Commit graph

691,473 commits

Author SHA1 Message Date
Glen Lee
496a77257c staging: wilc1000: remove unused variables
Variable g_num_total_switches is never used so just remove it.
gastrWIDs is also not used because g_num_total_switches is deleted.
Remove gastrWIDs also.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00
Glen Lee
dd33a8651e staging: wilc1000: delete unused global variables.
gstrConfigPktInfo, SemHandleSendPkt and SemHandlePktResp are never used in
the drivers. So just delete the variables and it's related code.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00
Glen Lee
b701da39ed staging: wilc1000: remove unnecessary extern function declaration
Function NetworkInfoReceived, GnrlAsyncInfoReceived and
host_int_ScanCompleteReceived are declared in the header file already.
Just removes the declaration and comments.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00
Glen Lee
20f4449107 staging: wilc1000: remove unused defines
This patch removes follwing unused defines.
MAX_CFG_PKTLEN
MSG_HEADER_LEN
QUERY_MSG_TYPE
WRITE_MSG_TYPE
RESP_MSG_TYPE
WRITE_RESP_SUCCESS
INVALID
MAC_ADDR_LEN

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00
Glen Lee
d52979b3bb staging: wilc1000: remove unnecessary define FIVE_GHZ_BAND
wilc1000 driver does not support five Ghz band. Remove FIVE_GHZ_BAND and
it's related code.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00
Glen Lee
d30244a032 staging: wilc1000: remove useless define PHY_802_11n
The define PHY_802_11n is useless because wilc1000 support 802.11n as always.
Remove PHY_802_11n and it related code.

Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00
Tony Cho
2b4738c0b4 staging: wilc1000: remove PANDA_BOARD
This patch removes one of the platform dependencies, PANDA_BOARD from the
driver codes. The device tree will provide the platform dependencies in
the future commits.

Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Glen Lee <glen.lee@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:34:44 -07:00
Greg Kroah-Hartman
aa1471a301 usb: fixes for v4.3-rc2
First series of fixes for v4.3-rc cycle. The major points are
 a fix to a regression which would let gadget driver disable
 an endpoint that's already disabled and a fix to MUSB to make
 sure IRQs are masked when we're going to suspend and unmasked
 on resume.
 
 Signed-off-by: Felipe Balbi <balbi@ti.com>
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJV+Zw6AAoJEIaOsuA1yqREdFgP/i9xNC80evxVuEJuOLvojYU0
 UWosc2/9PXLfQFfaK/RaXdY/FyHeDdOgXHkdSHDy86GGAYNY1VPhZ8qjcoxKWDZc
 ElgsRLEeCY2GwZrHewS9wnzH0lPPWEta14hXJngdOvDFYz4CyQqvEuNFUzKG1plT
 4eRN0LBuqOZTe4Mp+iYsK97DinFIi4bAVvEqApYTim8pF/s6TUMpnv8N4gJaW01M
 kwR9svduMl6vJbO6NXedpj9L+tYqr+cMhByexX543XRw5lWfoLyad8GwcH1CjEay
 gMH/cEq36baLRRdr3EvfcSI+pSlispk/VOdw+YXWtWSNStu8CMeElojAAvr5PaxO
 9WJ/Vf8c+NExjiCEOsCUrPTC7QCAubxXmikDC2UxOpcTMibBHODglQIJ/sj14LK6
 9j45T3jsu49AmTF2yKuV8CiNLT7uE8kFTirYk1AqDIyCFhNcQiy4ZQGDvd8E+uFv
 WHKA0zgJvIeeOjPNZqlifuCvaxiY1D7xCkU0O/J7JzLc6iBU3nc6mYsiG2YM3Pdu
 YovgNJMhqD/rGdFQN3d6PgPBC4JxcYluLpxxB7PWAEgqwL8eIHH85+BcmH1WYFhX
 74vVLutYJ+c6RzJPWJRu5tP/BcLlIbUD1ATJlbfyeSbiERqH0FCtxUgE0GuyZvcp
 YR9da/I3TxDzVQY+zlmS
 =TQho
 -----END PGP SIGNATURE-----

Merge tag 'fixes-for-v4.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus

Felipe writes:

usb: fixes for v4.3-rc2

First series of fixes for v4.3-rc cycle. The major points are
a fix to a regression which would let gadget driver disable
an endpoint that's already disabled and a fix to MUSB to make
sure IRQs are masked when we're going to suspend and unmasked
on resume.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-16 21:33:13 -07:00
Shraddha Barke
efc0cfa134 Staging: most: aim-network: Replace pr_info with netdev_info
Use netdev_* family of macros when there is reference to a network
device. dev->name is removed as netdev_info will print the device
name

Signed-off-by: Shraddha Barke <shraddha.6596@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:32:45 -07:00
Juston Li
2877f245cf staging/lustre: use __noreturn for lbug_with_loc
fixes sparse error:
drivers/staging/lustre/lustre/libcfs/linux/linux-debug.c:149:6: error:
symbol 'lbug_with_loc'redeclared with different type (originally declared at
drivers/staging/lustre/lustre/libcfs/linux/../../../include/linux/libcfs/libcfs_private.h:82)
- different modifiers

Use the __noreturn macro instead of __attribute__((noreturn))
The macro is exactly that but its usage seems more common and
it is bit more readable.

Signed-off-by: Juston Li <juston.h.li@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:25:25 -07:00
Anjali Menon
59cfb96fcd staging: lustre: lnet: lnet: Removed a space
Removed a space to fix the following coding style warning detected by
checkpatch:

WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Anjali Menon <cse.anjalimenon@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 21:25:25 -07:00
Oleg Drokin
f1c4ad3a2e staging/lustre: Remove server defines from lustre_disk.h
Take initial stab at removing server-disk related defines that
client does not need.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:15 -07:00
Oleg Drokin
aa2d3e81a4 staging/lustre: remove IS_MDS|IS_OST|IS_MGS defines and users
These could only happen on the server, so they make no sense
on the client.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:15 -07:00
Oleg Drokin
15b441cd9f staging/lustre: Remove IS_SERVER and all users
Since the client can never be server, this is all dead code.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:15 -07:00
Oleg Drokin
bea5820d7a staging/lustre: remove obd_memory stats counter
Now that we no longer track allocated memory, remove
obd_memory statistics counter and all references to it everywhere

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:14 -07:00
Oleg Drokin
9ea9d6652b staging/lustre: Remove lustre used memory tracking framework
Lustre memory allocation framework has a feature to track amount
of allocated memory, but since it's not being used consistently anymore
and is on the way out in general, just remove it.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:14 -07:00
Oleg Drokin
543d5f3d28 staging/lustre: Remove memory allocation fault injection framework
Lustre memory allocation wrappers also included a fault injection
framework that's totally redundant, since in-kernel offering is
actually superior to what we had.
So let's remove it.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:13 -07:00
Oleg Drokin
e1708ad714 staging/lustre: Remove unused OBD_ALLOC* and OBD_FREE macros
This removes now unused OBD_ALLOC, OBD_ALLOC_GFP, OBD_ALLOC_PTR,
OBD_ALLOC_LARGE and supporting infrastructure.
Also OBD_FREE, OBD_FREE_PTR, OBD_FREE_LARGE and supporting infrastructure.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:13 -07:00
Oleg Drokin
35eaf88724 staging/lustre: Remove stray bit of userland utils code
The UTILS are userland and I see it's causing confusion
with things beging already converted to kmalloc,
so just remove it.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:13 -07:00
Oleg Drokin
df29ca2114 staging/lustre: Replace last users of OBD_ALLOC/FREE_LARGE
OBD_ALLOC_LARGE is now replaced with libcfs_kvzalloc and
OBD_FREE_LARGE is now replaced with kvfree.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:12 -07:00
Oleg Drokin
1089175c9c staging/lustre/ptlrpc: Replace OBD_FREE_PTR with kfree
Part of effort of getting rid of custom Lustre alloc/free macros

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:12 -07:00
Oleg Drokin
781c848aa3 staging/lustre: Convert lustre_cfg_new/free to use kzalloc/kfree
Part of effort of getting rid of custom Lustre allocation macros

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:12 -07:00
Oleg Drokin
3dc6f32522 staging/lustre/fld: Replace OBD_ALLOC_GFP with kzalloc
Part of effort to get rid of custom Lustre allocation macros.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:11 -07:00
Oleg Drokin
c0a2472fa8 staging/lustre: Remove references to OBD_ALLOC/FREE* in comments
Since everything is now supposed to use regular kernel alloc and
free functions.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:11 -07:00
Oleg Drokin
d37c8781c0 staging/lustre/obdclass: replace OBD_ALLOC_GFP with kzalloc
Part of getting rid of custom Lustre allocation macros.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:11 -07:00
Oleg Drokin
af13af52e4 staging/lustre/llite: Get rid of OBD_ALLOC/FREE_PTR
The remaining users in ll_open_cleanup and obd_mod_alloc
are converted to regular kzalloc/kfree.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:10 -07:00
Oleg Drokin
fca5ba8a1d staging/lustre: Remove users of OBD_ALLOC/FREE_PTR lu_object.h
These are converted to regular kzalloc/kfree calls.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:10 -07:00
Oleg Drokin
f6173fe0be staging/lustre: Remove unused OBD_CPT_ALLOC* macros
OBD_CPT_ALLOC and friends are no longer used, so remove them.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:10 -07:00
Oleg Drokin
8800d8cf7e staging/lustre: Remove unused OBD_VMALLOC
These macros are not used anymore, so let's remove them,
also __OBD_VMALLOC_VEROBSE and OBD_CPT_VMALLOC

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:09 -07:00
Oleg Drokin
6fd57333de staging/lustre: Remove OBD_CPT_ALLOC_LARGE
Remove OBD_CPT_ALLOC_LARGE define and convert the only user to
libcfs_kvzalloc_cpt.

Signed-off-by: Oleg Drokin <oleg.drokin@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-16 20:32:09 -07:00
Alex Gartrell
4e478098ac ipvs: add sysctl to ignore tunneled packets
This is a way to avoid nasty routing loops when multiple ipvs instances can
forward to eachother.

Signed-off-by: Alex Gartrell <agartrell@fb.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
2015-09-17 11:50:02 +09:00
Anson Huang
ee4a5f838c ARM: imx: add suspend/resume support for i.mx6ul
This patch adds suspend function for i.MX6UL, it supports
"standby" and "mem" mode, for "standby" mode, SoC will
enter STOP mode only, while for "mem" mode, SoC will
enter STOP mode and DDR IO will be set to low power
mode.

As i.MX6UL contains a "Cortex-A7" ARM core which has no
PL310, so we need to avoid any PL310 operations during
suspend/resume, also, we need to flush Cortex-A7's inernal
L2 cache before suspend.

Signed-off-by: Anson Huang <b20788@freescale.com>
2015-09-17 08:54:35 +08:00
Lucas Stach
e1ffceb078 ARM: imx53: qsrb: fix PMIC interrupt level
The MC34708 PMIC interrupt level is active high, but was set to
active low in the devicetree, probably as a result of a copy and
paste error from the QSB board.

This caused IRQ storms and led to the kernel disabling the PMIC
interrupt.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-17 08:54:13 +08:00
Lucas Stach
34adba7117 ARM: imx53: include IRQ dt-bindings header
Allows to use the more meaningful IRQ flag defines instead of
the raw values.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-17 08:54:13 +08:00
Haibo Chen
44103fcfef ARM: imx_v6_v7_defconfig: enable imx6ul_tsc
Enable imx6ul touchscreen controller

Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-17 08:53:18 +08:00
Anson Huang
8efaf5ed4d clk: imx: increase AXI clock rate to 264MHz for i.MX6UL
On i.MX6UL, AXI clock rate's design target is 264MHz, but by default
it is only set to 198MHz which is NOT good enough for performance,
this patch increases AXI clock rate from 198MHz to 264MHz to meet
the design target, this is done by switching its parent clock
"periph" from 396MHz PFD to 528MHz PLL.

Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2015-09-17 08:52:17 +08:00
LEROY Christophe
400c47d81c powerpc32: memset: only use dcbz once cache is enabled
memset() uses instruction dcbz to speed up clearing by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memset(). Allthough no part of the code
explicitly uses memset(), GCC may make calls to it.

This patch modifies memset() such that at startup, memset()
unconditionally skip the optimised bloc that uses dcbz instruction.

Once the initial MMU is set up, in machine_init() we patch memset()
by replacing this inconditional jump by a NOP

Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-17 10:36:53 +10:00
LEROY Christophe
1cd03890ea powerpc32: memcpy: only use dcbz once cache is enabled
memcpy() uses instruction dcbz to speed up copy by not wasting time
loading cache line with data that will be overwritten.
Some platform like mpc52xx do no have cache active at startup and
can therefore not use memcpy(). Allthough no part of the code
explicitly uses memcpy(), GCC makes calls to it.

This patch modifies memcpy() such that at startup, memcpy()
unconditionally jumps to generic_memcpy() which doesn't use
the dcbz instruction.

Once the initial MMU is set up, in machine_init() we patch memcpy()
by replacing this inconditional jump by a NOP

Reported-by: Michal Sojka <sojkam1@fel.cvut.cz>
Tested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-09-17 10:36:44 +10:00
Roger Quadros
84ad1bab0e ARM: dts: am57xx-beagle-x15: use palmas-usb for USB2
The VBUS line of USB2 is connected to VBUS detect logic on
the PMIC. Use the palmas-usb driver to report VBUS events
to the USB driver.

As the palmas-usb driver supports GPIO based ID reporting
provide the GPIO for ID pin as well.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16 17:04:26 -07:00
Grazvydas Ignotas
f4746176f9 ARM: omap2plus_defconfig: enable GPIO_PCA953X
This enables tca6424a GPIO expander driver that in turn enables
TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm.
In other words, it makes HDMI work on OMAP5 uevm.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16 17:01:39 -07:00
Grazvydas Ignotas
1dbdad7507 ARM: dts: omap5-uevm.dts: fix i2c5 pinctrl offsets
The i2c5 pinctrl offsets are wrong. If the bootloader doesn't set the
pins up, communication with tca6424a doesn't work (controller timeouts)
and it is not possible to enable HDMI.

Fixes: 9be495c426 ("ARM: dts: omap5-evm: Add I2c pinctrl data")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16 17:01:39 -07:00
Dave Gerlach
08224a7d41 ARM: OMAP2+: AM43XX: Enable autoidle for clks in am43xx_init_late
Add omap2_clk_enable_autoidle_all to am43xx_init_late otherwise the call
to omap2_clk_disable_autoidle_all in am43xx_init_early may cause some
clocks to always stay active and prevent low power mode transitions.

Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16 17:01:39 -07:00
Nishanth Menon
5005296e74 ARM: dts: am57xx-beagle-x15: Update Phy supplies
Originally, all the SoC PHY rails were supplied by LDO3. However, as a
result of characterization, it was determined that this posed a risk in
extreme load  conditions. Hence the PHY rails are split between two
different LDOs. Update the related node as a result

LDO3/VDDA_1V8_PHYA supplies vdda_usb1, vdda_usb2, vdda_sata, vdda_usb3
LDO4/VDDA_1V8_PHYB supplies vdda_pcie1, vdda_pcie0, vdda_hdmi, vdda_pcie

NOTE: We break compatibility with pre-production boards with this change
since, the PMIC LDO4 is disabled at OTP level.

The new configuration is the plan of record and all pre-production
boards are supposed to be replaced with the latest boards matching the
mentioned configuration.

Some very few 10 something boards have been created and
stopped production till the latest modifications were done (PMIC USB
interrupt, LDO4 etc) - and all of those boards are now getting
scrapped.. If there are any (as per tracking information, there should
not be any), TI should be contacted to have them replaced.

Signed-off-by: Nishanth Menon <nm@ti.com>
[tony@atomide.com: updated commit about these being TI internal protos]
Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16 17:00:29 -07:00
Doug Anderson
7ae85dc768 ARM: 8425/1: kgdb: Don't try to stop the machine when setting breakpoints
In (23a4e40 arm: kgdb: Handle read-only text / modules) we moved to
using patch_text() to set breakpoints so that we could handle the case
when we had CONFIG_DEBUG_RODATA.  That patch used patch_text().
Unfortunately, patch_text() assumes that we're not in atomic context
when it runs since it needs to grab a mutex and also wait for other
CPUs to stop (which it does with a completion).

This would result in a stack crawl if you had
CONFIG_DEBUG_ATOMIC_SLEEP and tried to set a breakpoint in kgdb.  The
crawl looked something like:

 BUG: scheduling while atomic: swapper/0/0/0x00010007
 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.2.0-rc7-00133-geb63b34 #1073
 Hardware name: Rockchip (Device Tree)
  (unwind_backtrace) from [<c00133d4>] (show_stack+0x20/0x24)
  (show_stack) from [<c05400e8>] (dump_stack+0x84/0xb8)
  (dump_stack) from [<c004913c>] (__schedule_bug+0x54/0x6c)
  (__schedule_bug) from [<c054065c>] (__schedule+0x80/0x668)
  (__schedule) from [<c0540cfc>] (schedule+0xb8/0xd4)
  (schedule) from [<c0543a3c>] (schedule_timeout+0x2c/0x234)
  (schedule_timeout) from [<c05417c0>] (wait_for_common+0xf4/0x188)
  (wait_for_common) from [<c0541874>] (wait_for_completion+0x20/0x24)
  (wait_for_completion) from [<c00a0104>] (__stop_cpus+0x58/0x70)
  (__stop_cpus) from [<c00a0580>] (stop_cpus+0x3c/0x54)
  (stop_cpus) from [<c00a06c4>] (__stop_machine+0xcc/0xe8)
  (__stop_machine) from [<c00a0714>] (stop_machine+0x34/0x44)
  (stop_machine) from [<c00173e8>] (patch_text+0x28/0x34)
  (patch_text) from [<c001733c>] (kgdb_arch_set_breakpoint+0x40/0x4c)
  (kgdb_arch_set_breakpoint) from [<c00a0d68>] (kgdb_validate_break_address+0x2c/0x60)
  (kgdb_validate_break_address) from [<c00a0e90>] (dbg_set_sw_break+0x1c/0xdc)
  (dbg_set_sw_break) from [<c00a2e88>] (gdb_serial_stub+0x9c4/0xba4)
  (gdb_serial_stub) from [<c00a11cc>] (kgdb_cpu_enter+0x1f8/0x60c)
  (kgdb_cpu_enter) from [<c00a18cc>] (kgdb_handle_exception+0x19c/0x1d0)
  (kgdb_handle_exception) from [<c0016f7c>] (kgdb_compiled_brk_fn+0x30/0x3c)
  (kgdb_compiled_brk_fn) from [<c00091a4>] (do_undefinstr+0x1a4/0x20c)
  (do_undefinstr) from [<c001400c>] (__und_svc_finish+0x0/0x34)

It turns out that when we're in kgdb all the CPUs are stopped anyway
so there's no reason we should be calling patch_text().  We can
instead directly call __patch_text() which assumes that CPUs have
already been stopped.

Fixes: 23a4e4050b ("arm: kgdb: Handle read-only text / modules")
Reported-by: Aapo Vienamo <avienamo@nvidia.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-16 23:58:46 +01:00
Andre Przywara
90cde5584a ARM: 8437/1: dma-mapping: fix build warning with new DMA_ERROR_CODE definition
Commit 96231b2686: ("ARM: 8419/1: dma-mapping: harmonize definition
of DMA_ERROR_CODE") changed the definition of DMA_ERROR_CODE to use
dma_addr_t, which makes the compiler barf on assigning this to an
"int" variable on ARM with LPAE enabled:
*************
In file included from /src/linux/include/linux/dma-mapping.h:86:0,
                 from /src/linux/arch/arm/mm/dma-mapping.c:21:
/src/linux/arch/arm/mm/dma-mapping.c: In function '__iommu_create_mapping':
/src/linux/arch/arm/include/asm/dma-mapping.h:16:24: warning:
overflow in implicit constant conversion [-Woverflow]
 #define DMA_ERROR_CODE (~(dma_addr_t)0x0)
                        ^
/src/linux/arch/arm/mm/dma-mapping.c:1252:15: note: in expansion of
macro DMA_ERROR_CODE'
  int i, ret = DMA_ERROR_CODE;
               ^
*************

Remove the actually unneeded initialization of "ret" in
__iommu_create_mapping() and move the variable declaration inside the
for-loop to make the scope of this variable more clear.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-16 23:58:46 +01:00
Russell King
12fc7306e6 ARM: get rid of needless #if in signal handling code
Remove the #if statement which caused trouble for kernels that support
both ARMv6 and ARMv7.  Older architectures do not implement these bits,
so it should be safe to always clear them.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2015-09-16 23:58:46 +01:00
Krzysztof Kozlowski
6658356014 ARM: dts: Add support Odroid XU4 board for exynos5422-odroidxu4
Add Hardkernel Odroid XU4 board Device Tree sources. The board differs
from Odroid XU3 and XU3-Lite by:
1. No green and red LEDs (except standard red power LED).
2. Only two PWM outputs are used (fan and blue LED)
3. No audio codec.
4. Two USB3 ports in host mode (no micro USB3 connector for OTG).
5. Realtek RTL8153-CG gigabit network adapter (instead of SMSC9514).
6. Additional connector with IO ports (I2S_0, I2C_5).
7. No DisplayPort (like XU3-Lite).
8. No TI INA231 power measurement sensors (like XU3-Lite).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-17 07:49:30 +09:00
Krzysztof Kozlowski
8cec734904 ARM: dts: Split audio configuration to separate exynos5422-odroidxu3-audio
The Odroid XU4 board does not have audio codec so before adding DTS
for new board split the audio codec to separate DTSI file. Include
the audio codec DTSI in Odroid XU3 and XU3-Lite boards.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-17 07:49:24 +09:00
Krzysztof Kozlowski
0fb033bb3a ARM: dts: Fix power off method for exynos5422-odroidxu3-common
The Odroid XU3 family boards have ACOKB pin of PMIC grounded, instead of
pulled up as usual. This means that PMIC must manually set PWRHOLD field
in its CTRL1 register to low before initiating power down.

This fixes Odroid XU3 powering off:
[   25.966053] reboot: Power down
[   25.967679] Power down.
[   26.070174] Power down failed, please power off system manually.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reported-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-17 07:48:12 +09:00
Krzysztof Kozlowski
6a4479f965 dt-bindings: Document grounded ACOKB pin on S2MPS11
Document a new Device Tree property 'samsung,s2mps11-acokb-ground'
indicating that ACOKB pin of S2MPS11 PMIC is connected to the ground
so the PMIC must manually set PWRHOLD bit in CTRL1 register to turn
off the power.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kukjin Kim <kgene@kernel.org>
2015-09-17 07:48:12 +09:00