There is no benefit from accepting and silently changing an invalid MXCSR
value supplied via ptrace(). Instead, return -EINVAL on invalid input.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.613614842@linutronix.de
xfpregs_set() was incomprehensible. Almost all of the complexity was due
to trying to support nonsensically sized writes or -EFAULT errors that
would have partially or completely overwritten the destination before
failing. Nonsensically sized input would only have been possible using
PTRACE_SETREGSET on REGSET_XFP. Fortunately, it appears (based on Debian
code search results) that no one uses that API at all, let alone with the
wrong sized buffer. Failed user access can be handled more cleanly by
first copying to kernel memory.
Just rewrite it to require sensible input.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.504234607@linutronix.de
ptrace() has interfaces that let a ptracer inspect a ptracee's register state.
This includes XSAVE state. The ptrace() ABI includes a hardware-format XSAVE
buffer for both the SETREGS and GETREGS interfaces.
In the old days, the kernel buffer and the ptrace() ABI buffer were the
same boring non-compacted format. But, since the advent of supervisor
states and the compacted format, the kernel buffer has diverged from the
format presented in the ABI.
This leads to two paths in the kernel:
1. Effectively a verbatim copy_to_user() which just copies the kernel buffer
out to userspace. This is used when the kernel buffer is kept in the
non-compacted form which means that it shares a format with the ptrace
ABI.
2. A one-state-at-a-time path: copy_xstate_to_kernel(). This is theoretically
slower since it does a bunch of piecemeal copies.
Remove the verbatim copy case. Speed probably does not matter in this path,
and the vast majority of new hardware will use the one-state-at-a-time path
anyway. This ensures greater testing for the "slow" path.
This also makes enabling PKRU in this interface easier since a single path
can be patched instead of two.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.408457100@linutronix.de
Instead of masking out reserved bits, check them and reject the provided
state as invalid if not zero.
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.308388343@linutronix.de
xstateregs_set() operates on a stopped task and tries to copy the provided
buffer into the task's fpu.state.xsave buffer.
Any error while copying or invalid state detected after copying results in
wiping the target task's FPU state completely including supervisor states.
That's just wrong. The caller supplied invalid data or has a problem with
unmapped memory, so there is absolutely no justification to corrupt the
target state.
Fix this with the following modifications:
1) If data has to be copied from userspace, allocate a buffer and copy from
user first.
2) Use copy_kernel_to_xstate() unconditionally so that header checking
works correctly.
3) Return on error without corrupting the target state.
This prevents corrupting states and lets the caller deal with the problem
it caused in the first place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.214903673@linutronix.de
If the count argument is larger than the xstate size, this will happily
copy beyond the end of xstate.
Fixes: 91c3dba7db ("x86/fpu/xstate: Fix PTRACE frames for XSAVES")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.120741557@linutronix.de
They are only used in fpstate_init() and there is no point to have them in
a header just to make reading the code harder.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121452.023118522@linutronix.de
This function is really not doing what the comment advertises:
"Find supported xfeatures based on cpu features and command-line input.
This must be called after fpu__init_parse_early_param() is called and
xfeatures_mask is enumerated."
fpu__init_parse_early_param() does not exist anymore and the function just
returns a constant.
Remove it and fix the caller and get rid of further references to
fpu__init_parse_early_param().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121451.816404717@linutronix.de
Nothing has to modify this after init.
But of course there is code which unconditionally masks
xfeatures_mask_all on CPU hotplug. This goes unnoticed during boot
hotplug because at that point the variable is still RW mapped.
This is broken in several ways:
1) Masking this in post init CPU hotplug means that any
modification of this state goes unnoticed until actual hotplug
happens.
2) If that ever happens then these bogus feature bits are already
populated all over the place and the system is in inconsistent state
vs. the compacted XSTATE offsets. If at all then this has to panic the
machine because the inconsistency cannot be undone anymore.
Make this a one-time paranoia check in xstate init code and disable
xsave when this happens.
Reported-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121451.712803952@linutronix.de
This cannot work and it's unclear how that ever made a difference.
init_fpstate.xsave.header.xfeatures is always 0 so get_xsave_addr() will
always return a NULL pointer, which will prevent storing the default PKRU
value in init_fpstate.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121451.451391598@linutronix.de
The gap handling in copy_xstate_to_kernel() is wrong when XSAVES is in
use.
Using init_fpstate for copying the init state of features which are
not set in the xstate header is only correct for the legacy area, but
not for the extended features area because when XSAVES is in use then
init_fpstate is in compacted form which means the xstate offsets which
are used to copy from init_fpstate are not valid.
Fortunately, this is not a real problem today because all extended
features in use have an all-zeros init state, but it is wrong
nevertheless and with a potentially dynamically sized init_fpstate this
would result in an access outside of the init_fpstate.
Fix this by keeping track of the last copied state in the target buffer and
explicitly zero it when there is a feature or alignment gap.
Use the compacted offset when accessing the extended feature space in
init_fpstate.
As this is not a functional issue on older kernels this is intentionally
not tagged for stable.
Fixes: b8be15d588 ("x86/fpu/xstate: Re-enable XSAVES")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210623121451.294282032@linutronix.de
Pick up dependent changes which either went mainline (x86/urgent is
based on -rc7 and that contains them) as urgent fixes and the current
x86/urgent branch which contains two more urgent fixes, so that the
bigger FPU rework can base off ontop.
Signed-off-by: Borislav Petkov <bp@suse.de>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210623095843.3228-3-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dmaengine_terminate_all() is deprecated in favor of explicitly saying if
it should be sync or async. Here, we want dmaengine_terminate_sync()
because there is no other synchronization code in the driver to handle
an async case.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210623095843.3228-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Hi,
this is v2 from my patchset that add support for the TAS2505 to the tlv320aic32x4 driver.
kind regards,
Claudius
Changes from v1:
- clarified commit message of first patch, which add the type value to the struct
- removed unnecessary code to put and get speaker volume
- removed 'Gain' from 'HP Driver Playback Volume' control
- fixed rebase issues
Claudius Heine (3):
ASoC: tlv320aic32x4: add type to device private data struct
ASoC: tlv320aic32x4: add support for TAS2505
ASoC: tlv320aic32x4: dt-bindings: add TAS2505 to compatible
.../bindings/sound/tlv320aic32x4.txt | 1 +
sound/soc/codecs/tlv320aic32x4-i2c.c | 22 ++-
sound/soc/codecs/tlv320aic32x4-spi.c | 23 ++-
sound/soc/codecs/tlv320aic32x4.c | 139 +++++++++++++++++-
sound/soc/codecs/tlv320aic32x4.h | 10 ++
5 files changed, 186 insertions(+), 9 deletions(-)
base-commit: 70585216fe
--
2.32.0
Instead of using static bandwidth setup, manage bandwidth dynamically,
depending on the amount of allocated planes, their format and
resolution.
Co-developed-with: James Willcox <jwillcox@squareup.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210525131316.3117809-8-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Prior downstream kernels had "fudge factors" in devicetree which would
be applied to things like interconnect bandwidth calculations. Bring
some of those values back here.
Signed-off-by: James Willcox <jwillcox@squareup.com>
[DB: changed _ff to _inefficiency, fixed patch description]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-7-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Hook alpha and pixel blend mode support to be exported as proper DRM
plane properties. This allows using this functionality from the
userspace.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-5-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use generic helpers code to manage drm_plane_state part of mdp5_plane
state instead of manually coding all the details.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210525131316.3117809-2-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Move the call to dsi_mgr_phy_enable after checking whether the DSI
interface is slave, so that PHY enablement happens together with the
host enablement.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210609211211.2561090-1-dmitry.baryshkov@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Handling of the interrupt callback lists is done in dpu_core_irq.c,
under the "cb_lock" spinlock. When these operations results in the need
for enableing or disabling the IRQ in the hardware the code jumps to
dpu_hw_interrupts.c, which protects its operations with "irq_lock"
spinlock.
When an interrupt fires, dpu_hw_intr_dispatch_irq() inspects the
hardware state while holding the "irq_lock" spinlock and jumps to
dpu_core_irq_callback_handler() to invoke the registered handlers, which
traverses the callback list under the "cb_lock" spinlock.
As such, in the event that these happens concurrently we'll end up with
a deadlock.
Prior to '1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")'
the enable/disable of the hardware interrupt was done outside the
"cb_lock" region, optimitically by using an atomic enable-counter for
each interrupt and an warning print if someone changed the list between
the atomic_read and the time the operation concluded.
Rather than re-introducing the large array of atomics, this change
embraces the fact that dpu_core_irq and dpu_hw_interrupts are deeply
entangled and make them share the single "irq_lock".
Following this step it's suggested that we squash the two parts into a
single irq handling thing.
Fixes: 1c1e7763a6d4 ("drm/msm/dpu: simplify IRQ enabling/disabling")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210611170003.3539059-1-bjorn.andersson@linaro.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Wire up support to stall the SMMU on iova fault, and collect a devcore-
dump snapshot for easier debugging of faults.
Currently this is a6xx-only, but mostly only because so far it is the
only one using adreno-smmu-priv.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Link: https://lore.kernel.org/r/20210610214431.539029-6-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add, via the adreno-smmu-priv interface, a way for the GPU to request
the SMMU to stall translation on faults, and then later resume the
translation, either retrying or terminating the current translation.
This will be used on the GPU side to "freeze" the GPU while we snapshot
useful state for devcoredump.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Jordan Crouse <jordan@cosmicpenguin.net>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-5-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use the new adreno-smmu-priv fault info function to get more SMMU
debug registers and print the current TTBR0 to debug per-instance
pagetables and figure out which GPU block generated the request.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-4-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add a callback in adreno-smmu-priv to read interesting SMMU
registers to provide an opportunity for a richer debug experience
in the GPU driver.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-3-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Call report_iommu_fault() to allow upper-level drivers to register their
own fault handlers.
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210610214431.539029-2-robdclark@gmail.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
While keeping the previous default value for hangcheck period,
we allow now the possibility of configuring its value via
debugfs.
Signed-off-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Link: https://lore.kernel.org/r/20210607104441.184700-1-siglesias@igalia.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Add adreno_is_{a660,a650_family} helpers and convert update existing
adreno_is_a650 usage based on downstream driver's logic (changing into
adreno_is_a650_family or adding adreno_is_a660).
And add the remaining changes required for A660, again based on
the downstream driver: missing GMU allocations, additional register init,
dummy hfi BW table, cp protect list, entry in gpulist table, hwcg table,
updated a6xx_ucode_check_version check.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-6-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
SM8250 AOP firmware already sets up PDC registers for us, and it only needs
to be enabled. This path will be used for other newer GPUs.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Link: https://lore.kernel.org/r/20210608172808.11803-3-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
These aren't used by anything anymore.
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Akhil P Oommen <akhilpo@codeaurora.org>
Link: https://lore.kernel.org/r/20210608172808.11803-2-jonathan@marek.ca
Signed-off-by: Rob Clark <robdclark@chromium.org>
Based on mesa commit daa2ccff7a0201941db3901780d179e2634057d5
Small bit of .c churn in the phy code to adapt to split up of phy
related registers.
Signed-off-by: Rob Clark <robdclark@chromium.org>
The code does not really use dpu_hw_blk fields, so drop them, making
dpu_hw_blk empty structure.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-5-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Use struct dpu_hw_merge_3d pointer in struct dpu_hw_pingpong rather
than using struct dpu_hw_blk. This is the only user of dpu_hw_blk.id,
which will be cleaned in the next patch.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-4-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
The dpu_hw_blk_destroy() function is empty, so we can drop it now.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-3-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Remove all unused dpu_hw_blk features and functions:
- dpu_hw_blk_get()/_put() and respective refcounting,
- global list of all dpu_hw_blk instances,
- dpu_hw_blk_ops and empty implementation inside each hw_blk subdriver.
This leaves dpu_hw_blk as a placeholder with just type and index.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210515190909.1809050-2-dmitry.baryshkov@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
In order to ease debugging of DSI host registration issues, print return
code of dsi_mgr_setup_components().
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_link.c:374: warning: expecting prototype for dp_parse_video_pattern_params(). Prototype was for dp_link_parse_video_pattern_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:573: warning: expecting prototype for dp_parse_phy_test_params(). Prototype was for dp_link_parse_phy_test_params() instead
drivers/gpu/drm/msm/dp/dp_link.c:975: warning: expecting prototype for dp_link_process_downstream_port_status_change(). Prototype was for dp_link_process_ds_port_status_change() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-15-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Function parameter or member 'dp_catalog' not described in 'dp_catalog_aux_reset'
drivers/gpu/drm/msm/dp/dp_catalog.c:206: warning: Excess function parameter 'aux' description in 'dp_catalog_aux_reset'
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Chandan Uddaraju <chandanu@codeaurora.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-14-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/msm_gem.c:364: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
drivers/gpu/drm/msm/msm_gem.c:763: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-13-lee.jones@linaro.org
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:373: warning: expecting prototype for _dpu_plane_set_panic_lut(). Prototype was for _dpu_plane_set_danger_lut() instead
drivers/gpu/drm/msm/disp/dpu1/dpu_plane.c:498: warning: expecting prototype for _dpu_plane_set_vbif_qos(). Prototype was for _dpu_plane_set_qos_remap() instead
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: linux-arm-msm@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: freedreno@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20210602143300.2330146-12-lee.jones@linaro.org
Reviewed-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
These messages are useful for bringup/early development but in
production they don't provide much value. We know what sort of GPU we
have and interrupt information can be gathered other ways. This cuts
down on lines in the drm debug logs that happen too often, making the
debug logs practically useless.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Abhinav Kumar <abhinavk@codeaurora.org>
Cc: Kuogee Hsieh <khsieh@codeaurora.org>
Cc: aravindh@codeaurora.org
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20210430193104.1770538-3-swboyd@chromium.org
[resolve merge conflicts with dpu irq refactor]
Signed-off-by: Rob Clark <robdclark@chromium.org>
