets was
unified. That resulted in breaking reporting of TSX aborts, by not
considering the associated TIP packet. Fix that.

Example:

A machine that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.

 # for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
 rtm

Test program:

 #include <stdio.h>
 #include <immintrin.h>

 int main()
 {
        int x = 0;

        if (_xbegin() == _XBEGIN_STARTED) {
                x = 1;
                _xabort(1);
        } else {
                printf("x = %d\n", x);
        }
        return 0;
 }

Compile with -mrtm i.e.

 gcc -Wall -Wextra -mrtm xabort.c -o xabort

Record:

 perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort

Before:

 # perf script --itrace=be -F+flags,+addr,-period,-event --ns
          xabort  1478 [007] 92161.431348552:   tr strt                             0 [unknown] ([unknown]) =>           400b6d main+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431348624:   jmp                            400b96 main+0x29 (/root/xabort) =>           400bae main+0x41 (/root/xabort)
          xabort  1478 [007] 92161.431348624:   return                         400bb4 main+0x47 (/root/xabort) =>           400b87 main+0x1a (/root/xabort)
          xabort  1478 [007] 92161.431348637:   jcc                            400b8a main+0x1d (/root/xabort) =>           400b98 main+0x2b (/root/xabort)
          xabort  1478 [007] 92161.431348644:   tr end  call                   400ba9 main+0x3c (/root/xabort) =>           40f690 printf+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431360859:   tr strt                             0 [unknown] ([unknown]) =>           400bae main+0x41 (/root/xabort)
          xabort  1478 [007] 92161.431360882:   tr end  return                 400bb4 main+0x47 (/root/xabort) =>           401139 __libc_start_main+0x309 (/root/xabort)

After:

 # perf script --itrace=be -F+flags,+addr,-period,-event --ns
          xabort  1478 [007] 92161.431348552:   tr strt                             0 [unknown] ([unknown]) =>           400b6d main+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431348624:   tx abrt                        400b93 main+0x26 (/root/xabort) =>           400b87 main+0x1a (/root/xabort)
          xabort  1478 [007] 92161.431348637:   jcc                            400b8a main+0x1d (/root/xabort) =>           400b98 main+0x2b (/root/xabort)
          xabort  1478 [007] 92161.431348644:   tr end  call                   400ba9 main+0x3c (/root/xabort) =>           40f690 printf+0x0 (/root/xabort)
          xabort  1478 [007] 92161.431360859:   tr strt                             0 [unknown] ([unknown]) =>           400bae main+0x41 (/root/xabort)
          xabort  1478 [007] 92161.431360882:   tr end  return                 400bb4 main+0x47 (/root/xabort) =>           401139 __libc_start_main+0x309 (/root/xabort)

Fixes: a472e65fc4 ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-19 10:31:04 -03:00
Thomas Richter
316a76a58c perf test: Fix libpfm4 support (63) test error for nested event groups
Compiling perf with make LIBPFM4=1 includes libpfm support and
enables test case 63 'Test libpfm4 support'. This test reports an error
on all platforms for subtest 63.2 'test groups of --pfm-events'.
The reported error message is 'nested event groups not supported'

 # ./perf test -F 63
 63: Test libpfm4 support                                            :
 63.1: test of individual --pfm-events                               :
 Error:
 failed to parse event stereolab : event not found
 Error:
 failed to parse event stereolab,instructions : event not found
 Error:
 failed to parse event instructions,stereolab : event not found
  Ok
 63.2: test groups of --pfm-events                                   :
 Error:
 nested event groups not supported    <------ Error message here
 Error:
 failed to parse event {stereolab} : event not found
 Error:
 failed to parse event {instructions,cycles},{instructions,stereolab} :\
	 event not found
 Ok
 #

This patch addresses the error message 'nested event groups not supported'.
The root cause is function parse_libpfm_events_option() which parses the
event string '{},{instructions}' and can not handle a leading empty
group notation '{},...'.

The code detects the first (empty) group indicator '{' but does not
terminate group processing on the following group closing character '}'.
So when the second group indicator '{' is detected, the code assumes
a nested group and returns an error.

With the error message fixed, also change the expected event number to
one for the test case to succeed.

While at it also fix a memory leak. In good case the function does not
free the duplicated string given as first parameter.

Output after:
 # ./perf test -F 63
 63: Test libpfm4 support                                            :
 63.1: test of individual --pfm-events                               :
 Error:
 failed to parse event stereolab : event not found
 Error:
 failed to parse event stereolab,instructions : event not found
 Error:
 failed to parse event instructions,stereolab : event not found
  Ok
 63.2: test groups of --pfm-events                                   :
 Error:
 failed to parse event {stereolab} : event not found
 Error:
 failed to parse event {instructions,cycles},{instructions,stereolab} : \
	 event not found
  Ok
 #
Error message 'nested event groups not supported' is gone.

Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Acked-By: Ian Rogers <irogers@google.com>
Acked-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20210517140931.2559364-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-19 10:30:37 -03:00
Daniel Borkmann
3d43167768 Merge branch 'bpf-loader-progs'
Alexei Starovoitov says:

====================
v5->v6:
- fixed issue found by bpf CI. The light skeleton generation was
  doing a dry-run of loading the program where all actual sys_bpf syscalls
  were replaced by calls into gen_loader. Turned out that search for valid
  vmlinux_btf was not stubbed out which was causing light skeleton gen
  to fail on older kernels.
- significantly reduced verbosity of gen_loader.c.
- an example trace_printk.lskel.h generated out of progs/trace_printk.c
  https://gist.github.com/4ast/774ea58f8286abac6aa8e3bf3bf3b903

v4->v5:
- addressed a bunch of minor comments from Andrii.
- the main difference is that lskel is now more robust in case of errors
  and a bit cleaner looking.

v3->v4:
- cleaned up closing of temporary FDs in case intermediate sys_bpf fails during
  execution of loader program.
- added support for rodata in the skeleton.
- enforce bpf_prog_type_syscall to be sleepable, since it needs bpf_copy_from_user
  to populate rodata map.
- converted test trace_printk to use lskel to test rodata access.
- various small bug fixes.

v2->v3: Addressed comments from Andrii and John.
- added support for setting max_entries after signature verification
  and used it in ringbuf test, since ringbuf's max_entries has to be updated
  after skeleton open() and before load(). See patch 20.
- bpf_btf_find_by_name_kind doesn't take btf_fd anymore.
  Because of that removed attach_prog_fd from bpf_prog_desc in lskel.
  Both features to be added later.
- cleaned up closing of fd==0 during loader gen by resetting fds back to -1.
- converted loader gen to use memset(&attr, cmd_specific_attr_size).
  would love to see this optimization in the rest of libbpf.
- fixed memory leak during loader_gen in case of enomem.
- support for fd_array kernel feature is added in patch 9 to have
  exhaustive testing across all selftests and then partially reverted
  in patch 15 to keep old style map_fd patching tested as well.
- since fentry_test/fexit_tests were extended with re-attach had to add
  support for per-program attach method in lskel and use it in the tests.
- cleanup closing of fds in lskel in case of partial failures.
- fixed numerous small nits.

v1->v2: Addressed comments from Al, Yonghong and Andrii.
- documented sys_close fdget/fdput requirement and non-recursion check.
- reduced internal api leaks between libbpf and bpftool.
  Now bpf_object__gen_loader() is the only new libbf api with minimal fields.
- fixed light skeleton __destroy() method to munmap and close maps and progs.
- refactored bpf_btf_find_by_name_kind to return btf_id | (btf_obj_fd << 32).
- refactored use of bpf_btf_find_by_name_kind from loader prog.
- moved auto-gen like code into skel_internal.h that is used by *.lskel.h
  It has minimal static inline bpf_load_and_run() method used by lskel.
- added lksel.h example in patch 15.
- replaced union bpf_map_prog_desc with struct bpf_map_desc and struct bpf_prog_desc.
- removed mark_feat_supported and added a patch to pass 'obj' into kernel_supports.
- added proper tracking of temporary FDs in loader prog and their cleanup via bpf_sys_close.
- rename gen_trace.c into gen_loader.c to better align the naming throughout.
- expanded number of available helpers in new prog type.
- added support for raw_tp attaching in lskel.
  lskel supports tracing and raw_tp progs now.
  It correctly loads all networking prog types too, but __attach() method is tbd.
- converted progs/test_ksyms_module.c to lskel.
- minor feedback fixes all over.

The description of V1 set is still valid:

This is a first step towards signed bpf programs and the third approach of that kind.
The first approach was to bring libbpf into the kernel as a user-mode-driver.
The second approach was to invent a new file format and let kernel execute
that format as a sequence of syscalls that create maps and load programs.
This third approach is using new type of bpf program instead of inventing file format.
1st and 2nd approaches had too many downsides comparing to this 3rd and were discarded
after months of work.

To make it work the following new concepts are introduced:
1. syscall bpf program type
A kind of bpf program that can do sys_bpf and sys_close syscalls.
It can only execute in user context.

2. FD array or FD index.
Traditionally BPF instructions are patched with FDs.
What it means that maps has to be created first and then instructions modified
which breaks signature verification if the program is signed.
Instead of patching each instruction with FD patch it with an index into array of FDs.
That makes the program signature stable if it uses maps.

3. loader program that is generated as "strace of libbpf".
When libbpf is loading bpf_file.o it does a bunch of sys_bpf() syscalls to
load BTF, create maps, populate maps and finally load programs.
Instead of actually doing the syscalls generate a trace of what libbpf
would have done and represent it as the "loader program".
The "loader program" consists of single map and single bpf program that
does those syscalls.
Executing such "loader program" via bpf_prog_test_run() command will
replay the sequence of syscalls that libbpf would have done which will result
the same maps created and programs loaded as specified in the elf file.
The "loader program" removes libelf and majority of libbpf dependency from
program loading process.

4. light skeleton
Instead of embedding the whole elf file into skeleton and using libbpf
to parse it later generate a loader program and embed it into "light skeleton".
Such skeleton can load the same set of elf files, but it doesn't need
libbpf and libelf to do that. It only needs few sys_bpf wrappers.

Future steps:
- support CO-RE in the kernel. This patch set is already too big,
  so that critical feature is left for the next step.
- generate light skeleton in golang to allow such users use BTF and
  all other features provided by libbpf
- generate light skeleton for kernel, so that bpf programs can be embeded
  in the kernel module. The UMD usage in bpf_preload will be replaced with
  such skeleton, so bpf_preload would become a standard kernel module
  without user space dependency.
- finally do the signing of the loader program.

The patches are work in progress with few rough edges.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2021-05-19 15:27:42 +02:00
Liming Sun
1c0e5701c5 platform/mellanox: mlxbf-tmfifo: Fix a memory barrier issue
The virtio framework uses wmb() when updating avail->idx. It
guarantees the write order, but not necessarily loading order
for the code accessing the memory. This commit adds a load barrier
after reading the avail->idx to make sure all the data in the
descriptor is visible. It also adds a barrier when returning the
packet to virtio framework to make sure read/writes are visible to
the virtio code.

Fixes: 1357dfd726 ("platform/mellanox: Add TmFifo driver for Mellanox BlueField Soc")
Signed-off-by: Liming Sun <limings@nvidia.com>
Reviewed-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/1620433812-17911-1-git-send-email-limings@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Maximilian Luz
9795d8232a platform/surface: dtx: Fix poll function
The poll function should not return -ERESTARTSYS.

Furthermore, locking in this function is completely unnecessary. The
ddev->lock protects access to the main device and controller (ddev->dev
and ddev->ctrl), ensuring that both are and remain valid while being
accessed by clients. Both are, however, never accessed in the poll
function. The shutdown test (via atomic bit flags) be safely done
without locking, so drop locking here entirely.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 1d60999283 ("platform/surface: Add DTX driver)
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210513134437.2431022-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Maximilian Luz
773fe1d744 platform/surface: aggregator: Add platform-drivers-x86 list to MAINTAINERS entry
The Surface System Aggregator Module driver entry is currently missing a
mailing list. Surface platform drivers are discussed on the
platform-driver-x86 list and all other Surface platform drivers have a
reference to that list in their entries. So let's add one here as well.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210514221954.5976-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Arnd Bergmann
ba6e1d8422 platform/surface: aggregator: avoid clang -Wconstant-conversion warning
Clang complains about the assignment of SSAM_ANY_IID to
ssam_device_uid->instance:

drivers/platform/surface/surface_aggregator_registry.c:478:25: error: implicit conversion from 'int' to '__u8' (aka 'unsigned char') changes value from 65535 to 255 [-Werror,-Wconstant-conversion]
        { SSAM_VDEV(HUB, 0x02, SSAM_ANY_IID, 0x00) },
        ~                      ^~~~~~~~~~~~
include/linux/surface_aggregator/device.h:71:23: note: expanded from macro 'SSAM_ANY_IID'
 #define SSAM_ANY_IID            0xffff
                                ^~~~~~
include/linux/surface_aggregator/device.h:126:63: note: expanded from macro 'SSAM_VDEV'
        SSAM_DEVICE(SSAM_DOMAIN_VIRTUAL, SSAM_VIRTUAL_TC_##cat, tid, iid, fun)
                                                                     ^~~
include/linux/surface_aggregator/device.h:102:41: note: expanded from macro 'SSAM_DEVICE'
        .instance = ((iid) != SSAM_ANY_IID) ? (iid) : 0,                        \
                                               ^~~

The assignment doesn't actually happen, but clang checks the type limits
before checking whether this assignment is reached. Replace the ?:
operator with a __builtin_choose_expr() invocation that avoids the
warning for the untaken part.

Fixes: eb0e90a820 ("platform/surface: aggregator: Add dedicated bus and device type")
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210514200453.1542978-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Maximilian Luz
647e6cc979 platform/surface: aggregator: Do not mark interrupt as shared
Having both IRQF_NO_AUTOEN and IRQF_SHARED set causes
request_threaded_irq() to return with -EINVAL (see comment in flag
validation in that function). As the interrupt is currently not shared
between multiple devices, drop the IRQF_SHARED flag.

Fixes: 507cf5a2f1 ("platform/surface: aggregator: move to use request_irq by IRQF_NO_AUTOEN flag")
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20210505133635.1499703-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-05-19 15:24:52 +02:00
Axel Lin
79c7e1447c
regulator: fan53555: Cleanup unused define and redundant assignment
TCS_VSEL_NSEL_MASK is not used so remove it.
Also remove redundant assignment for di->slew_reg.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210517010318.1027949-2-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:12 +01:00
Axel Lin
a7f003147b
regulator: fan53555: Fix slew_shift setting for tcs4525
Fix trivial copy-paste mistake.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20210517010318.1027949-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:11 +01:00
Sander Vanheule
1f89d2fe16
regmap: Add MDIO bus support
Basic support for MDIO bus access. Support only includes clause-22
register access, with 5-bit addresses, and 16-bit wide registers.

Signed-off-by: Sander Vanheule <sander@svanheule.net>
Link: https://lore.kernel.org/r/63b99a2fec2c4ea3c461d59d451af8d675ecf312.1621279162.git.sander@svanheule.net
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:10 +01:00
Gyeongtaek Lee
8b4ba1d317
ASoC: soc-dai: fix up hw params only if it is needed
If fixed hw params won't be used, fixing up isn't needed also.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
Link: https://lore.kernel.org/r/000401d748bc$fa466d50$eed347f0$@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:08 +01:00
Rafał Miłecki
11480dbfe1
ASoC: wm8750: convert to the json-schema
This helps validating DTS files.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210512205926.780-1-zajec5@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:07 +01:00
Neil Armstrong
7487238c5f
ASoC: meson: g12a-toacodec: add support for SM1 TOACODEC
This adds support for the TOACODEC found in Amlogic SM1 SoCs.

The bits are shifted for more selection of clock sources, so this only
maps the same support for G12A to the SM1 bits.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-3-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:05 +01:00
Neil Armstrong
172dd9216d
ASoC: meson: g12a-toacodec: use regmap fields to prepare SM1 support
Switch usage to regmap field for bits handled by the g12a_toacodec_mux_put_enum()
function to avoid uselesss code duplication when adding SM1 variant support.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20210511074829.4110036-2-narmstrong@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:19:04 +01:00
Ranjani Sridharan
8c08652614
ASoC: SOF: Intel: hda: don't send DAI_CONFIG IPC for older firmware
BE hw_params op was recently added for SSP type DAIs.
But sending the DAI_CONFIG IPC during hw_params
is not supported with older firmware. So add an ABI check
to avoid sending the IPC if the firmware ABI is older than
3.18.

Fixes: e12be9fbfb ('ASoC: SOF: Intel: HDA: add hw params callback for SSP DAIs')
Tested-by: Yong Zhi <yong.zhi@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20210518174121.151601-1-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-05-19 14:18:00 +01:00
Richard Fitzgerald
ef04d4ff4b selftests: lib: Add wrapper script for test_scanf
Adds a wrapper shell script for the test_scanf module.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-4-rf@opensource.cirrus.com
2021-05-19 15:05:11 +02:00
Richard Fitzgerald
50f530e176 lib: test_scanf: Add tests for sscanf number conversion
Adds test_sscanf to test various number conversion cases, as
number conversion was previously broken.

This also tests the simple_strtoxxx() functions exported from
vsprintf.c.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-3-rf@opensource.cirrus.com
2021-05-19 15:05:11 +02:00
Richard Fitzgerald
900fdc4573 lib: vsprintf: Fix handling of number field widths in vsscanf
The existing code attempted to handle numbers by doing a strto[u]l(),
ignoring the field width, and then repeatedly dividing to extract the
field out of the full converted value. If the string contains a run of
valid digits longer than will fit in a long or long long, this would
overflow and no amount of dividing can recover the correct value.

This patch fixes vsscanf() to obey number field widths when parsing
the number.

A new _parse_integer_limit() is added that takes a limit for the number
of characters to parse. The number field conversion in vsscanf is changed
to use this new function.

If a number starts with a radix prefix, the field width  must be long
enough for at last one digit after the prefix. If not, it will be handled
like this:

 sscanf("0x4", "%1i", &i): i=0, scanning continues with the 'x'
 sscanf("0x4", "%2i", &i): i=0, scanning continues with the '4'

This is consistent with the observed behaviour of userland sscanf.

Note that this patch does NOT fix the problem of a single field value
overflowing the target type. So for example:

  sscanf("123456789abcdef", "%x", &i);

Will not produce the correct result because the value obviously overflows
INT_MAX. But sscanf will report a successful conversion.

Note that where a very large number is used to mean "unlimited", the value
INT_MAX is used for consistency with the behaviour of vsnprintf().

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-2-rf@opensource.cirrus.com
2021-05-19 15:05:11 +02:00
Richard Fitzgerald
11b3dda5e8 lib: vsprintf: scanf: Negative number must have field width > 1
If a signed number field starts with a '-' the field width must be > 1,
or unlimited, to allow at least one digit after the '-'.

This patch adds a check for this. If a signed field starts with '-'
and field_width == 1 the scanf will quit.

It is ok for a signed number field to have a field width of 1 if it
starts with a digit. In that case the single digit can be converted.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210514161206.30821-1-rf@opensource.cirrus.com
2021-05-19 15:05:11 +02:00
Luca Ceresoli
5258f7eed4 mfd: lp87565: Move LP87565_regulator_id to .c file
This enum is used only internally to the regulator driver for buck indexes.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-19 13:34:00 +01:00
Luca Ceresoli
c06a40e951 mfd: lp87565: Fix typo in define names
"GOIO" should be "GPIO" here.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2021-05-19 13:33:49 +01:00
Nathan Chancellor
0024430e92 x86/build: Fix location of '-plugin-opt=' flags
Commit b33fff07e3 ("x86, build: allow LTO to be selected") added a
couple of '-plugin-opt=' flags to KBUILD_LDFLAGS because the code model
and stack alignment are not stored in LLVM bitcode.

However, these flags were added to KBUILD_LDFLAGS prior to the
emulation flag assignment, which uses ':=', so they were overwritten
and never added to $(LD) invocations.

The absence of these flags caused misalignment issues in the
AMDGPU driver when compiling with CONFIG_LTO_CLANG, resulting in
general protection faults.

Shuffle the assignment below the initial one so that the flags are
properly passed along and all of the linker flags stay together.

At the same time, avoid any future issues with clobbering flags by
changing the emulation flag assignment to '+=' since KBUILD_LDFLAGS is
already defined with ':=' in the main Makefile before being exported for
modification here as a result of commit:

  ce99d0bf31 ("kbuild: clear LDFLAGS in the top Makefile")

Fixes: b33fff07e3 ("x86, build: allow LTO to be selected")
Reported-by: Anthony Ruhier <aruhier@mailbox.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Anthony Ruhier <aruhier@mailbox.org>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1374
Link: https://lore.kernel.org/r/20210518190106.60935-1-nathan@kernel.org
2021-05-19 13:05:53 +02:00
Masahiro Yamada
1699949d33 sched: Fix a stale comment in pick_next_task()
fair_sched_class->next no longer exists since commit:

  a87e749e8f ("sched: Remove struct sched_class::next field").

Now the sched_class order is specified by the linker script.

Rewrite the comment in a more generic way.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20210519063709.323162-1-masahiroy@kernel.org
2021-05-19 13:03:21 +02:00
Chang S. Bae
8919f07276 selftest/x86/signal: Include test cases for validating sigaltstack
The test measures the kernel's signal delivery with different (enough vs.
insufficient) stack sizes.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-7-chang.seok.bae@intel.com
2021-05-19 12:45:07 +02:00
Chang S. Bae
2beb4a53fc x86/signal: Detect and prevent an alternate signal stack overflow
The kernel pushes context on to the userspace stack to prepare for the
user's signal handler. When the user has supplied an alternate signal
stack, via sigaltstack(2), it is easy for the kernel to verify that the
stack size is sufficient for the current hardware context.

Check if writing the hardware context to the alternate stack will exceed
it's size. If yes, then instead of corrupting user-data and proceeding with
the original signal handler, an immediate SIGSEGV signal is delivered.

Refactor the stack pointer check code from on_sig_stack() and use the new
helper.

While the kernel allows new source code to discover and use a sufficient
alternate signal stack size, this check is still necessary to protect
binaries with insufficient alternate signal stack size from data
corruption.

Fixes: c2bc11f10a ("x86, AVX-512: Enable AVX-512 States Context Switch")
Reported-by: Florian Weimer <fweimer@redhat.com>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-6-chang.seok.bae@intel.com
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153531
2021-05-19 12:40:30 +02:00
Chang S. Bae
bdf6c8b84a selftest/sigaltstack: Use the AT_MINSIGSTKSZ aux vector if available
The SIGSTKSZ constant may not represent enough stack size in some
architectures as the hardware state size grows.

Use getauxval(AT_MINSIGSTKSZ) to increase the stack size.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-5-chang.seok.bae@intel.com
2021-05-19 12:38:17 +02:00
Chang S. Bae
1c33bb0507 x86/elf: Support a new ELF aux vector AT_MINSIGSTKSZ
Historically, signal.h defines MINSIGSTKSZ (2KB) and SIGSTKSZ (8KB), for
use by all architectures with sigaltstack(2). Over time, the hardware state
size grew, but these constants did not evolve. Today, literal use of these
constants on several architectures may result in signal stack overflow, and
thus user data corruption.

A few years ago, the ARM team addressed this issue by establishing
getauxval(AT_MINSIGSTKSZ). This enables the kernel to supply a value
at runtime that is an appropriate replacement on current and future
hardware.

Add getauxval(AT_MINSIGSTKSZ) support to x86, analogous to the support
added for ARM in

  94b07c1f8c ("arm64: signal: Report signal frame size to userspace via auxv").

Also, include a documentation to describe x86-specific auxiliary vectors.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-4-chang.seok.bae@intel.com
2021-05-19 12:18:45 +02:00
Chang S. Bae
939ef71329 x86/signal: Introduce helpers to get the maximum signal frame size
Signal frames do not have a fixed format and can vary in size when a number
of things change: supported XSAVE features, 32 vs. 64-bit apps, etc.

Add support for a runtime method for userspace to dynamically discover
how large a signal stack needs to be.

Introduce a new variable, max_frame_size, and helper functions for the
calculation to be used in a new user interface. Set max_frame_size to a
system-wide worst-case value, instead of storing multiple app-specific
values.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: H.J. Lu <hjl.tools@gmail.com>
Link: https://lkml.kernel.org/r/20210518200320.17239-3-chang.seok.bae@intel.com
2021-05-19 11:46:27 +02:00
Chang S. Bae
7cd60e43a6 uapi/auxvec: Define the aux vector AT_MINSIGSTKSZ
Define AT_MINSIGSTKSZ in the generic uapi header. It is already used
as generic ABI in glibc's generic elf.h, and this define will prevent
future namespace conflicts. In particular, x86 is also using this
generic definition.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Len Brown <len.brown@intel.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20210518200320.17239-2-chang.seok.bae@intel.com
2021-05-19 11:40:15 +02:00
Thomas Gleixner
006ae1970a Merge branch 'irq/affinity' into irq/core
Merge the export of irq_set_affinity() which is a standalone commit so it
can be pulled into other trees.
2021-05-19 11:04:47 +02:00
Thomas Gleixner
4d80d6ca5d genirq: Export affinity setter for modules
Perf modules abuse irq_set_affinity_hint() to set the affinity of system
PMU interrupts just because irq_set_affinity() was not exported.

The fact that irq_set_affinity_hint() actually sets the affinity is a
non-documented side effect and the name is clearly saying it's a hint.

To clean this up, export the real affinity setter.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/r/20210518093117.968251441@linutronix.de
2021-05-19 11:01:51 +02:00
Jiri Slaby
155591d3ce USB: serial: make usb_serial_driver::chars_in_buffer return uint
tty_operations::chars_in_buffer is being switched to return uint. Do the
same for usb_serial_driver's chars_in_buffer.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[ johan: amend commit message ]
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-05-19 10:56:41 +02:00
Jiri Slaby
94cc7aeaf6 USB: serial: make usb_serial_driver::write_room return uint
Line disciplines expect a positive value or zero returned from
tty->ops->write_room (invoked by tty_write_room). Both of them are being
updated to return an unsigned int. Switch also
usb_serial_driver::write_room and all its users.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
[ johan: amend commit message, drop unrelated comment change ]
Signed-off-by: Johan Hovold <johan@kernel.org>
2021-05-19 10:56:40 +02:00
Qais Yousef
93b7385870 sched/uclamp: Fix locking around cpu_util_update_eff()
cpu_cgroup_css_online() calls cpu_util_update_eff() without holding the
uclamp_mutex or rcu_read_lock() like other call sites, which is
a mistake.

The uclamp_mutex is required to protect against concurrent reads and
writes that could update the cgroup hierarchy.

The rcu_read_lock() is required to traverse the cgroup data structures
in cpu_util_update_eff().

Surround the caller with the required locks and add some asserts to
better document the dependency in cpu_util_update_eff().

Fixes: 7226017ad3 ("sched/uclamp: Fix a bug in propagating uclamp value in new cgroups")
Reported-by: Quentin Perret <qperret@google.com>
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-3-qais.yousef@arm.com
2021-05-19 10:53:02 +02:00
Qais Yousef
0c18f2ecfc sched/uclamp: Fix wrong implementation of cpu.uclamp.min
cpu.uclamp.min is a protection as described in cgroup-v2 Resource
Distribution Model

	Documentation/admin-guide/cgroup-v2.rst

which means we try our best to preserve the minimum performance point of
tasks in this group. See full description of cpu.uclamp.min in the
cgroup-v2.rst.

But the current implementation makes it a limit, which is not what was
intended.

For example:

	tg->cpu.uclamp.min = 20%

	p0->uclamp[UCLAMP_MIN] = 0
	p1->uclamp[UCLAMP_MIN] = 50%

	Previous Behavior (limit):

		p0->effective_uclamp = 0
		p1->effective_uclamp = 20%

	New Behavior (Protection):

		p0->effective_uclamp = 20%
		p1->effective_uclamp = 50%

Which is inline with how protections should work.

With this change the cgroup and per-task behaviors are the same, as
expected.

Additionally, we remove the confusing relationship between cgroup and
!user_defined flag.

We don't want for example RT tasks that are boosted by default to max to
change their boost value when they attach to a cgroup. If a cgroup wants
to limit the max performance point of tasks attached to it, then
cpu.uclamp.max must be set accordingly.

Or if they want to set different boost value based on cgroup, then
sysctl_sched_util_clamp_min_rt_default must be used to NOT boost to max
and set the right cpu.uclamp.min for each group to let the RT tasks
obtain the desired boost value when attached to that group.

As it stands the dependency on !user_defined flag adds an extra layer of
complexity that is not required now cpu.uclamp.min behaves properly as
a protection.

The propagation model of effective cpu.uclamp.min in child cgroups as
implemented by cpu_util_update_eff() is still correct. The parent
protection sets an upper limit of what the child cgroups will
effectively get.

Fixes: 3eac870a32 (sched/uclamp: Use TG's clamps to restrict TASK's clamps)
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510145032.1934078-2-qais.yousef@arm.com
2021-05-19 10:53:02 +02:00
Yejune Deng
570a752b7a lib/smp_processor_id: Use is_percpu_thread() instead of nr_cpus_allowed
is_percpu_thread() more elegantly handles SMP vs UP, and further checks the
presence of PF_NO_SETAFFINITY. This lets us catch cases where
check_preemption_disabled() can race with a concurrent sched_setaffinity().

Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
[Amended changelog]
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210510151024.2448573-3-valentin.schneider@arm.com
2021-05-19 10:51:40 +02:00
Frederic Weisbecker
09fe880ed7 MAINTAINERS: Add myself as context tracking maintainer
I've been missing a lot of patches touching context tracking for which
I wasn't Cc'ed these last months. The code looks like a simple single
file but has a lot of subtle tentacles.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20210512232924.150322-11-frederic@kernel.org
2021-05-19 10:30:28 +02:00
Jani Nikula
eddd1b8f46 Merge tag 'gvt-fixes-2021-05-19' of https://github.com/intel/gvt-linux into drm-intel-fixes
gvt-fixes-2021-05-19

- Fix workaround in -rc1 for GVT config (Zhenyu)

Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519074912.GG4589@zhen-hp.sh.intel.com
2021-05-19 11:22:24 +03:00
Mauro Carvalho Chehab
85368a213e media: venus: venc: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:43 +02:00
Mauro Carvalho Chehab
1938ab0d27 media: venus: vdec: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

As a bonus, there's no need to check if ret == 1, as
pm_runtime_resume_and_get() always return 0 on success.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:43 +02:00
Mauro Carvalho Chehab
f6bf35ee3e media: venus: core: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:42 +02:00
Mauro Carvalho Chehab
09dfb36ce2 media: camss: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:42 +02:00
Mauro Carvalho Chehab
97df01fae8 media: mtk-jpeg: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:42 +02:00
Mauro Carvalho Chehab
7295e537bb media: coda: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

While here, as noted by Phillip, the labels at the coda_open()
function are currently named after what operation failed,
instead of what they do in response. So, change the name of
the error label that it is called when clk_enable fails,
in order to be consistent.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:42 +02:00
Mauro Carvalho Chehab
0ccb25b827 media: ipu3: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

Use the new API, in order to cleanup the error check logic.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:42 +02:00
Mauro Carvalho Chehab
bc700a13cd media: sti/hva: use pm_runtime_resume_and_get()
Commit dd8088d5a8 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.

While the hva driver does it right, there are lots of errors
on other drivers due to its misusage. So, let's change
this driver to also use pm_runtime_resume_and_get(), as we're
doing similar changes all over the media subsystem.

Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-05-19 09:51:42 +02:00