Commit graph

131,169 commits

Author SHA1 Message Date
Vladimir Oltean
1dbb130281 net: dsa: remove the DSA specific notifiers
This effectively reverts commit 60724d4bae ("net: dsa: Add support for
DSA specific notifiers"). The reason is that since commit 2f1e8ea726
("net: dsa: link interfaces with the DSA master to get rid of lockdep
warnings"), it appears that there is a generic way to achieve the same
purpose. The only user thus far, the Broadcom SYSTEMPORT driver, was
converted to use the generic notifiers.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 15:42:07 -08:00
Vladimir Oltean
a5e3c9ba92 net: dsa: export dsa_slave_dev_check
Using the NETDEV_CHANGEUPPER notifications, drivers can be aware when
they are enslaved to e.g. a bridge by calling netif_is_bridge_master().

Export this helper from DSA to get the equivalent functionality of
determining whether the upper interface of a CHANGEUPPER notifier is a
DSA switch interface or not.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 15:42:07 -08:00
Vladimir Oltean
f46b9b8ee8 net: dsa: move the Broadcom tag information in a separate header file
It is a bit strange to see something as specific as Broadcom SYSTEMPORT
bits in the main DSA include file. Move these away into a separate
header, and have the tagger and the SYSTEMPORT driver include them.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 15:42:07 -08:00
Vladimir Oltean
d5f19486ce net: dsa: listen for SWITCHDEV_{FDB,DEL}_ADD_TO_DEVICE on foreign bridge neighbors
Some DSA switches (and not only) cannot learn source MAC addresses from
packets injected from the CPU. They only perform hardware address
learning from inbound traffic.

This can be problematic when we have a bridge spanning some DSA switch
ports and some non-DSA ports (which we'll call "foreign interfaces" from
DSA's perspective).

There are 2 classes of problems created by the lack of learning on
CPU-injected traffic:
- excessive flooding, due to the fact that DSA treats those addresses as
  unknown
- the risk of stale routes, which can lead to temporary packet loss

To illustrate the second class, consider the following situation, which
is common in production equipment (wireless access points, where there
is a WLAN interface and an Ethernet switch, and these form a single
bridging domain).

 AP 1:
 +------------------------------------------------------------------------+
 |                                          br0                           |
 +------------------------------------------------------------------------+
 +------------+ +------------+ +------------+ +------------+ +------------+
 |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
 +------------+ +------------+ +------------+ +------------+ +------------+
       |                                                       ^        ^
       |                                                       |        |
       |                                                       |        |
       |                                                    Client A  Client B
       |
       |
       |
 +------------+ +------------+ +------------+ +------------+ +------------+
 |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
 +------------+ +------------+ +------------+ +------------+ +------------+
 +------------------------------------------------------------------------+
 |                                          br0                           |
 +------------------------------------------------------------------------+
 AP 2

- br0 of AP 1 will know that Clients A and B are reachable via wlan0
- the hardware fdb of a DSA switch driver today is not kept in sync with
  the software entries on other bridge ports, so it will not know that
  clients A and B are reachable via the CPU port UNLESS the hardware
  switch itself performs SA learning from traffic injected from the CPU.
  Nonetheless, a substantial number of switches don't.
- the hardware fdb of the DSA switch on AP 2 may autonomously learn that
  Client A and B are reachable through swp0. Therefore, the software br0
  of AP 2 also may or may not learn this. In the example we're
  illustrating, some Ethernet traffic has been going on, and br0 from AP
  2 has indeed learnt that it can reach Client B through swp0.

One of the wireless clients, say Client B, disconnects from AP 1 and
roams to AP 2. The topology now looks like this:

 AP 1:
 +------------------------------------------------------------------------+
 |                                          br0                           |
 +------------------------------------------------------------------------+
 +------------+ +------------+ +------------+ +------------+ +------------+
 |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
 +------------+ +------------+ +------------+ +------------+ +------------+
       |                                                            ^
       |                                                            |
       |                                                         Client A
       |
       |
       |                                                         Client B
       |                                                            |
       |                                                            v
 +------------+ +------------+ +------------+ +------------+ +------------+
 |    swp0    | |    swp1    | |    swp2    | |    swp3    | |    wlan0   |
 +------------+ +------------+ +------------+ +------------+ +------------+
 +------------------------------------------------------------------------+
 |                                          br0                           |
 +------------------------------------------------------------------------+
 AP 2

- br0 of AP 1 still knows that Client A is reachable via wlan0 (no change)
- br0 of AP 1 will (possibly) know that Client B has left wlan0. There
  are cases where it might never find out though. Either way, DSA today
  does not process that notification in any way.
- the hardware FDB of the DSA switch on AP 1 may learn autonomously that
  Client B can be reached via swp0, if it receives any packet with
  Client 1's source MAC address over Ethernet.
- the hardware FDB of the DSA switch on AP 2 still thinks that Client B
  can be reached via swp0. It does not know that it has roamed to wlan0,
  because it doesn't perform SA learning from the CPU port.

Now Client A contacts Client B.
AP 1 routes the packet fine towards swp0 and delivers it on the Ethernet
segment.
AP 2 sees a frame on swp0 and its fdb says that the destination is swp0.
Hairpinning is disabled => drop.

This problem comes from the fact that these switches have a 'blind spot'
for addresses coming from software bridging. The generic solution is not
to assume that hardware learning can be enabled somehow, but to listen
to more bridge learning events. It turns out that the bridge driver does
learn in software from all inbound frames, in __br_handle_local_finish.
A proper SWITCHDEV_FDB_ADD_TO_DEVICE notification is emitted for the
addresses serviced by the bridge on 'foreign' interfaces. The software
bridge also does the right thing on migration, by notifying that the old
entry is deleted, so that does not need to be special-cased in DSA. When
it is deleted, we just need to delete our static FDB entry towards the
CPU too, and wait.

The problem is that DSA currently only cares about SWITCHDEV_FDB_ADD_TO_DEVICE
events received on its own interfaces, such as static FDB entries.

Luckily we can change that, and DSA can listen to all switchdev FDB
add/del events in the system and figure out if those events were emitted
by a bridge that spans at least one of DSA's own ports. In case that is
true, DSA will also offload that address towards its own CPU port, in
the eventuality that there might be bridge clients attached to the DSA
switch who want to talk to the station connected to the foreign
interface.

In terms of implementation, we need to keep the fdb_info->added_by_user
check for the case where the switchdev event was targeted directly at a
DSA switch port. But we don't need to look at that flag for snooped
events. So the check is currently too late, we need to move it earlier.
This also simplifies the code a bit, since we avoid uselessly allocating
and freeing switchdev_work.

We could probably do some improvements in the future. For example,
multi-bridge support is rudimentary at the moment. If there are two
bridges spanning a DSA switch's ports, and both of them need to service
the same MAC address, then what will happen is that the migration of one
of those stations will trigger the deletion of the FDB entry from the
CPU port while it is still used by other bridge. That could be improved
with reference counting but is left for another time.

This behavior needs to be enabled at driver level by setting
ds->assisted_learning_on_cpu_port = true. This is because we don't want
to inflict a potential performance penalty (accesses through
MDIO/I2C/SPI are expensive) to hardware that really doesn't need it
because address learning on the CPU port works there.

Reported-by: DENG Qingfang <dqfext@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 15:34:46 -08:00
Tom Lendacky
647daca25d KVM: SVM: Add support for booting APs in an SEV-ES guest
Typically under KVM, an AP is booted using the INIT-SIPI-SIPI sequence,
where the guest vCPU register state is updated and then the vCPU is VMRUN
to begin execution of the AP. For an SEV-ES guest, this won't work because
the guest register state is encrypted.

Following the GHCB specification, the hypervisor must not alter the guest
register state, so KVM must track an AP/vCPU boot. Should the guest want
to park the AP, it must use the AP Reset Hold exit event in place of, for
example, a HLT loop.

First AP boot (first INIT-SIPI-SIPI sequence):
  Execute the AP (vCPU) as it was initialized and measured by the SEV-ES
  support. It is up to the guest to transfer control of the AP to the
  proper location.

Subsequent AP boot:
  KVM will expect to receive an AP Reset Hold exit event indicating that
  the vCPU is being parked and will require an INIT-SIPI-SIPI sequence to
  awaken it. When the AP Reset Hold exit event is received, KVM will place
  the vCPU into a simulated HLT mode. Upon receiving the INIT-SIPI-SIPI
  sequence, KVM will make the vCPU runnable. It is again up to the guest
  to then transfer control of the AP to the proper location.

  To differentiate between an actual HLT and an AP Reset Hold, a new MP
  state is introduced, KVM_MP_STATE_AP_RESET_HOLD, which the vCPU is
  placed in upon receiving the AP Reset Hold exit event. Additionally, to
  communicate the AP Reset Hold exit event up to userspace (if needed), a
  new exit reason is introduced, KVM_EXIT_AP_RESET_HOLD.

A new x86 ops function is introduced, vcpu_deliver_sipi_vector, in order
to accomplish AP booting. For VMX, vcpu_deliver_sipi_vector is set to the
original SIPI delivery function, kvm_vcpu_deliver_sipi_vector(). SVM adds
a new function that, for non SEV-ES guests, invokes the original SIPI
delivery function, kvm_vcpu_deliver_sipi_vector(), but for SEV-ES guests,
implements the logic above.

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <e8fbebe8eb161ceaabdad7c01a5859a78b424d5e.1609791600.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-01-07 18:11:37 -05:00
Paolo Bonzini
bc351f0726 Merge branch 'kvm-master' into kvm-next
Fixes to get_mmio_spte, destined to 5.10 stable branch.
2021-01-07 18:06:52 -05:00
Florian Fainelli
8b86850bf9 net: phy: bcm7xxx: Add an entry for BCM72116
BCM72116 features a 28nm integrated EPHY, add an entry to match this PHY
OUI.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20210106170944.1253046-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 14:46:09 -08:00
Jakub Kicinski
b9ef3fecd1 udp_tunnel: reshuffle NETIF_F_RX_UDP_TUNNEL_PORT checks
Move the NETIF_F_RX_UDP_TUNNEL_PORT feature check into
udp_tunnel_nic_*_port() helpers, since they're always
done right before the call.

Add similar checks before calling the notifier.
udp_tunnel_nic invokes the notifier without checking
features which could result in some wasted cycles.

Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 12:53:29 -08:00
Jakub Kicinski
30bfce1094 net: remove ndo_udp_tunnel_* callbacks
All UDP tunnel port management is now routed via udp_tunnel_nic
infra directly. Remove the old callbacks.

Reviewed-by: Alexander Duyck <alexanderduyck@fb.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-07 12:53:29 -08:00
Aya Levin
9c9be85f6b net/mlx5e: Add missing capability check for uplink follow
Expose firmware indication that it supports setting eswitch uplink state
to follow (follow the physical link). Condition setting the eswitch
uplink admin-state with this capability bit. Older FW may not support
the uplink state setting.

Fixes: 7d0314b11c ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-01-07 12:22:48 -08:00
Saravana Kannan
4b9bbb29ba driver core: Add device link support for INFERRED flag
This flag can never be added to a device link that already exists and
doesn't have the flag set. It can only be added when a device link is
created for the first time or it can be maintained if the device link
already has the it set.

This flag will be used for marking device links created ONLY by
inferring dependencies from data and NOT from explicit action by device
drivers/frameworks.  This will be useful in the future when we need to
deal with cycles in dependencies inferred from firmware.

Signed-off-by: Saravana Kannan <saravanak@google.com>
Link: https://lore.kernel.org/r/20201218031703.3053753-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 20:55:00 +01:00
Lina Iyer
fef419c463 soc: qcom: rpmh: Remove serialization of TCS commands
Requests sent to RPMH can be sent as fire-n-forget or response required,
with the latter ensuring the command has been completed by the hardware
accelerator. Commands in a request with tcs_cmd::wait set, would ensure
that those select commands are sent as response required, even though
the actual TCS request may be fire-n-forget.

Also, commands with .wait flag were also guaranteed to be complete
before the following command in the TCS is sent. This means that the
next command of the same request blocked until the current request is
completed. This could mean waiting for a voltage to settle or series of
NOCs be configured before the next command is sent. But drivers using
this feature have never cared about the serialization aspect. By not
enforcing the serialization we can allow the hardware to run in parallel
improving the performance.

Let's clarify the usage of this member in the tcs_cmd structure to mean
only completion and not serialization. This should also improve the
performance of bus requests where changes could happen in parallel.
Also, CPU resume from deep idle may see benefits from certain wake
requests.

Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Lina Iyer <ilina@codeaurora.org>
Signed-off-by: Maulik Shah <mkshah@codeaurora.org>
Link: https://lore.kernel.org/r/1610008770-13891-1-git-send-email-mkshah@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-07 10:59:46 -06:00
Daniel Lezcano
04f111130e thermal/core: Remove notify ops
With the removal of the notifys user in a previous patches, the ops is no
longer needed, remove it.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20201210121514.25760-5-daniel.lezcano@linaro.org
2021-01-07 17:48:56 +01:00
Shawn Guo
ee61cfd955 ACPI: scan: add stub acpi_create_platform_device() for !CONFIG_ACPI
It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so
that caller doesn't have to deal with !CONFIG_ACPI build issue.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-01-07 17:44:00 +01:00
Corey Minyard
f446776ebf tty: Export redirect release
This will be required by the pty code when it removes tty_vhangup() on
master close.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Link: https://lore.kernel.org/r/20201124004902.1398477-2-minyard@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 16:30:55 +01:00
Jiri Slaby
c762a2b846 tty: drop termiox user definitions
As was concluded in a follow-up discussion of commit e0efb3168d (tty:
Remove dead termiox code) [1], termiox ioctls never worked, so there is
barely anyone using this interface. We can safely remove the user
definitions for this never adopted interface.

[1] https://lore.kernel.org/lkml/c1c9fc04-02eb-2260-195b-44c357f057c0@kernel.org/t/#u

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-12-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 16:17:32 +01:00
Jiri Slaby
0bc1bd092a tty_port: drop last traces of low_latency
The main purpose of tty_port::low_latency was removed in commit
a9c3f68f3c (tty: Fix low_latency BUG) back in 2014. It was left in
place for drivers as an optional tune knob. But only one driver has been
using it until the previous commit. So remove this misconcept
completely, given there are no users.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-11-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 16:17:32 +01:00
Jiri Slaby
cac8a63063 vgacon: drop BROKEN_GRAPHICS_PROGRAMS
BROKEN_GRAPHICS_PROGRAMS is defined when CONFIG_VGA_CONSOLE=y. And
vgacon.c is built exclusively in that case too. So the check for
BROKEN_GRAPHICS_PROGRAMS is pointless in vgacon.c as it is always true.
So remove the test and BROKEN_GRAPHICS_PROGRAMS completely.

This also eliminates the need for vga_font_is_default global as it is
only set and never read.

Cc: dri-devel@lists.freedesktop.org
Cc: linux-fbdev@vger.kernel.org
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-9-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 16:17:31 +01:00
Jiri Slaby
ff2047fb75 vt: drop old FONT ioctls
Drop support for these ioctls:
* PIO_FONT, PIO_FONTX
* GIO_FONT, GIO_FONTX
* PIO_FONTRESET

As was demonstrated by commit 90bfdeef83 (tty: make FONTX ioctl use
the tty pointer they were actually passed), these ioctls are not used
from userspace, as:
1) they used to be broken (set up font on current console, not the open
   one) and racy (before the commit above)
2) KDFONTOP ioctl is used for years instead

Note that PIO_FONTRESET is defunct on most systems as VGA_CONSOLE is set
on them for ages. That turns on BROKEN_GRAPHICS_PROGRAMS which makes
PIO_FONTRESET just return an error.

We are removing KD_FONT_FLAG_OLD here as it was used only by these
removed ioctls. kd.h header exists both in kernel and uapi headers, so
we can remove the kernel one completely. Everyone includeing kd.h will
now automatically get the uapi one.

There are now unused definitions of the ioctl numbers and "struct
consolefontdesc" in kd.h, but as it is a uapi header, I am not touching
these.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-8-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 16:17:31 +01:00
Jiri Slaby
a18a9da82c vt: keyboard, make keyboard_tasklet local
Now that the last extern user of the tasklet (set_leds) is in
keyboard.c, we can make keyboard_tasklet local to this unit too.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 16:17:31 +01:00
Jiri Slaby
63f24a7faf vt: move set_leds to keyboard.c
set_leds and compute_shiftstate are called from a single place in vt.c.
Let's combine these two into vt_set_leds_compute_shiftstate. This allows
for making keyboard_tasklet local in the next patch.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210105120239.28031-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 16:17:31 +01:00
Sakari Ailus
2984a99ff1 media: v4l: common: Fix naming of v4l2_get_link_rate
Rename v4l2_get_link_rate() as v4l2_get_link_freq(). What the function
returns is the frequency of the link; rename it to reflect the name of the
control where the information is obtained.

Fixes: 1b888b3ceb ("media: v4l: Add a helper for obtaining the link frequency")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-07 15:47:52 +01:00
Liu Yi L
18abda7a2d iommu/vt-d: Fix general protection fault in aux_detach_device()
The aux-domain attach/detach are not tracked, some data structures might
be used after free. This causes general protection faults when multiple
subdevices are created and assigned to a same guest machine:

  | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI
  | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0
  | [...]
  | Call Trace:
  |  iommu_aux_detach_device+0x24/0x70
  |  vfio_mdev_detach_domain+0x3b/0x60
  |  ? vfio_mdev_set_domain+0x50/0x50
  |  iommu_group_for_each_dev+0x4f/0x80
  |  vfio_iommu_detach_group.isra.0+0x22/0x30
  |  vfio_iommu_type1_detach_group.cold+0x71/0x211
  |  ? find_exported_symbol_in_section+0x4a/0xd0
  |  ? each_symbol_section+0x28/0x50
  |  __vfio_group_unset_container+0x4d/0x150
  |  vfio_group_try_dissolve_container+0x25/0x30
  |  vfio_group_put_external_user+0x13/0x20
  |  kvm_vfio_group_put_external_user+0x27/0x40 [kvm]
  |  kvm_vfio_destroy+0x45/0xb0 [kvm]
  |  kvm_put_kvm+0x1bb/0x2e0 [kvm]
  |  kvm_vm_release+0x22/0x30 [kvm]
  |  __fput+0xcc/0x260
  |  ____fput+0xe/0x10
  |  task_work_run+0x8f/0xb0
  |  do_exit+0x358/0xaf0
  |  ? wake_up_state+0x10/0x20
  |  ? signal_wake_up_state+0x1a/0x30
  |  do_group_exit+0x47/0xb0
  |  __x64_sys_exit_group+0x18/0x20
  |  do_syscall_64+0x57/0x1d0
  |  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix the crash by tracking the subdevices when attaching and detaching
aux-domains.

Fixes: 67b8e02b5e ("iommu/vt-d: Aux-domain specific domain attach/detach")
Co-developed-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 14:35:14 +00:00
Liu Yi L
9ad9f45b3b iommu/vt-d: Move intel_iommu info from struct intel_svm to struct intel_svm_dev
'struct intel_svm' is shared by all devices bound to a give process,
but records only a single pointer to a 'struct intel_iommu'. Consequently,
cache invalidations may only be applied to a single DMAR unit, and are
erroneously skipped for the other devices.

In preparation for fixing this, rework the structures so that the iommu
pointer resides in 'struct intel_svm_dev', allowing 'struct intel_svm'
to track them in its device list.

Fixes: 1c4f88b7f1 ("iommu/vt-d: Shared virtual address in scalable mode")
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Raj Ashok <ashok.raj@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Reported-by: Guo Kaijie <Kaijie.Guo@intel.com>
Reported-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Signed-off-by: Liu Yi L <yi.l.liu@intel.com>
Tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Cc: stable@vger.kernel.org # v5.0+
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-2-git-send-email-yi.l.liu@intel.com
Signed-off-by: Will Deacon <will@kernel.org>
2021-01-07 14:34:36 +00:00
Xu Yilun
ecc1641aca fpga: dfl: move dfl bus related APIs to include/linux/dfl.h
Now the dfl drivers could be made as independent modules and put in
different folders according to their functionalities. In order for
scattered dfl device drivers to include dfl bus APIs, move the
dfl bus APIs to a new header file in the public folder.

[mdf@kernel.org: Fixed up header guards to match filename]

Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-7-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Xu Yilun
9326eecd93 fpga: dfl: move dfl_device_id to mod_devicetable.h
In order to support MODULE_DEVICE_TABLE() for dfl device driver, this
patch moves struct dfl_device_id to mod_devicetable.h

Some brief description for DFL (Device Feature List) is added to make
the DFL known to the whole kernel.

Reviewed-by: Tom Rix <trix@redhat.com>
Acked-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
Link: https://lore.kernel.org/r/20210107043714.991646-5-mdf@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 15:21:27 +01:00
Andrey Konovalov
e89eed02a5 kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
Done opencode in_serving_softirq() checks in in_serving_softirq() to avoid
cluttering the code, hide them in kcov helpers instead.

Fixes: aee9ddb1d3 ("kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq")
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/aeb430c5bb90b0ccdf1ec302c70831c1a47b9c45.1609876340.git.andreyknvl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-07 14:17:29 +01:00
Daniel Vetter
cb3cfbf79a drm-misc-next for v5.12:
Core Changes:
 - Lots of drm documentation updates by Simor Ser.
 - Require that each crtc has a unique primary plane.
 - Add fixme that fbdev_generic_setup is confusing.
 
 Driver Changes:
 - Update addresses for TI display drivers maintainers.
 - Make DRM_VIRTIO_GPU select VIRTIO.
 - Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl/1mzYACgkQ/lWMcqZw
 E8MdUA/6AkcEoz3PQfEASx3jtcbriMEJBedEczDcJize8qHdRtxvnh0hGnD7uavC
 YrasrhVqB6MgFGdQYaTmjrxVJ+0kgio5E6V9GENgaSQQ8DBwmVFdGW6DWroq0+Ia
 LXZIlpc4p1ujglB38O8izXRmAE0BX9EvtO7nhWyNs8mTMpj/jpvnWbLnHOlxGGGo
 3megOsDXywZ+33bHYIUipl0/rRauu2W13elmj+SBJmKa99qqAosoPLaxXMKCuyhf
 4meNwtSXcLgDqsuoXFi6n+0hNqf1QaKX2gU8E8itHTybkeooKAG1bSM/PQs/YdE0
 rlZm2S2JCL3ht4FeGpITrkDOjvqZaL7UKqjLSYpV+gOcDMLM8uj+aHdVwpsFtWuk
 aQbYt9VQDjiaO7gzDAmjbt8pr9mGhuRsfYDn5FjzVZxk8uaF3JU/vHxkd8vLGdQK
 AseG+qmu/cEzyeHYnClrC1tGQYsO5YFxU0iC6ieqlUZfMzB+kKH0LJfjgu3RcT59
 WIyeJlQqncKu66UAkD+za0cNhHXxRwW12LjVHpY09ravFeROUfp7w9SoHwMhF9Um
 xpvDtU1RF+X7YaCFxHVZ9CEx3+upQXByiOPP9LXln/H0zxBTKL6mJXjUDQici5ys
 WeQoUTpeC/UbFcmMph5CPLOBliwigxDOgkOZmihPaslw8MH4nTs=
 =hp3d
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2021-01-06' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

Core Changes:
- Lots of drm documentation updates by Simor Ser.
- Require that each crtc has a unique primary plane.
- Add fixme that fbdev_generic_setup is confusing.

Driver Changes:
- Update addresses for TI display drivers maintainers.
- Make DRM_VIRTIO_GPU select VIRTIO.
- Small fixes to qxl, virtio, hisilicon, tve200, panel/s6e63m0.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fdfbfd7a-b91d-3f59-11c8-984704ce0ee1@linux.intel.com
2021-01-07 13:40:20 +01:00
Daniel Vetter
73dc923eeb - Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
 - R-Car DU miscellaneous fixes
 - Miscellaneous bridge and bridge bindings fixes
 - Assorted misc driver cleanups
 - Constify drm_driver for PCI devices
 -----BEGIN PGP SIGNATURE-----
 
 iQJWBAABCgBAFiEEy51od1KYIM1TCZsbZficN7xUIQ0FAl/z+e0iHGxhdXJlbnQu
 cGluY2hhcnRAaWRlYXNvbmJvYXJkLmNvbQAKCRBl+Jw3vFQhDc4jEAC0jEoDN8IK
 dEF/3DrG7P6v5FDk/+XqEkXYXLq/lJAVVKialQOn0mWYpdHOZn3POww7RM2qmvkp
 M3pJHx915Gq+McrAIehVuA8DFTIblUvX8iJYFhfXnIDJPccd2nCl34P914B8y4X+
 jEJxDu5eHaiEavUrWttGOJQfP80V0b2pGFD1m85WA3DOtpgKFK12l3UqVrOIIYp3
 kwaDYCN29hImmSOM1+PJjna2ZTaY1sJ4SWJzl5yHHLzWw6kf2RuA6hkMvhDuCZWW
 C/NlN4vYYDQKteMzG5jI1eijjkR0nl0S8MmS+ZMh2vPfDkDDnweZwKHbPZ90BLJi
 5yd6OeVkhFIn75JQk8XDEwYnsAAdK6CWsfKscCsemda7TPL9J7xniSuWUKTuG9TM
 axJl2/VLxpO/99vGA1yBByg4Ypuq3tY2iPFWVKgSPZ5F4di28Q5ZJzkv1Ul9CJoK
 7gHLk2ZM4bnsaNxhGjQB1IMZwnfBpmrddXQYDBPGvUpGDX3K4dJItA+vGR5FnKAH
 pJSC+C1JPI6OzDH6MLg4uolMFR3iMpnqffHtpLl/ElwbNk9VP6qArfihNmdYicgT
 UNbsQnOLCA9NBmGTaEy78DOzgrgvtxvc8KvUyXlgiXy8DWLwkShVgWoI4FJw7cTQ
 xxd6CER00mi43i6NfxNBnlO0vMLY4bPeeA==
 =eQ9W
 -----END PGP SIGNATURE-----

Merge tag 'du-next-20210105' of git://linuxtv.org/pinchartl/media into drm-next

- Add default modes for connectors in unknown state
- R-Car DU conversion to DRM-managed API
- R-Car DU miscellaneous fixes
- Miscellaneous bridge and bridge bindings fixes
- Assorted misc driver cleanups
- Constify drm_driver for PCI devices

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/X/P8IOrVXkTpLeCm@pendragon.ideasonboard.com
2021-01-07 13:02:57 +01:00
Daniel Vetter
ca765c731e - Display hotplug fix for gen2/gen3 (Chris)
- Remove trailing semicolon (Tom)
 - Suppress display warnings for old ifwi presend on our CI (Chris)
 - OA/Perf related workaround (Lionel)
 - Replace I915_READ/WRITE per new uncore and display read/write functions (Jani)\
 .
 - PSR improvements (Jose)
 - HDR and other color changes on LSPCON (Uma, Ville)
 - FBC fixes for TGL (Uma)
 - Record plane update times for debugging (Chris)
 - Refactor panel backlight control functions (Dave)
 - Display power improvements (Imre)
 - Add VRR register definition (Manasi)
 - Atomic modeset improvements for bigjoiner pipes (Ville)
 - Switch off the scanout during driver unregister (Chris)
 - Clean-up DP's FEW enable (Manasi)
 - Fix VDSCP slice count (Manasi)
 - Fix and clean up around rc_model_size for DSC (Jani)
 - Remove Type-C noisy debug warn message (Sean)
 - Display HPD code clean-up (Ville)
 - Refactor Intel Display (Dave)
 - Start adding support for Intel's eDP backlight controls (Lyude)
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEbSBwaO7dZQkcLOKj+mJfZA7rE8oFAl/zg+sACgkQ+mJfZA7r
 E8rQxQf+I1sRI+7hyUxJ3V2bYayY1MIlw5W4wMqe2WX+NXd3/1RIQlXKZke9SFz5
 E2Q3XMFa9Q3XWSIW4W4+ro0uoj4uXTpCfwsHY2W7CkkroILlYbLT+pL7TjJ2fkBg
 ZbEScaXnQfwiicVKXmz4zbYud9isQCyQpBHUPteBxhhD01eE6yqABv/mg6+hSujE
 9q4Dhp2ozSL+4YiRO6gQ6rOcqx7fIBKXwNyd9wTNnv7UFw8iRmjkr8eLVwUC7MlM
 h+2uTaFY+hxxnGHPWpwxek6jhrmMk2o9ItxzaBpSVXbvVWRbHoUUSeqeAvGBBvZS
 O5QoufH98Sg07lc5664Dk4nMgeTHYg==
 =zIiA
 -----END PGP SIGNATURE-----

Merge tag 'drm-intel-next-2021-01-04' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Display hotplug fix for gen2/gen3 (Chris)
- Remove trailing semicolon (Tom)
- Suppress display warnings for old ifwi presend on our CI (Chris)
- OA/Perf related workaround (Lionel)
- Replace I915_READ/WRITE per new uncore and display read/write functions (Jani)
- PSR improvements (Jose)
- HDR and other color changes on LSPCON (Uma, Ville)
- FBC fixes for TGL (Uma)
- Record plane update times for debugging (Chris)
- Refactor panel backlight control functions (Dave)
- Display power improvements (Imre)
- Add VRR register definition (Manasi)
- Atomic modeset improvements for bigjoiner pipes (Ville)
- Switch off the scanout during driver unregister (Chris)
- Clean-up DP's FEW enable (Manasi)
- Fix VDSCP slice count (Manasi)
- Fix and clean up around rc_model_size for DSC (Jani)
- Remove Type-C noisy debug warn message (Sean)
- Display HPD code clean-up (Ville)
- Refactor Intel Display (Dave)
- Start adding support for Intel's eDP backlight controls (Lyude)

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104211018.GA1094707@intel.com
2021-01-07 12:20:29 +01:00
Daniel Vetter
e240cc7665 drm/imx: fixes and drm managed resources
- Reduce stack usage in ipu-di.
 - Fix imx-ldb for compile tests.
 - Make drm encoder control functions optional.
 - Add drm managed variants drmm_encoder_alloc(),
   drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
   drmm_crtc_alloc_with_planes() for drm_encoder_init(),
   drm_simple_encoder_init(), drm_universal_plane_init(), and
   drm_crtc_init_with_planes(), respectively.
 - Update imx-drm to use the new functions for drm managed resource
   allocation, moving initialization from bind to probe where possible.
 - Fix imx-tve clock provider leak.
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCX/M62RcccC56YWJlbEBw
 ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwPdlAP4/zZ401iFrj+ZiRTYFNGHaRrBI
 ldQ97lk2Ndzgp5tHzQD/dsAMFymw5+fYlp2xa25kB4LQJLzOC+KzlZwFKF5W4QM=
 =I3bV
 -----END PGP SIGNATURE-----

Merge tag 'imx-drm-next-2021-01-04' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: fixes and drm managed resources

- Reduce stack usage in ipu-di.
- Fix imx-ldb for compile tests.
- Make drm encoder control functions optional.
- Add drm managed variants drmm_encoder_alloc(),
  drmm_simple_encoder_alloc(), drmm_universal_plane_alloc(), and
  drmm_crtc_alloc_with_planes() for drm_encoder_init(),
  drm_simple_encoder_init(), drm_universal_plane_init(), and
  drm_crtc_init_with_planes(), respectively.
- Update imx-drm to use the new functions for drm managed resource
  allocation, moving initialization from bind to probe where possible.
- Fix imx-tve clock provider leak.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
[danvet: Fix conflict between doc changes by both Philipp and Simon
Ser, see 9999587b68 ("drm: rework description of primary and cursor
planes")]
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/c745fc1596898932c9454fd2979297b4242566a2.camel@pengutronix.de
2021-01-07 11:24:50 +01:00
Daniel Vetter
5beed15e4b Merge tag 'topic/dp-hdmi-2.1-pcon-2020-12-23' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
Add support for DP-HDMI2.1 PCON

From the series cover letter:

This patch series attempts to add support for a DP-HDMI2.1 Protocol
Convertor. The VESA spec for the HDMI2.1 PCON are proposed in Errata
E5 to DisplayPort_v2.0:
https://vesa.org/join-vesamemberships/member-downloads/?action=stamp&fileid=42299
The details are mentioned in:
VESA DP-to-HDMI PCON Specification Standalone Document
https://groups.vesa.org/wg/DP/document/15651

This series starts with adding support for FRL (Fixed Rate Link)
Training between the PCON and HDMI2.1 sink.
As per HDMI2.1 specification, a new data-channel or lane is added in
FRL mode, by repurposing the TMDS clock Channel. Through FRL, higher
bit-rate can be supported, ie. up to 12 Gbps/lane (48 Gbps over 4
lanes).

With these patches, the HDMI2.1 PCON can be configured to achieve FRL
training based on the maximum FRL rate supported by the panel, source
and the PCON.
The approach is to add the support for FRL training between PCON and
HDMI2.1 sink and gradually add other blocks for supporting higher
resolutions and other HDMI2.1 features, that can be supported by pcon
for the sources that do not natively support HDMI2.1.

This is done before the DP Link training between the source and PCON
is started. In case of FRL training is not achieved, the PCON will
work in the regular TMDS mode, without HDMI2.1 feature support.
Any interruption in FRL training between the PCON and HDMI2.1 sink is
notified through IRQ_HPD. On receiving the IRQ_HPD the concerned DPCD
registers are read and FRL training is re-attempted.

Currently, we have tested the FRL training and are able to enable 4K
display with TGL Platform + Realtek PCON RTD2173 with HDMI2.1 supporting
panel.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lfdpndkt.fsf@intel.com
2021-01-07 11:02:25 +01:00
Daniel Vetter
18589d74f4 drm-misc-next for v5.12:
UAPI Changes:
 - Not necessarily one, but we document that userspace needs to force probe connectors.
 
 Cross-subsystem Changes:
 - Require FB_ATY_CT for aty on sparc64.
 - video: Fix documentation, and a few compiler warnings.
 - Add devicetree bindings for DP connectors.
 - dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.
 
 Core Changes:
 - ttm: Warn when releasing a pinned bo.
 - ttm: Cleanup bo size handling.
 - cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
 - Split drm_prime_sg_to_page_addr_arrays into 2 functions.
 - Add a new api to install irq using devm.
 - Update panel kerneldoc to inline style.
 - Add DP support to drm/bridge.
 - Assorted small fixes to ttm, fb-helper, scheduler.
 - Add atomic_commit_setup function callback.
 - Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
 - Allow using degamma for legacy gamma if gamma is not available.
 - Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
 - ttm: Cleanup the lru handler.
 
 Driver Changes:
 - Add pm support to ingenic.
 - Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
 - Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
 - Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
 - Cleanup compiler and docbook warnings in a lot of fbdev devices.
 - Use the drmm_vram_helper in hisilicon.
 - Add support for BCM2711 DSI1 in vc4.
 - Add support for 8-bit delta RGB panels to ingenic.
 - Add documentation on how to test vkms.
 - Convert vc4 to atomic helpers.
 - Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
 - Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
 - More refactoring of omap dsi code.
 - Enable 10/12 bpc outputs in vc4.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEuXvWqAysSYEJGuVH/lWMcqZwE8MFAl/bLtAACgkQ/lWMcqZw
 E8M5mBAAs6iA3giF+LrzQzszZqOFmtExwjHsvJXDtiINrVubdRov2XbbaOZ+8Eax
 Cnnc5QzokJV8v1IReImz+cP7i4uXyWmwQsthY2WvHYLXZmZfZUV+rK4cCtJIKXlR
 9EvkEFtdPZ6OpyJ8p1G0r/UNqXxqOl4pEhp6NZdSj1mscz2yux/BuqX+1tX1j5+G
 SIfwcKIY+nIwnVpKwhJplJNfFwthRzENxq2KMt+PGLcpOWLHEgwqzKoR+ddTcKf2
 Nk1w2OERbnBVRt8NzCIeyczlSp4QuB+NpE5mFEBedmLatGYqwAIwPMt22AVRP9rc
 SdXqjVxg3UJ5UNMYXQwjrnJq1nIm1ViYt7za/e2aMC8g9oI7tNQ5uI7XViO6+tk5
 3vQV40pHVfMLGzkzqGhv9qHYAkkc+gPMAXwObuzmYppVVZn8dnrkAco7Ib8WPrRc
 g8JD0bpIsOrgqCTj2W54fC/ZP7hQZpffOrxWY7alhlriEl4E7To6OvTwEavIzxCm
 ajkO129oItOcATDTGiUV3JRWCTdCj4cNz7cQi4pC2QgaUIy8twjm57V8nnFDUCNg
 ifi1dIY24DOrHxdmZ8sAWZRoPzcl5a84c8EqEkGZieEsdr3Za4XMZD8tqI2uSJrU
 x+OfqgfvqNZenkuc+SUDZJQ855iqdkzJcqZnkAn61VpPh7XCtxk=
 =orEC
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-next-2020-12-17' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v5.12:

UAPI Changes:
- Not necessarily one, but we document that userspace needs to force probe connectors.

Cross-subsystem Changes:
- Require FB_ATY_CT for aty on sparc64.
- video: Fix documentation, and a few compiler warnings.
- Add devicetree bindings for DP connectors.
- dma-buf: Update kernel-doc, and add might_lock for resv objects in begin/end_cpu_access.

Core Changes:
- ttm: Warn when releasing a pinned bo.
- ttm: Cleanup bo size handling.
- cma-helper: Remove prime infix, and implement mmap as GEM CMA functions.
- Split drm_prime_sg_to_page_addr_arrays into 2 functions.
- Add a new api to install irq using devm.
- Update panel kerneldoc to inline style.
- Add DP support to drm/bridge.
- Assorted small fixes to ttm, fb-helper, scheduler.
- Add atomic_commit_setup function callback.
- Automatically use the atomic gamma_set, instead of forcing drivers to declare the default atomic version.
- Allow using degamma for legacy gamma if gamma is not available.
- Clarify that primary/cursor planes are not tied to 1 crtc (depending on possible_crtcs).
- ttm: Cleanup the lru handler.

Driver Changes:
- Add pm support to ingenic.
- Assorted small fixes in radeon, via, rockchip, omap2fb, kmb, gma500, nouveau, virtio, hisilicon, ingenic, s6e63m0 panel, ast, udlfb.
- Add BOE NV110WTM-N61, ys57pss36bh5gq, Khadas TS050 panels.
- Stop using pages with drm_prime_sg_to_page_addr_arrays, and switch all callers to use ttm_sg_tt_init.
- Cleanup compiler and docbook warnings in a lot of fbdev devices.
- Use the drmm_vram_helper in hisilicon.
- Add support for BCM2711 DSI1 in vc4.
- Add support for 8-bit delta RGB panels to ingenic.
- Add documentation on how to test vkms.
- Convert vc4 to atomic helpers.
- Use degamma instead of gamma table in omap, to add support for CTM and color encoding/range properties.
- Rework omap DSI code, and merge all omapdrm modules now that the last omap panel is now a drm panel.
- More refactoring of omap dsi code.
- Enable 10/12 bpc outputs in vc4.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/78381a4f-45fd-aed4-174a-94ba051edd37@linux.intel.com
2021-01-07 10:46:32 +01:00
Paul E. McKenney
1afb95fee0 torture: Maintain torture-specific set of CPUs-online books
The TREE01 rcutorture scenario intentionally creates confusion as to the
number of available CPUs by specifying the "maxcpus=8 nr_cpus=43" kernel
boot parameters.  This can disable rcutorture's load shedding, which
currently uses num_online_cpus(), which would count the extra 35 CPUs.
However, the rcutorture guest OS will be provisioned with only 8 CPUs,
which means that rcutorture will present full load even when all but one
of the original 8 CPUs are offline.  This can result in spurious errors
due to extreme overloading of that single remaining CPU.

This commit therefore keeps a separate set of books on the number of
usable online CPUs, so that torture_num_online_cpus() is used for load
shedding instead of num_online_cpus().  Note that initial sizing must
use num_online_cpus() because torture_num_online_cpus() will return
NR_CPUS until shortly after torture_onoff_init() is invoked.

Reported-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Apply feedback from kernel test robot. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:22 -08:00
Paul E. McKenney
8a67a20bf2 torture: Throttle VERBOSE_TOROUT_*() output
This commit adds kernel boot parameters torture.verbose_sleep_frequency
and torture.verbose_sleep_duration, which allow VERBOSE_TOROUT_*() output
to be throttled with periodic sleeps on large systems.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:21 -08:00
Paul E. McKenney
ae19aaafae torture: Add fuzzed hrtimer-based sleep functions
This commit adds torture_hrtimeout_ns(), torture_hrtimeout_us(),
torture_hrtimeout_ms(), torture_hrtimeout_jiffies(), and
torture_hrtimeout_s(), each of which uses hrtimers to block for a fuzzed
time interval.  These functions are intended to be used by the various
torture tests to decouple wakeups from the timer wheel, thus providing
more opportunity for Murphy to insert destructive race conditions.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 17:17:19 -08:00
Frederic Weisbecker
dcd42591eb timer: Add timer_curr_running()
This commit adds a timer_curr_running() function that verifies that the
current code is running in the context of the specified timer's handler.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:59 -08:00
Frederic Weisbecker
43759fe5a1 cpu/hotplug: Add lockdep_is_cpus_held()
This commit adds a lockdep_is_cpus_held() function to verify that the
proper locks are held and that various operations are running in the
correct context.

Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:59 -08:00
Frederic Weisbecker
254e11efde rcu/nocb: Re-offload support
To re-offload the callback processing off of a CPU, it is necessary to
clear SEGCBLIST_SOFTIRQ_ONLY, set SEGCBLIST_OFFLOADED, and then notify
both the CB and GP kthreads so that they both set their own bit flag and
start processing the callbacks remotely.  The re-offloading worker is
then notified that it can stop the RCU_SOFTIRQ handler (or rcuc kthread,
as the case may be) from processing the callbacks locally.

Ordering must be carefully enforced so that the callbacks that used to be
processed locally without locking will have the same ordering properties
when they are invoked by the nocb CB and GP kthreads.

This commit makes this change.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Export rcu_nocb_cpu_offload(). ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:25 -08:00
Frederic Weisbecker
d97b078182 rcu/nocb: De-offloading CB kthread
To de-offload callback processing back onto a CPU, it is necessary to
clear SEGCBLIST_OFFLOAD and notify the nocb CB kthread, which will then
clear its own bit flag and go to sleep to stop handling callbacks.  This
commit makes that change.  It will also be necessary to notify the nocb
GP kthread in this same way, which is the subject of a follow-on commit.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
[ paulmck: Add export per kernel test robot feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:19 -08:00
Frederic Weisbecker
8d346d438f rcu/nocb: Provide basic callback offloading state machine bits
Offloading and de-offloading RCU callback processes must be done
carefully.  There must never be a time at which callback processing is
disabled because the task driving the offloading or de-offloading might be
preempted or otherwise stalled at that point in time, which would result
in OOM due to calbacks piling up indefinitely.  This implies that there
will be times during which a given CPU's callbacks might be concurrently
invoked by both that CPU's RCU_SOFTIRQ handler (or, equivalently, that
CPU's rcuc kthread) and by that CPU's rcuo kthread.

This situation could fatally confuse both rcu_barrier() and the
CPU-hotplug offlining process, so these must be excluded during any
concurrent-callback-invocation period.  In addition, during times of
concurrent callback invocation, changes to ->cblist must be protected
both as needed for RCU_SOFTIRQ and as needed for the rcuo kthread.

This commit therefore defines and documents the states for a state
machine that coordinates offloading and deoffloading.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:19 -08:00
Frederic Weisbecker
65e560327f rcu/nocb: Turn enabled/offload states into a common flag
This commit gathers the rcu_segcblist ->enabled and ->offloaded property
field into a single ->flags bitmask to avoid further proliferation of
individual u8 fields in the structure.  This change prepares for the
state formerly known as ->offloaded state to be modified at runtime.

Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Neeraj Upadhyay <neeraju@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Inspired-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:19 -08:00
Joel Fernandes (Google)
3afe7fa535 rcu/trace: Add tracing for how segcb list changes
This commit adds tracing to track how the segcb list changes before/after
acceleration, during queuing and during dequeuing.

This tracing helped discover an optimization that avoided needless GP
requests when no callbacks were accelerated. The tracing overhead is
minimal as each segment's length is now stored in the respective segment.

Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:19 -08:00
Joel Fernandes (Google)
ae5c2341ed rcu/segcblist: Add counters to segcblist datastructure
Add counting of segment lengths of segmented callback list.

This will be useful for a number of things such as knowing how big the
ready-to-execute segment have gotten. The immediate benefit is ability
to trace how the callbacks in the segmented callback list change.

Also this patch remove hacks related to using donecbs's ->len field as a
temporary variable to save the segmented callback list's length. This cannot be
done anymore and is not needed.

Also fix SRCU:
The negative counting of the unsegmented list cannot be used to adjust
the segmented one. To fix this, sample the unsegmented length in
advance, and use it after CB execution to adjust the segmented list's
length.

Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-06 16:24:19 -08:00
Maximilian Luz
fc00bc8ac1 platform/surface: Add Surface ACPI Notify driver
The Surface ACPI Notify (SAN) device provides an ACPI interface to the
Surface Aggregator EC, specifically the Surface Serial Hub interface.
This interface allows EC requests to be made from ACPI code and can
convert a subset of EC events back to ACPI notifications.

Specifically, this interface provides a GenericSerialBus operation
region ACPI code can execute a request by writing the request command
data and payload to this operation region and reading back the
corresponding response via a write-then-read operation. Furthermore,
this interface provides a _DSM method to be called when certain events
from the EC have been received, essentially turning them into ACPI
notifications.

The driver provided in this commit essentially takes care of translating
the request data written to the operation region, executing the request,
waiting for it to finish, and finally writing and translating back the
response (if the request has one). Furthermore, this driver takes care
of enabling the events handled via ACPI _DSM calls. Lastly, this driver
also exposes an interface providing discrete GPU (dGPU) power-on
notifications on the Surface Book 2, which are also received via the
operation region interface (but not handled by the SAN driver directly),
making them accessible to other drivers (such as a dGPU hot-plug driver
that may be added later on).

On 5th and 6th generation Surface devices (Surface Pro 5/2017, Pro 6,
Book 2, Laptop 1 and 2), the SAN interface provides full battery and
thermal subsystem access, as well as other EC based functionality. On
those models, battery and thermal sensor devices are implemented as
standard ACPI devices of that type, however, forward ACPI calls to the
corresponding Surface Aggregator EC request via the SAN interface and
receive corresponding notifications (e.g. battery information change)
from it. This interface is therefore required to provide said
functionality on those devices.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-10-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-07 00:06:39 +01:00
Maximilian Luz
178f6ab77e platform/surface: Add Surface Aggregator user-space interface
Add a misc-device providing user-space access to the Surface Aggregator
EC, mainly intended for debugging, testing, and reverse-engineering.
This interface gives user-space applications the ability to send
requests to the EC and receive the corresponding responses.

The device-file is managed by a pseudo platform-device and corresponding
driver to avoid dependence on the dedicated bus, allowing it to be
loaded in a minimal configuration.

A python library and scripts to access this device can be found at [1].

[1]: https://github.com/linux-surface/surface-aggregator-module/tree/master/scripts/ssam

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-9-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-07 00:06:39 +01:00
Maximilian Luz
eb0e90a820 platform/surface: aggregator: Add dedicated bus and device type
The Surface Aggregator EC provides varying functionality, depending on
the Surface device. To manage this functionality, we use dedicated
client devices for each subsystem or virtual device of the EC. While
some of these clients are described as standard devices in ACPI and the
corresponding client drivers can be implemented as platform drivers in
the kernel (making use of the controller API already present), many
devices, especially on newer Surface models, cannot be found there.

To simplify management of these devices, we introduce a new bus and
client device type for the Surface Aggregator subsystem. The new device
type takes care of managing the controller reference, essentially
guaranteeing its validity for as long as the client device exists, thus
alleviating the need to manually establish device links for that purpose
in the client driver (as has to be done with the platform devices).

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-7-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-07 00:06:39 +01:00
Maximilian Luz
c167b9c7e3 platform/surface: Add Surface Aggregator subsystem
Add Surface System Aggregator Module core and Surface Serial Hub driver,
required for the embedded controller found on Microsoft Surface devices.

The Surface System Aggregator Module (SSAM, SAM or Surface Aggregator)
is an embedded controller (EC) found on 4th and later generation
Microsoft Surface devices, with the exception of the Surface Go series.
This EC provides various functionality, depending on the device in
question. This can include battery status and thermal reporting (5th and
later generations), but also HID keyboard (6th+) and touchpad input
(7th+) on Surface Laptop and Surface Book 3 series devices.

This patch provides the basic necessities for communication with the SAM
EC on 5th and later generation devices. On these devices, the EC
provides an interface that acts as serial device, called the Surface
Serial Hub (SSH). 4th generation devices, on which the EC interface is
provided via an HID-over-I2C device, are not supported by this patch.

Specifically, this patch adds a driver for the SSH device (device HID
MSHW0084 in ACPI), as well as a controller structure and associated API.
This represents the functional core of the Surface Aggregator kernel
subsystem, introduced with this patch, and will be expanded upon in
subsequent commits.

The SSH driver acts as the main attachment point for this subsystem and
sets-up and manages the controller structure. The controller in turn
provides a basic communication interface, allowing to send requests from
host to EC and receiving the corresponding responses, as well as
managing and receiving events, sent from EC to host. It is structured
into multiple layers, with the top layer presenting the API used by
other kernel drivers and the lower layers modeled after the serial
protocol used for communication.

Said other drivers are then responsible for providing the (Surface model
specific) functionality accessible through the EC (e.g. battery status
reporting, thermal information, ...) via said controller structure and
API, and will be added in future commits.

Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201221183959.1186143-2-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2021-01-06 23:45:33 +01:00
Al Viro
7facdc426f [amd64] clean PRSTATUS_SIZE/SET_PR_FPVALID up properly
To get rid of hardcoded size/offset in those macros we need to have
a definition of i386 variant of struct elf_prstatus.  However, we can't
do that in asm/compat.h - the types needed for that are not there and
adding an include of asm/user32.h into asm/compat.h would cause a lot
of mess.

That could be conveniently done in elfcore-compat.h, but currently there
is nowhere to put arch-dependent parts of it - no asm/elfcore-compat.h.
So we introduce a new file (asm/elfcore-compat.h, present on architectures
that have CONFIG_ARCH_HAS_ELFCORE_COMPAT set, currently only on x86),
have it pulled by linux/elfcore-compat.h and move the definitions there.

As a side benefit, we don't need to worry about accidental inclusion of
that file into binfmt_elf.c itself, so we don't need the dance with
COMPAT_PRSTATUS_SIZE, etc. - only fs/compat_binfmt_elf.c will see
that header.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-06 08:40:56 -05:00
Al Viro
f2485a2dc9 elf_prstatus: collect the common part (everything before pr_reg) into a struct
Preparations to doing i386 compat elf_prstatus sanely - rather than duplicating
the beginning of compat_elf_prstatus, take these fields into a separate
structure (compat_elf_prstatus_common), so that it could be reused.  Due to
the incestous relationship between binfmt_elf.c and compat_binfmt_elf.c we
need the same shape change done to native struct elf_prstatus, gathering the
fields prior to pr_reg into a new structure (struct elf_prstatus_common).

Fortunately, offset of pr_reg is always a multiple of 16 with no padding
right before it, so it's possible to turn all the stuff prior to it into
a single member without disturbing the layout.

[build fix from Geert Uytterhoeven folded in]

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-06 08:38:29 -05:00