This is a basic driver for the Surface 3. I am not so sure it will work
with any firmwares as most values are encoded, but given that I only have
access to my current device with its firmware and I don't have the
datasheet, it should be OK for now.
The Surface Pen is not supported (if it is supposed to be). I'll work on
this when I get one.
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit 4369c64c79 ("Input: Send events one packet at a time")
significantly reduced amount of entropy input core was feeding to the rest
of the system, because only the very first event in the event block would
be used as source of entropy.
With this change we will be calling add_input_randomness() for every event
that is not filtered by the input core as a duplicate. In addition, all
EV_SYN events are ignored.
Acked-by: Henrik Rydberg <rydberg@bitmath.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The migor touchscreen driver is now available for COMPILE_TEST,
so we run into a harmless randconfig warning on ARM when CONFIG_PM
is disabled:
drivers/input/touchscreen/migor_ts.c:216:12: error: 'migor_ts_resume' defined but not used [-Werror=unused-function]
drivers/input/touchscreen/migor_ts.c:205:12: error: 'migor_ts_suspend' defined but not used [-Werror=unused-function]
This shuts up the warning by marking the two functions as __maybe_unused.
We could do the same thing by adding an #ifdef, but this version is
more reliable.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The newly added Atmal captouch driver fails to build when CONFIG_I2C
is disabled:
drivers/input/misc/atmel_captouch.c: In function 'atmel_read':
drivers/input/misc/atmel_captouch.c:115:8: error: implicit declaration of function 'i2c_transfer' [-Werror=implicit-function-declaration]
This adds an explicit Kconfig dependency to prevent the broken
configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: b06d43f7a3 ("Input: add Atmel Captouch Button driver")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull security subsystem updates from James Morris:
"Highlights:
- A new LSM, "LoadPin", from Kees Cook is added, which allows forcing
of modules and firmware to be loaded from a specific device (this
is from ChromeOS, where the device as a whole is verified
cryptographically via dm-verity).
This is disabled by default but can be configured to be enabled by
default (don't do this if you don't know what you're doing).
- Keys: allow authentication data to be stored in an asymmetric key.
Lots of general fixes and updates.
- SELinux: add restrictions for loading of kernel modules via
finit_module(). Distinguish non-init user namespace capability
checks. Apply execstack check on thread stacks"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (48 commits)
LSM: LoadPin: provide enablement CONFIG
Yama: use atomic allocations when reporting
seccomp: Fix comment typo
ima: add support for creating files using the mknodat syscall
ima: fix ima_inode_post_setattr
vfs: forbid write access when reading a file into memory
fs: fix over-zealous use of "const"
selinux: apply execstack check on thread stacks
selinux: distinguish non-init user namespace capability checks
LSM: LoadPin for kernel file loading restrictions
fs: define a string representation of the kernel_read_file_id enumeration
Yama: consolidate error reporting
string_helpers: add kstrdup_quotable_file
string_helpers: add kstrdup_quotable_cmdline
string_helpers: add kstrdup_quotable
selinux: check ss_initialized before revalidating an inode label
selinux: delay inode label lookup as long as possible
selinux: don't revalidate an inode's label when explicitly setting it
selinux: Change bool variable name to index.
KEYS: Add KEYCTL_DH_COMPUTE command
...
Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use kmemdup when some other buffer is immediately copied into allocated
region. It replaces call to allocation followed by memcpy, by a single
call to kmemdup.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vendor ID for Creative technology.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
This patch adds binding information for IBM/AMCC/APM GPIO
Controllers of the PowerPC 4XX series and compatible SoCs.
The "PowerPC 405EP Embedded Processor Data Sheet" has the
following to say about the GPIO controllers: "
- Controller functions and GPIO registers are programmed
and accessed via memory-mapped OPB bus master accesses
- All GPIOs are pin-shared with other functions. DCRs control
whether a particular pin that has GPIO capabilities acts
as a GPIO or is used for another purpose.
- Each GPIO outputs is separately programmable to emulate
an open-drain driver (i.e. drives to zero, threestated if
output bit is 1)
"
The ppc4xx_gpio.c driver is part of the platform/sysdev drivers
in arch/powerpc/sysdev.
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
The OF_UNITTEST Kconfig symbol is bool so this unittest can only be
built-in and not build as a module. Also, nothing defined in this
header file used so is not necessary to include it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Function populate_node() is used to unflatten FDT blob to device
tree. It supports maximal 64 level of device nodes. There is one
array @fpsizes[64] tracking the full name length of last unflattened
device node in the corresponding level (index of element in the
array - 1). Build warning is seen with CONFIG_FRAME_WARN=1024 like
below on ARM64 as Geert reported. The issue can be reproduced on
PPC64 as well.
$ make drivers/of/fdt.o
drivers/of/fdt.c:443:1: warning: the frame size of 1136 bytes is \
larger than 1024 bytes [-Wframe-larger-than=]
This changes the data type of @fpsizes[i] from "unsigned long" to
"unsigned int" to avoid the build warning. The return value type
of populate_node() and its @fpsize argument is adjusted accordingly.
With this applied, 256 bytes saved from the stack frame on ARM64 and
PPC64 platforms and the above warning isn't seen.
Fixes: 50800082f1 ("drivers/of: Avoid recursively calling unflatten_dt_node()")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
When the implementation for unflatten_dt_node() changed from being
recursive to being non-recursive, it had a side effect of increasing the
depth passed to fdt_next_node() by 1. This is fine most of the time, but
it seems that when the end of the dtb is being parsed, it will cause the
FDT_END condition in fdt_next_node() to return a different value
(returning nextoffset instead of -FDT_ERR_NOTFOUND). This ends up passing
an FDT_ERR_TRUNCATED error back to the unflatten_dt_node() which then
sees that and complains "Error -8 processing FDT" causing boot to fail.
This patch simply avoids incrementing depth and uses modified accesses
for local array indices so that the depth is the same as it was before
the change as far as fdt_next_node() is concerned.
This problem was discovered trying to boot Tegra210-Smaug platforms.
Fixes: 50800082f1 ("drivers/of: Avoid recursively calling unflatten_dt_node()")
Signed-off-by: Rhyland Klein <rklein@nvidia.com>
[robh: squashed in KASAN fix from Rhyland]
Signed-off-by: Rob Herring <robh@kernel.org>
On ARM64, the mtk-pmic-wrap driver causes a harmless warning:
mtk-pmic-wrap.c:1062:16: warning: large integer implicitly truncated to unsigned type [-Woverflow]
mtk-pmic-wrap.c:1074:16: warning: large integer implicitly truncated to unsigned type [-Woverflow]
mtk-pmic-wrap.c:1086:16: warning: large integer implicitly truncated to unsigned type [-Woverflow]
.int_en_all = ~(BIT(31) | BIT(1)),
The problem is that the result of the BIT() macro is an 'unsigned long',
so taking the bitwise NOT operation of that results in an integer
with the upper 32 bits all set and that cannot be assigned to a
'u32' variable without loss of information.
This is harmless because we were never interested in the upper bits
here anyway, so we can shut up the warning by adding a simple cast
to 'u32'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
If planes are added to the state after the call to
drm_atomic_helper_check_planes planes_changed may not be set
and we will not unpin the old framebuffer. This results in a
pin leak long after the framebuffer is destroyed, so to find
this add some checks when it happens.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-21-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
intel_unpin_work may not take the list lock because it requires the connector_mutex.
To prevent taking locks we add an array of old and new state. The old state to free,
the new state to commit and verify.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-18-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Create a work structure that will be used for all changes. This will
be used later on in the atomic commit function.
Changes since v1:
- Free old_crtc_state from unpin_work_fn properly.
Changes since v2:
- Add hunk for calling hw state verifier.
- Add missing support for color spaces.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-12-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
With intel_pipe_update begin/end we ensure that the mmio updates
don't run during vblank interrupt, using the hw counter we can
be sure that when current vblank count != vblank count at the time
of pipe_update_end the mmio update is complete.
This allows us to use mmio updates on all platforms, using the
update_plane call.
With Chris Wilson's patch to skip waiting for vblanks for
legacy_cursor_update this potentially leaves a small race
condition, in which update_plane can be called with a freed
crtc_state. Because of this commit acf4e84d61
("drm/i915: Avoid stalling on pending flips for legacy cursor updates")
is temporarily reverted.
Changes since v1:
- Split out the flip_work rename.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-9-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Rename intel_unpin_work to intel_flip_work and use it for mmio flips
and unpinning. Use flip_queued_req to hold the wait request in the
mmio case, and the vblank counter from intel_crtc_get_vblank_counter.
MMIO flips get their own path through intel_finish_page_flip_mmio,
handled on vblank. CS page flips go through *_cs.
Changes since v1:
- Clean up destinction between MMIO and CS flips.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-7-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Instead of calling prepare_flip right before calling finish_page_flip
do everything from prepare_page_flip in finish_page_flip.
Putting prepare and finish page_flip in a single step removes the need
for INTEL_FLIP_COMPLETE, so it can be removed. This simplifies the code
slightly.
Changes since v1:
- Invert if case to simplify code.
- Add missing barrier.
- Reword commit message.
Changes since v2:
- intel_page_flip_plane is removed.
- work->pending is turned into a bool.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-5-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
Both intel_unpin_work.pending and intel_unpin_work.enable_stall_check
were used to see if work should be enabled. By only using pending
some special cases are gone, and access to unpin_work can be simplified.
A flip could previously be queued before
stallcheck was active. With the addition of the pending member
enable_stall_check became obsolete and can thus be removed.
Use this to only access work members untilintel_mark_page_flip_active
is called, or intel_queue_mmio_flip is used. This will prevent
use-after-free, and makes it easier to verify accesses.
Changes since v1:
- Reword commit message.
- Do not access unpin_work after intel_mark_page_flip_active.
- Add the right memory barriers.
Changes since v2:
- atomic_read() needs a full smp_rmb.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-3-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
This function is useful for gen2 intel devices which have no frame
counter, but need a way to determine the current vblank count without
racing with the vblank interrupt handler.
intel_pipe_update_start checks if no vblank interrupt will occur
during vblank evasion, but cannot check whether the vblank handler has
run to completion. This function uses the timestamps to determine
when the last vblank has happened, and interpolates from there.
Changes since v1:
- Take vblank_time_lock and don't use drm_vblank_count_and_time.
Changes since v2:
- Don't return time of last vblank.
Changes since v3:
- Change pipe to unsigned int. (Ville)
- Remove unused documentation for tv_ret. (kbuild)
Changes since v4:
- Add warning to docs when the function is useful.
- Add a WARN_ON when get_vblank_timestamp is unavailable.
- Use drm_vblank_count.
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> #v4
Acked-by: David Airlie <airlied@linux.ie> #irc, v4
Link: http://patchwork.freedesktop.org/patch/msgid/1463490484-19540-2-git-send-email-maarten.lankhorst@linux.intel.com
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
UDF/OSTA terminology is confusing. Partition Numbers (PNs) are arbitrary
16-bit values, one for each physical partition in the volume. Partition
Reference Numbers (PRNs) are indices into the the Partition Map Table
and do not necessarily equal the PN of the mapped partition.
The current metadata code mistakenly uses the PN instead of the PRN when
mapping metadata blocks to physical/sparable blocks. Windows-created
UDF 2.5 discs for some reason use large, arbitrary PNs, resulting in
mount failure and KASAN read warnings in udf_read_inode().
For example, a NetBSD UDF 2.5 partition might look like this:
PRN PN Type
--- -- ----
0 0 Sparable
1 0 Metadata
Since PRN == PN, we are fine.
But Windows could gives us:
PRN PN Type
--- ---- ----
0 8192 Sparable
1 8192 Metadata
So udf_read_inode() will start out by checking the partition length in
sbi->s_partmaps[8192], which is obviously out of bounds.
Fix this by creating a new field (s_phys_partition_ref) in struct
udf_meta_data, referencing whatever physical or sparable map has the
same partition number as the metadata partition.
[JK: Add comment about s_phys_partition_ref, change its name]
Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
In some rare randconfig builds, we can end up with
ASYMMETRIC_PUBLIC_KEY_SUBTYPE enabled but CRYPTO_AKCIPHER disabled,
which fails to link because of the reference to crypto_alloc_akcipher:
crypto/built-in.o: In function `public_key_verify_signature':
:(.text+0x110e4): undefined reference to `crypto_alloc_akcipher'
This adds a Kconfig 'select' statement to ensure the dependency
is always there.
Cc: <stable@vger.kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This if statement is reversed so we end up either leaking or Oopsing on
error.
Fixes: dbe246209b ('crypto: omap-sham - Use dma_request_chan() for requesting DMA channel')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently when udf_get_pblock_meta25() fails to map a block using the
primary metadata file, it will attempt to load the mirror file entry by
calling udf_find_metadata_inode_efe(). That function will return a ERR_PTR
if it fails, but the return value is only checked against NULL. Test the
return value using IS_ERR() and change it to NULL if needed.
Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently, if a metadata partition map is missing its partition descriptor,
then udf_get_pblock_meta25() will BUG() out the first time it is called.
This is rather drastic for a corrupted filesystem, so just treat this case
as an invalid mapping instead.
Signed-off-by: Alden Tondettar <alden.tondettar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
By default, "seq" counts from 1, but processes were starting counting
from 0, so when interrupted, coccicheck would leave the 0th process
running.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Nicolas Palix <nicolas.palix@imag.fr>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Michal Marek <mmarek@suse.com>
In case of usage of skb_vlan_push/pop, in the prologue we store
the SKB pointer on the stack and restore it after BPF_JMP_CALL
to skb_vlan_push/pop.
Unfortunately currently there are two bugs in the code:
1) The wrong stack slot (offset 170 instead of 176) is used
2) The wrong register (W1 instead of B1) is saved
So fix this and use correct stack slot and register.
Fixes: 9db7f2b818 ("s390/bpf: recache skb->data/hlen for skb_vlan_push/pop")
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The s390 BFP compiler currently uses relative branch instructions
that only support jumps up to 64 KB. Examples are "j", "jnz", "cgrj",
etc. Currently the maximum size of s390 BPF programs is set
to 0x7ffff. If branches over 64 KB are generated the, kernel can
crash due to incorrect code.
So fix this an reduce the maximum size to 64 KB. Programs larger than
that will be interpreted.
Fixes: ce2b6ad9c1 ("s390/bpf: increase BPF_SIZE_MAX")
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
With CONFIG_FRAME_POINTER enabled, a thunk can pass a bad return address
value to the called function. '9*8(%rsp)' actually gets the frame
pointer, not the return address.
The only users of the 'put_ret_addr_in_rdi' option are two functions
which trace the enabling and disabling of interrupts, so this bug can
result in bad debug or tracing information with CONFIG_IRQSOFF_TRACER or
CONFIG_PROVE_LOCKING.
Fix this by implementing the suggestion of Linus: explicitly push
the frame pointer all the time and constify the stack offsets that
way. This is both correct and easier to read.
Reported-by: Matt Fleming <matt@codeblueprint.co.uk>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
[ Extended the changelog a bit. ]
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alex Thorlton <athorlton@sgi.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 058fb73274 ("x86/asm/entry: Create stack frames in thunk functions")
Link: http://lkml.kernel.org/r/20160517180606.v5o7wcgdni7443ol@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Greybus modules will sometimes fail to send the mailbox poke and
erroneously be enumerated as UniPro-only modules. The root cause for
this on the module side is not fully understand, but it seems that this
may be due to "the bootrom bug:" a known problem with the bootrom where
linkup will occasionally fail because of a race condition.
Before the new hotplug code was implemented in the firmware, the SVC
would retry enumeration of modules that did not send the mailbox poke;
this patch ports that functionality to the AP.
Signed-off-by: Jeffrey Carlyle <jcarlyle@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
1) With the changing of the code for filtering events by pid, from
a list of pids to a bitmask, we can now easily implement following
forks. With a new tracing option "event-fork" which, when set, will
have tasks with pids in set_event_pid, when they fork, to have their
child pids added to set_event_pid and the child will be traced as well.
Note, if "event-fork" is set and a task with its pid in set_event_pid
exits, its pid will be removed from set_event_pid
2) The addition of Tom Zanussi's hist triggers. This includes a very
thorough documentatino on how to use the hist triggers with events.
This introduces a quick and easy way to get histogram data from
events and their fields.
Some other cleanups and updates were added as well. Like Masami Hiramatsu
added test cases for the event trigger and hist triggers. Also I added
a speed up of filtering by using a temp buffer when filters are set.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJXPIv1AAoJEKKk/i67LK/8WZcIAIaaHJMctDCfXPg8OoT1LLI/
yUxgWvQRM7iwGV8YjuaXlyxTDJU0XVoNpPF5ZGiePlRDSCUboNvgcNVHRusJJKqM
oV1BTsq2x5eY12agA8kSOHcqGP7saqa2H+RJ4+3jNB/DTtOwJ8RzodlqWQ7PZbRG
0IDvD7buh9NeDS2am835RB+Xhy/jNBrkoJjpvMNaG5nZypsMq8D524RzyBm6RYjp
p+KLo3/yDc0+khv1hIs1c/w+LXNs7XtpPjpAKBa8B4xOiXndh3IosjX3JnL+0f+6
EvXt6qRfBKCE5o2BM397qjE3V/L0/SfzTijuL1WMd88ZvPGqwcsslQekmxKAb1E=
=WBTB
-----END PGP SIGNATURE-----
Merge tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing updates from Steven Rostedt:
"This includes two new updates for the ftrace infrastructure.
- With the changing of the code for filtering events by pid, from a
list of pids to a bitmask, we can now easily implement following
forks. With a new tracing option "event-fork" which, when set,
will have tasks with pids in set_event_pid, when they fork, to have
their child pids added to set_event_pid and the child will be
traced as well.
Note, if "event-fork" is set and a task with its pid in
set_event_pid exits, its pid will be removed from set_event_pid
- The addition of Tom Zanussi's hist triggers. This includes a very
thorough documentatino on how to use the hist triggers with events.
This introduces a quick and easy way to get histogram data from
events and their fields.
Some other cleanups and updates were added as well. Like Masami
Hiramatsu added test cases for the event trigger and hist triggers.
Also I added a speed up of filtering by using a temp buffer when
filters are set"
* tag 'trace-v4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (45 commits)
tracing: Use temp buffer when filtering events
tracing: Remove TRACE_EVENT_FL_USE_CALL_FILTER logic
tracing: Remove unused function trace_current_buffer_lock_reserve()
tracing: Remove one use of trace_current_buffer_lock_reserve()
tracing: Have trace_buffer_unlock_commit() call the _regs version with NULL
tracing: Remove unused function trace_current_buffer_discard_commit()
tracing: Move trace_buffer_unlock_commit{_regs}() to local header
tracing: Fold filter_check_discard() into its only user
tracing: Make filter_check_discard() local
tracing: Move event_trigger_unlock_commit{_regs}() to local header
tracing: Don't use the address of the buffer array name in copy_from_user
tracing: Handle tracing_map_alloc_elts() error path correctly
tracing: Add check for NULL event field when creating hist field
tracing: checking for NULL instead of IS_ERR()
tracing: Do not inherit event-fork option for instances
tracing: Fix unsigned comparison to zero in hist trigger code
kselftests/ftrace: Add a test for log2 modifier of hist trigger
tracing: Add hist trigger 'log2' modifier
kselftests/ftrace: Add hist trigger testcases
kselftests/ftrace : Add event trigger testcases
...
