The compatible DDR controllers may support DDR, DDR2, DDR3, DDR4 DRAM.
An individual controller doesn't support all of them. The EDAC driver
reads SDRAM_CFG to determine which mode is configured.
Add DDR4 and drop the defines used only in the mtype assignment.
Signed-off-by: York Sun <york.sun@nxp.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: morbidrsa@gmail.com
Cc: oss@buserror.net
Cc: stuart.yoder@nxp.com
Link: http://lkml.kernel.org/r/1470779760-16483-6-git-send-email-york.sun@nxp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The mpc85xx-compatible DDR controllers are used on ARM-based SoCs too.
Carve out the DDR part from the mpc85xx EDAC driver in preparation to
support both architectures.
Signed-off-by: York Sun <york.sun@nxp.com>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: oss@buserror.net
Cc: stuart.yoder@nxp.com
Link: http://lkml.kernel.org/r/1470946525-3410-1-git-send-email-york.sun@nxp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
On e500v1, read fault exception enable (RFXE) controls whether assertion
of core_fault_in causes a machine check interrupt. Assertion of
core_fault_in can result from uncorrectable data error, such as an L2
multi-bit ECC error. It can also occur from a system error if logic on
the integrated device signals a fault for nonfatal errors. RFXE bit is
cleared out of reset, and should be left clear for normal operation.
Assertion of core_fault_in does not cause a machine check.
RFXE is set specifically for RIO (Rapid IO) and PCI for book E to catch
the errors by machine check. With this bit set, the EDAC driver can't
get the interrupt in case of uncorrectable error. So this bit is cleared
in favor of EDAC. However, the benefit of catching such uncorrectable
error doesn't outweigh the other errors which may hang the system.
Besides, e500v2 has different errors masked by RFXE, and e500mc doesn't
support this bit. It is more reasonable to leave RFXE as is in the EDAC
driver, and leave the uncorrectable errors triggering machine check for
e500v1.
Suggested-by: Scott Wood <oss@buserror.net>
Signed-off-by: York Sun <york.sun@nxp.com>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: oss@buserror.net
Cc: stuart.yoder@nxp.com
Link: http://lkml.kernel.org/r/1470779760-16483-2-git-send-email-york.sun@nxp.com
Signed-off-by: Borislav Petkov <bp@suse.de>
The L2 and OCRAM devices have different ecc trigger names than the other
EDAC devices (FIFO peripherals). Make them all the same and remove the
character array from the device structure.
Signed-off-by: Thor Thayer <tthayer@opensource.altera.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Link: http://lkml.kernel.org/r/1471622666-15197-2-git-send-email-tthayer@opensource.altera.com
Signed-off-by: Borislav Petkov <bp@suse.de>
Intel Merrifield platform provides SD card interface. The interface allows user
to plug SD card to extend storage capacity.
Append the essential data to enable SD card detection on it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160831135713.79066-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Intel Edison board provides built-in WiFi dongle based on Broadcom BCM43340.
Append the essential data to enable WiFi on Intel Edison.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20160831135713.79066-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Robert Foss says:
====================
net/usb: asix driver improvements
This is a resubmission of v3, since the netdev
mailinlist was not sent the previous submission.
This series improves power management of the asix driver.
- Suspend/resume support is improved to save needed registers.
- Device disconnection is improved.
- Fixes AX88772x resume failures
- Implementes IEEE 802.3 spec section "22.2.4.1.1 Reset" correctly
- Fixes AX_CMD_WRITE_MEDIUM_MODE being set incorrectly
Changes since v1:
- Added proper metadata tags to series.
- Added two more patches to series.
Changes since v2:
- Added coverletter
- Tested patches on AX88772A/AX88772B/AX88178/AX88179 hardware
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Grant Grundler <grundler@chromium.org>
The miii_nway_restart() causes a PHY link change activity and
ax88772_link_reset will be called. link_reset will set
AX_CMD_WRITE_MEDIUM_MODE register correctly.
The asix_write_medium_mode in reset() fills in a default value to the register
which may be different from the negotiation result. So do this first.
Ignore the ret value since it's ignored in XXX_link_reset() functions.
Signed-off-by: Grant Grundler <grundler@google.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Grant Grundler <grundler@chromium.org>
https://lkml.org/lkml/2014/11/11/947
Ben Hutchings is correct. IEEE 802.3 spec section "22.2.4.1.1 Reset" requires
up to 500ms delay. Mitigate the "max" delay by polling the phy until BCM_RESET
bit is clear.
Signed-off-by: Grant Grundler <grundler@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Allan Chou <allan@asix.com.tw>
The change fixes AX88772x resume failure by
- Restore incorrect AX88772A PHY registers when resetting
- Need to stop MAC operation when suspending
- Need to restart MII when restoring PHY
Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Vincent Palatin <vpalatin@chromium.org>
Check the answers from the USB stack and avoid re-sending multiple times
the request if the device has disappeared.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
From: Freddy Xin <freddy@asix.com.tw>
In order to R/W registers in suspend/resume functions, in_pm flags are
added to some functions to determine whether the nopm version of usb
functions is called.
Save BMCR and ANAR PHY registers in suspend function and restore them
in resume function.
Reset HW in resume function to ensure the PHY works correctly.
Signed-off-by: Freddy Xin <freddy@asix.com.tw>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Tested-by: Robert Foss <robert.foss@collabora.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sudarsana Reddy Kalluru says:
====================
qed*: dcbx fix series.
The series contains several small fixes for qed* dcbx module.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch takes care of clearing the uninitialized buffer before using it.
1. pfc pri-enable bitmap need to be cleared before setting the requested
enable bits. Without this, the un-touched values will be merged with
requested values and sent to MFW.
2. The data in app-entry field need to be cleared before using it.
3. Clear the output data buffer used in qed_dcbx_query_params().
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Management firmware requires the selection-field (SF) to be set for
configuring the application/protocol entry in IEEE mode. Without this
setting, the app entry will be configured incorrectly in MFW.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dcbx configuration is not supported for VF interfaces. Hence don't populate
the callbacks for VFs and also fail the dcbx-query for VFs.
Signed-off-by: Sudarsana Reddy Kalluru <sudarsana.kalluru@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry reported a double free on kcm socket, which could
be easily reproduced by:
#include <unistd.h>
#include <sys/syscall.h>
int main()
{
int fd = syscall(SYS_socket, 0x29ul, 0x5ul, 0x0ul, 0, 0, 0);
syscall(SYS_ioctl, fd, 0x89e2ul, 0x20a98000ul, 0, 0, 0);
return 0;
}
This is because on the error path, after we install
the new socket file, we call sock_release() to clean
up the socket, which leaves the fd pointing to a freed
socket. Fix this by calling sys_close() on that fd
directly.
Fixes: ab7ac4eb98 ("kcm: Kernel Connection Multiplexor module")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: Tom Herbert <tom@herbertland.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sean Wang says:
====================
net: ethernet: mediatek: a couple of fixes
a couple of fixes come out from integrating with linux-4.8 rc1
they all are verified and workable on linux-4.8 rc1
Changes since v1:
- usage of loops to work out if all required clock are ready instead
of tedious coding
- remove redundant pinctrl setup that is already done by core driver
thanks for careful and patient reviewing by Andrew Lunn
- splitting distinct changes into the separate patches
- change variable naming from err to ret for readable coding
Changes since v2:
- restore to original clock disabling sequence that is changed
accidentally in the last version
- refine the commit log that would cause misunderstanding what has
been done in the changes
- refine the commit log that would cause footnote losing due to
improper delimiter use
Changes since v3:
- fix git rejects caused by mixing a change from net-next, so
remake the patch set based on the current net branch again.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Return -ENODEV if the MDIO bus is disabled in the device tree.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
a lot of parts in the driver uses devm_* APIs to gain benefits from the
device resource management, so devm_mdiobus_alloc is also used instead
of mdiobus_alloc to have more elegant code flow.
Using common code provided by the devm_* helps to
1) have simplified the code flow as [1] says
2) decrease the risk of incorrect error handling by human
3) only a few drivers used it since it was proposed on linux 3.16,
so just hope to promote for this.
Ref:
[1] https://patchwork.ozlabs.org/patch/344093/
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the missing of_node_put() after finishing the usage
of of_get_child_by_name.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
mtk_stop() must be called to stop for freeing DMA
resources acquired and restoring state changed by mtk_open()
firstly when module removal.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
original mdio_cleanup is not in the symmetric place against where
mdio_init is, so relocate mdio_cleanup to the right one.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
these irqs are not used for shared irq and disabled during ethernet stops.
irq requested by devm_request_irq is safe to be freed automatically on
driver detach.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
use skb_free_frag() instead of legacy put_page()
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) If the return value of devm_clk_get is EPROBE_DEFER, we should
defer probing the driver. The change is verified and works based
on 4.8-rc1 staying with the latest clk-next code for MT7623.
2) Changing with the usage of loops to work out if all clocks
required are fine
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
which net device the SKB is complete for depends on the forward port
on txd4 on the corresponding TX descriptor, but the information isn't
set up well in case of SKB fragments that would lead to watchdog timeout
from the upper layer, so fix it up.
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Acked-by: John Crispin <john@phrozen.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check for ethtool_ops structures that are only stored in the ethtool_ops
field of a net_device structure or passed as the second argument to
netdev_set_default_ethtool_ops. These contexts are declared const, so
ethtool_ops structures that have these properties can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct ethtool_ops i@p = { ... };
@ok1@
identifier r.i;
struct net_device e;
position p;
@@
e.ethtool_ops = &i@p;
@ok2@
identifier r.i;
expression e;
position p;
@@
netdev_set_default_ethtool_ops(e, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct ethtool_ops i = { ... };
// </smpl>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check for ethtool_ops structures that are only stored in the ethtool_ops
field of a net_device structure or passed as the second argument to
netdev_set_default_ethtool_ops. These contexts are declared const, so
ethtool_ops structures that have these properties can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct ethtool_ops i@p = { ... };
@ok1@
identifier r.i;
struct net_device e;
position p;
@@
e.ethtool_ops = &i@p;
@ok2@
identifier r.i;
expression e;
position p;
@@
netdev_set_default_ethtool_ops(e, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct ethtool_ops i = { ... };
// </smpl>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Check for ethtool_ops structures that are only stored in the ethtool_ops
field of a net_device structure or passed as the second argument to
netdev_set_default_ethtool_ops. These contexts are declared const, so
ethtool_ops structures that have these properties can be declared as const
also.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct ethtool_ops i@p = { ... };
@ok1@
identifier r.i;
struct net_device e;
position p;
@@
e.ethtool_ops = &i@p;
@ok2@
identifier r.i;
expression e;
position p;
@@
netdev_set_default_ethtool_ops(e, &i@p)
@bad@
position p != {r.p,ok1.p,ok2.p};
identifier r.i;
@@
i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct ethtool_ops i = { ... };
// </smpl>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch simply fixes a typo in the error string printed in
the *_cooling_method_set function.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Currently the success/error checking logic is intermixed, making the
code a bit cumbersome to understand.
This patch changes the affected functions to first check for errors
and take appropriate actions, then check for the supported features.
This patch also separates the error check from the acpi_status and
the tci_raw function call error check, as those two are completely
unrelated and were nested in if/else statements.
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
This patch moves all the multiple line variable declaration to a
single line declaration (except variables being initialized)
following the reverse tree order, to conform to the practices
of the kernel.
[dvhart: corrected a couple minor inconsistencies in declaration ordering]
Signed-off-by: Azael Avalos <coproscefalo@gmail.com>
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
PELT does not consider SMT when scaling its utilization values via
arch_scale_cpu_capacity(). The value in rq->cpu_capacity_orig does
take SMT into consideration though and therefore may be smaller than
the utilization reported by PELT.
On an Intel i7-3630QM for example rq->cpu_capacity_orig is 589 but
util_avg scales up to 1024. This means that a 50% utilized CPU will show
up in schedutil as ~86% busy.
Fix this by using the same CPU scaling value in schedutil as that which
is used by PELT.
Signed-off-by: Steve Muckle <smuckle@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since cpufreq_policy_alloc() doesn't use its dev variable for
anything useful, drop that variable from there along with the
NULL check against it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
The APM X-Gene SoC UART is the only board that still needs
the hard-coded values, so handle it separately in
dw8250_quirks(). The other ACPI platforms are able to
provide the values with device properties.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
I ran into this:
================================================================================
UBSAN: Undefined behaviour in kernel/time/time.c:783:2
signed integer overflow:
5273 + 9223372036854771711 cannot be represented in type 'long int'
CPU: 0 PID: 17363 Comm: trinity-c0 Not tainted 4.8.0-rc1+ #88
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org
04/01/2014
0000000000000000 ffff88011457f8f0 ffffffff82344f50 0000000041b58ab3
ffffffff84f98080 ffffffff82344ea4 ffff88011457f918 ffff88011457f8c8
ffff88011457f8e0 7fffffffffffefff ffff88011457f6d8 dffffc0000000000
Call Trace:
[<ffffffff82344f50>] dump_stack+0xac/0xfc
[<ffffffff82344ea4>] ? _atomic_dec_and_lock+0xc4/0xc4
[<ffffffff8242f4c8>] ubsan_epilogue+0xd/0x8a
[<ffffffff8242fc04>] handle_overflow+0x202/0x23d
[<ffffffff8242fa02>] ? val_to_string.constprop.6+0x11e/0x11e
[<ffffffff823c7837>] ? debug_smp_processor_id+0x17/0x20
[<ffffffff8131b581>] ? __sigqueue_free.part.13+0x51/0x70
[<ffffffff8146d4e0>] ? rcu_is_watching+0x110/0x110
[<ffffffff8242fc4d>] __ubsan_handle_add_overflow+0xe/0x10
[<ffffffff81476ef8>] timespec64_add_safe+0x298/0x340
[<ffffffff81476c60>] ? timespec_add_safe+0x330/0x330
[<ffffffff812f7990>] ? wait_noreap_copyout+0x1d0/0x1d0
[<ffffffff8184bf18>] poll_select_set_timeout+0xf8/0x170
[<ffffffff8184be20>] ? poll_schedule_timeout+0x2b0/0x2b0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c8a87>] __sys_recvmmsg+0x107/0x790
[<ffffffff833c8980>] ? SyS_recvmsg+0x20/0x20
[<ffffffff81486378>] ? hrtimer_start_range_ns+0x3b8/0x1380
[<ffffffff845f8bfb>] ? _raw_spin_unlock_irqrestore+0x3b/0x60
[<ffffffff8148bcea>] ? do_setitimer+0x39a/0x8e0
[<ffffffff813aa9bb>] ? __might_sleep+0x5b/0x260
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff833c91e9>] SyS_recvmmsg+0xd9/0x160
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff823c7853>] ? __this_cpu_preempt_check+0x13/0x20
[<ffffffff8162f680>] ? __context_tracking_exit.part.3+0x30/0x1b0
[<ffffffff833c9110>] ? __sys_recvmmsg+0x790/0x790
[<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0
[<ffffffff845f936a>] entry_SYSCALL64_slow_path+0x25/0x25
================================================================================
Line 783 is this:
783 set_normalized_timespec64(&res, lhs.tv_sec + rhs.tv_sec,
784 lhs.tv_nsec + rhs.tv_nsec);
In other words, since lhs.tv_sec and rhs.tv_sec are both time64_t, this
is a signed addition which will cause undefined behaviour on overflow.
Note that this is not currently a huge concern since the kernel should be
built with -fno-strict-overflow by default, but could be a problem in the
future, a problem with older compilers, or other compilers than gcc.
The easiest way to avoid the overflow is to cast one of the arguments to
unsigned (so the addition will be done using unsigned arithmetic).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
In addition to keeping a histogram of suspend times, also
print out the time spent in suspend to dmesg.
This helps to keep track of suspend time while debugging using
kernel logs.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Signed-off-by: Ruchi Kandoi <kandoiruchi@google.com>
[jstultz: Tweaked commit message]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Clocksources don't get the VALID_FOR_HRES flag until they have been
checked by a watchdog. However, when using an override, the
clocksource_select logic will clear the override value if the
clocksource is not marked VALID_FOR_HRES during that inititial check.
When using the boot arguments clocksource=<foo>, this selection can
run before the watchdog, and can cause the override to be incorrectly
cleared.
To address this condition, the override_name is only invalidated for
unstable clocksources. Otherwise, the override is left intact until after
the watchdog has validated the clocksource as stable/unstable.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Kyle Walker <kwalker@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Guillaume Nault says:
====================
ppp: fix deadlock upon recursive xmit
This series fixes the issue reported by Feng where packets looping
through a ppp device makes the module deadlock:
https://marc.info/?l=linux-netdev&m=147134567319038&w=2
The problem can occur on virtual interfaces (e.g. PPP over L2TP, or
PPPoE on vxlan devices), when a PPP packet is routed back to the PPP
interface.
PPP's xmit path isn't reentrant, so patch #1 uses a per-cpu variable
to detect and break recursion. Patch #2 sets the NETIF_F_LLTX flag to
avoid lock inversion issues between ppp and txqueue locks.
There are multiple entry points to the PPP xmit path. This series has
been tested with lockdep and should address recursion issues no matter
how the packet entered the path.
A similar issue in L2TP is not covered by this series:
l2tp_xmit_skb() also isn't reentrant, and it can be called as part of
PPP's xmit path (pppol2tp_xmit()), or directly from the L2TP socket
(l2tp_ppp_sendmsg()). If a packet is sent by l2tp_ppp_sendmsg() and
routed to the parent PPP interface, then it's going to hit
l2tp_xmit_skb() again.
Breaking recursion as done in ppp_generic is not enough, because we'd
still have a lock inversion issue (locking in l2tp_xmit_skb() can
happen before or after locking in ppp_generic). The best approach would
be to use the ip_tunnel functions and remove the socket locking in
l2tp_xmit_skb(). But that'd be something for net-next.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of misconfiguration, a virtual PPP channel might send packets
back to their parent PPP interface. This typically happens in
misconfigured L2TP setups, where PPP's peer IP address is set with the
IP of the L2TP peer.
When that happens the system hangs due to PPP trying to recursively
lock its xmit path.
[ 243.332155] BUG: spinlock recursion on CPU#1, accel-pppd/926
[ 243.333272] lock: 0xffff880033d90f18, .magic: dead4ead, .owner: accel-pppd/926, .owner_cpu: 1
[ 243.334859] CPU: 1 PID: 926 Comm: accel-pppd Not tainted 4.8.0-rc2 #1
[ 243.336010] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[ 243.336018] ffff7fffffffffff ffff8800319a77a0 ffffffff8128de85 ffff880033d90f18
[ 243.336018] ffff880033ad8000 ffff8800319a77d8 ffffffff810ad7c0 ffffffff0000039e
[ 243.336018] ffff880033d90f18 ffff880033d90f60 ffff880033d90f18 ffff880033d90f28
[ 243.336018] Call Trace:
[ 243.336018] [<ffffffff8128de85>] dump_stack+0x4f/0x65
[ 243.336018] [<ffffffff810ad7c0>] spin_dump+0xe1/0xeb
[ 243.336018] [<ffffffff810ad7f0>] spin_bug+0x26/0x28
[ 243.336018] [<ffffffff810ad8b9>] do_raw_spin_lock+0x5c/0x160
[ 243.336018] [<ffffffff815522aa>] _raw_spin_lock_bh+0x35/0x3c
[ 243.336018] [<ffffffffa01a88e2>] ? ppp_push+0xa7/0x82d [ppp_generic]
[ 243.336018] [<ffffffffa01a88e2>] ppp_push+0xa7/0x82d [ppp_generic]
[ 243.336018] [<ffffffff810adada>] ? do_raw_spin_unlock+0xc2/0xcc
[ 243.336018] [<ffffffff81084962>] ? preempt_count_sub+0x13/0xc7
[ 243.336018] [<ffffffff81552438>] ? _raw_spin_unlock_irqrestore+0x34/0x49
[ 243.336018] [<ffffffffa01ac657>] ppp_xmit_process+0x48/0x877 [ppp_generic]
[ 243.336018] [<ffffffff81084962>] ? preempt_count_sub+0x13/0xc7
[ 243.336018] [<ffffffff81408cd3>] ? skb_queue_tail+0x71/0x7c
[ 243.336018] [<ffffffffa01ad1c5>] ppp_start_xmit+0x21b/0x22a [ppp_generic]
[ 243.336018] [<ffffffff81426af1>] dev_hard_start_xmit+0x15e/0x32c
[ 243.336018] [<ffffffff81454ed7>] sch_direct_xmit+0xd6/0x221
[ 243.336018] [<ffffffff814273a8>] __dev_queue_xmit+0x52a/0x820
[ 243.336018] [<ffffffff814276a9>] dev_queue_xmit+0xb/0xd
[ 243.336018] [<ffffffff81430a3c>] neigh_direct_output+0xc/0xe
[ 243.336018] [<ffffffff8146b5d7>] ip_finish_output2+0x4d2/0x548
[ 243.336018] [<ffffffff8146a8e6>] ? dst_mtu+0x29/0x2e
[ 243.336018] [<ffffffff8146d49c>] ip_finish_output+0x152/0x15e
[ 243.336018] [<ffffffff8146df84>] ? ip_output+0x74/0x96
[ 243.336018] [<ffffffff8146df9c>] ip_output+0x8c/0x96
[ 243.336018] [<ffffffff8146d55e>] ip_local_out+0x41/0x4a
[ 243.336018] [<ffffffff8146dd15>] ip_queue_xmit+0x531/0x5c5
[ 243.336018] [<ffffffff814a82cd>] ? udp_set_csum+0x207/0x21e
[ 243.336018] [<ffffffffa01f2f04>] l2tp_xmit_skb+0x582/0x5d7 [l2tp_core]
[ 243.336018] [<ffffffffa01ea458>] pppol2tp_xmit+0x1eb/0x257 [l2tp_ppp]
[ 243.336018] [<ffffffffa01acf17>] ppp_channel_push+0x91/0x102 [ppp_generic]
[ 243.336018] [<ffffffffa01ad2d8>] ppp_write+0x104/0x11c [ppp_generic]
[ 243.336018] [<ffffffff811a3c1e>] __vfs_write+0x56/0x120
[ 243.336018] [<ffffffff81239801>] ? fsnotify_perm+0x27/0x95
[ 243.336018] [<ffffffff8123ab01>] ? security_file_permission+0x4d/0x54
[ 243.336018] [<ffffffff811a4ca4>] vfs_write+0xbd/0x11b
[ 243.336018] [<ffffffff811a5a0a>] SyS_write+0x5e/0x96
[ 243.336018] [<ffffffff81552a1b>] entry_SYSCALL_64_fastpath+0x13/0x94
The main entry points for sending packets over a PPP unit are the
.write() and .ndo_start_xmit() callbacks (simplified view):
.write(unit fd) or .ndo_start_xmit()
\
CALL ppp_xmit_process()
\
LOCK unit's xmit path (ppp->wlock)
|
CALL ppp_push()
\
LOCK channel's xmit path (chan->downl)
|
CALL lower layer's .start_xmit() callback
\
... might recursively call .ndo_start_xmit() ...
/
RETURN from .start_xmit()
|
UNLOCK channel's xmit path
/
RETURN from ppp_push()
|
UNLOCK unit's xmit path
/
RETURN from ppp_xmit_process()
Packets can also be directly sent on channels (e.g. LCP packets):
.write(channel fd) or ppp_output_wakeup()
\
CALL ppp_channel_push()
\
LOCK channel's xmit path (chan->downl)
|
CALL lower layer's .start_xmit() callback
\
... might call .ndo_start_xmit() ...
/
RETURN from .start_xmit()
|
UNLOCK channel's xmit path
/
RETURN from ppp_channel_push()
Key points about the lower layer's .start_xmit() callback:
* It can be called directly by a channel fd .write() or by
ppp_output_wakeup() or indirectly by a unit fd .write() or by
.ndo_start_xmit().
* In any case, it's always called with chan->downl held.
* It might route the packet back to its parent unit using
.ndo_start_xmit() as entry point.
This patch detects and breaks recursion in ppp_xmit_process(). This
function is a good candidate for the task because it's called early
enough after .ndo_start_xmit(), it's always part of the recursion
loop and it's on the path of whatever entry point is used to send
a packet on a PPP unit.
Recursion detection is done using the per-cpu ppp_xmit_recursion
variable.
Since ppp_channel_push() too locks the channel's xmit path and calls
the lower layer's .start_xmit() callback, we need to also increment
ppp_xmit_recursion there. However there's no need to check for
recursion, as it's out of the recursion loop.
Reported-by: Feng Gao <gfree.wind@gmail.com>
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Casting away const is bad practice. Since this is ARM specific driver
don't have hardware actually test this.
Having getter functions for ops is really unnecessary code bloat, but
not going to touch that.
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot says:
====================
net: dsa: add MDB support
This patchset adds the switchdev MDB object support to the DSA layer.
The MDB support for the mv88e6xxx driver is very similar to the FDB
support. The FDB operations care about unicast addresses while the MDB
operations care about multicast addresses.
Both operation set load/purge/dump the Address Translation Table (ATU),
thus common code is used.
Changes in v2 based on Andrew's comments:
- drop "group" in multicast database related doc and comment
- change _one for more relevant _fid in mv88e6xxx_port_db_dump_one
- return -EOPNOTSUPP if switchdev obj ID is neither _FDB nor _MDB
====================
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the MDB operations. This consists of
loading/purging/dumping multicast addresses for a given port in the ATU.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
