This patch adds a new 'firmware' folder in Documentation, which contains
two files:
- firmware-management: This describes the userspace interface for
interacting with firmware-management bundle.
- firmware.c: Sample application to test firmware load for Interface
Firmware and firmware updates to Backend Interface Firmware.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jun Li <li_jun@projectara.com>
Tested-by: Karthik Ravi Shankar <karthikrs@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds SPI Protocol support to firmware core, which allows the
AP to access an SPI flash memory present with an Interface.
Tested by using the API from fw-management driver and compiling it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The fw-management driver rightly destroys the char device on
connection-exit, but that doesn't guarantee that all of the users of the
device are gone.
Userspace may still be holding file-descriptor of the char device and
can initiate new ioctl operations. And that *will* lead to kernel crash.
To avoid this issue, manage struct users with kref, manage a list of
'struct fw-mgmt' and start using the structure only after getting its
kref incremented.
The important part is the routine get_fw_mgmt(), which increments the
reference to the struct before returning it to the caller. The list of
fw-mgmt structs in protected with a mutex to avoid any races around
that.
The kref is incremented once the char device is opened and dropped only
when it is closed.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Once the interface firmware is loaded successfully to a module,
userspace can ask it to mode switch to the newly loaded firmware.
This patch provides a new ioctl to initiate mode switch.
Userspace can initiate a mode switch if it has previously loaded the
interface firmware successfully, otherwise the firmware core rejects it.
Also, once the mode-switch is initiated, disallow any more interactions
from the userspace.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Tested-by: Karthik Ravi Shankar <karthikrs@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds Firmware Management Protocol support to firmware core,
which allows the AP to manage firmware on an Interface.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Jun Li <li_jun@projectara.com>
Tested-by: Karthik Ravi Shankar <karthikrs@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
'make check' correctly complains that this should be static, so make it
so.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
spilib can be used by multiple bridge drivers implementing different
bundle classes. Separate out bridged PHY bundle drivers parts.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch restructures spi.c as spilib core, so that the same logic can
be reused for SPI connections implemented as part of different bundle
types. This is required for Firmware Management Bundle.
Note that the 'struct gb_protocol' and its callback aren't moved to
a separate file in this commit to make its reviews easier. That will be
done by a following patch.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Switchdev has been around for quite a while now, putting "EXPERIMENTAL"
in the description is no longer accurate, drop it.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Original implementation commit e54bcde3d6 ("arm64: eBPF JIT compiler")
had the relevant code paths, but due to an oversight always fail jiting.
As a result, we had been falling back to BPF interpreter whenever a BPF
program has JMP_JSET_{X,K} instructions.
With this fix, we confirm that the corresponding tests in lib/test_bpf
continue to pass, and also jited.
...
[ 2.784553] test_bpf: #30 JSET jited:1 188 192 197 PASS
[ 2.791373] test_bpf: #31 tcpdump port 22 jited:1 325 677 625 PASS
[ 2.808800] test_bpf: #32 tcpdump complex jited:1 323 731 991 PASS
...
[ 3.190759] test_bpf: #237 JMP_JSET_K: if (0x3 & 0x2) return 1 jited:1 110 PASS
[ 3.192524] test_bpf: #238 JMP_JSET_K: if (0x3 & 0xffffffff) return 1 jited:1 98 PASS
[ 3.211014] test_bpf: #249 JMP_JSET_X: if (0x3 & 0x2) return 1 jited:1 120 PASS
[ 3.212973] test_bpf: #250 JMP_JSET_X: if (0x3 & 0xffffffff) return 1 jited:1 89 PASS
...
Fixes: e54bcde3d6 ("arm64: eBPF JIT compiler")
Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Acked-by: Yang Shi <yang.shi@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, when creating or updating a route, no check is performed
in both ipv4 and ipv6 code to the hoplimit value.
The caller can i.e. set hoplimit to 256, and when such route will
be used, packets will be sent with hoplimit/ttl equal to 0.
This commit adds checks for the RTAX_HOPLIMIT value, in both ipv4
ipv6 route code, substituting any value greater than 255 with 255.
This is consistent with what is currently done for ADVMSS and MTU
in the ipv4 code.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The slab name ends up being visible in the directory structure under
/sys, and even if you don't have access rights to the file you can see
the filenames.
Just use a 64-bit counter instead of the pointer to the 'net' structure
to generate a unique name.
This code will go away in 4.7 when the conntrack code moves to a single
kmemcache, but this is the backportable simple solution to avoiding
leaking kernel pointers to user space.
Fixes: 5b3501faa8 ("netfilter: nf_conntrack: per netns nf_conntrack_cachep")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull vfs fixes from Al Viro:
"Overlayfs fixes from Miklos, assorted fixes from me.
Stable fodder of varying severity, all sat in -next for a while"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
ovl: ignore permissions on underlying lookup
vfs: add lookup_hash() helper
vfs: rename: check backing inode being equal
vfs: add vfs_select_inode() helper
get_rock_ridge_filename(): handle malformed NM entries
ecryptfs: fix handling of directory opening
atomic_open(): fix the handling of create_error
fix the copy vs. map logics in blk_rq_map_user_iov()
do_splice_to(): cap the size before passing to ->splice_read()
The bmp280 driver also supports BMP180 which has a different chip id
with BMP280. The probe routine verifies that the device reports the
correct chip id but the error message is confusing as if BMP280's chip
id is always expected.
Reported-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Matt Ranostay <mranostay@gmail.com>
Cc: Vlad Dogaru <vlad.dogaru@intel.com>
Cc: Christoph Mair <christoph.mair@gmail.com>
Cc: Jonathan Cameron <jic23@kernel.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit adds basic support for the Bosch Sensortec BMA220
digital triaxial acceleration sensor.
The device datasheet can be found here:
http://www.mouser.com/pdfdocs/BSTBMA220DS00308.PDF
Includes:
- raw readings
- ACPI detection
- power management
Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
These protocols are managed under the bridged PHY class and doesn't need
protocol specific classes anymore.
Remove their entries from gb_gpbridge_id_table array and remove the now
unused macro's and mark their values as unused.
Tested on EVT 1.5 with generic-test module.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Sandeep Patil <sspatil@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_gpbridge_builtin_driver() isn't used anymore, remove it.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Rename gb-phy.ko module as gb-gpbridge.ko.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create separate module for usb gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create separate module for uart gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create separate module for spi gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create separate module for sdio gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create separate module for pwm gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create separate module for i2c gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create separate module for gpio gpbridge driver.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Create module_gpbridge_driver() for registering gpbridge module drivers.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In order to separate protocol specific drivers into their own modules,
some of the gpbridge routines need to be exported.
Tested on EVT 1.5 by inserting GP test module, all the devices were
enumerated correctly.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Actually I2C_FUNC_SMBUS_WORD_DATA isn't need for this device, and regmap
handles all single byte reads transparently.
Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
The WinSystems EBC-C384 watchdog timer driver supports two module
parameters: timeout and nowayout. These parameters should be documented
in the watchdog-parameters.txt file.
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The count field is redundant and unused. Drop it from the control
timesync_authoritative command.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
gb_control_timesync_get_last_event() sends a request asking for the
FrameTime at the last SVC strobe event. The responding entity returns the
FrameTime in the response phase of the request. Performing this operation
to an Interface after previously:
1. Synchronizing time using timesync-enable/timesync-authoritative
2. Sending an SVC_TIMESYNC_PING
will return the FrameTime of the responding entity at the SVC-ping. If
this command is sent before synchronization has been initiated or
successfully completed the responding entity should return an error
code.
- control.c::gb_control_timesync_get_last_event(u64 *frame_time)
Returns the FrameTime at the last SVC_TIMESYNC_PING to the AP Module.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Simple addition of the TimeSync commands defined in the specification.
Adds:
- svc.c::timesync_enable(u8 count, u64 frame_time, u32 strobe_delay,
u32 refclk)
Commands the SVC to initiate count TimeSync strobe pulses with
strobe_delay microseconds delay between each strobe to the specified
bit-mask of Interface IDs indicated in a previous
timesync_wake_pins_acquire command. The frame_time parameter indicates
the initial time the SVC should base the first strobe from. The refclk
parameter indicates the APs clock rate, the SVC should ensure its own
clock ticks at this rate. Once enabled the SVC may not enter a low-power
mode which will result in the reference timer used to track time
switching off. The SVC will capture the authoritative FrameTime at each
strobe and store these values for later propagation to the AP with the
timesync_authoritative request.
- svc.c::timesync_disable(void)
Commands the SVC to immediately halt TimeSync logic. This will allow
the SVC to transition into low-power modes where the reference timer
being used for TimeSync may switch off.
- svc.c::timesync_authoritative(u64 *frame_time)
Used by the AP Module to ask the SVC for the authoritative FrameTime
as captured at each TimeSync strobe.
- svc.c::timesync_ping(u64 *frame_time)
Used by the AP Module to command the SVC to initiate a single strobe on
a specified bit-mask of Interface IDs communicated in a previous
timesync_wake_pins_acquire command. SVC will latch the FrameTime on the
rising edge of the outbound pulse and will return the FrameTime to the
AP Module in the response phase of the greybus transaction.
- svc::timesync_wake_pins_acquire(u32 strobe_mask)
Used by the AP to tell the SVC to set a bit-mask of wake lines associated
with a bit-mask of Interface IDs to a known initial state prior to the
SVC generating a TimeSync related pulse such as timesync-enable or
timesync-ping.
- svc::timesync_wake_pins_release(void)
Used by the AP to tell the SVC to release all wake-detect lines in the
timesync active state as previously specified in the
timesync_wake_pins_acquire operation.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The function setup_timer combines the initialization of a timer with
the initialization of the timer's function and data fields.
The multiline code for timer initialization is now replaced
with function setup_timer.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The function setup_timer combines the initialization of a timer with
the initialization of the timer's function and data fields.
The multiline code for timer initialization is now replaced
with function setup_timer.
Signed-off-by: Muhammad Falak R Wani <falakreyaz@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Patch series from Jani Nikula:
> Jon, I was hoping we could consider nudging things forward a bit in the
> kernel-doc and docproc reStructuredText front already in 4.7. I know
> it's a bit close to the merge window, but this should not interfere with
> anything else, and some of it are just trivial cleanups that I've been
> carrying around locally.
>
> Obviously this doesn't actually add anything that uses them yet, but I
> think it would be helpful to have some common base in to ease
> collaboration.
As of commit ebd2c8f6d2 ("serial: kill off uart_info"), the
circular transmission buffer is part of struct uart_state instead of
struct uart_info. Make it clear this structure is pointed to from struct
uart_port.
Change 'circ' to 'circ_buf' to match the structure name while we're at
it.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Stop referring to the mutex member of the tty_port struct as
'port->mutex', as 'port' is ambiguous, and usually refers to the
uart_port struct in this document. Use 'tty_port->mutex' instead,
following the single existing use.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Add support for watchdogs (RWDT and SWDT) found on RCar Gen3 based SoCs
from Renesas.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
The restriction of kmem setting is not there anymore because the
accounting is enabled by default even in the cgroup v1 - see
b313aeee25 ("mm: memcontrol: enable kmem accounting for all
cgroups in the legacy hierarchy").
Update docs accordingly.
Signed-off-by: Qiang Huang <h.huangqiang@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Expect reStructuredText input and have kernel-doc produce
reStructuredText output with the new --rst option. Also add --docbook
option for completeness. If no option is given, default to
reStructuredText if the input file has ".rst" extension, DocBook
otherwise.
Directives for reStructuredText use .. ! instead of just !, to make them
reStructuredText comments.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Cleaner code. Also fixes a bug when F or P directives didn't in fact
have space.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
First, the headings for structs, enums and typedefs will be similar to
functions. Second, this provides a kind of namespace for cross
references. Third, and most importantly, the return and parameter types
from .. c:function:: definitions will automagically become cross
references to the documented types.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
If given the -rst flag, output will now be in RestructuredText. Various
glitches to be worked out yet.
In the end I decided not to use RST section headings within the kerneldoc
comments. gpu.tmpl already has headings five levels deep; adding more is
not going to bring clarity.
This is really just Jani Nikula's asciidoc change with the serial numbers
filed off. It's a hack job that doubtless needs a lot of cleaning up.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
