Qgroup function may overwrite the saved error 'err' with 0
in case quota is not enabled, and this ends up with a
endless loop in balance because we keep going back to balance
the same block group.
It really should use 'ret' instead.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Reviewed-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Suppose you have the following tree in snap1 on a file system mounted with -o
inode_cache so that inode numbers are recycled
└── [ 258] a
└── [ 257] b
and then you remove b, rename a to c, and then re-create b in c so you have the
following tree
└── [ 258] c
└── [ 257] b
and then you try to do an incremental send you will hit
ASSERT(pending_move == 0);
in process_all_refs(). This is because we assume that any recycling of inodes
will not have a pending change in our path, which isn't the case. This is the
case for the DELETE side, since we want to remove the old file using the old
path, but on the create side we could have a pending move and need to do the
normal pending rename dance. So remove this ASSERT() and put a comment about
why we ignore pending_move. Thanks,
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
To build only the PDF of the media folder run::
make SPHINXDIRS=media pdfdocs
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This extends the method to build only sub-folders to the targets
"latexdocs" and "pdfdocs". To do so, a conf.py in the sub-folder is
required, where the latex_documents of the sub-folder are
defined. E.g. to build only gpu's PDF add the following to the
Documentation/gpu/conf.py::
+latex_documents = [
+ ("index", "gpu.tex", "Linux GPU Driver Developer's Guide",
+ "The kernel development community", "manual"),
+]
and run:
make SPHINXDIRS=gpu pdfdocs
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This allows use of the SDHI SD/SDIO controller present on R-Car Gen3 SoCs
and already enabled in the DT of the r8a7795/salvator-x (H3).
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
The setup() function of a Sphinx-extension can return a dictionary. This
is treated by Sphinx as metadata of the extension [1].
With metadata "parallel_read_safe = True" a extension is marked as
save for "parallel reading of source". This is needed if you want
build in parallel with N processes. E.g.:
make SPHINXOPTS=-j4 htmldocs
will no longer log warnings like:
WARNING: the foobar extension does not declare if it is safe for
parallel reading, assuming it isn't - please ask the extension author
to check and make it explicit.
Add metadata to extensions:
* kernel-doc
* flat-table
* kernel-include
[1] http://www.sphinx-doc.org/en/stable/extdev/#extension-metadata
Signed-off-by: Markus Heiser <markus.heiser@darmarIT.de>
Tested-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
* Some DQA improvements;
* Support for GMAC;
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jbNO
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2016-08-30-2' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
* Preparation for new HW continues;
* Some DQA improvements;
* Support for GMAC;
The XC instruction can be used to improve the speed of the raid6
recovery. The loops now operate on blocks of 256 bytes.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* Prevent a potential null dereference in iwlmvm
* Prevent an uninitialized value from being returned in iwlmvm
* Advertise support for channel width change in AP mode
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Oq0j
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-for-kalle-2016-08-29' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
* Fix P2P dump trigger
* Prevent a potential null dereference in iwlmvm
* Prevent an uninitialized value from being returned in iwlmvm
* Advertise support for channel width change in AP mode
When using a typedef function like this one:
typedef bool v4l2_check_dv_timings_fnc (const struct v4l2_dv_timings * t, void * handle);
The Sphinx C domain expects it to create a c:type: reference,
as that's the way it creates the type references when parsing
a c:function:: declaration.
So, a declaration like:
.. c:function:: bool v4l2_valid_dv_timings (const struct v4l2_dv_timings * t, const struct v4l2_dv_timings_cap * cap, v4l2_check_dv_timings_fnc fnc, void * fnc_handle)
Will create a cross reference for :c:type:`v4l2_check_dv_timings_fnc`.
So, when outputting such typedefs in RST format, we need to handle
this special case, as otherwise it will produce those warnings:
./include/media/v4l2-dv-timings.h:43: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc
./include/media/v4l2-dv-timings.h:60: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc
./include/media/v4l2-dv-timings.h:81: WARNING: c:type reference target not found: v4l2_check_dv_timings_fnc
So, change the kernel-doc script to produce a RST output for the
above typedef as:
.. c:type:: v4l2_check_dv_timings_fnc
**Typedef**: timings check callback
**Syntax**
``bool v4l2_check_dv_timings_fnc (const struct v4l2_dv_timings * t, void * handle);``
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Switch to using new gpio_desc interface and devm gpio get calls to
automatically manage gpio resource. Use gpiod_get_value which handles
active high / low calls.
If gpio_detect is set then force loading of the driver as it is
reasonable to assume that the battery may not be present.
Update the is_present flag immediately in the IRQ.
Remove legacy gpio specification from platform data.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
* pci/ptm:
PCI: Add PTM clock granularity information
PCI: Add pci_enable_ptm() for drivers to enable PTM on endpoints
PCI: Add Precision Time Measurement (PTM) support
The Haswell Power Control Unit has a non-PCI register (CONFIG_TDP_NOMINAL)
where BAR 0 is supposed to be. This is erratum HSE43 in the spec update
referenced below:
The PCIe* Base Specification indicates that Configuration Space Headers
have a base address register at offset 0x10. Due to this erratum, the
Power Control Unit's CONFIG_TDP_NOMINAL CSR (Bus 1; Device 30; Function
3; Offset 0x10) is located where a base register is expected.
Mark the PCU as having non-compliant BARs so we don't try to probe any of
them. There are no other BARs on this device.
Rename the quirk so it's not Broadwell-specific.
Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-spec-update.html
Link: http://www.intel.com/content/www/us/en/processors/xeon/xeon-e5-v3-datasheet-vol-2.html (section 5.4, Device 30 Function 3)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=153881
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Myron Stowe <myron.stowe@redhat.com>
The arm64 debug monitor initialisation code uses a CPU hotplug notifier
to clear the OS lock when CPUs come online.
This patch converts the code to the new hotplug mechanism.
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The arm64 hw_breakpoint implementation uses a CPU hotplug notifier to
reset the {break,watch}point registers when CPUs come online.
This patch converts the code to the new hotplug mechanism, whilst moving
the invocation earlier to remove the need to disable IRQs explicitly in
the driver (which could cause havok if we trip a watchpoint in an IRQ
handler whilst restoring the debug register state).
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Ignore the buildid of running kernel when both of --definition and
--vmlinux is given because that kernel should be off-line.
This also skips post-processing of kprobe event for relocating symbol
and checking blacklist, because it can not be done on off-line kernel.
E.g. without this fix perf shows an error as below
----
$ perf probe --vmlinux=./vmlinux-arm --definition do_sys_open
./vmlinux-arm with build id 7a1f76dd56e9c4da707cd3d6333f50748141434b not found, continuing without symbols
Failed to find symbol do_sys_open in kernel
Error: Failed to add events.
----
with this fix, we can get the definition
----
$ perf probe --vmlinux=./vmlinux-arm --definition do_sys_open
p:probe/do_sys_open do_sys_open+0
----
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/147214228193.23638.12581984840822162131.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add --definition/-D option for showing the trace-event definition in
stdout. This can be useful in debugging or combined with a shell script.
e.g.
----
# perf probe --definition 'do_sys_open $params'
p:probe/do_sys_open _text+2261728 dfd=%di:s32 filename=%si:u64 flags=%dx:s32 mode=%cx:u16
----
Suggested-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/147214226712.23638.2240534040014013658.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The symbols in the synthesized @plt entries where not demangled before,
i.e. we could end up with entries such as:
$ perf report
Samples: 7K of event 'cycles:ppp', Event count (approx.): 6223833141
Children Self Command Shared Object Symbol
- 93.63% 28.89% lab_mandelbrot lab_mandelbrot [.] main
- 73.81% main
- 33.57% hypot
27.76% __hypot_finite
15.97% __muldc3
2.90% __muldc3@plt
2.40% _ZNK6QImage6heightEv@plt
+ 2.14% QColor::rgb
1.94% _ZNK6QImage5widthEv@plt
1.92% cabs@plt
This patch remedies this issue by also applying demangling to the
synthesized symbols. The output for the above is now:
$ perf report
Samples: 7K of event 'cycles:ppp', Event count (approx.): 6223833141
Children Self Command Shared Object Symbol
- 93.63% 28.89% lab_mandelbrot lab_mandelbrot [.] main
- 73.81% main
- 33.57% hypot
27.76% __hypot_finite
15.97% __muldc3
2.90% __muldc3@plt
2.40% QImage::height() const@plt
+ 2.14% QColor::rgb
1.94% QImage::width() const@plt
1.92% cabs@plt
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
LPU-Reference: 20160830114102.30863-1-milian.wolff@kdab.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It is simpler to just do the loop, no need for globals and the last user
of such facility disappears.
Testing:
# perf probe -F [a-z]*recvmsg
aead_recvmsg
compat_SyS_recvmsg
compat_sys_recvmsg
hash_recvmsg
inet_recvmsg
kernel_recvmsg
netlink_recvmsg
packet_recvmsg
ping_recvmsg
raw_recvmsg
rawv6_recvmsg
rng_recvmsg
security_socket_recvmsg
selinux_socket_recvmsg
skcipher_recvmsg
sock_common_recvmsg
sock_no_recvmsg
sock_recvmsg
sys_recvmsg
tcp_recvmsg
udp_recvmsg
udpv6_recvmsg
unix_dgram_recvmsg
unix_seqpacket_recvmsg
unix_stream_recvmsg
#
Without filters:
# perf probe -F | tail -5
zswap_pool_create
zswap_pool_current
zswap_update_total_size
zswap_writeback_entry
zswap_zpool_param_set
#
# perf probe -F | wc -l
33311
#
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20160831130427.GA13095@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Use atomic type and operands for dev_priv->mm.bsd_engine_dispatch_index
to avoid one struct_mutex locking scenario.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Zhao Yakui <yakui.zhao@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1472731101-21982-1-git-send-email-joonas.lahtinen@linux.intel.com
Trivial fix to typos dev_dbg messages and comment.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add the power supply's current max property,
POWER_SUPPLY_PROP_CURRENT_MAX.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Add the power supply capacity level property, it corresponds to
POWER_SUPPLY_CAPACITY_LEVEL_*.
It also utilizes the precision voltage detector function module
to catch the low battery voltage.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Sebastian Reichel <sre@kernel.org>
FIMC-IS blocks must control 3 more clocks ("gicisp", "mcuctl_isp" and
"pwm_isp") to make the hardware fully operational.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Changing the rate of the DDR clock needs special care, as the DDR
is of course in use and will react badly if the rate changes under it.
Over time different approaches to handle that were used.
Past SoCs like the rk3288 and before would store some code in SRAM
while the rk3368 used a SCPI variant and let a coprocessor handle that.
New rockchip platforms like the rk3399 have a dcf controller to do ddr
frequency scaling, and support for this controller will be implemented
in the arm-trusted-firmware.
This new clock-type should over time handle all these methods for
handling DDR rate changes, but right now it will concentrate on the
SIP interface used to talk to ARM trusted firmware.
The SIP interface counterpart was merged from pull-request #684 [0]
into the upstream arm-trusted-firmware codebase.
[0] https://github.com/ARM-software/arm-trusted-firmware/pull/684
Signed-off-by: Lin Huang <hl@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Be defensive about what underlying fs provides us in the returned xattr
list buffer. If it's not properly null terminated, bail out with a warning
insead of BUG.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Now that overlayfs has xattr handlers for iop->{set,remove}xattr, use
those same handlers for iop->getxattr as well.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Setting POSIX acl may also modify the file mode, so need to copy that up to
the overlay inode.
Reported-by: Eryu Guan <eguan@redhat.com>
Fixes: d837a49bd5 ("ovl: fix POSIX ACL setting")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Commit d837a49bd5 ("ovl: fix POSIX ACL setting") switches from
iop->setxattr from ovl_setxattr to generic_setxattr, so switch from
ovl_removexattr to generic_removexattr as well. As far as permission
checking goes, the same rules should apply in either case.
While doing that, rename ovl_setxattr to ovl_xattr_set to indicate that
this is not an iop->setxattr implementation and remove the unused inode
argument.
Move ovl_other_xattr_set above ovl_own_xattr_set so that they match the
order of handlers in ovl_xattr_handlers.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fixes: d837a49bd5 ("ovl: fix POSIX ACL setting")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Use an ordinary #ifdef to conditionally include the POSIX ACL handlers
in ovl_xattr_handlers, like the other filesystems do. Flag the code
that is now only used conditionally with __maybe_unused.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Trivial fix to spelling mistake in pr_err message.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Some operations (setxattr/chmod) can make the cached acl stale. We either
need to clear overlay's acl cache for the affected inode or prevent acl
caching on the overlay altogether. Preventing caching has the following
advantages:
- no double caching, less memory used
- overlay cache doesn't go stale when fs clears it's own cache
Possible disadvantage is performance loss. If that becomes a problem
get_acl() can be optimized for overlayfs.
This patch disables caching by pre setting i_*acl to a value that
- has bit 0 set, so is_uncached_acl() will return true
- is not equal to ACL_NOT_CACHED, so get_acl() will not overwrite it
The constant -3 was chosen for this purpose.
Fixes: 39a25b2b37 ("ovl: define ->get_acl() for overlay inodes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Instead of calling ->get_acl() directly, use get_acl() to get the cached
value.
We will have the acl cached on the underlying inode anyway, because we do
permission checking on the both the overlay and the underlying fs.
So, since we already have double caching, this improves performance without
any cost.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When mounting overlayfs it needs a clean "work" directory under the
supplied workdir.
Previously the mount code removed this directory if it already existed and
created a new one. If the removal failed (e.g. directory was not empty)
then it fell back to a read-only mount not using the workdir.
While this has never been reported, it is possible to get a non-empty
"work" dir from a previous mount of overlayfs in case of crash in the
middle of an operation using the work directory.
In this case the left over state should be discarded and the overlay
filesystem will be consistent, guaranteed by the atomicity of operations on
moving to/from the workdir to the upper layer.
This patch implements cleaning out any files left in workdir. It is
implemented using real recursion for simplicity, but the depth is limited
to 2, because the worst case is that of a directory containing whiteouts
under "work".
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Clear out posix acl xattrs on workdir and also reset the mode after
creation so that an inherited sgid bit is cleared.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Cc: <stable@vger.kernel.org>
Setting MS_POSIXACL in sb->s_flags has the side effect of passing mode to
create functions without masking against umask.
Another problem when creating over a whiteout is that the default posix acl
is not inherited from the parent dir (because the real parent dir at the
time of creation is the work directory).
Fix these problems by:
a) If upper fs does not have MS_POSIXACL, then mask mode with umask.
b) If creating over a whiteout, call posix_acl_create() to get the
inherited acls. After creation (but before moving to the final
destination) set these acls on the created file. posix_acl_create() also
updates the file creation mode as appropriate.
Fixes: 39a25b2b37 ("ovl: define ->get_acl() for overlay inodes")
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
