We cannot use strcpy() to write to a const char * location. This is
causing a 'BUG: unable to handle kernel paging request' error at boot
when using the cht-bsw-rt5645 driver.
With this patch we also fix a wrong indexing in the driver where the
codec_name of the wrong dai_link is being overwritten.
Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable is_ver1 is always true and so OSD_CAP_LEN can never be
used.
Reported by Coverity.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: Boaz harrosh <ooo@elecrozaur.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To improve I2S flow, this patch removes soft reset and adds second
I2S clock to use.
Signed-off-by: PC Liao <pc.liao@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
parport_claim() can fail and we should be checking if we were able to
claim the port.
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Let's compare the degrees from clk_set_rate with
clk->core->phase. If the requested degrees is already
there, skip the following steps.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
[sboyd@codeaurora.org: s/drgrees/degrees/ in commit text]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The spi_lp8841_rtc_probe() function misses an initialization of the
return code when it fails to get its memory resource, as gcc notices:
drivers/spi/spi-lp8841-rtc.c: In function 'spi_lp8841_rtc_probe':
drivers/spi/spi-lp8841-rtc.c:239:9: error: 'ret' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This changes the code to propagate the error from devm_ioremap_resource().
Fixes: 7ecbfff671 ("spi: master driver to enable RTC on ICPDAS LP-8841")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Sergei Ianovich <ynvich@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
As pointed out by Zhangfei Gao, the sspa_div variable in
brownstone_wm8994_hw_params() is completely unused, so as a cleanup
following a prior patch, this removes both the variable and the division.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Headphone needs enough delay time before unmuting for avoiding pop sound.
We extend the delay time to make sure headphone doesn't pop.
Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When playing audio through headphone, headphone makes pop noise if system
resumes from S3 to S0. We modify the sequence of writing register for
avoiding pop sound.
Signed-off-by: John Lin <john.lin@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver tries to be clever by only setting up DMA channels when
the corresponding sg tables are non NULL. The sg tables are embedded
structs in struct spi_transfer, so they are guaranteed to be non NULL
which makes the if(tx)/if(rx) tests completely bogus. The driver even
sets the SPI_MASTER_MUST_RX / SPI_MASTER_MUST_TX flags which makes sure
the sg tables are not only present but also non empty.
Drop the tests and make the DMA path easier to follow.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
Now that the config function knows whether we are doing DMA or not we
can do the necessary register setup in the config function and no longer
have to do this in the trigger function. With this the trigger function
becomes a no-op for DMA, so instead of testing if we are doing DMA or
not in the trigger function we simply no longer call it in the DMA case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The watermark levels in the DMA register are write only, the driver
should never have to read them back from the hardware. Replace the
current _MASK and _OFFSET defines with defines taking the watermark
level directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts patch 1476253cef (spi: imx: fix ecspi mode setup)
The patch tried to fix something by clearing bits in the cfg variable,
but cfg is initialized to zero on function entry. There are no bits to
clear.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
DMA transfer for SPI was limited to up to 8 bits word size until now.
Sync in SPI burst size and DMA bus width is necessary to correctly
support 16 and 32 BPW.
Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
There's no need for an extra dma_is_inited variable when we can
equally well check for the existence of a DMA channel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
When the MX51_ECSPI_DMA is configured we control every single bit
of the register, so there's no need to read/modify/write it. Instead
just write the value we want to have in the register. Also, drop
unnecessary check if we are actually doing DMA. The values written
to the register have no effect in PIO mode and value written there
during the last DMA transfer is still in the register, so we can
equally well always write a value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
The SoC specific config function does not know if DMA will be used or
not. This information will be useful to configure the SPI controller
correctly for DMA in following patches, so initialize the usedma
variable before calling into the SoC specific config function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
After a change to the snd_jack structure, the 'name' member
is no longer available in all configurations, which results in a
build failure in the tracing code:
include/trace/events/asoc.h: In function 'trace_event_raw_event_snd_soc_jack_report':
include/trace/events/asoc.h:240:32: error: 'struct snd_jack' has no member named 'name'
The name field is normally initialized from the card shortname and
the jack "id" field:
snprintf(jack->name, sizeof(jack->name), "%s %s",
card->shortname, jack->id);
This changes the tracing output to just contain the 'id' by
itself, which slightly changes the output format but avoids the
link error and is hopefully still enough to see what is going on.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: fe0d128c57 ("ALSA: jack: Allow building the jack layer without input device")
Signed-off-by: Mark Brown <broonie@kernel.org>
These fields are never used and not required at all, remove them.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Smatch complains that we might reach the end of this loop without
finding what we're looking for leading to a buffer overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
1. Inode mapping tree can index page in range of [0, ULONG_MAX], however,
in some places, f2fs only search or iterate page in ragne of [0, LONG_MAX],
result in miss hitting in page cache.
2. filemap_fdatawait_range accepts range parameters in unit of bytes, so
the max range it covers should be [0, LLONG_MAX], if we use [0, LONG_MAX]
as range for waiting on writeback, big number of pages will not be covered.
This patch corrects above two issues.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch updates gpio-keys node that supports power-off for
X-Gene v2 Merlin board to adapt with new changes in xgene-gpio-sb
driver (to support configuring some GPIO pins as interrupt pins).
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
xgene-gpio-sb driver now supports configuring some GPIO pins
as interrupt pins. This patch adds the required fields for GPIO
standby controller DT node of X-Gene v2 platform to work with
this new driver change.
Signed-off-by: Quan Nguyen <qnguyen@apm.com>
Signed-off-by: Duc Dang <dhdang@apm.com>
This patch updates gpio-keys node that supports power-off for
X-Gene v1 Mustang board to adapt with new changes in xgene-gpio-sb
driver (to support configuring some GPIO pins as interrupt pins).
Signed-off-by: Duc Dang <dhdang@apm.com>
During the initial conversion to the newly introduced combined fractional
dividers+muxes the rk3368 clocks were left out, so convert them now.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Currently, we are adding 0.5 to the average to round the average.
But we are using the remainder to calculate the decimal, so we do not
need to round the average.
In addition, use a u64 type for the remainder to avoid overflow
that might happen when stats->sum value is too big,
usually for requests per seconds and the throughput.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Throughput and requests per second calculations are broken for
asynchronous request.
Instead of calculate the throughput for each iteration,
calculate it once at the end of the test.
In addition, update every seconds the min and the max
for throughput and requests per second.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Currently, in case the case of error, statistics are updated for
asynchronous but not for an asynchronous operation.
Do not update the statistics in the case of error.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
For the async ping transfer, statistics are counted twice,
once after the after the gb_loopback_async_operation() and
once in the callback.
Only keep the one in the callback.
Signed-off-by: Alexandre Bailon <abailon@baylibre.com>
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Reviewed-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
This patch adds the needed clocks for rk3228 tsadc.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
lights can never be NULL at that point since lights_count must be different than
zero, and we need only to validate the light_id.
Reported-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
There are four clocks that vop module would need to operate:
DCLK_VOP, HCLK_VOP, SCLK_VOP, ACLK_VOP,
Signed-off-by: Yakir Yang <ykk@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This patch adds 'SCLK_TSADC' and 'PCLK_TSADC' id found on rk3228 SoCs.
That will be needed by TSADC controller.
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
'max_discard_sectors' is in sectors, while 'stripe' is in bytes.
This fixes the problem where DISCARD would get disabled on some larger
RAID5 configurations (6 or more drives in my testing), while it worked
as expected with smaller configurations.
Fixes: 620125f2bf ("MD: raid5 trim support")
Cc: stable@vger.kernel.org v3.7+
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Shaohua Li <shli@fb.com>
This patch enables Exynos thermal and related configs for the
TMU found on Exynos7 SoC. This also enables thermal emulation
mode to test trip points.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
HUB3613 configuration, either disable (Standby mode) or enable (HUB mode)
is related to APB. So it makes perfect sense to put both of them
together in one function.
HUB3613 enable happens only at one place, in hub_conf_delayed_work() fn,
but disable is initiated from multiple places.
Move all calls to usb3613_hub_mode_ctrl(false) to apb_poweroff().
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
On first wake/detect pulse, everything works fine, as APB would be
in poweroff state initially.
But on subsequent wake/detect pulses, where APB is already in active
state, internal function just returns doing nothing, as it finds that
device is already in active state.
So the solution would be to make sure that, whenever execution reaches
to coldboot, make sure we power cycle it. Power off first, before
powering on.
Interrupt handler takes care of ignoring < 30msec pulses, so we should
be safe here to power cycle APB.
Testing Done: Testd on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Add support for operations with short responses.
So far we have assumed that the initiator of an operation always knows
the exact size of the expected response. This is however not always the
case and we've worked around this limitation in a couple of places by,
for example, first requesting the size of a resource before fetching the
actual data.
To avoid such workarounds and simplify our protocols, add a
short-response flag that can be set when allocating an operation. When
this flag is set on an operation, core will accept a response that is
shorter than the size of the (pre-allocated) response payload buffer.
For now, we update the response-message payload_size field to reflect
the actual length of the response received.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
As a preparatory clean up, add a temporary variable to point to the
response message header.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Johan Hovold <johan@hovoldconsulting.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
In poweroff() fn, we are shutting down SVC, so disable interrupt
as well.
Testing Done: Tested on DB3.5 platform.
Signed-off-by: Vaibhav Hiremath <vaibhav.hiremath@linaro.org>
Reviewed-by: Michael Scott <michael.scott@linaro.org>
Tested-by: Michael Scott <michael.scott@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
