Here are the changes to enable reader tdm mode:
- When TDM_ENABLE is set to 1, the i2s format should be automatically
configured. Unfortunately this is not the case (HW bug). Then, we shall
force DATA_SIZE setting.
- Compute the transfer size for tdm mode: transfer size = user frame size
- Manage tdm slots configuration given in DT.
- Refine the hw param (channels & format) according to tdm slot config.
Signed-off-by: Moise Gergaud <moise.gergaud@st.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
here are the changes to enable player tdm mode:
- When TDM_ENABLE is set to 1, the i2s format should be automatically
configured. Unfortunately this is not the case (HW bug). Then, we shall
force DATA_SIZE setting.
- Compute the transfer size for tdm mode: transfer size = user frame size
- Manage tdm slots configuration given in DT.
- Don't use mclk-fs when unip in tdm mode; use tdm slot config to compute
frame size and to set mclk rate.
- Refine the hw param (channels & format) according to tdm slot config.
Signed-off-by: Moise Gergaud <moise.gergaud@st.com>
Acked-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
While building with W=1 we were getting the warning:
drivers/staging/lustre/lustre/obdclass/cl_object.c:1056:16:
warning: old-style function definition
struct lu_env *cl_env_percpu_get()
^
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Acked-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Let all SPI masters ignore their children: when it comes
to power management: SPI children have no business doing
keeping their parents awake: they are completely autonomous
devices that just use their parent to talk, and the latter
usecase must be power managed by the host itself on a
per-message basis.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix 'no effect' issues found by Coverity version 6.5.1:
Unsigned compared against 0 (NO_EFFECT)
This greater-than-or-equal-to-zero comparison of an unsigned value
is always true.
Remove useless cast.
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3907
Reviewed-on: http://review.whamcloud.com/7166
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This will be used by HSM release to get data version and drop all
caching pages from all clients, before sending IT_RELEASE close
REQ to MDT.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3647
Reviewed-on: http://review.whamcloud.com/6794
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In error handling path of ll_lease_open(), och has already been
freed in ll_close_inode_openhandle() so the sequence of cancel
open lock and close open handle need adjusting.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3647
Reviewed-on: http://review.whamcloud.com/7346
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix 'NULL pointer dereference' defects found by Coverity version
6.5.0:
Dereference after null check (FORWARD_NULL)
For instance, Passing null pointer to a function which dereferences
it.
Dereference before null check (REVERSE_INULL)
Null-checking variable suggests that it may be null, but it has
already been dereferenced on all paths leading to the check.
Dereference null return value (NULL_RETURNS)
Signed-off-by: Sebastien Buisson <sbuisson@ddn.com>
Signed-off-by: James Nunez <james.a.nunez@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3042
Reviewed-on: http://review.whamcloud.com/5868
Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Create a special flag for the last rename event.
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3718
Reviewed-on: http://review.whamcloud.com/7260
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As this lock can be a bottleneck, clarifying why it is needed may be
helpful to those working on client performance.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3443
Reviewed-on: http://review.whamcloud.com/6593
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Keith Mannthey <keith.mannthey@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In client_common_fill_super() proc entries are created before
before cl_sb_init() and therefore lu_site is not allocated resulting
in client crash when tried reading lu_site stats.
Delaying creation of proc entries after creation of all required data
structures fixed the problem.
Signed-off-by: Gaurav Mahajan <gmahajan@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-2941
Reviewed-on: http://review.whamcloud.com/6852
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The introduction of lmm_layout_gen makes the assumption that
lmm_objects is present after lmm_stripe_count incorrect.
Fixed this to get the correct address of lmm_objects when lmmk is cast
to lov_mds_md_v1.
Signed-off-by: Swapnil Pimpale <spimpale@ddn.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3162
Reviewed-on: http://review.whamcloud.com/7258
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If an error occurs when initializing a HSM request, in
ll_ioc_copy_start(), the PROGRESS message, sent to coordinator, should
carry the error code but also HP_FLAG_COMPLETED to mark the request as
finished (with error). If not, the Coordinator will ignore this
message and consider the request is still running.
Signed-off-by: Aurelien Degremont <aurelien.degremont@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3685
Reviewed-on: http://review.whamcloud.com/7265
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
rename hai_zero() to hai_first(). Use a better name for hai helper
Signed-off-by: JC Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3709
Reviewed-on: http://review.whamcloud.com/7254
Reviewed-by: Jinshan Xiong <jinshan.xiong@intel.com>
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The lu_ref was not being decremented when releasing the
lease handle.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3647
Reviewed-on: http://review.whamcloud.com/7243
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of a using a growing case statement to handle
more debugging options create a array to map debug
flags to string names.
Signed-off-by: Jinshan Xiong <jinshan.xiong@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3647
Reviewed-on: http://review.whamcloud.com/7243
Reviewed-by: John L. Hammond <john.hammond@intel.com>
Reviewed-by: jacques-Charles Lafoucriere <jacques-charles.lafoucriere@cea.fr>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ll_lov_setea(), setting MDS_OPEN_HAS_OBJS to an int flags will
result in the flags being overflowed.
Signed-off-by: Niu Yawei <yawei.niu@intel.com>
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-3744
Reviewed-on: http://review.whamcloud.com/7312
Reviewed-by: Emoly Liu <emoly.liu@intel.com>
Reviewed-by: Jian Yu <jian.yu@intel.com>
Reviewed-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: James Simmons <jsimmons@infradead.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This fixes all checkpatch form of this from the Lustre tree:
CHECK: braces {} should be used on all arms of this statement
Signed-off-by: Oleg Drokin <green@linuxhacker.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extending the configure streams interface with CSI params.
Getting CSI frequency data form configure streams response.
* num_lanes - Number of CSI data lanes
* clk_freq - CSI clock frequency in Hz
* lines_per_second - Total number of lines in a second of
transmission (blanking included)
From the AP side we need to know for the CSI speed
configuration. This information is needed for dynamically
bandwidth calculations.
NOTE: Change should be along merged with corresponding
interface change in kernel:
"camera: Extend the configure streams
interface with CSI params"
Signed-off-by: Evgeniy Borisov <eborisov@mm-sol.com>
Reviewed-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
The new devlink.h in uapi was not being installed by
make headers_install
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the following sparse build warning:
mach-rockchip/platsmp.c:68:43: Using plain integer as NULL pointer
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Check return value of syscon_node_to_regmap for
rockchip_pm_domain_probe. If err value is returned, probe
procedure should abort.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the ipg (bus) clock for the TCON modules (Timing Controller). This
module is required by the new DCU DRM driver, since the display signals
pass through TCON.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Similar to an earlier fix for the SAI clocks, the DCU clock hierarchy
mixes the bus clock with the display controllers pixel clock. Tests
have shown that the gates in CCM_CCGR3/9 registers do not control
the DCU pixel clock, but only the register access clock (bus clock).
Fix this by defining the parent clock of VF610_CLK_DCUx to be the bus
clock (ipg_bus).
Since the clock has not been used far, there are no further changes
needed.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit 3525e0aac9.
The DMA transfer for RX buffer was not handled correctly in this change.
The actual transfer length for DMA RX can be less than xfer->len in the
specific condition and the last words will be filled after the DMA
completion, but the commit doesn't consider it and the dmaengine is
started with rx_sg mapped by spi core.
The solution for this at least requires more lines than this commit
has inserted. So revert it for now.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The fprintf_sym() and fprintf_callchain() methods now allow users to
change the existing behaviour of showing "[unknown]" as the name of
unresolved symbols to instead show "[0x123456]", i.e. its address.
The current patch doesn't change tools to use this facility, the results
from 'perf trace' and 'perf script' cotinue like:
70.109 ( 0.001 ms): qemu-system-x8/10153 poll(ufds: 0x7f2d93ffe870, nfds: 1) = 0 Timeout
[unknown] (/usr/lib64/libc-2.22.so)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
[unknown] (/usr/lib64/libspice-server.so.1.10.0)
start_thread+0xca (/usr/lib64/libpthread-2.22.so)
__clone+0x6d (/usr/lib64/libc-2.22.so)
The next patch will make 'perf trace' use the new formatting.
Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fja1ods5vqpg42mdz09xcz3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We don't need the callchains at the syscall enter tracepoint, just when
finishing it at syscall exit, so reduce the overhead by asking for
callchains just at syscall exit.
Suggested-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-fja1ods5vqpg42mdz09xcz3r@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The rename is for consistency with the parameter name.
Make it public for fine grained control of which evsels should have
callchains enabled, like, for instance, will be done in the next
changesets in 'perf trace', to enable callchains just on the
"raw_syscalls:sys_exit" tracepoint.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-og8vup111rn357g4yagus3ao@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For fiddling with sample_type fields in all evsels in an evlist.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dg6yavctt0hzl2tsgfb43qsr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead receive a callchain_param pointer to configure callchain
aspects, not doing so if NULL is passed.
This will allow fine grained control over which evsels in an evlist
gets callchains enabled.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-2mupip6khc92mh5x4nw9to82@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In 'perf trace' we're just interested in printing callchains, and we
don't want to use the symbol_conf.use_callchain, so move the callchain
part to a new method.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-kcn3romzivcpxb3u75s9nz33@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As it receives a FILE, and its more than just the IP, which can even be
requested not to be printed.
For consistency with other similar methods in tools/perf/, name it as
perf_evsel__fprintf_sym() and make it return the number of bytes
printed, just like 'fprintf(3)'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-84gawlqa3lhk63nf0t9vnqnn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now, one can print the call chain for every encountered sys_exit event,
e.g.:
$ perf trace -e nanosleep --call-graph dwarf path/to/ex_sleep
1005.757 (1000.090 ms): ex_sleep/13167 nanosleep(...) = 0
syscall_slow_exit_work ([kernel.kallsyms])
syscall_return_slowpath ([kernel.kallsyms])
int_ret_from_sys_call ([kernel.kallsyms])
__nanosleep (/usr/lib/libc-2.23.so)
[unknown] (/usr/lib/libQt5Core.so.5.6.0)
QThread::sleep (/usr/lib/libQt5Core.so.5.6.0)
main (path/to/ex_sleep)
__libc_start_main (/usr/lib/libc-2.23.so)
_start (path/to/ex_sleep)
Note that it is advised to increase the number of mmap pages to prevent
event losses when using this new feature. Often, adding `-m 10M` to the
`perf trace` invocation is enough.
This feature is also available in strace when built with libunwind via
`strace -k`. Performance wise, this solution is much better:
$ time find path/to/linux &> /dev/null
real 0m0.051s
user 0m0.013s
sys 0m0.037s
$ time perf trace -m 800M --call-graph dwarf find path/to/linux &> /dev/null
real 0m2.624s
user 0m1.203s
sys 0m1.333s
$ time strace -k find path/to/linux &> /dev/null
real 0m35.398s
user 0m10.403s
sys 0m23.173s
Note that it is currently not possible to configure the print output.
Adding such a feature, similar to what is available in `perf script` via
its `--fields` knob can be added later on.
Signed-off-by: Milian Wolff <milian.wolff@kdab.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
LPU-Reference: 1460115255-17648-1-git-send-email-milian.wolff@kdab.com
[ Split from a larger patch, do not print the IP, left align,
remove dup call symbol__init(), added man page entry ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For callchains, etc where we want it to align just below the syscall
name, for instance, in 'perf trace'
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uk9ekchd67651c625ltaur5y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
