There is no point in using copy_init_pkru_to_fpregs() which in turn calls
write_pkru(). write_pkru() tries to fiddle with the task's xstate buffer
for nothing because the XRSTOR[S](init_fpstate) just cleared the xfeature
flag in the xstate header which makes get_xsave_addr() fail.
It's a useless exercise anyway because the reinitialization activates the
FPU so before the task's xstate buffer can be used again a XRSTOR[S] must
happen which in turn dumps the PKRU value.
Get rid of the now unused copy_init_pkru_to_fpregs().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.732508792@linutronix.de
In preparation of making the PKRU management more independent from XSTATES,
write the default PKRU value into the hardware right after enabling PKRU in
CR4. This ensures that switch_to() and copy_thread() have the correct
setting for init task and the per CPU idle threads right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.622983906@linutronix.de
Provide a simple and trivial helper which just writes the PKRU default
value without trying to fiddle with the task's xsave buffer.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.513729794@linutronix.de
When CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is disabled then the following
code fails to compile:
if (cpu_feature_enabled(X86_FEATURE_OSPKE)) {
u32 pkru = READ_ONCE(init_pkru_value);
..
}
because init_pkru_value is defined as '0' which makes READ_ONCE() upset.
Provide an accessor macro to avoid #ifdeffery all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.404880646@linutronix.de
X86_FEATURE_OSPKE is enabled first on the boot CPU and the feature flag is
set. Secondary CPUs have to enable CR4.PKE as well and set their per CPU
feature flag. That's ineffective because all call sites have checks for
boot_cpu_data.
Make it smarter and force the feature flag when PKU is enabled on the boot
cpu which allows then to use cpu_feature_enabled(X86_FEATURE_OSPKE) all
over the place. That either compiles the code out when PKEY support is
disabled in Kconfig or uses a static_cpu_has() for the feature check which
makes a significant difference in hotpaths, e.g. context switch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.305113644@linutronix.de
Both function names are a misnomer.
fpu__save() is actually about synchronizing the hardware register state
into the task's memory state so that either coredump or a math exception
handler can inspect the state at the time where the problem happens.
The function guarantees to preserve the register state, while "save" is a
common terminology for saving the current state so it can be modified and
restored later. This is clearly not the case here.
Rename it to fpu_sync_fpstate().
fpu__copy() is used to clone the current task's FPU state when duplicating
task_struct. While the register state is a copy the rest of the FPU state
is not.
Name it accordingly and remove the really pointless @src argument along
with the warning which comes along with it.
Nothing can ever copy the FPU state of a non-current task. It's clearly
just a consequence of arch_dup_task_struct(), but it makes no sense to
proliferate that further.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.196727450@linutronix.de
write_pkru() was originally used just to write to the PKRU register. It
was mercifully short and sweet and was not out of place in pgtable.h with
some other pkey-related code.
But, later work included a requirement to also modify the task XSAVE
buffer when updating the register. This really is more related to the
XSAVE architecture than to paging.
Move the read/write_pkru() to asm/pkru.h. pgtable.h won't miss them.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121455.102647114@linutronix.de
The copy functions for the independent features are horribly named and the
supervisor and independent part is just overengineered.
The point is that the supplied mask has either to be a subset of the
independent features or a subset of the task->fpu.xstate managed features.
Rewrite it so it checks for invalid overlaps of these areas in the caller
supplied feature mask. Rename it so it follows the new naming convention
for these operations. Mop up the function documentation.
This allows to use that function for other purposes as well.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/20210623121455.004880675@linutronix.de
The salient feature of "dynamic" XSTATEs is that they are not part of the
main task XSTATE buffer. The fact that they are dynamically allocated is
irrelevant and will become quite confusing when user math XSTATEs start
being dynamically allocated. Rename them to "independent" because they
are independent of the main XSTATE code.
This is just a search-and-replace with some whitespace updates to keep
things aligned.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/1eecb0e4f3e07828ebe5d737ec77dc3b708fad2d.1623388344.git.luto@kernel.org
Link: https://lkml.kernel.org/r/20210623121454.911450390@linutronix.de
Revert a recent PCI power management commit that causes
initialization issues to appear on some systems.
-----BEGIN PGP SIGNATURE-----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=x9q+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Revert a recent PCI power management commit that causes initialization
issues to appear on some systems"
* tag 'pm-5.13-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "PCI: PM: Do not read power state in pci_enable_device_flags()"
This is not a copy functionality. It restores the register state from the
supplied kernel buffer.
No functional changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.716058365@linutronix.de
On HETEROGENEOUS hardware (ARM big.Little, Intel Alderlake etc.) each
CPU might have a different hardware PMU. Since each such PMU is
represented by a different struct pmu, but we only have a single HW
task context.
That means that the task context needs to switch PMU type when it
switches CPUs.
Not doing this means that ctx->pmu calls (pmu_{dis,en}able(),
{start,commit,cancel}_txn() etc.) are called against the wrong PMU and
things will go wobbly.
Fixes: f83d2f91d2 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kan Liang <kan.liang@linux.intel.com>
Link: https://lkml.kernel.org/r/YMsy7BuGT8nBTspT@hirez.programming.kicks-ass.net
Perf errors out when sampling instructions:ppp.
$ perf record -e instructions:ppp -- true
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (instructions:ppp).
The instruction PDIR is only available on the fixed counter 0. The event
constraint has been updated to fixed0_constraint in
icl_get_event_constraints(). The Sapphire Rapids codes unconditionally
error out for the event which is not available on the GP counter 0.
Make the instructions:ppp an exception.
Fixes: 61b985e3e7 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Reported-by: Yasin, Ahmad <ahmad.yasin@intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1624029174-122219-4-git-send-email-kan.liang@linux.intel.com
On Sapphire Rapids, there are two more events 0x40ad and 0x04c2 which
rely on the FRONTEND MSR. If the FRONTEND MSR is not set correctly, the
count value is not correct.
Update intel_spr_extra_regs[] to support them.
Fixes: 61b985e3e7 ("perf/x86/intel: Add perf core PMU support for Sapphire Rapids")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1624029174-122219-3-git-send-email-kan.liang@linux.intel.com
For some Alder Lake machine, the below fixed counter check warning may be
triggered.
[ 2.010766] hw perf events fixed 5 > max(4), clipping!
Current perf unconditionally increases the number of the GP counters and
the fixed counters for a big core PMU on an Alder Lake system, because
the number enumerated in the CPUID only reflects the common counters.
The big core may has more counters. However, Alder Lake may have an
alternative configuration. With that configuration,
the X86_FEATURE_HYBRID_CPU is not set. The number of the GP counters and
fixed counters enumerated in the CPUID is accurate. Perf mistakenly
increases the number of counters. The warning is triggered.
Directly use the enumerated value on the system with the alternative
configuration.
Fixes: f83d2f91d2 ("perf/x86/intel: Add Alder Lake Hybrid support")
Reported-by: Jin Yao <yao.jin@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1624029174-122219-2-git-send-email-kan.liang@linux.intel.com
If we use the "PEBS-via-PT" feature on a platform that supports
extended PBES, like this:
perf record -c 10000 \
-e '{intel_pt/branch=0/,branch-instructions/aux-output/p}' uname
we will encounter the following call trace:
[ 250.906542] unchecked MSR access error: WRMSR to 0x14e1 (tried to write
0x0000000000000000) at rIP: 0xffffffff88073624 (native_write_msr+0x4/0x20)
[ 250.920779] Call Trace:
[ 250.923508] intel_pmu_pebs_enable+0x12c/0x190
[ 250.928359] intel_pmu_enable_event+0x346/0x390
[ 250.933300] x86_pmu_start+0x64/0x80
[ 250.937231] x86_pmu_enable+0x16a/0x2f0
[ 250.941434] perf_event_exec+0x144/0x4c0
[ 250.945731] begin_new_exec+0x650/0xbf0
[ 250.949933] load_elf_binary+0x13e/0x1700
[ 250.954321] ? lock_acquire+0xc2/0x390
[ 250.958430] ? bprm_execve+0x34f/0x8a0
[ 250.962544] ? lock_is_held_type+0xa7/0x120
[ 250.967118] ? find_held_lock+0x32/0x90
[ 250.971321] ? sched_clock_cpu+0xc/0xb0
[ 250.975527] bprm_execve+0x33d/0x8a0
[ 250.979452] do_execveat_common.isra.0+0x161/0x1d0
[ 250.984673] __x64_sys_execve+0x33/0x40
[ 250.988877] do_syscall_64+0x3d/0x80
[ 250.992806] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 250.998302] RIP: 0033:0x7fbc971d82fb
[ 251.002235] Code: Unable to access opcode bytes at RIP 0x7fbc971d82d1.
[ 251.009303] RSP: 002b:00007fffb8aed808 EFLAGS: 00000202 ORIG_RAX: 000000000000003b
[ 251.017478] RAX: ffffffffffffffda RBX: 00007fffb8af2f00 RCX: 00007fbc971d82fb
[ 251.025187] RDX: 00005574792aac50 RSI: 00007fffb8af2f00 RDI: 00007fffb8aed810
[ 251.032901] RBP: 00007fffb8aed970 R08: 0000000000000020 R09: 00007fbc9725c8b0
[ 251.040613] R10: 6d6c61632f6d6f63 R11: 0000000000000202 R12: 00005574792aac50
[ 251.048327] R13: 00007fffb8af35f0 R14: 00005574792aafdf R15: 00005574792aafe7
This is because the target reload msr address is calculated
based on the wrong base msr and the target reload msr value
is accessed from ds->pebs_event_reset[] with the wrong offset.
According to Intel SDM Table 2-14, for extended PBES feature,
the reload msr for MSR_IA32_FIXED_CTRx should be based on
MSR_RELOAD_FIXED_CTRx.
For fixed counters, let's fix it by overriding the reload msr
address and its value, thus avoiding out-of-bounds access.
Fixes: 42880f726c66("perf/x86/intel: Support PEBS output to PT")
Signed-off-by: Like Xu <likexu@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210621034710.31107-1-likexu@tencent.com
The FNSAVE support requires conditionals in quite some call paths because
FNSAVE reinitializes the FPU hardware. If the save has to preserve the FPU
register state then the caller has to conditionally restore it from memory
when FNSAVE is in use.
This also requires a conditional in context switch because the restore
avoidance optimization cannot work with FNSAVE. As this only affects 20+
years old CPUs there is really no reason to keep this optimization
effective for FNSAVE. It's about time to not optimize for antiques anymore.
Just unconditionally FRSTOR the save content to the registers and clean up
the conditionals all over the place.
Suggested-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.617369268@linutronix.de
A copy is guaranteed to leave the source intact, which is not the case when
FNSAVE is used as that reinitilizes the registers.
Save does not make such guarantees and it matches what this is about,
i.e. to save the state for a later restore.
Rename it to save_fpregs_to_fpstate().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.508853062@linutronix.de
copy_uabi_from_user_to_xstate() and copy_uabi_from_kernel_to_xstate() are
almost identical except for the copy function.
Unify them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20210623121454.414215896@linutronix.de
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Rename them to reflect that these functions deal with user space format
XSAVE buffers.
copy_kernel_to_xstate() -> copy_uabi_from_kernel_to_xstate()
copy_user_to_xstate() -> copy_sigframe_from_user_to_xstate()
Again a clear statement that these functions deal with user space ABI.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.318485015@linutronix.de
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
The function names for fnsave/fnrstor operations are horribly named and
a permanent source of confusion.
Rename:
copy_kernel_to_fregs() to frstor()
copy_fregs_to_user() to fnsave_to_user_sigframe()
copy_user_to_fregs() to frstor_from_user_sigframe()
so it's clear what these are doing. All these functions are really low
level wrappers around the equally named instructions, so mapping to the
documentation is just natural.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.223594101@linutronix.de
On Xilinx zynq SOC if the delay between address register write and
control register write in cdns_mrecv function is more, the xfer size
register rolls over and controller is stuck. This is an IP bug and
is resolved in later versions of IP.
To avoid this scenario, disable the interrupts on the current processor
core between the two register writes and enable them later. This can
help achieve the timing constraint.
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
This is in the way of renaming the low level hardware accessors to match
the instruction name. Prepend it with FPU_ which is consistent vs. the
rest of the emulation code.
No functional change.
[ bp: Correct the Reported-by: ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.111665161@linutronix.de
The function names for fxsave/fxrstor operations are horribly named and
a permanent source of confusion.
Rename:
copy_fxregs_to_kernel() to fxsave()
copy_kernel_to_fxregs() to fxrstor()
copy_fxregs_to_user() to fxsave_to_user_sigframe()
copy_user_to_fxregs() to fxrstor_from_user_sigframe()
so it's clear what these are doing. All these functions are really low
level wrappers around the equally named instructions, so mapping to the
documentation is just natural.
While at it, replace the static_cpu_has(X86_FEATURE_FXSR) with
use_fxsr() to be consistent with the rest of the code.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121454.017863494@linutronix.de
This switches the airtime scheduler in mac80211 to use a virtual
time-based scheduler instead of the round-robin scheduler used before.
This has a couple of advantages:
- No need to sync up the round-robin scheduler in firmware/hardware with
the round-robin airtime scheduler.
- If several stations are eligible for transmission we can schedule both
of them; no need to hard-block the scheduling rotation until the head
of the queue has used up its quantum.
- The check of whether a station is eligible for transmission becomes
simpler (in ieee80211_txq_may_transmit()).
The drawback is that scheduling becomes slightly more expensive, as we
need to maintain an rbtree of TXQs sorted by virtual time. This means
that ieee80211_register_airtime() becomes O(logN) in the number of
currently scheduled TXQs because it can change the order of the
scheduled stations. We mitigate this overhead by only resorting when a
station changes position in the tree, and hopefully N rarely grows too
big (it's only TXQs currently backlogged, not all associated stations),
so it shouldn't be too big of an issue.
To prevent divisions in the fast path, we maintain both station sums and
pre-computed reciprocals of the sums. This turns the fast-path operation
into a multiplication, with divisions only happening as the number of
active stations change (to re-compute the current sum of all active
station weights). To prevent this re-computation of the reciprocal from
happening too frequently, we use a time-based notion of station
activity, instead of updating the weight every time a station gets
scheduled or de-scheduled. As queues can oscillate between empty and
occupied quite frequently, this can significantly cut down on the number
of re-computations. It also has the added benefit of making the station
airtime calculation independent on whether the queue happened to have
drained at the time an airtime value was accounted.
Co-developed-by: Yibo Zhao <yiboz@codeaurora.org>
Signed-off-by: Yibo Zhao <yiboz@codeaurora.org>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/r/20210623134755.235545-1-toke@redhat.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This reverts commit f39b07fdfb ("mac80211: HE STA disassoc
due to QOS NULL not sent")
Since iwlwifi specific workaround, which blocks to send NDP,
is removed, we can revert this commit.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210623134826.10318-2-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Remove the remaining workaround that is not removed by the
commit e41eb3e408 ("mac80211: remove iwlwifi specific workaround
that broke sta NDP tx")
Fixes: 41cbb0f5a2 ("mac80211: add support for HE")
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20210623134826.10318-1-pkshih@realtek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
"sband->iftype_data" is not assigned with any value for non HE supported
devices, which causes NULL pointer access during mesh peer connection
in those devices. Fix this by accessing the pointer after HE
capabilities condition check.
Cc: stable@vger.kernel.org
Fixes: 7f7aa94bca (mac80211: reduce peer HE MCS/NSS to own capabilities)
Signed-off-by: Abinaya Kalaiselvan <akalaise@codeaurora.org>
Link: https://lore.kernel.org/r/1624459244-4497-1-git-send-email-akalaise@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull swiotlb fix from Konrad Rzeszutek Wilk:
"A fix for the regression for the DMA operations where the offset was
ignored and corruptions would appear.
Going forward there will be a cleanups to make the offset and
alignment logic more clearer and better test-cases to help with this"
* 'stable/for-linus-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: manipulate orig_addr when tlb_addr has offset
The function names for xsave[s]/xrstor[s] operations are horribly named and
a permanent source of confusion.
Rename:
copy_xregs_to_user() to xsave_to_user_sigframe()
copy_user_to_xregs() to xrstor_from_user_sigframe()
so it's entirely clear what this is about. This is also a clear indicator
of the potentially different storage format because this is user ABI and
cannot use compacted format.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.924266705@linutronix.de
The function names for xsave[s]/xrstor[s] operations are horribly named and
a permanent source of confusion.
Rename:
copy_xregs_to_kernel() to os_xsave()
copy_kernel_to_xregs() to os_xrstor()
These are truly low level wrappers around the actual instructions
XSAVE[OPT]/XRSTOR and XSAVES/XRSTORS with the twist that the selection
based on the available CPU features happens with an alternative to avoid
conditionals all over the place and to provide the best performance for hot
paths.
The os_ prefix tells that this is the OS selected mechanism.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.830239347@linutronix.de
Changes in v10:
- The internal CS inactive function is only supported after VER 0x00110002
Changes in v9:
- Conver to use CS GPIO description
Changes in v8:
- There is a problem with the version 7 mail format. resend it
Changes in v7:
- Fall back "rockchip,rv1126-spi" to "rockchip,rk3066-spi"
Changes in v6:
- Consider to compatibility, the "rockchip,rk3568-spi" is removed in
Series-changes v5, so the commit massage should also remove the
corresponding information
Changes in v5:
- Change to leave one compatible id rv1126, and rk3568 is compatible
with rv1126
Changes in v4:
- Adjust the order patches
- Simply commit massage like redundancy "application" content
Changes in v3:
- Fix compile error which is find by Sascha in [v2,2/8]
Jon Lin (6):
dt-bindings: spi: spi-rockchip: add description for rv1126
spi: rockchip: add compatible string for rv1126
spi: rockchip: Set rx_fifo interrupt waterline base on transfer item
spi: rockchip: Wait for STB status in slave mode tx_xfer
spi: rockchip: Support cs-gpio
spi: rockchip: Support SPI_CS_HIGH
.../devicetree/bindings/spi/spi-rockchip.yaml | 1 +
drivers/spi/spi-rockchip.c | 55 ++++++++++++++-----
2 files changed, 41 insertions(+), 15 deletions(-)
--
2.17.1
If the fast path of restoring the FPU state on sigreturn fails or is not
taken and the current task's FPU is active then the FPU has to be
deactivated for the slow path to allow a safe update of the tasks FPU
memory state.
With supervisor states enabled, this requires to save the supervisor state
in the memory state first. Supervisor states require XSAVES so saving only
the supervisor state requires to reshuffle the memory buffer because XSAVES
uses the compacted format and therefore stores the supervisor states at the
beginning of the memory state. That's just an overengineered optimization.
Get rid of it and save the full state for this case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.734561971@linutronix.de
The function does a sanity check with a WARN_ON_ONCE() but happily proceeds
when the pkey argument is out of range.
Clean it up.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.635764326@linutronix.de
PKRU is being removed from the kernel XSAVE/FPU buffers. This removal
will probably include warnings for code that look up PKRU in those
buffers.
KVM currently looks up the location of PKRU but doesn't even use the
pointer that it gets back. Rework the code to avoid calling
get_xsave_addr() except in cases where its result is actually used.
This makes the code more clear and also avoids the inevitable PKRU
warnings.
This is probably a good cleanup and could go upstream idependently
of any PKRU rework.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.541037562@linutronix.de
This function is pointlessly global and a complete misnomer because it's
usage is related to both supervisor state checks and compacted format
checks. Remove it and just make the conditions check the XSAVES feature.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.425493349@linutronix.de
The only usecase for fpu__write_begin is the set() callback of regset, so
the function is pointlessly global.
Move it to the regset code and rename it to fpu_force_restore() which is
exactly decribing what the function does.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.328652975@linutronix.de
The function can only be used from the regset get() callbacks safely. So
there is no reason to have it globally exposed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.234942936@linutronix.de
Use the new functionality of copy_xstate_to_uabi_buf() to retrieve the
FX state when XSAVE* is in use. This avoids to overwrite the FPU state
buffer with fpstate_sanitize_xstate() which is error prone and duplicated
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121453.014441775@linutronix.de
Use the new functionality of copy_xstate_to_uabi_buf() to retrieve the
FX state when XSAVE* is in use. This avoids overwriting the FPU state
buffer with fpstate_sanitize_xstate() which is error prone and duplicated
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.901736860@linutronix.de
When xsave with init state optimization is used then a component's state
in the task's xsave buffer can be stale when the corresponding feature bit
is not set.
fpregs_get() and xfpregs_get() invoke fpstate_sanitize_xstate() to update
the task's xsave buffer before retrieving the FX or FP state. That's just
duplicated code as copy_xstate_to_kernel() already handles this correctly.
Add a copy mode argument to the function which allows to restrict the state
copy to the FP and SSE features.
Also rename the function to copy_xstate_to_uabi_buf() so the name reflects
what it is doing.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.805327286@linutronix.de
fpregs_set() has unnecessary complexity to support short or nonzero-offset
writes and to handle the case in which a copy from userspace overwrites
some of the target buffer and then fails. Support for partial writes is
useless -- just require that the write has offset 0 and the correct size,
and copy into a temporary kernel buffer to avoid clobbering the state if
the user access fails.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.710467587@linutronix.de
