Commit graph

131,169 commits

Author SHA1 Message Date
Sowjanya Komatineni
98621ed011
spi: spi-mem: Mark dummy transfers by setting dummy_data bit
This patch marks dummy transfer by setting dummy_data bit to 1.

Controllers supporting dummy transfer by hardware use this bit field
to skip software transfer of dummy bytes and use hardware dummy bytes
transfer.

Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-6-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-06 13:09:31 +00:00
Sowjanya Komatineni
b499779761
dt-bindings: clock: tegra: Add clock ID TEGRA210_CLK_QSPI_PM
Tegra210 QSPI clock output has divider DIV2_SEL which will be enabled
when using DDR interface mode.

This patch adds clock ID for this to dt-binding.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1608585459-17250-2-git-send-email-skomatineni@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-06 13:09:27 +00:00
Samuel Holland
0482a4e6de clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset
While no information about the H6 RSB controller is included in the
datasheet or manual, the vendor BSP and power management blob both
reference the RSB clock parent and register address. These values were
verified by experimentation.

Since this clock/reset are added late, the specifier is added at the end
to maintain the existing DT binding. The code is kept in register order.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
2021-01-06 19:34:29 +08:00
Bjorn Andersson
8527efc59d rpmsg: glink: Guard qcom_glink_ssr_notify() with correct config
The qcom_glink_ssr_notify() function doesn't relate to the SMEM specific
GLINK config, but the common RPMSG_QCOM_GLINK config. Update the guard
to properly reflect this.

Reviewed-by: Alex Elder <elder@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210106035905.4153692-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-01-05 22:22:07 -06:00
Jakub Kicinski
cf07206971 net: suggest L2 discards be counted towards rx_dropped
From the existing definitions it's unclear which stat to
use to report filtering based on L2 dst addr in old
broadcast-medium Ethernet.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-05 16:23:57 -08:00
Vineet Gupta
f4d9359de8 include/soc: remove headers for EZChip NPS
NPS platform has been removed from ARC port and there are no in-tree
user of it now . So RIP !

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2021-01-05 12:59:41 -08:00
Utkarsh Patel
8553a979fc
platform/chrome: cros_ec_typec: Send mux configuration acknowledgment to EC
In some corner cases downgrade of the superspeed typec device(e.g. Dell
typec Dock, apple dongle) was seen because before the SOC mux configuration
finishes, EC starts configuring the next mux state.

With this change, once the SOC mux is configured, kernel will send an
acknowledgment to EC via Host command EC_CMD_USB_PD_MUX_ACK [1].
After sending the host event EC will wait for the acknowledgment from
kernel before starting the PD negotiation for the next mux state. This
helps to have a framework to build better error handling along with the
synchronization of timing sensitive mux states.

This change also brings in corresponding EC header updates from the EC code
base [1].

[1]:
https://chromium.googlesource.com/chromiumos/platform/ec/+/refs/heads/master/include/ec_commands.h

Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com>
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Benson Leung <bleung@chromium.org>
Link: https://lore.kernel.org/r/20201210060903.2205-3-utkarsh.h.patel@intel.com
2021-01-05 12:57:15 -08:00
Linus Torvalds
aa35e45cd4 Networking fixes for 5.11-rc3, including fixes from netfilter, wireless
and bpf trees.
 
 Current release - regressions:
 
  - mt76: - usb: fix NULL pointer dereference in mt76u_status_worker
          - sdio: fix NULL pointer dereference in mt76s_process_tx_queue
 
  - net: ipa: fix interconnect enable bug
 
 Current release - always broken:
 
  - netfilter: ipset: fixes possible oops in mtype_resize
 
  - ath11k: fix number of coding issues found by static analysis tools
            and spurious error messages
 
 Previous releases - regressions:
 
  - e1000e: re-enable s0ix power saving flows for systems with
            the Intel i219-LM Ethernet controllers to fix power
 	   use regression
 
  - virtio_net: fix recursive call to cpus_read_lock() to avoid
                a deadlock
 
  - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()
 
  - net-sysfs: take the rtnl lock around XPS configuration
 
  - xsk: - fix memory leak for failed bind
         - rollback reservation at NETDEV_TX_BUSY
 
  - r8169: work around power-saving bug on some chip versions
 
 Previous releases - always broken:
 
  - dcb: validate netlink message in DCB handler
 
  - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
         to prevent unnecessary retries
 
  - vhost_net: fix ubuf refcount when sendmsg fails
 
  - bpf: save correct stopping point in file seq iteration
 
  - ncsi: use real net-device for response handler
 
  - neighbor: fix div by zero caused by a data race (TOCTOU)
 
  - bareudp: - fix use of incorrect min_headroom size
             - fix false positive lockdep splat from the TX lock
 
  - net: mvpp2: - clear force link UP during port init procedure
                  in case bootloader had set it
                - add TCAM entry to drop flow control pause frames
 	       - fix PPPoE with ipv6 packet parsing
 	       - fix GoP Networking Complex Control config of port 3
 	       - fix pkt coalescing IRQ-threshold configuration
 
  - xsk: fix race in SKB mode transmit with shared cq
 
  - ionic: account for vlan tag len in rx buffer len
 
  - net: stmmac: ignore the second clock input, current clock framework
                 does not handle exclusive clock use well, other drivers
 		may reconfigure the second clock
 Misc:
 
  - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
         existing scheme
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl/zsqQACgkQMUZtbf5S
 IrvfqA/+MbjN9TRccZRgYVzPVzlP5jswi7VZIjikPrNxCdwgQd8bDMfeaD6I1PcX
 WHf35vtD8zh729qz9DheWXFp7kDQ1fY0Z59KA25xf/ulFEkZPl3RBg70rSgv4rc+
 T82dVo6x33DPe6NkspDC+Uhjz2IxcS/P7F9N7DtbavrfNuDyX8+0U/FFQIL0xOyG
 DuhwecCh0vJFGcWXTWtK1vP1CPD98L28KS2Od+EZsUUZOKt1WMyGrAgNcT6uYXmO
 NIYNy+FPyvvIwTLupoFE7oU4LA0sZozyvzcTDugXBF5EKoR8BwBFk0FfWzN9Oxge
 LrmhNBSTeYyiw8XMOwSIfxwZnBm7mJFQqTHR1+Y83Qw1SR6PfSUZgkEkW2SYgprL
 9CzE3O3P3Ci7TSx7fvZUn8B1q5J0DfZR6ZYyor9zl55e+ikraRYtXsk47bf9AGXl
 owpHXEYWHFmgOP+LVdf1BUjuiE3vnCBJBsHlMbRkxiNPKravWtPSiM2yTu6fEbpT
 pMXCgFQBL/IqwzX01zuw7teg40YLVaFnmFdQbYDwA5p9VODlQvHzn2K4GyuktswX
 wxHYU5WRWtCkBfE+nbAROKzE7MuH9jtPtV1ZeuseTqYGBRuvEvudX8ypEvKS45pP
 OWkzFsSXd9q7M6cxftipwjcyLiIO+UGdizNHvDUyEQOPAyYPKb4=
 =N4/x
 -----END PGP SIGNATURE-----

Merge tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Networking fixes, including fixes from netfilter, wireless and bpf
  trees.

  Current release - regressions:

   - mt76: fix NULL pointer dereference in mt76u_status_worker and
     mt76s_process_tx_queue

   - net: ipa: fix interconnect enable bug

  Current release - always broken:

   - netfilter: fixes possible oops in mtype_resize in ipset

   - ath11k: fix number of coding issues found by static analysis tools
     and spurious error messages

  Previous releases - regressions:

   - e1000e: re-enable s0ix power saving flows for systems with the
     Intel i219-LM Ethernet controllers to fix power use regression

   - virtio_net: fix recursive call to cpus_read_lock() to avoid a
     deadlock

   - ipv4: ignore ECN bits for fib lookups in fib_compute_spec_dst()

   - sysfs: take the rtnl lock around XPS configuration

   - xsk: fix memory leak for failed bind and rollback reservation at
     NETDEV_TX_BUSY

   - r8169: work around power-saving bug on some chip versions

  Previous releases - always broken:

   - dcb: validate netlink message in DCB handler

   - tun: fix return value when the number of iovs exceeds MAX_SKB_FRAGS
     to prevent unnecessary retries

   - vhost_net: fix ubuf refcount when sendmsg fails

   - bpf: save correct stopping point in file seq iteration

   - ncsi: use real net-device for response handler

   - neighbor: fix div by zero caused by a data race (TOCTOU)

   - bareudp: fix use of incorrect min_headroom size and a false
     positive lockdep splat from the TX lock

   - mvpp2:
      - clear force link UP during port init procedure in case
        bootloader had set it
      - add TCAM entry to drop flow control pause frames
      - fix PPPoE with ipv6 packet parsing
      - fix GoP Networking Complex Control config of port 3
      - fix pkt coalescing IRQ-threshold configuration

   - xsk: fix race in SKB mode transmit with shared cq

   - ionic: account for vlan tag len in rx buffer len

   - stmmac: ignore the second clock input, current clock framework does
     not handle exclusive clock use well, other drivers may reconfigure
     the second clock

  Misc:

   - ppp: change PPPIOCUNBRIDGECHAN ioctl request number to follow
     existing scheme"

* tag 'net-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
  net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
  net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
  net: lapb: Decrease the refcount of "struct lapb_cb" in lapb_device_event
  r8169: work around power-saving bug on some chip versions
  net: usb: qmi_wwan: add Quectel EM160R-GL
  selftests: mlxsw: Set headroom size of correct port
  net: macb: Correct usage of MACB_CAPS_CLK_HW_CHG flag
  ibmvnic: fix: NULL pointer dereference.
  docs: networking: packet_mmap: fix old config reference
  docs: networking: packet_mmap: fix formatting for C macros
  vhost_net: fix ubuf refcount incorrectly when sendmsg fails
  bareudp: Fix use of incorrect min_headroom size
  bareudp: set NETIF_F_LLTX flag
  net: hdlc_ppp: Fix issues when mod_timer is called while timer is running
  atlantic: remove architecture depends
  erspan: fix version 1 check in gre_parse_header()
  net: hns: fix return value check in __lb_other_process()
  net: sched: prevent invalid Scell_log shift count
  net: neighbor: fix a crash caused by mod zero
  ipv4: Ignore ECN bits for fib lookups in fib_compute_spec_dst()
  ...
2021-01-05 12:38:56 -08:00
Linus Torvalds
6207214a70 AFS fixes
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEqG5UsNXhtOCrfGQP+7dXa6fLC2sFAl/znRUACgkQ+7dXa6fL
 C2tCgQ/9Erue3NZlcqHxYtpEUWniUUS39zRmGaPnDvnPqykM4nqN196udMPzeVx1
 U/Uc1y4bQqLy43aPKVqpOMtjsiQfdqRTc1S8iZwd+4tv39R0RuBn2fP6d52cbsj1
 plCS2qHr9YHic+PPlOOZ21uU2hfDwyZwEcbmhaA0TrFq3nLkNqcP1nRKKEtTxhUD
 EG0j2LRDKrBDDWKqo/lwNb81lnyTJsbnuFVWVI11UK1+xjyIkCBc7KZg4kMH+6+r
 Sc7De1qe0w3qYczLKXfKvi4axRkXIKaswvwlEA1+HDXK1HwYuoVgbfnF/Z3ILA5s
 sr4dNx/M+M9CB5OaUG4rnn1VUQwhFK7c2MftR8iaXiYReK1rjV3p+AQ0B8OUDxb7
 un8w0gIdDaaw7qN52iaywXWf+pYKDIqE5IHEm/daNNPfmC9S4vMLLc89tTzvi1aC
 YGH6+dERUtf5lnR2L9z3GodMDuEW3YpLelgVspL7tGYsQm3nvsiIi1vew/QR4qir
 TksjJOwu/0WhHAJD32rnmppiJQ+s5a1N+vo46Ax69fV9YAglNWPPYYUZyY95+mw/
 g5Y8jswCy0h89yq/3nYBMJsgFhFY2LNOOn+1C9PtQxKcXkSubVLh7ssw0aORD52q
 UbdPnG5RoU7UpqmvGnosWIoO+iYAKp23DCIiJLIoR9Ve0RfAx3Q=
 =OQRI
 -----END PGP SIGNATURE-----

Merge tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull AFS fixes from David Howells:
 "Two fixes.

  The first is the fix for the strnlen() array limit check and the
  second fixes the calculation of the number of dirent records used to
  represent any particular filename length"

* tag 'afs-fixes-04012021' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  afs: Fix directory entry size calculation
  afs: Work around strnlen() oops with CONFIG_FORTIFIED_SOURCE=y
2021-01-05 11:55:46 -08:00
Dmitry Osipenko
281462e593 memory: tegra124-emc: Make driver modular
Add modularization support to the Tegra124 EMC driver, which now can be
compiled as a loadable kernel module.

Note that EMC clock must be registered at clk-init time, otherwise PLLM
will be disabled as unused clock at boot time if EMC driver is compiled
as a module. Hence add a prepare/complete callbacks. similarly to what is
done for the Tegra20/30 EMC drivers.

Tested-by: Nicolas Chauvet <kwizart@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20201228154920.18846-2-digetx@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
2021-01-05 18:00:09 +01:00
Shakeel Butt
ac7b79fd19 inotify, memcg: account inotify instances to kmemcg
Currently the fs sysctl inotify/max_user_instances is used to limit the
number of inotify instances on the system. For systems running multiple
workloads, the per-user namespace sysctl max_inotify_instances can be
used to further partition inotify instances. However there is no easy
way to set a sensible system level max limit on inotify instances and
further partition it between the workloads. It is much easier to charge
the underlying resource (i.e. memory) behind the inotify instances to
the memcg of the workload and let their memory limits limit the number
of inotify instances they can create.

With inotify instances charged to memcg, the admin can simply set
max_user_instances to INT_MAX and let the memcg limits of the jobs limit
their inotify instances.

Link: https://lore.kernel.org/r/20201220044608.1258123-1-shakeelb@google.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2021-01-05 14:42:54 +01:00
José Roberto de Souza
7d8ac172d7 drm: Add function to convert rect in 16.16 fixed format to regular format
Much more clear to read one function call than four lines doing this
conversion.

v7:
- function renamed
- calculating width and height before truncate
- inlined

v10:
- renamed parameters from source and destination to src and dst
to match sister functions

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210104205654.238928-1-jose.souza@intel.com
2021-01-05 05:32:52 -08:00
Simon Ser
0e0dc44800
drm/doc: demote old doc-comments in drm.h
Sphinx doesn't like old doc-comments in drm.h and generates warnings
like:

    ./include/uapi/drm/drm.h:87: warning: cannot understand function prototype: 'struct drm_clip_rect '
    ./include/uapi/drm/drm.h:97: warning: cannot understand function prototype: 'struct drm_drawable_info '
    ./include/uapi/drm/drm.h:105: warning: cannot understand function prototype: 'struct drm_tex_region '
    ...

Demote these to regular comments, because converting all of them is
quite a lot of work (also requires documenting all of the struct fields
for instance). Also many of these structures aren't really used by
modern user-space.

We can easily convert these remaining old comments to Sphinx style on a
one-by-one basis.

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-5-contact@emersion.fr
2021-01-05 14:22:07 +01:00
Simon Ser
877c39acf5
drm/doc: re-format drm.h file comment
Our documentation build system chokes on \file comments:

    ./include/uapi/drm/drm.h:2: warning: Cannot understand  * \file drm.h
     on line 2 - I thought it was a doc line

Remove all of the slash-directives, and demote to a normal comment. Keep
the historical information because it predates Git.

v3: keep the comment (Daniel)

Signed-off-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Cc: Pekka Paalanen <ppaalanen@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201222133524.160842-4-contact@emersion.fr
2021-01-05 14:21:35 +01:00
Jun Nie
4ec908d210 dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
The Qualcomm MSM8939 platform has several bus fabrics that could be
controlled and tuned dynamically according to the bandwidth demand.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20201204075345.5161-5-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
2021-01-05 13:10:38 +02:00
Laurent Pinchart
b1dda997a8 drm: Use a const drm_driver for legacy PCI devices
Now that the legacy PCI support code doesn't need to write to the
drm_driver structure, it can be treated as const through the whole DRM
core, unconditionally. This allows declaring the structure as const in
all drivers, removing one possible attack vector.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05 07:20:35 +02:00
Laurent Pinchart
8dbe1b4a15 drm: Move legacy device list out of drm_driver
The drm_driver structure contains a single field (legacy_dev_list) that
is modified by the DRM core, used to store a linked list of legacy DRM
devices associated with the driver. In order to make the structure
const, move the field out to a global variable. This requires locking
access to the global where the local field didn't require serialization,
but this only affects legacy drivers, and isn't in any hot path.

While at it, compile-out the legacy_dev_list field when DRM_LEGACY isn't
defined.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
2021-01-05 07:20:29 +02:00
Laurent Pinchart
47f10854ca drm: Don't export the drm_gem_dumb_destroy() function
The drm_gem_dumb_destroy() isn't used in drivers, don't export it.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05 07:20:25 +02:00
Laurent Pinchart
2551952e80 drm: Add default modes for connectors in unknown state
The DRM CRTC helpers add default modes to connectors in the connected
state if no mode can be retrieved from the connector. This behaviour is
useful for VGA or DVI outputs that have no connected DDC bus. However,
in such cases, the status of the output usually can't be retrieved and
is reported as connector_status_unknown.

Extend the addition of default modes to connectors in an unknown state
to support outputs that can retrieve neither the modes nor the
connection status.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-05 07:19:50 +02:00
Liu Ying
de332bf242 clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks
This patch adds SCU clocks support for i.MX8qxp DC0 subsystem bypass clocks.

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Pengutronix Kernel Team <kernel@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
Cc: Dong Aisheng <aisheng.dong@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-01-05 10:55:05 +08:00
Jakub Kicinski
a8f33c038f Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Missing sanitization of rateest userspace string, bug has been
   triggered by syzbot, patch from Florian Westphal.

2) Report EOPNOTSUPP on missing set features in nft_dynset, otherwise
   error reporting to userspace via EINVAL is misleading since this is
   reserved for malformed netlink requests.

3) New binaries with old kernels might silently accept several set
   element expressions. New binaries set on the NFT_SET_EXPR and
   NFT_DYNSET_F_EXPR flags to request for several expressions per
   element, hence old kernels which do not support for this bail out
   with EOPNOTSUPP.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables: add set expression flags
  netfilter: nft_dynset: report EOPNOTSUPP on missing set feature
  netfilter: xt_RATEEST: reject non-null terminated string from userspace
====================

Link: https://lore.kernel.org/r/20210103192920.18639-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-01-04 14:02:02 -08:00
Paul E. McKenney
8b5bd67cf6 srcu: Provide polling interfaces for Tiny SRCU grace periods
There is a need for a polling interface for SRCU grace
periods, so this commit supplies get_state_synchronize_srcu(),
start_poll_synchronize_srcu(), and poll_state_synchronize_srcu() for this
purpose.  The first can be used if future grace periods are inevitable
(perhaps due to a later call_srcu() invocation), the second if future
grace periods might not otherwise happen, and the third to check if a
grace period has elapsed since the corresponding call to either of the
first two.

As with get_state_synchronize_rcu() and cond_synchronize_rcu(),
the return value from either get_state_synchronize_srcu() or
start_poll_synchronize_srcu() must be passed in to a later call to
poll_state_synchronize_srcu().

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Add EXPORT_SYMBOL_GPL() per kernel test robot feedback. ]
[ paulmck: Apply feedback from Neeraj Upadhyay. ]
Link: https://lore.kernel.org/lkml/20201117004017.GA7444@paulmck-ThinkPad-P72/
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-04 13:53:38 -08:00
Paul E. McKenney
74612a07b8 srcu: Make Tiny SRCU use multi-bit grace-period counter
There is a need for a polling interface for SRCU grace periods.  This
polling needs to distinguish between an SRCU instance being idle on the
one hand or in the middle of a grace period on the other.  This commit
therefore converts the Tiny SRCU srcu_struct structure's srcu_idx from
a defacto boolean to a free-running counter, using the bottom bit to
indicate that a grace period is in progress.  The second-from-bottom
bit is thus used as the index returned by srcu_read_lock().

Link: https://lore.kernel.org/rcu/20201112201547.GF3365678@moria.home.lan/
Reported-by: Kent Overstreet <kent.overstreet@gmail.com>
[ paulmck: Fix ->srcu_lock_nesting[] indexing per Neeraj Upadhyay. ]
Reviewed-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-04 13:53:36 -08:00
Uladzislau Rezki (Sony)
5ea5d1ed57 rcu: Eliminate the __kvfree_rcu() macro
This commit open-codes the __kvfree_rcu() macro, thus saving a
few lines of code and improving readability.

Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-04 13:42:04 -08:00
Uladzislau Rezki (Sony)
5130b8fd06 rcu: Introduce kfree_rcu() single-argument macro
There is a kvfree_rcu() single argument macro that handles pointers
returned by kvmalloc(). Even though it also handles pointer returned by
kmalloc(), readability suffers.

This commit therefore updates the kfree_rcu() macro to explicitly pair
with kmalloc(), thus improving readability.

Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-04 13:42:04 -08:00
Mauro Carvalho Chehab
4704bd3171 list: Fix a typo at the kernel-doc markup
hlist_add_behing -> hlist_add_behind

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2021-01-04 13:35:14 -08:00
Eric Biggers
14e43bf435 vfs: don't unnecessarily clone write access for writable fds
There's no need for mnt_want_write_file() to increment mnt_writers when
the file is already open for writing, provided that
mnt_drop_write_file() is changed to conditionally decrement it.

We seem to have ended up in the current situation because
mnt_want_write_file() used to be paired with mnt_drop_write(), due to
mnt_drop_write_file() not having been added yet.  So originally
mnt_want_write_file() had to always increment mnt_writers.

But later mnt_drop_write_file() was added, and all callers of
mnt_want_write_file() were paired with it.  This makes the compatibility
between mnt_want_write_file() and mnt_drop_write() no longer necessary.

Therefore, make __mnt_want_write_file() and __mnt_drop_write_file() skip
incrementing mnt_writers on files already open for writing.  This
removes the only caller of mnt_clone_write(), so remove that too.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-04 14:02:08 -05:00
Linus Torvalds
36bbbd0e23 Merge branch 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull RCU fix from Paul McKenney:
 "This is a fix for a regression in the v5.10 merge window, but it was
  reported quite late in the v5.10 process, plus generating and testing
  the fix took some time.

  The regression is due to commit 36dadef23f ("kprobes: Init kprobes
  in early_initcall") which on powerpc can use RCU Tasks before
  initialization, resulting in boot failures.

  The fix is straightforward, simply moving initialization of RCU Tasks
  before the early_initcall()s. The fix has been exposed to -next and
  kbuild test robot testing, and has been tested by the PowerPC guys"

* 'rcu/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
  rcu-tasks: Move RCU-tasks initialization to before early_initcall()
2021-01-04 10:55:19 -08:00
Linus Torvalds
f4f6a2e329 An addition to compiler_attributes.h thanks to:
- Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPjU5OPd5QIZ9jqqOGXyLc2htIW0FAl/zKY4ACgkQGXyLc2ht
 IW29GhAAzRa+f777i2VH+QR4qQmDY2WgNDb978h1AFa7r30b6ozFm31o/Ks4yL/v
 yGuXd0O4NeKn+rWJ6TeDrZUOvRAHOV9osXzwPVW/yRWlZxJ+YmnpPVkNys0ALaHg
 aBSOqcBVtIze8GVRpktQdYX75uqNWZeP9sea1srbAGG23lMCtJHHwSJfz4iDoC1z
 pE34f5FxE+Zf+EQw2RhQ1Tias/AgxlKou9Ua1SnXxQr2pGkjXHK/Lw4/cGxHtn2R
 K9ngpypJDOtDb6Y0/6iIa28J9kseQPWbCRu2gdi9/of3EUKTDfMSLemor/g9TcCt
 hpcM1OYX12IG8ygoUOIRMwgX5v46WttCi5+ECTGmaSZhYhzk5tRsz7kBiQds9Rnq
 P8ymNKvkS6YgOpLJJTb9BIOVlIzTH9jY66khoLykXiMIj0i8k3Kxr3bQgTOM0KaT
 BmdxLhqJXImb+vqFscoHDXyJG+SbDnKUgyHRJ5NyGozFxgmub/KOylY2UusP3mcM
 invghrX0aZW+8mLMgpw+gxofT3TSgxj7veKUXklTUevv6DK7dk3RvqwIkvzcjLIw
 SPTWerTJfAR850mrK94587JNrdkBrq876IykNEattgTCkfUpJbrulUZdA4niIj6L
 XfYzZ6OGfvI/YX3VbH88cxQRmRKAX2mhKzWQzhTrTr6GdCfj1rk=
 =KEnt
 -----END PGP SIGNATURE-----

Merge tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux

Pull ENABLE_MUST_CHECK removal from Miguel Ojeda:
 "Remove CONFIG_ENABLE_MUST_CHECK (Masahiro Yamada)"

Note that this removes the config option by making the must-check
unconditional, not by removing must check itself.

* tag 'compiler-attributes-for-linus-v5.11' of git://github.com/ojeda/linux:
  Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK
2021-01-04 10:47:38 -08:00
Marc Zyngier
8cbebc4118 KVM: arm64: Replace KVM_ARM_PMU with HW_PERF_EVENTS
KVM_ARM_PMU only existed for the benefit of 32bit ARM hosts,
and makes no sense now that we are 64bit only. Get rid of it.

Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-01-04 16:50:16 +00:00
Jens Axboe
99668f6180 fs: expose LOOKUP_CACHED through openat2() RESOLVE_CACHED
Now that we support non-blocking path resolution internally, expose it
via openat2() in the struct open_how ->resolve flags. This allows
applications using openat2() to limit path resolution to the extent that
it is already cached.

If the lookup cannot be satisfied in a non-blocking manner, openat2(2)
will return -1/-EAGAIN.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-04 11:42:26 -05:00
Jens Axboe
6c6ec2b0a3 fs: add support for LOOKUP_CACHED
io_uring always punts opens to async context, since there's no control
over whether the lookup blocks or not. Add LOOKUP_CACHED to support
just doing the fast RCU based lookups, which we know will not block. If
we can do a cached path resolution of the filename, then we don't have
to always punt lookups for a worker.

During path resolution, we always do LOOKUP_RCU first. If that fails and
we terminate LOOKUP_RCU, then fail a LOOKUP_CACHED attempt as well.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2021-01-04 11:42:21 -05:00
Loic Poulain
b5a8d233a5 bus: mhi: core: Add device hardware reset support
The MHI specification allows to perform a hard reset of the device
when writing to the SOC_RESET register. It can be used to completely
restart the device (e.g. in case of unrecoverable MHI error).

This is up to the MHI controller driver to determine when this hard
reset should be used, and in case of MHI errors, should be used as
a reset of last resort (after standard MHI stack reset).

This function is a stateless function, the MHI layer do nothing except
triggering the reset by writing into the right register(s), this is up
to the caller to ensure right mhi_controller state (e.g. unregister the
controller if necessary).

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
2021-01-04 21:50:24 +05:30
Wesley Cheng
8280de6ab0 usb: gadget: composite: Split composite reset and disconnect
Add a specific composite reset API to differentiate between disconnect and
reset events.  This is needed for adjusting the current draw accordingly
based on the USB battery charging specification.  The device is only allowed
to draw the 500/900 mA (HS/SS) while in the CONFIGURED state, and only 100 mA
in the connected and UNCONFIGURED state.

Reviewed-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Wesley Cheng <wcheng@codeaurora.org>
Link: https://lore.kernel.org/r/1609283011-21997-3-git-send-email-wcheng@codeaurora.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-01-04 16:45:50 +01:00
David Howells
366911cd76 afs: Fix directory entry size calculation
The number of dirent records used by an AFS directory entry should be
calculated using the assumption that there is a 16-byte name field in the
first block, rather than a 20-byte name field (which is actually the case).
This miscalculation is historic and effectively standard, so we have to use
it.

The calculation we need to use is:

	1 + (((strlen(name) + 1) + 15) >> 5)

where we are adding one to the strlen() result to account for the NUL
termination.

Fix this by the following means:

 (1) Create an inline function to do the calculation for a given name
     length.

 (2) Use the function to calculate the number of records used for a dirent
     in afs_dir_iterate_block().

     Use this to move the over-end check out of the loop since it only
     needs to be done once.

     Further use this to only go through the loop for the 2nd+ records
     composing an entry.  The only test there now is for if the record is
     allocated - and we already checked the first block at the top of the
     outer loop.

 (3) Add a max name length check in afs_dir_iterate_block().

 (4) Make afs_edit_dir_add() and afs_edit_dir_remove() use the function
     from (1) to calculate the number of blocks rather than doing it
     incorrectly themselves.

Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Fixes: ^1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
2021-01-04 12:25:19 +00:00
Hans Verkuil
28955a6156 media: v4l2-dev/event: add v4l2_event_wake_all()
When unregistering a V4L2 device node, make sure any filehandles
that are waiting for an event are woken up.

Add v4l2_event_wake_all() to v4l2-event.c and call it from
video_unregister_device().

Otherwise userspace might never know that a device node was removed.

[hverkuil: checkpatch: replaced 'if (vdev == NULL)' by 'if (!vdev)']

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04 13:14:25 +01:00
Sowjanya Komatineni
8f81888bec media: v4l2-fwnode: Update V4L2_FWNODE_CSI2_MAX_DATA_LANES to 8
Some CSI2 receivers support 8 data lanes.

So, this patch updates CSI2 maximum data lanes to be 8.

Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-01-04 13:02:18 +01:00
Philipp Zabel
9dbb70fd66 drm/crtc: add drmm_crtc_alloc_with_planes()
Add an alternative to drm_crtc_init_with_planes() that allocates
and initializes a crtc and registers drm_crtc_cleanup() with
drmm_add_action_or_reset().

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04 12:59:33 +01:00
Philipp Zabel
0a1b813f06 drm/plane: add drmm_universal_plane_alloc()
Add an alternative to drm_universal_plane_init() that allocates
and initializes a plane and registers drm_plane_cleanup() with
drmm_add_action_or_reset().

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04 12:59:33 +01:00
Philipp Zabel
59abba48c4 drm/simple_kms_helper: add drmm_simple_encoder_alloc()
Add an alternative to drm_simple_encoder_init() that allocates and
initializes a simple encoder and registers drm_encoder_cleanup() with
drmm_add_action_or_reset().

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04 12:59:33 +01:00
Philipp Zabel
ca5092d04d drm: add drmm_encoder_alloc()
Add an alternative to drm_encoder_init() that allocates and initializes
an encoder and registers drm_encoder_cleanup() with
drmm_add_action_or_reset().

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04 12:59:33 +01:00
Philipp Zabel
f35a2a9910 drm/encoder: make encoder control functions optional
Simple managed encoders do not require the .destroy callback,
make the whole funcs structure optional.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2021-01-04 12:59:33 +01:00
Martin Blumenstingl
b8dd6a8ae5 dt-bindings: clock: meson8b: remove non-existing clock macros
CLKID_UNUSED and CLKID_XTAL aren't valid clocks. Remove them since
there are no consumers of this anymore.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201221183624.932649-3-martin.blumenstingl@googlemail.com
2021-01-04 11:43:19 +01:00
Eric Biggers
28dcca4cc0 crypto: blake2b - sync with blake2s implementation
Sync the BLAKE2b code with the BLAKE2s code as much as possible:

- Move a lot of code into new headers <crypto/blake2b.h> and
  <crypto/internal/blake2b.h>, and adjust it to be like the
  corresponding BLAKE2s code, i.e. like <crypto/blake2s.h> and
  <crypto/internal/blake2s.h>.

- Rename constants, e.g. BLAKE2B_*_DIGEST_SIZE => BLAKE2B_*_HASH_SIZE.

- Use a macro BLAKE2B_ALG() to define the shash_alg structs.

- Export blake2b_compress_generic() for use as a fallback.

This makes it much easier to add optimized implementations of BLAKE2b,
as optimized implementations can use the helper functions
crypto_blake2b_{setkey,init,update,final}() and
blake2b_compress_generic().  The ARM implementation will use these.

But this change is also helpful because it eliminates unnecessary
differences between the BLAKE2b and BLAKE2s code, so that the same
improvements can easily be made to both.  (The two algorithms are
basically identical, except for the word size and constants.)  It also
makes it straightforward to add a library API for BLAKE2b in the future
if/when it's needed.

This change does make the BLAKE2b code slightly more complicated than it
needs to be, as it doesn't actually provide a library API yet.  For
example, __blake2b_update() doesn't really need to exist yet; it could
just be inlined into crypto_blake2b_update().  But I believe this is
outweighed by the benefits of keeping the code in sync.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:39 +11:00
Eric Biggers
bbda6e0f13 crypto: blake2s - include <linux/bug.h> instead of <asm/bug.h>
Address the following checkpatch warning:

	WARNING: Use #include <linux/bug.h> instead of <asm/bug.h>

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:39 +11:00
Eric Biggers
8786841bc2 crypto: blake2s - adjust include guard naming
Use the full path in the include guards for the BLAKE2s headers to avoid
ambiguity and to match the convention for most files in include/crypto/.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:38 +11:00
Eric Biggers
7d87131fad crypto: blake2s - add comment for blake2s_state fields
The first three fields of 'struct blake2s_state' are used in assembly
code, which isn't immediately obvious, so add a comment to this effect.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:38 +11:00
Eric Biggers
42ad8cf821 crypto: blake2s - optimize blake2s initialization
If no key was provided, then don't waste time initializing the block
buffer, as its initial contents won't be used.

Also, make crypto_blake2s_init() and blake2s() call a single internal
function __blake2s_init() which treats the key as optional, rather than
conditionally calling blake2s_init() or blake2s_init_key().  This
reduces the compiled code size, as previously both blake2s_init() and
blake2s_init_key() were being inlined into these two callers, except
when the key size passed to blake2s() was a compile-time constant.

These optimizations aren't that significant for BLAKE2s.  However, the
equivalent optimizations will be more significant for BLAKE2b, as
everything is twice as big in BLAKE2b.  And it's good to keep things
consistent rather than making optimizations for BLAKE2b but not BLAKE2s.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:38 +11:00
Eric Biggers
8c4a93a127 crypto: blake2s - share the "shash" API boilerplate code
Add helper functions for shash implementations of BLAKE2s to
include/crypto/internal/blake2s.h, taking advantage of
__blake2s_update() and __blake2s_final() that were added by the previous
patch to share more code between the library and shash implementations.

crypto_blake2s_setkey() and crypto_blake2s_init() are usable as
shash_alg::setkey and shash_alg::init directly, while
crypto_blake2s_update() and crypto_blake2s_final() take an extra
'blake2s_compress_t' function pointer parameter.  This allows the
implementation of the compression function to be overridden, which is
the only part that optimized implementations really care about.

The new functions are inline functions (similar to those in sha1_base.h,
sha256_base.h, and sm3_base.h) because this avoids needing to add a new
module blake2s_helpers.ko, they aren't *too* long, and this avoids
indirect calls which are expensive these days.  Note that they can't go
in blake2s_generic.ko, as that would require selecting CRYPTO_BLAKE2S
from CRYPTO_BLAKE2S_X86, which would cause a recursive dependency.

Finally, use these new helper functions in the x86 implementation of
BLAKE2s.  (This part should be a separate patch, but unfortunately the
x86 implementation used the exact same function names like
"crypto_blake2s_update()", so it had to be updated at the same time.)

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:38 +11:00
Eric Biggers
057edc9c8b crypto: blake2s - move update and final logic to internal/blake2s.h
Move most of blake2s_update() and blake2s_final() into new inline
functions __blake2s_update() and __blake2s_final() in
include/crypto/internal/blake2s.h so that this logic can be shared by
the shash helper functions.  This will avoid duplicating this logic
between the library and shash implementations.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-01-03 08:41:38 +11:00