The Marvell Armada 7K/8K SoCs integrate a PCIe controller from Synopsys.
Add a new driver that provides the small glue needed to use the existing
Designware driver to make it work on Marvell Armada 7K/8K SoCs.
The MSI support will be enabled at a later point.
[bhelgaas: use dev_dbg(), dw_pcie_wait_for_link()]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
This commit adds the Device Tree binding documentation that allows to
describe the PCIe controller found in Marvell Armada 7K/8K SoCs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Rob Herring <rob@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
According to the TRM, SCM CONTROL_CSIRXFE register is on offset 0x6c
Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
Reviewed-By: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The boards use a TI variant of the PCF8575 so specify that
in the compatible string.
Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
As per the data sheet starting from SPRUHQ0H (Nov 2015 - Latest[1]),
VDD_CORE can vary from 0.85v to 1.15v for AVS class0. VDD GPU/DSP
et.al. can range from 0.85v to 1.25V with AVS class0
Since dynamic voltage scaling is disabled for DRA7/AM57xx SoCs for
all SoC rails other than MPU, the bootloader is responsible for
setting up the AVS class0 voltage, however, with wrong voltage machine
constraints in dtb, regulator framework will lower the voltage below
the required voltage levels for certain samples in production flow.
This can cause catastrophic failures which can be pretty hard to
identify.
Update board files which don't match required specification.
[1] http://www.ti.com/product/AM5728/datasheet/specifications#SPRT637-7340
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ldo4_reg is connected to DSS, and should always be 1.8V. However the The
dts defines a range of 1.5V-1.8V, which requires somethings to set the
actual voltage at runtime. Currently we set the voltage in omapdss
driver.
As the voltage must always be 1.8V, let's just define the range to 1.8V
so that the driver doesn't need to deal with the voltage. In fact, the
driver should not touch the voltage, except in the cases where the
voltage needs to be changed at runtime.
I presume the situation is the same for ldo1_reg, used for CSI, although
I think it is not currently used in the mainline.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
ldo4_reg is connected to DSS, and should always be 1.8V. However the
The dts defines a range of 1.5V-1.8V, which requires somethings to set
the actual voltage at runtime. Currently we set the voltage in omapdss
driver.
As the voltage must always be 1.8V, let's just define the range to 1.8V
so that the driver doesn't need to deal with the voltage. In fact, the
driver should not touch the voltage, except in the cases where the
voltage needs to be changed at runtime.
I presume the situation is the same for ldo1_reg, used for CSI, although
I think it is not currently used in the mainline.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
In c4iw_drain_sq/rq(), if the particular queue is already empty
then don't block.
Fixes: ce4af14d94aa ('iw_cxgb4: add queue drain functions')
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp
port map daemon. But iw_cxgb3 did not initialize this field which
causes intermittent registration failures based on the contents of the
uninitialized memory.
Fixes: c1340e8aa6 ("iw_cxgb3: support for iWARP port mapping")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The IWCM uses ibdev.iwcm->ifname for registration with the iwarp
port map daemon. But iw_cxgb4 did not initialize this field which
causes intermittent registration failures based on the contents of the
uninitialized memory.
Fixes: 170003c894 ("iw_cxgb4: remove port mapper related code")
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The operating system driver can take advantage of the IOMMU to remove
the need for physically contiguous memory buffers.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When commit b554e14506 ("regulator: tps65917/palmas: Add bypass
ops for LDOs with bypass capability") introduced bypass capability
to palmas regulator, it went with the assumption that regulator
regmap helpers just check val against the bypass_mask.
Unfortunately, this ignored the explicit "on" and "off" values when
the register value is masked with bypass_mask in commit ca5d1b3524
("regulator: helpers: Modify helpers enabling multi-bit control").
With the recent commit dd1a571dae ("regulator: helpers: Ensure
bypass register field matches ON value"), this issue gets highlighted
and fails tps65917/palmas based platforms which need regulators/ldos
that have bypass capability.
Introduce the bypass_on value appropriately for tps65917/palmas
regulator.
Fixes: b554e14506 ("regulator: tps65917/palmas: Add bypass ops for LDOs with bypass capability")
Cc: Keerthy <j-keerthy@ti.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
This clock is required for the GPU to operate.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The drain_rq function expects a normal receive qp to drain. A qp can
only have either a normal rq or an srq. If there is an srq, there
is no rq to drain. Until the API supports draining SRQs, simply
skip draining the rq when the qp has an srq attached.
Fixes: 765d67748b ("IB: new common API for draining queues")
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
GM20B's definition is mostly similar to GK20A's, but requires an
additional clock.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GK20A can optionally make use of an IOMMU.
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The correct compatible name is "nvidia,gk20a".
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The bits in the ARIZONA_CLOCK_CONTROL register only respond to writes of
a '1', a write of '0' is ignored. So there's no need to use update_bits.
We can do a simple write to set bits.
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Propagate the error instead.
Cc: David Ahern <dsahern@gmail.com>
Cc: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-z6erjg35d1gekevwujoa0223@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If the PF driver reports proper support, allow the PF driver to
configure RSS on the behalf of the VF driver. This will allow for RSS
support on future hardware without changes to the VF driver.
Unfortunately, the old RSS code still needs to stay as the driver needs
to be compatible with PF drivers that don't support this interface. But
this change still simplifies the data structures a bunch and makes this
code simpler to read and maintain.
Change-ID: I0375aad40788ecdc0cb24d5cfeccf07804e69771
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To add a little flexibility to the nvmupdate facility, this code adds the
ability to specify an AQ event opcode to wait on after the Exec_AQ request.
Change-ID: Iddbfd63c3de8df3edb9d3e90678b08989bc4946e
Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Introduced in commit 4babf2c5ef ("x86: wire up preadv2 and pwritev2").
This will make 'perf trace' aware of them.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-vojoylgce2cetsy36446s5ny@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf is not able to register probe in kernel module when dwarf supprt
is not there(and so it goes for symtab). Perf passes full path of
module where only module name is required which is causing the problem.
This patch fixes this issue.
Before applying patch:
$ dpkg -s libdw-dev
dpkg-query: package 'libdw-dev' is not installed and no information is...
$ sudo ./perf probe -m /linux/samples/kprobes/kprobe_example.ko kprobe_init
Added new event:
probe:kprobe_init (on kprobe_init in /linux/samples/kprobes/kprobe_example.ko)
You can now use it in all perf tools, such as:
perf record -e probe:kprobe_init -aR sleep 1
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/kprobe_init /linux/samples/kprobes/kprobe_example.ko:kprobe_init
$ sudo ./perf record -a -e probe:kprobe_init
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data ]
$ sudo ./perf script # No output here
After applying patch:
$ sudo ./perf probe -m /linux/samples/kprobes/kprobe_example.ko kprobe_init
Added new event:
probe:kprobe_init (on kprobe_init in kprobe_example)
You can now use it in all perf tools, such as:
perf record -e probe:kprobe_init -aR sleep 1
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/kprobe_init kprobe_example:kprobe_init
$ sudo ./perf record -a -e probe:kprobe_init
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.105 MB perf.data (2 samples) ]
$ sudo ./perf script
insmod 13990 [002] 5961.216833: probe:kprobe_init: ...
insmod 13995 [002] 5962.889384: probe:kprobe_init: ...
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1461680741-12517-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf can add a probe on kernel module which has not been loaded yet.
The current implementation finds the module name from path. But if the
filename is different from the actual module name then perf fails to
register a probe while loading module because of mismatch in the names.
For example, samples/kobject/kobject-example.ko is loaded as
kobject_example.
Before applying patch:
$ sudo ./perf probe -m /linux/samples/kobject/kobject-example.ko foo_show
Added new event:
probe:foo_show (on foo_show in kobject-example)
You can now use it in all perf tools, such as:
perf record -e probe:foo_show -aR sleep 1
$ cat /sys/kernel/debug/tracing/kprobe_events
p:probe/foo_show kobject-example:foo_show
$ insmod kobject-example.ko
$ lsmod
Module Size Used by
kobject_example 16384 0
Generate read to /sys/kernel/kobject_example/foo while recording data
with below command
$ sudo ./perf record -e probe:foo_show -a
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.093 MB perf.data ]
$./perf report --stdio -F overhead,comm,dso,sym
Error:
The perf.data.old file has no samples!
After applying patch:
$ sudo ./perf probe -m /linux/samples/kobject/kobject-example.ko foo_show
Added new event:
probe:foo_show (on foo_show in kobject_example)
You can now use it in all perf tools, such as:
perf record -e probe:foo_show -aR sleep 1
$ sudo cat /sys/kernel/debug/tracing/kprobe_events
p:probe/foo_show kobject_example:foo_show
$ insmod kobject-example.ko
$ lsmod
Module Size Used by
kobject_example 16384 0
Generate read to /sys/kernel/kobject_example/foo while recording data
with below command
$ sudo ./perf record -e probe:foo_show -a
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.097 MB perf.data (8 samples) ]
$ sudo ./perf report --stdio -F overhead,comm,dso,sym
...
# Samples: 8 of event 'probe:foo_show'
# Event count (approx.): 8
#
# Overhead Command Shared Object Symbol
# ........ ....... ................. ............
#
100.00% cat [kobject_example] [k] foo_show
Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1461680741-12517-2-git-send-email-ravi.bangoria@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We get notifications for threads that gets created while we're tracing,
but for preexisting threads we may end not having synthesized them, like
when tracing a 'perf trace' session that will use '--pid' to trace some
other thread.
And besides we should probably stop synthesizing those records and
instead read thread information in a lazy way, i.e. just when we need,
like done in this patch:
Now the 'pid_t' argument in 'perf_event_open' gets translated to a COMM:
# perf trace -e perf_event_open perf stat -e cycles -p 31601
0.027 ( 0.027 ms): perf/23393 perf_event_open(attr_uptr: 0x2fdd0d8, pid: 31601 (abrt-dump-journ), cpu: -1, group_fd: -1, flags: FD_CLOEXEC)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
= 3
^C
And in other syscalls containing pid_t without thread->comm_set at the
time of the formatting.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ioeps6dlwst17d6oozc9shtk@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Will be used for lazy comm loading in 'perf trace'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-7ogbkuoka1y2qsmcckqxvl5m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To read things like /proc/self/comm.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-ztpkbmseidt0hq2psr46o0h9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Leave it alone so that it ends up assigned to SCA_PID via its type,
'pid_t', that will look up the pid on the machine thread rb_tree and
possibly find its COMM.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r7dujgmhtxxfajuunpt1bkuo@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To reduce the size of builtin-trace.c.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8r3gmymyn3r0ynt4yuzspp9g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Set kprobe group name as "probe" if it is not given.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160426090413.11891.95640.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since other methods return 0 if succeeded (or filedesc), let
probe_file__add_event() return 0 instead of the length of written bytes.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160426090303.11891.18232.stgit@devbox
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As a utility function, add lsdir() which reads given directory and store
entry name into a strlist. lsdir accepts a filter function so that user
can filter out unneeded entries.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160426090242.11891.79014.stgit@devbox
[ Do not use the 'dirname' it is used in some distros ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Nicolas Dichtel says:
====================
netlink: align attributes when needed (patchset #3)
This is the continuation (series #3) of the work done to align netlink
attributes when these attributes contain some 64-bit fields.
It's the last patchset from what I've seen.
The last user of nla_put_u64() is block/drbd. This module does not use
standard netlink API (see all the stuff in include/linux/genl_magic_struct.h
and include/linux/genl_magic_func.h). I didn't modify it because it's seems
hard to do it whithout testing and fully understanding the context (for
example, why include/linux/drbd_genl.h is not part of uapi?).
Any thoughts?
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I also fix commit 8b32ab9e6ef1: use nla_total_size_64bit() for
OVS_FLOW_ATTR_USED in ovs_flow_cmd_msg_size().
Fixes: 8b32ab9e6ef1 ("ovs: use nla_put_u64_64bit()")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I also fix the value of INET_DIAG_MAX. It's wrong since commit 8f840e47f1
which is only in net-next right now, thus I didn't make a separate patch.
Fixes: 8f840e47f1 ("sctp: add the sctp_diag.c file")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was a simple idea -- save IPv6 configured addresses on a link down
so that IPv6 behaves similar to IPv4. As always the devil is in the
details and the IPv6 stack as too many behavioral differences from IPv4
making the simple idea more complicated than it needs to be.
The current implementation for keeping IPv6 addresses can panic or spit
out a warning in one of many paths:
1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in
rt6_fill_node while handling a route dump request.
2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in
fib6_del
3. Panic in fib6_purge_rt because rt6i_ref count is not 1.
The root cause of all these is references related to the host route for
an address that is retained.
So, this patch deletes the host route every time the ifdown loop runs.
Since the host route is deleted and will be re-generated an up there is
no longer a need for the l3mdev fix up. On the 'admin up' side move
addrconf_permanent_addr into the NETDEV_UP event handling so that it
runs only once versus on UP and CHANGE events.
All of the current panics and warnings appear to be related to
addresses on the loopback device, but given the catastrophic nature when
a bug is triggered this patch takes the conservative approach and evicts
all host routes rather than trying to determine when it can be re-used
and when it can not. That can be a later optimizaton if desired.
Signed-off-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This reverts commit 841645b5f2.
Ok, this puts the feature back. I've decided to apply David A.'s
bug fix and run with that rather than make everyone wait another
whole release for this feature.
Signed-off-by: David S. Miller <davem@davemloft.net>
Initialize the dma_slave_config for PCM DMA transfers,
instead of leaving it uninitialized. Keeps previous data on
the stack from giving us invalid values in uninitialized
members of the config structure.
Signed-off-by: Jim Lodes <jim.lodes@garmin.com>
Signed-off-by: J.D. Schroeder <jay.schroeder@garmin.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Reviewed-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
