Commit graph

691,473 commits

Author SHA1 Message Date
Bob Copeland
b6c7bafa7d ath10k: implement mesh support
Add support for mesh to ath10k.  We simply use an AP virtual interface
in the firmware in order to enable beaconing without TSF adoption, and
use the raw (802.11) transmit mode.

Due to firmware limitations, the firmware must operate in raw
(non-native 802.11) mode.  As this is configured at firmware init time,
a new "rawmode" modparam is added, and mesh interfaces are available
only if rawmode=true.  The firmware must advertise support for rawmode;
tested successfully with firmware 10.2.4.70.6-2.

When the module is loaded with (newly implemented) modparam rawmode=1, it
will enable operating an open mesh STA via something like the following:

    ip link set wlan0 down
    iw dev wlan0 set type mp
    ip link set wlan0 up
    iw dev wlan0 set freq 5745 80 5775
    iw dev wlan0 mesh join mesh-vht

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-17 13:52:57 +03:00
Bob Copeland
bc76c28719 ath10k: check for encryption before adding MIC_LEN
In the case of raw mode without nohwcrypt parameter, we
should still make sure the frame is protected before
adding MIC_LEN to avoid skb_under_panic errors.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-17 13:48:41 +03:00
Bob Copeland
0d031c8995 ath10k: enable monitor when OTHER_BSS requested
By default, ath10k restricts received frames to those matching BSSID.
When other BSS frames are requested (e.g. in mesh mode), add an internal
monitor device so those frames are not filtered.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2015-09-17 13:48:30 +03:00
Guo Zeng
a650fdd942 regmap: irq: add ack_invert flag for chips using cleared bits as ack
An user will be CSR SiRFSoC ARM chips.

Signed-off-by: Guo Zeng <Guo.Zeng@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 11:46:10 +01:00
Guo Zeng
7b7d1968e4 regmap: irq: add support for chips who have separate unmask registers
Some chips have separate unmask registers from mask registers for
some consideration of concurrency SMP write performance. And this
patch adds a flag for it.

An user will be CSR SiRFSoC ARM chips.

Signed-off-by: Guo Zeng <Guo.Zeng@csr.com>
Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 11:46:09 +01:00
kbuild test robot
31f4f0c640 ASoC: sunxi: fix platform_no_drv_owner.cocci warnings
sound/soc/sunxi/sun4i-codec.c:708:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci

CC: Emilio López <emilio@elopez.com.ar>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 11:38:03 +01:00
Jyri Sarha
14a998be08 ASoC: davinci-mcasp: Get rid of bclk_lrclk_ratio in private data
The slot_width is for essentially same thing. Instead of storing
bclk_lrclk_ratio, just store the slot_width. Comments has been updated
accordingly and some variable names changed to more descriptive.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 11:37:27 +01:00
Julia Lawall
8985729578 ASoC: qcom: change PTR_ERR argument
Apply PTR_ERR to the value that was recently assigned.

The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression x,y;
@@

if (IS_ERR(x) || ...) {
  ... when any
      when != IS_ERR(...)
(
   PTR_ERR(x)
|
*  PTR_ERR(y)
)
  ... when any
}
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 11:36:19 +01:00
Jyri Sarha
6c84e5917f ASoC: soc-core: Fix sparse warning in be32_to_cpup() call
Store return value of of_get_property() to a pointer of __be32 type as
device tree has big endian type. This fixes a sparse warning couple of
lines later when be32_to_cpup() is used to convert from big endian to
cpu endian.

The whole conversion is not really necessary, as we are only checking
if the value is zero or not, but I wanted to add it to remind in the
future that the data has to be converted before use. Compiler should
optimize the unnecessary operations away.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 11:36:05 +01:00
Charles Keepax
ccaadda319 ASoC: wm5110: Add additional analogue input enable for early revs
Earlier revisions of the wm5110/8280 silicon require a slightly more
complex procedure to enable analogue inputs. This patch adds this into
the driver.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-17 11:35:02 +01:00
Johan Hedberg
d8949aad3e Bluetooth: Delay check for conn->smp in smp_conn_security()
There are several actions that smp_conn_security() might make that do
not require a valid SMP context (conn->smp pointer). One of these
actions is to encrypt the link with an existing LTK. If the SMP
context wasn't initialized properly we should still allow the
independent actions to be done, i.e. the check for the context should
only be done at the last possible moment.

Reported-by: Chuck Ebbert <cebbert.lkml@gmail.com>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Cc: stable@vger.kernel.org # 4.0+
2015-09-17 12:28:27 +02:00
Thomas Hellstrom
b07bb761cf drm/vmwgfx: Only build on X86
ioremap_cache() is currently not available on some architectures.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
2015-09-17 02:13:42 -07:00
Takashi Iwai
2338f73d40 leds:lp55xx: Correct Kconfig dependency for f/w user helper
The commit [b67893206f: leds:lp55xx: fix firmware loading error]
tries to address the firmware file handling with user helper, but it
sets a wrong Kconfig CONFIG_FW_LOADER_USER_HELPER_FALLBACK.  Since the
wrong option was enabled, the system got a regression -- it suffers
from the unexpected long delays for non-present firmware files.

This patch corrects the Kconfig dependency to the right one,
CONFIG_FW_LOADER_USER_HELPER.  This doesn't change the fallback
behavior but only enables UMH when needed.

Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=944661
Fixes: b67893206f ('leds:lp55xx: fix firmware loading error')
Cc: <stable@vger.kernel.org> # v4.2+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:02:20 +02:00
Jacek Anaszewski
35bfe456be leds: leds-ipaq-micro: Add LEDS_CLASS dependency
Fix missing Kconfig LEDS_CLASS dependency.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-17 10:02:12 +02:00
Jacek Anaszewski
305c324f43 leds: aat1290: add 'static' modifier to init_mm_current_scale
Function init_mm_current_scale is used only locally. Make it static then.

Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:02:08 +02:00
Luis de Bethencourt
98f9cc7ffc leds: leds-ns2: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:02:05 +02:00
Luis de Bethencourt
e3df661ff3 leds: max77693: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:02:03 +02:00
Luis de Bethencourt
3682c7bdf5 leds: ktd2692: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:02:00 +02:00
Luis de Bethencourt
01736f07ca leds: bcm6358: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:01:57 +02:00
Luis de Bethencourt
6528ca19c1 leds: bcm6328: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:01:54 +02:00
Luis de Bethencourt
93a51aa406 leds: aat1290: Fix module autoload for OF platform driver
This platform driver has a OF device ID table but the OF module
alias information is not created so module autoloading won't work.

Signed-off-by: Luis de Bethencourt <luis@debethencourt.com>
Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
2015-09-17 10:01:51 +02:00
Jesse Barnes
eb120ef6a3 drm/i915: add more debug info for when atomic updates fail v3
I used these additional fields to track down the issue I saw on HSW.

v2: move debug fields into a substruct (Ville)
v3: clean up debug code more (Ville)

References: https://bugs.freedesktop.org/show_bug.cgi?id=91579
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-17 10:53:41 +03:00
Geliang Tang
d9072a3e80 drm/i915: fix kernel-doc warnings in i915_gem.c
Fix the following 'make htmldocs' warnings:

  .//drivers/gpu/drm/i915/i915_gem.c:1729: warning: No description found for parameter 'vma'
  .//drivers/gpu/drm/i915/i915_gem.c:1729: warning: No description found for parameter 'vmf'

  .//drivers/gpu/drm/i915/i915_gem.c:4962: warning: No description found for parameter 'old'
  .//drivers/gpu/drm/i915/i915_gem.c:4962: warning: No description found for parameter 'new'
  .//drivers/gpu/drm/i915/i915_gem.c:4962: warning: No description found for parameter 'frontbuffer_bits'

Signed-off-by: Geliang Tang <geliangtang@163.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2015-09-17 10:30:59 +03:00
Raphaël Beamonte
0063fdfb12 staging: rtl8192u: r8192U_core: fix comments lines over 80 characters
Move, replace and reorganize comments to stay under 80 characters
per line, as to follow the kernel code style. Some unuseful comments
have been removed.

Signed-off-by: Raphaël Beamonte <raphael.beamonte@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:52:29 -07:00
Marcos Canán
50fbb884e1 staging: comedi: drivers: coding style: fixed block comment style
This is a patch to the drivers.c file that fixes
a block comment style.

Signed-off-by: Marcos Canán <mcanan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:52:28 -07:00
Jes Sorensen
b3083eb8fd staging: rtl8723au: Clean up getPowerBase()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:50:05 -07:00
Jes Sorensen
784e36838a staging: rtl8723au: TurboScanOff is always true
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:50:05 -07:00
Jes Sorensen
36708d00b1 staging: rtl8723au: Tidy up SetTxPowerLevel8723A()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:50:05 -07:00
Jes Sorensen
e5241dc019 staging: rtl8723au: Fold getTxPowerIndex() into PHY_SetTxPowerLevel8723A()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:50:04 -07:00
Jes Sorensen
8b9283234e staging: rtl8723au: Eliminate dummy ccxPowerIndexCheck()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:50:04 -07:00
Jes Sorensen
96a98aa1fc staging: rtl8723au: Simplify eeprom content checking
This eliminates the ugly Hal_EEValueCheck() function

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:50:04 -07:00
Glen Lee
2602b2bf41 staging: wicl1000: remove function pointer wlan_handle_rx_que
The function pointer wlan_handle_rx_que is not called anywhere. Delete
wlan_handle_rx_que and it's assignment code.
But the function wilc_wlan_handle_rxq in assignment code is used. So leave it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:48:10 -07:00
Chaehyun Lim
9af382bca5 staging: wilc1000: replace INLINE with static inline
INLINE macro is defined as static __inline so that it is replaced by
static inline.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:46:01 -07:00
Chaehyun Lim
50b51dac4a staging: wilc1000: wilc_wlan.c: use BIT(x) macro
Remove bit shift macro that is custom defined, then replace BIT(x)
macro.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:46:01 -07:00
Glen Lee
d7ed06a384 staging: wilc1000: remove unused variable rxq_thread
The rxq_thread never runs since it's kthread_run code was delete in a previous
patch. Remove kthread_run and it's related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:43:06 -07:00
Glen Lee
85718c2d6b staging: wilc1000: remove unused semaphore and it's related codes
Variable rxq_event, rxq_wait_event and rxq_wait have the same pointer.

nwi->os_context.rxq_wait_event = (void *)&g_linux_wlan->rxq_event;
g_wlan.rxq_wait = inp->os_context.rxq_wait_event;

They are never aquired(down) since down function was only called in
linux_wlan_rxq_task which was deleted in a previous patch.
So delete variable rxq_event, rxq_wait_event, rxq_wait and it's related codes.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:43:06 -07:00
Glen Lee
51f8a39911 staging: wilc1000: remove variable rxq_thread_started
rxq_thread_started is initiallized but never used in the driver. Remove
the variable and init code line.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:43:06 -07:00
Glen Lee
ce25267907 staging: wilc1000: remove function linux_wlan_rxq_task
linux_wlan_rxq_task is not used in the driver. Just remove it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:43:06 -07:00
Glen Lee
25a84832bb staging: wilc1000: remove define TCP_ENHANCEMENTS and it's related code
TCP_ENHANCEMENTS is always in use. Remove define TCP_ENHANCEMENTS, ifdef line,
ifndef line and codes inside ifndef.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:43:06 -07:00
Glen Lee
fcc6ef9230 staging: wilc1000: remove define WILC_P2P and ifdef line
WILC_P2P is always used in the driver. So delete define WILC_P2P and ifdef line.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:43:06 -07:00
Glen Lee
108b3439b7 staging: wilc1000: remove define WILC_AP_EXTERNAL_MLME and ifdef line
This driver use WILC_AP_EXTERNAL_MLME define always. Delete define
WILC_AP_EXTERNAL_MLME and ifdef line.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:43:05 -07:00
Leo Kim
6569738ad5 staging: wilc1000: remove wilc_errorsupport.h
This patch removes the wilc_errorsupport.h which is not used anymore and
also deletes #include "wilc_errorsupport.h" from the source code.

In addition, adds linux_wlan_common.h file in the wilc_msgqueue.c file
in order to use PRINT macros defined in the linux_wlan_common.h file.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:40:13 -07:00
Leo Kim
e6e12661d8 staging: wilc1000: replace wilc error types with the generic error types
This patch replaces the error types defined by wilc driver with the
generic error types provided by the Linux kernel.
- WILC_SUCCESS			0
- WILC_FAIL				-EFAULT
- WILC_BUSY				-EBUSY
- WILC_INVALID_ARGUMENT		-EINVAL
- WILC_INVALID_STATE		-EINVAL
- WILC_BUFFER_OVERFLOW		-EOVERFLOW
- WILC_NULL_PTR			-EFAULT
- WILC_TIMEOUT			-ETIMEDOUT
- WILC_NOT_FOUND			-ENOENT
- WILC_NO_MEM			-ENOMEM

After then removes all wilc definitions.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:40:13 -07:00
Leo Kim
559e1a04e2 staging: wilc1000: remove definitions unused
Remove the definitions which are not used anywhere.
- WILC_ALREADY_EXSIT
- WILC_EMPTY
- WILC_FULL
- WILC_CANCELED
- WILC_INVALID_FILE
- WILC_UNSUPPORTED_VERSION
- WILC_FILE_EOF

Remove the definition which is not used anymore.
- WILC_CATCH

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:40:13 -07:00
Leo Kim
24db713fe5 staging: wilc1000: remove the macro WILC_ERRORREPORT
This patch removes the macro WILC_ERRORREPORT which is not used
anymore by replacing it with the plain statements.

The compiler complains the build warnings in some functions for WILC_CATCH and
ERRORHANDLER as unused definitions. So, this patch also removes WILC_CATCH and
ERRORHANDLER from some of functions.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:39:06 -07:00
Leo Kim
7dc1d0cc1f staging: wilc1000: remove the macro WILC_ERRORCHECK
This patch removes the macro WILC_ERRORCHECK which is not used
anymore by replacing it with the plain statements.

This patch also removes the WILC_CATCH macros from some of functions not
to make the build warnings.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:38:17 -07:00
Leo Kim
7ae433631e staging: wilc1000: remove a macro WILC_NULLCHECK
This patch replaces WILC_NULLCHECK with the plain statements and then removes
the macro WILC_NULLCHECK in wilc_errorsupport.h which is not used anymore.

Signed-off-by: Leo Kim <leo.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:38:17 -07:00
Glen Lee
c116299cff staging: wilc1000: remove unused variable g_flushing_in_progress
g_flushing_in_progress is never used so just delete it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:45 -07:00
Glen Lee
57c111a472 staging: wilc1000: coreconfigurator.h: remove unused defines
The define MAX_PACKET_BUFF_SIZE and STATUS_MSG_LEN is not used in the driver.
Delete two defines.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:45 -07:00
Glen Lee
be6c212a6f staging: wilc1000: delete function declaration SendRawPacket
SendRawpacket is declared but not implemented. It is not used also.
So just delete it.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00