Commit graph

691,473 commits

Author SHA1 Message Date
Ben Dooks
fb6e76cd23 ARM: SAMSUNG: Do not allow get/set/round rate calls with no divider
If the reg_div field is not set, then do not register clk_ops with the
get/set/round rate calls as these will fail to work.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:11 +09:00
Ben Dooks
2c2f69b15d ARM: SAMSUNG: Move clock.c to arch/arm/plat-samsung
This is the core implementation of the clock code for all Samsung based
SoCs, so move it to arch/arm/plat-samsung (the clock.h file has already
been moved).

Since the file is built for every Samsung SoC, no changes are needed to the
Kconfig system.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:11 +09:00
Ben Dooks
682e2b7d45 ARM: S3C64XX: Avoid announcing clksrc clocks twice
The new code calls the clock setup code on registration which
can be before the clock system has been fully initialised. The
following code re-does this setup at the end of the clock
registration and thus we get two printings.

Update the calls to only print on the last pass or when doing
the necessary resume work.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:10 +09:00
Ben Dooks
f3e0b724cc ARM: S3C64XX: Fixup .reg_src and .reg_div with named initialisers
Change these two fields to have named initialisers as per the
review comments from Kyungmin Park.

sed used:

s@\.reg_src\(.*\)=\(.*\){\(.*\),\(.*\),\(.*\)}@.reg_src\1=\2{ .reg =\3, .shift =\4, .size =\5 }@g
s@\.reg_div\(.*\)=\(.*\){\(.*\),\(.*\),\(.*\)}@.reg_div\1=\2{ .reg =\3, .shift =\4, .size =\5 }@g

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:10 +09:00
Ben Dooks
b3bf41be06 ARM: SAMSUNG: Reduce size of struct clk.
Reduce the size of struct clk by 12 bytes and make defining clocks with
common implementation functions easier by moving the set_rate, get_rate,
round_rate and set_parent calls into a new structure called 'struct clk_ops'
and using that instead.

This change does make a few clocks larger as they need their own clk_ops,
but this is outweighed by the number of clocks with either no ops or having
a common set of ops.

Update all the users of this.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:10 +09:00
Harald Welte
13bbd88504 ARM: S3C64XX: Remove unused clock definitions from clock header
Clean out the definitions we are no longer using after the new clock
code updates.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
[ben-linux@fluff.org: split from initial patch provided]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:09 +09:00
Ben Dooks
399cae7474 ARM: S3C64XX: Use new clock-clksrc.c code for clocks.
Move the s3c6400-clock.c implementation over to use the new common
plat-samsung based clock-clksrc.c.

Note, this does not delete the clocks definitions that are now unused
in the regs-clock.h to reduce the quantity of change in this commit.

Based on original patches by Harald Welte.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:09 +09:00
Harald Welte
aa9ad6ad9c ARM: SAMSUNG: Add core clock implementation for clksrc based clocks
Add a core for the clksrc clock implementation, which is found in many of
the newer Samsung SoCs into plat-samsung.

Signed-off-by: Harald Welte <laforge@gnumonks.org>
[ben-linux@fluff.org: split from original patch to make change smaller]
[ben-linux@fluff.org: split clk and clksrc changes]
[ben-linux@fluff.org: moved to plat-samsung from plat-s3c]
[ben-linux@fluff.org: re-wrote headers after splits]
[ben-linux@fluff.org: added better documentation to headers]
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:09 +09:00
Ben Dooks
8360493c4a ARM: S3C64XX: Compress s3c6400-clock.c code
The individually named clocks are all static to the code
and thus can be compressed into a single array and then
the array can be referenced. This removes the need for
a seperate array of pointers to clocks.

Fix a minor problem of re-initialising the pointers in
s3c6400_set_clksrc() as this is also called by the cpufreq
code. Move these initialisations to the code that does the
registration.

Based on Harald Welte's original clock changes patch.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:08 +09:00
Ben Dooks
f9c4f1e4dd ARM: S3C64XX: Cleanup common init code in s3c6400-clock.c
Remove the four fields from clksrc_clk.clk which are always the same
and init them when the clock is registered. This helps remove the amount
of repeated code.

This is a re-work of Harald Welte's clock changes for the latest kernel.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:08 +09:00
Ben Dooks
70792bcfad ARM: SAMSUNG: Move <plat/clock.h> to plat-samsung
Move the <plat/clock.h> header to plat-samsung where it can be used by all
the platforms, and readies it for the next round of clock updates where
the clock code will be amalgamated.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:10:08 +09:00
Ben Dooks
3ce2f76f5d ARM: MINI2440: Fixup __initdata usage
Remove some of the __initdata tags which are currently inappropriate for
platform_device and some of the platform data. These can be returned once
support for copying platform devices and data is added.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 17:04:42 +09:00
Uri Yosef
0a3727ffb9 ARM: MINI2440: Fix crash on boot due to improper __initdata qualifier
This patch fix mini2440 crash on boot due to improper __initdata
qualifier on mini2440_led1_pdata.

Signed-off-by: Uri Yosef <uri.yosef@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 16:56:05 +09:00
Paul Mundt
6f832e8aab sh: mach-sdk7786: mode pins support.
This wires up the mode pins support on the SDK7786. The pins are
standard SH7786 pins, and all are fixed in software. Needed for the
clock framework, PCIe, and so forth.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 16:31:04 +09:00
Aneesh Kumar K.V
1296cc85c2 ext4: Drop EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE flag
We should update reserve space if it is delalloc buffer
and that is indicated by EXT4_GET_BLOCKS_DELALLOC_RESERVE flag.
So use EXT4_GET_BLOCKS_DELALLOC_RESERVE in place of
EXT4_GET_BLOCKS_UPDATE_RESERVE_SPACE

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-01-15 01:27:59 -05:00
Aneesh Kumar K.V
5f634d064c ext4: Fix quota accounting error with fallocate
When we fallocate a region of the file which we had recently written,
and which is still in the page cache marked as delayed allocated blocks
we need to make sure we don't do the quota update on writepage path.
This is because the needed quota updated would have already be done
by fallocate.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-01-25 04:00:31 -05:00
Aneesh Kumar K.V
1db913823c ext4: Handle -EDQUOT error on write
We need to release the journal before we do a write_inode.  Otherwise
we could deadlock.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2010-01-22 17:06:20 -05:00
Paul Mundt
f0cb77372c sh: Fix up the secondary CPU entry point for 32bit mode.
Presently the secondary CPU entry point is only aimed at 29bit phys mode,
causing it to point to a stray virtual address in 32bit mode. Fix it up
after consulting with our shiny new __in_29bit_mode().

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 15:13:48 +09:00
Dave Airlie
8471a26b9c Merge remote branch 'korg/drm-radeon-testing' into drm-linus
* korg/drm-radeon-testing:
  drm/radeon/kms: Use radeon_agp_disable when disabling AGP
  drm/radeon/kms: Disable AGP is aperture size < 32M
  drm/radeon/kms: Fix r600 blit cleanup path
  drm/radeon/kms: Do not unpin buffer in fb destruction
  drm/radeon/kms: fix displayport->dvi connector DDC.
2010-01-15 15:40:39 +10:00
Paul Mundt
a6198a238b sh: Guard against early IPIs in flush_cache_all().
flush_cache_all() gets called in to when we do some early ioremapping.
Unfortunately on SDK7786 the interrupt controller itself requires
ioremapping, leading to a bit of a chicken and egg scenario. For now,
don't bother with IPI crosscalls if there aren't any other CPUs online.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 14:21:37 +09:00
Li Zefan
d1303dd1d6 tracing/filters: Add comment for match callbacks
We should be clear on 2 things:

- the length parameter of a match callback includes
  tailing '\0'.

- the string to be searched might not be NULL-terminated.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8770.7000608@cn.fujitsu.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:14 -05:00
Li Zefan
16da27a8bc tracing/filters: Fix MATCH_FULL filter matching for PTR_STRING
MATCH_FULL matching for PTR_STRING is not working correctly:

  # echo 'func == vt' > events/bkl/lock_kernel/filter
  # echo 1 > events/bkl/lock_kernel/enable
  ...
  # cat trace
   Xorg-1484  [000]  1973.392586: lock_kernel: ... func=vt_ioctl()
    gpm-1402  [001]  1974.027740: lock_kernel: ... func=vt_ioctl()

We should pass to regex.match(..., len) the length (including '\0')
of the source string instead of the length of the pattern string.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8763.5070707@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:12 -05:00
Li Zefan
b2af211f28 tracing/filters: Fix MATCH_MIDDLE_ONLY filter matching
The @str might not be NULL-terminated if it's of type
DYN_STRING or STATIC_STRING, so we should use strnstr()
instead of strstr().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8753.2000102@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:11 -05:00
Li Zefan
d5f1fb5335 lib: Introduce strnstr()
It differs strstr() in that it limits the length to be searched
in the first string.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8743.6030805@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:09 -05:00
Li Zefan
a3291c14ec tracing/filters: Fix MATCH_END_ONLY filter matching
For '*foo' pattern, we should allow any string ending with
'foo', but event filtering incorrectly disallows strings
like bar_foo_foo:

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8735.6070604@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:07 -05:00
Li Zefan
285caad415 tracing/filters: Fix MATCH_FRONT_ONLY filter matching
MATCH_FRONT_ONLY actually is a full matching:

  # ./perf record -R -f -a -e lock:lock_acquire \
	--filter 'name ~rcu_*' sleep 1
  # ./perf trace
  (no output)

We should pass the length of the pattern string to strncmp().

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E8721.5090301@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:05 -05:00
Li Zefan
751e9983ee ftrace: Fix MATCH_END_ONLY function filter
For '*foo' pattern, we should allow any string ending with
'foo', but ftrace filter incorrectly disallows strings
like bar_foo_foo:

  # echo '*io' > set_ftrace_filter
  # cat set_ftrace_filter | grep 'req_bio_endio'
  # cat available_filter_functions | grep 'req_bio_endio'
  req_bio_endio

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
LKML-Reference: <4B4E870E.6060607@cn.fujitsu.com>
Acked-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2010-01-14 22:38:03 -05:00
Jerome Glisse
79b7dcb2af drm: EDID accept separate sync video mode
X is accepting such video mode, do the same. Pointed out by Joshua Roys
on IRC. Fix https://bugzilla.redhat.com/show_bug.cgi?id=540024

[fix printf to use composite not integrated :- airlied]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-15 13:29:52 +10:00
Dave Airlie
1c974dc218 Merge remote branch 'nouveau/for-airlied' of ../drm-nouveau-next into drm-linus
* 'nouveau/for-airlied' of ../drm-nouveau-next: (44 commits)
  drm/nouveau: check pushbuffer bounds in ioctl
  drm/nouveau: reserve VGA area for the moment
  drm/nouveau: Unset the EDID connector property when the EDID block goes away.
  drm/nouveau: Fallback to analog load detection when the EDID block is invalid.
  drm/nouveau: fix edid memleak in nouveau_connector
  drm/nouveau: Break some long lines.
  drm/nouveau: add NV18 device id to call_lvds_manufacturer_script
  drm/nv50: Fix typo in PGRAPH initialisation.
  drm/nouveau: less magic DCB 1.5 parsing
  drm/nouveau: assume no nv04 board has a DCB table
  drm/nouveau: remove PRIV0 check in nouveau_mem_close()
  drm/nouveau: wait on fence after bo move if validating for another channel
  drm/nouveau: trust init table registers are safe
  drm/nv50: wait for pgraph to idle before unloading the context
2010-01-15 13:25:38 +10:00
Paul Mundt
a09d2831b3 sh: heartbeat: Update boards for access size hinting.
This updates the existing boards that specify the register width through
platform data to use the resource flags instead. This eliminates platform
data completely in most cases, and permits further improvement in the
heartbeat driver as well as shrinking the overall private data size.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 12:24:34 +09:00
Paul Mundt
2267c7875b sh: mach-sdk7786: heartbeat support.
Hand off the user LEDs to the heartbeat driver.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 12:11:30 +09:00
Paul Mundt
10ab92d8c3 sh: heartbeat: Support access size specification via resource flags.
This permits the resource access size to be handed off through the
resource flags, which saves platforms from having to establish
platform data only to specify the register width.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-01-15 12:08:31 +09:00
Benjamin Herrenschmidt
78924577f4 Merge commit 'gcl/merge' into merge 2010-01-15 13:40:17 +11:00
Benjamin Herrenschmidt
291f8de2c6 Merge commit 'kumar/merge' into merge 2010-01-15 13:40:03 +11:00
Nathan Fontenot
d0174c7219 powerpc: Move cpu hotplug driver lock from pseries to powerpc
Move the defintion and lock helper routines for the cpu hotplug driver
lock from pseries to powerpc code to avoid build breaks for platforms
other than pseries that use cpu hotplug.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Acked-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:18 +11:00
Nathan Fontenot
9becd2a0d6 powerpc: Move /proc/ppc64 to /proc/powerpc update
It looks like the previous patch sent out to move RTAS and
other items from /proc/ppc64 to /proc/powerpc missed a few
files needed for RAS and DLPAR functionality.

Original Patch here:
http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-September/076096.html

This patch updates the remaining files to be created under /proc/powerpc.

Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:17 +11:00
Joakim Tjernlund
061ec9599f powerpc/8xx: Fix user space TLB walk in dcbX fixup
The newly added fixup for buggy dcbX insn's has
a bug that always trigger a kernel TLB walk so a user space
dcbX insn will cause a Kernel Machine Check if it hits DTLB error.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:16 +11:00
Stefan Roese
3e7b484354 powerpc: Fix decrementer setup on 1GHz boards
We noticed that recent kernels didn't boot on our 1GHz Canyonlands 460EX
boards anymore. As it seems, patch 8d165db1 [powerpc: Improve
decrementer accuracy] introduced this problem. The routine div_sc()
overflows with shift = 32 resulting in this incorrect setup:

time_init: decrementer frequency = 1000.000012 MHz
time_init: processor frequency   = 1000.000012 MHz
clocksource: timebase mult[400000] shift[22] registered
clockevent: decrementer mult[33] shift[32] cpu[0]

This patch now introduces a local div_dc64() version of this function
so that this overflow doesn't happen anymore.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Detlev Zundel <dzu@denx.de>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:15 +11:00
Michael Ellerman
b0ff153cd6 powerpc/iseries: Initialise on-stack completion
get_viotape_info() declares a vio_waitevent on the stack, which
contains a completion, but never initialises the completion.

I have no idea how this ever worked, and on recent kernels it causes
an oops in handle_tape_event() when we access the non-initialised
completion.

Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:14 +11:00
Kamalesh Babulal
aa8b83cb0b powerpc/hvc: Driver build breaks with !HVC_CONSOLE
Hi Stephen,

	next-20090925 randconfig build breaks on hvcs driver on powerpc,
with HVC_CONSOLE=n.

ERROR: ".hvc_put_chars" [drivers/char/hvcs.ko] undefined!
ERROR: ".hvc_get_chars" [drivers/char/hvcs.ko] undefined!

adding the dependency of HVC_CONSOLE helped

Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:13 +11:00
Benjamin Herrenschmidt
02ab851324 serial/pmac_zilog: Workaround problem due to interrupt on closed port
It seems that in qemu, we can see an interrupt in R3 despite the
fact that it's masked in W1. The chip doesn't actually issue an
interrupt, but we can "see" it when taking an interrupt for the
other channel. This may be a qemu bug ... or not, so let's be
safe and avoid calling into the UART layer when that happens which
woulc cause a crash.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Rob Landley <rob@landley.net>
2010-01-15 13:26:13 +11:00
Márton Németh
46759a7c13 powerpc/macintosh: Make Open Firmware device id constant
The match_table field of the struct of_device_id is constant in <linux/of_platform.h>
so it is worth to make the initialization data also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:26:04 +11:00
Jiri Slaby
4bf936b9e4 powerpc: Use helpers for rlimits
Make sure compiler won't do weird things with limits. E.g. fetching
them twice may return 2 different values after writable limits are
implemented.

I.e. either use rlimit helpers added in
3e10e716ab
or ACCESS_ONCE if not applicable.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: linuxppc-dev@ozlabs.org
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:08 +11:00
Anton Blanchard
c81b812a33 powerpc: cpumask_of_node() should handle -1 as a node
pcibus_to_node can return -1 if we cannot determine which node a pci bus
is on. If passed -1, cpumask_of_node will negatively index the lookup array
and pull in random data:

# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
00000000,00000003,00000000,00000000
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
64-65

Change cpumask_of_node to check for -1 and return cpu_all_mask in this
case:

# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpus
ffffffff,ffffffff,ffffffff,ffffffff
# cat /sys/devices/pci0000:00/0000:00:01.0/local_cpulist
0-127

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:08 +11:00
FUJITA Tomonori
46150a050f powerpc/pseries: Fix dlpar compile warning without CONFIG_PROC_DEVICETREE
cc1: warnings being treated as errors
arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_attach_node':
arch/powerpc/platforms/pseries/dlpar.c:239: error: unused variable 'ent'
arch/powerpc/platforms/pseries/dlpar.c: In function 'dlpar_detach_node':
arch/powerpc/platforms/pseries/dlpar.c:271: error: unused variable 'prop'
arch/powerpc/platforms/pseries/dlpar.c:270: error: unused variable 'parent'
make[3]: *** [arch/powerpc/platforms/pseries/dlpar.o] Error 1

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Anton Blanchard
92cb3694dd powerpc/pseries: Fix xics interrupt affinity
Commit 57b150cce8 (irq: only update affinity if
->set_affinity() is sucessfull) broke xics irq affinity.

We need to use the cpumask passed in, instead of accessing ->affinity directly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Anton Vorontsov
e443ed3560 powerpc/swsusp_32: Fix TLB invalidation
It seems there is a thinko in the TLB invalidation code that makes the
tlbie in the loop executed just once. The intended check was probably
'gt', not 'lt'.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Joakim Tjernlund
9f4f04ba2b powerpc/8xx: Always pin kernel instruction TLB
Various kernel asm modifies SRR0/SRR1 just before executing
a rfi. If such code crosses a page boundary you risk a TLB miss
which will clobber SRR0/SRR1. Avoid this by always pinning
kernel instruction TLB space.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-01-15 13:20:07 +11:00
Mark Brown
d3cf4489d5 ARM: SMDK6410: Specify no GPIO for B_PWR_5V regulator
Since the fixed voltage regulator grew support for GPIO based
enables and GPIO 0 is valid on some systems we need to specify
that there is no valid GPIO enable control.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-01-15 09:52:51 +09:00
Luca Barbieri
12f735b79f drm/nouveau: check pushbuffer bounds in ioctl
Currently there is no check that the pushbuffer request bounds are inside
the TTM BO.

This allows to instruct the kernel to do relocations on user-selected
addresses, since the relocation bounds checking relies on the request
bounds.

This can oops the kernel accidentally and is easily exploitable.

This patch adds bound checking and alignment checking for ->offset and
->nr_dwords.

It also makes some variables unsigned, which should have no effect,
but prevents possible bounds checking problems.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-01-15 09:56:50 +10:00