When INIT/SIPI sequence is sent to VCPU which before that
was in use by OS, VMRUN might fail with:
KVM: entry failed, hardware error 0xffffffff
EAX=00000000 EBX=00000000 ECX=00000000 EDX=000006d3
ESI=00000000 EDI=00000000 EBP=00000000 ESP=00000000
EIP=00000000 EFL=00000002 [-------] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0000 00000000 0000ffff 00009300
CS =9a00 0009a000 0000ffff 00009a00
[...]
CR0=60000010 CR2=b6f3e000 CR3=01942000 CR4=000007e0
[...]
EFER=0000000000000000
with corresponding SVM error:
KVM: FAILED VMRUN WITH VMCB:
[...]
cpl: 0 efer: 0000000000001000
cr0: 0000000080010010 cr2: 00007fd7fe85bf90
cr3: 0000000187d0c000 cr4: 0000000000000020
[...]
What happens is that VCPU state right after offlinig:
CR0: 0x80050033 EFER: 0xd01 CR4: 0x7e0
-> long mode with CR3 pointing to longmode page tables
and when VCPU gets INIT/SIPI following transition happens
CR0: 0 -> 0x60000010 EFER: 0x0 CR4: 0x7e0
-> paging disabled with stale CR3
However SVM under the hood puts VCPU in Paged Real Mode*
which effectively translates CR0 0x60000010 -> 80010010 after
svm_vcpu_reset()
-> init_vmcb()
-> kvm_set_cr0()
-> svm_set_cr0()
but from kvm_set_cr0() perspective CR0: 0 -> 0x60000010
only caching bits are changed and
commit d81135a57a
("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed")'
regressed svm_vcpu_reset() which relied on MMU being reset.
As result VMRUN after svm_vcpu_reset() tries to run
VCPU in Paged Real Mode with stale MMU context (longmode page tables),
which causes some AMD CPUs** to bail out with VMEXIT_INVALID.
Fix issue by unconditionally resetting MMU context
at init_vmcb() time.
* AMD64 Architecture Programmer’s Manual,
Volume 2: System Programming, rev: 3.25
15.19 Paged Real Mode
** Opteron 1216
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Fixes: d81135a57a
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Atmel SAMA5 SoCs are also supported through mach-at91.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Enable D8 led as now the pioD is available. D8 is the power led and is on by
default.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: split the patch in 2]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
As the EK board comes with a PDA 7" screen, add the touch buttons
and touchscreen for it.
Signed-off-by: Patrice Vilchez <patrice.vilchez@atmel.com>
[nicolas.ferre@atmel.com: add commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
As PMIC act8865 can disturb communication on i2c1, and as it should be setup
correctly then its i2c interface disabled by bootloader, we simply disregard it
in DT.
Acked-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
No device connect to i2c1, so remove it to keep it as disabled.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Commit 2ee507c472 ("sched: Add function single_task_running to let a task
check if it is the only task running on a cpu") referenced the current
runqueue with the smp_processor_id. When CONFIG_DEBUG_PREEMPT is enabled,
that is only allowed if preemption is disabled or the currrent task is
bound to the local cpu (e.g. kernel worker).
With commit f781951299 ("kvm: add halt_poll_ns module parameter") KVM
calls single_task_running. If CONFIG_DEBUG_PREEMPT is enabled that
generates a lot of kernel messages.
To avoid adding preemption in that cases, as it would limit the usefulness,
we change single_task_running to access directly the cpu local runqueue.
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Fixes: 2ee507c472
Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Not the first time! not the last time?
There is a possibility to use gcc 5's -Wbool-compare to try and compare
(reg) in those macros to a constant and gcc will warn that the
comparison between a boolean expression and a constant is always either
true or false. Maybe.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: Damien Lespiau <damien.lespiau@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
We allocate memory for LVDS modes while parsing the VBT at startup, but
never free this memory when the driver is unloaded, causing a small
leak.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use the new debug info in the intel_crtc struct in these functions
rather than passing them as args.
v2: move min/max assignment back above first trace call (Ville)
use scanline from crtc->debug rather than fetching a new one (Ville)
v3: fix up trace_i915_pipe_update_end, needs end scanline (Ville)
Requested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
As discussed on linux-arch all architectures should wire up the separate
system calls that are hidden behind the socketcall multiplexer system call.
It's just a couple more system calls and gives us a very small performance
improvement.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
A couple of compat wrapper functions are simply trampolines to the real
system call. This happened because the compat wrapper defines will only
sign and zero extend system call parameters which are of different size
on s390/s390x (longs and pointers).
All other parameters will be correctly sign and zero extended by the
normal system call wrappers.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Add notrace to the compat wrapper define to disable tracing of compat
wrapper functions. These are supposed to be very small and more or less
just a trampoline to the real system call.
Also fix indentation.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
This patch adds ratelimited version of the BT_ERR macro.
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This new test checks that all x86 registers are preserved across
32-bit syscalls. It tests syscalls through VDSO (if available)
and through INT 0x80, normally and under ptrace.
If kernel is a 64-bit one, high registers (r8..r15) are poisoned
before the syscall is called and are checked afterwards.
They must be either preserved, or cleared to zero (but r11 is
special); r12..15 must be preserved for INT 0x80.
EFLAGS is checked for changes too, but change there is not
considered to be a bug (paravirt kernels do not preserve
arithmetic flags).
Run-tested on 64-bit kernel:
$ ./test_syscall_vdso_32
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by
SYSRET insn [OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[OK] R8..R15 did not leak kernel data
On 32-bit paravirt kernel:
$ ./test_syscall_vdso_32
[NOTE] Not a 64-bit kernel, won't test R8..R15 leaks
[RUN] Executing 6-argument 32-bit syscall via VDSO
[WARN] Flags before=0000000000200ed7 id 0 00 o d i s z 0 a 0 p 1 c
[WARN] Flags after=0000000000200246 id 0 00 i z 0 0 p 1
[WARN] Flags change=0000000000000c91 0 00 o d s 0 a 0 0 c
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
[RUN] Running tests under ptrace
[RUN] Executing 6-argument 32-bit syscall via VDSO
[OK] Arguments are preserved across syscall
[RUN] Executing 6-argument 32-bit syscall via INT 80
[OK] Arguments are preserved across syscall
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
Acked-by: Andy Lutomirski <luto@amacapital.net>
Cc: Alexei Starovoitov <ast@plumgrid.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1442427809-2027-1-git-send-email-dvlasenk@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Current kernel support only one fw name with theoretically only one
fw version located in “firmware/htc_[9271|7010].fw”. Which is ok so far we
have only one fw version (1.3). After we realised new fw 1.4, we faced
compatibility problem which was decided to solve by firmware name and
location:
- new firmware is located now in
firmware/ath9k_htc/htc_[9271|7010]-1.4.0.fw
- old version 1.3 should be on old place, so old kernel have no issues
with it.
- new kernels including this patch should be able to try different
supported (min..max) fw version.
- new kernel should be able to support old fw location too. At least for
now.
At same time this patch will add new module option which should allow user
to play with development fw version without replacing stable one. If user
will set “ath9k_htc use_dev_fw=1” module will try to find
firmware/ath9k_htc/htc_[9271|7010]-1.dev.0.fw first and if it fails, use
stable version: for example...1.4.0.fw.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
If _Q_SLOW_VAL has been set, the vCPU state must have been vcpu_hashed.
The extra check at the end of __pv_queued_spin_unlock() is unnecessary
and can be removed.
Signed-off-by: Waiman Long <Waiman.Long@hpe.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Douglas Hatch <doug.hatch@hp.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Scott J Norton <scott.norton@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1441996658-62854-3-git-send-email-Waiman.Long@hpe.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
... by using acquire/release for ops around the lock->tail. As such,
weakly ordered archs can benefit from more relaxed use of barriers
when issuing atomics.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hpe.com>
Link: http://lkml.kernel.org/r/1442216244-4409-3-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
... trivial, but reads a little nicer when we name our
actual primitive 'lock'.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <Waiman.Long@hpe.com>
Link: http://lkml.kernel.org/r/1442216244-4409-1-git-send-email-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit deb27519bf ("perf/x86/intel: Fix LBR callstack issue caused
by FREEZE_LBRS_ON_PMI") leads to the following Smatch complaint:
warn: variable dereferenced before check 'cpuc->lbr_sel' (see line 154)
Fix the warning.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: deb27519bf ("perf/x86/intel: Fix LBR callstack issue caused by FREEZE_LBRS_ON_PMI")
Link: http://lkml.kernel.org/r/1442240047-48149-1-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The group_classify() function does not use the "env" parameter, so remove it.
Also unify code to always use group_classify() to calculate group's
load type.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1442314605-14838-1-git-send-email-leo.yan@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Macro LOAD_AVG_MAX is defined far away from the precompuated tables
for decay calculation in code; So explicitly comments for this.
Also fix one typo: s/LOAD_MAX_AVG/LOAD_AVG_MAX.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1442314657-14949-1-git-send-email-leo.yan@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Currently task_numa_work() scans up to numa_balancing_scan_size_mb worth
of memory per invocation, but only counts memory areas that have at
least one PTE that is still present and not marked for numa hint faulting.
It will skip over arbitarily large amounts of memory that are either
unused, full of swap ptes, or full of PTEs that were already marked
for NUMA hint faults but have not been faulted on yet.
This can cause excessive amounts of CPU use, due to there being
essentially no upper limit on the scan rate of very large processes
that are not yet in a phase where they are actively accessing old
memory pages (eg. they are still initializing their data).
Avoid that problem by placing an upper limit on the amount of virtual
memory that task_numa_work() scans in each invocation. This can be a
higher limit than "pages", to ensure the task still skips over unused
areas fairly quickly.
While we are here, also fix the "nr_pte_updates" logic, so it only
counts page ranges with ptes in them.
Reported-by: Andrea Arcangeli <aarcange@redhat.com>
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150911090027.4a7987bd@annuminas.surriel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Most of the policy-tests are done via the <class>_policy() helpers with
the notable exception of idle. A new wrapper for valid_policy() has also
been added to improve readability in set_load_weight().
This commit does not change the logical behavior of the scheduler core.
Signed-off-by: Henrik Austad <henrik@austad.us>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Link: http://lkml.kernel.org/r/1441810841-4756-1-git-send-email-henrik@austad.us
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are two races with the current code:
- Another event can join the group and compute a larger header_size
concurrently, if the smaller store wins we'll have an incorrect
header_size set.
- We compute the header_size after the event becomes active,
therefore its possible to use the size before its computed.
Remedy the first by moving the computation inside the ctx::mutex lock,
and the second by placing it _before_ perf_install_in_context().
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vince reported that its possible to overflow the various size fields
and get weird stuff if you stick too many events in a group.
Put a lid on this by requiring the fixed record size not exceed 16k.
This is still a fair amount of events (silly amount really) and leaves
plenty room for callchains and stack dwarves while also avoiding
overflowing the u16 variables.
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The exclusive_event_installable() stuff only works because its
exclusive with the grouping bits.
Rework the code such that there is a sane place to error out before we
go do things we cannot undo.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Stephane pointed out that the extrareg mask was one bit too short.
The bubble width field was truncated by one bit. Fix that here.
Also add some extra comments on the reserved bits inside the event
select code.
Reported-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1441835640-21347-3-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Skylake has a new FRONTEND_LATENCY PEBS event to accurately profile
frontend problems (like ITLB or decoding issues).
The new event is configured through a separate MSR, which selects
a range of sub events.
Define the extra MSR as a extra reg and export support for it
through sysfs. To avoid duplicating the existing
tables use a new function to add new entries to existing tables.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1435707205-6676-4-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The counter constraint for CYCLE_ACTIVITY.* on Broadwell covered
all CYCLE_ACTIVITY.* sub events, and forced them on counter 2.
But actually only one sub event (umask 8) needs to be on counter 2,
all others do not have any constraint.
Only force that subevent. This fixes groups with multiple
CYCLE_ACTIVITY.* events, for example:
% perf stat -x, -e '{cpu/event=0xa3,umask=0x6,cmask=6/,\
cpu/event=0xa2,umask=0x8/,\
cpu/event=0xa3,umask=0x4,cmask=4/,cpu/event=0xb1,umask=0x1,cmask=1/}' true
122150,,cpu/event=0xa3,umask=0x6,cmask=6/,846486,100.00
16483,,cpu/event=0xa2,umask=0x8/,846486,100.00
252280,,cpu/event=0xa3,umask=0x4,cmask=4/,846486,100.00
233604,,cpu/event=0xb1,umask=0x1,cmask=1/,846486,100.00
%
Without this patch the third result would be <unsupported>
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1442267222-16464-1-git-send-email-andi@firstfloor.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Sasha reports that his virtual machine tries to schedule the idle
thread since commit 6c37067e27 ("sched: Change the
sched_class::set_cpus_allowed() calling context").
Hit trace shows this happening from idle_thread_get()->init_idle(),
which is the _second_ init_idle() invocation on that task_struct, the
first being done through idle_init()->fork_idle(). (this code is
insane...)
Because we call init_idle() twice in a row, its ->sched_class ==
&idle_sched_class and ->on_rq = TASK_ON_RQ_QUEUED. This means
do_set_cpus_allowed() think we're queued and will call dequeue_task(),
which is implemented with BUG() for the idle class, seeing how
dequeueing the idle task is a daft thing.
Aside of the whole insanity of calling init_idle() _twice_, change the
code to call set_cpus_allowed_common() instead as this is 'obviously'
before the idle task gets ran etc..
Reported-by: Sasha Levin <sasha.levin@oracle.com>
Tested-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6c37067e27 ("sched: Change the sched_class::set_cpus_allowed() calling context")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
User visible:
- When handling perf_event_open() returning EBUSY and not being able to opendir
the procfs mount point we would tell the user that the oprofile daemon was
found by returning -1 on as the return for a bool function, oops, fix it,
found with Coccinelle (Peter Senna Tschudin).
- Fix per-pkg event reporting bug in 'perf stat' (Stephane Eranian)
Developer visible:
- Fix missing prototype for function provided when it isn't present in the
libelf present, fixing the build on RHEL/CentOS 5.1 systems, for instance
(Arnaldo Carvalho de Melo)
- Detect if the gcc and libnuma have the features needed to avoid requiring
the use of NO_LIBNUMA and/or NO_AUXTRACE to build on older systems
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=k6ND
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
User visible changes:
- When handling perf_event_open() returning EBUSY and not being able to opendir
the procfs mount point we would tell the user that the oprofile daemon was
found by returning -1 on as the return for a bool function, oops, fix it,
found with Coccinelle. (Peter Senna Tschudin).
- Fix per-pkg event reporting bug in 'perf stat'. (Stephane Eranian)
Developer visible changes:
- Fix missing prototype for function provided when it isn't present in the
libelf present, fixing the build on RHEL/CentOS 5.1 systems, for instance.
(Arnaldo Carvalho de Melo)
- Detect if the gcc and libnuma have the features needed to avoid requiring
the use of NO_LIBNUMA and/or NO_AUXTRACE to build on older systems.
(Arnaldo Carvalho de Melo)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Memory placement in sch_dsmark is silly : Better place mask/value
in the same cache line.
Also, we can embed small arrays in the first cache line and
remove a potential cache miss.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tracking idle time in bictcp_cwnd_event() is imprecise, as epoch_start
is normally set at ACK processing time, not at send time.
Doing a proper fix would need to add an additional state variable,
and does not seem worth the trouble, given CUBIC bug has been there
forever before Jana noticed it.
Let's simply not set epoch_start in the future, otherwise
bictcp_update() could overflow and CUBIC would again
grow cwnd too fast.
This was detected thanks to a packetdrill test Neal wrote that was flaky
before applying this fix.
Fixes: 30927520db ("tcp_cubic: better follow cubic curve after idle period")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Cc: Jana Iyengar <jri@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter reported off-by-one error of fjes at
http://www.mail-archive.com/netdev@vger.kernel.org/msg77520.html
Actually this is a bug.
ep_shm_info[epidx].{es_status, zone} should be update
inside for loop.
This patch fixes this bug.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
I got this automated message from <shahed.shaikh@qlogic.com> when submitting
a qlcnic patch:
> Shahed Shaikh is no longer with QLogic. If you require assistance please
> contact Ariel Elior Ariel.Elior@qlogic.com
There's no point in having a bouncing address in MAINTAINERS.
CC: Dept-GELinuxNICDev@qlogic.com
CC: Ariel Elior <Ariel.Elior@qlogic.com>
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc says:
====================
vxlan fixes
This fixes various issues with vxlan related to IPv6.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The callback for adding vxlan port can be called with the same port for
both IPv4 and IPv6. Do not disable the offloading when the same port for
both protocols is added and later one of them removed.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The callback for adding vxlan port can be called with the same port for both
IPv4 and IPv6. Do not disable the offloading if this occurs.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Acked-by: Sathya Perla <sathya.perla@avagotech.com>
Signed-off-by: David S. Miller <davem@davemloft.net>