Commit graph

691,473 commits

Author SHA1 Message Date
Stephen Boyd
2b94fe2ac9 ARM: 8215/1: vfp: Silence mvfr0 variable unused warning
Stephen Rothwell reports that commit 3f4c9f8f0a20 ("ARM: 8197/1:
vfp: Fix VFPv3 hwcap detection on CPUID based cpus") introduced a
variable unused warning.

arch/arm/vfp/vfpmodule.c: In function 'vfp_init':
arch/arm/vfp/vfpmodule.c:725:6: warning: unused variable 'mvfr0'
[-Wunused-variable]
  u32 mvfr0;

Silence this warning by using IS_ENABLED instead of ifdefs.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-21 15:24:44 +00:00
Stephen Boyd
6c96a4a6e2 ARM: 8197/1: vfp: Fix VFPv3 hwcap detection on CPUID based cpus
The subarchitecture field in the fpsid register is 7 bits wide on
ARM CPUs using the CPUID identification scheme, spanning bits 22
to 16. The topmost bit is used to designate that the
subarchitecture designer is not ARM when it is set to 1. On
non-CPUID scheme CPUs the subarchitecture field is only 4 bits
wide and the higher bits are used to indicate no double precision
support (bit 20) and the FTSMX/FLDMX format (bits 21-22).

The VFP support code only looks at bits 19-16 to determine the
VFP version. On Qualcomm's processors (Krait and Scorpion) we
should see that we have HWCAP_VFPv3 but we don't because bit 22
is set to 1 to indicate that the subarchitecture is not
implemented by ARM and the rest of the bits are left as 0 because
this is the first subarchitecture that Qualcomm has designed.
Unfortunately we can't just widen the FPSID subarchitecture
bitmask to consider all the bits on a CPUID scheme because there
may be CPUs without the CPUID scheme that have VFP without double
precision support and then the version would be a very wrong and
large number. Instead, update the version detection logic to
consider if the CPU is using the CPUID scheme.

If the CPU is using CPUID scheme, use the MVFR registers to
determine what version of VFP is supported. We already do this
for VFPv4, so do something similar for VFPv3 and look for single
or double precision support in MVFR0. Otherwise fall back to
using FPSID to detect VFP support on non-CPUID scheme CPUs. We
know that VFPv3 is only present in CPUs that have support for the
CPUID scheme so this should be equivalent.

Tested-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-21 15:24:43 +00:00
Stephen Boyd
6f0f2a9f0f ARM: 8196/1: vfp: Workaround bad MVFR1 register on some Kraits
Certain versions of the Krait processor don't report that they
support the fused multiply accumulate instruction via the MVFR1
register despite the fact that they actually do. Unfortunately we
use this register to identify support for VFPv4. Override the
hwcap on all Krait processors to indicate support for VFPv4 to
workaround this.

Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2014-11-21 15:24:41 +00:00
Pankaj Dubey
edeeec85f7 serial: samsung: Fix serial config dependencies for exynos7
Exynos7 has a similar serial controller to that present in older Samsung
SoCs. To re-use the existing serial driver on Exynos7 we need to have
SERIAL_SAMSUNG_UARTS_4 and SERIAL_SAMSUNG_UARTS selected. This is not
possible because these symbols are dependent on PLAT_SAMSUNG which is
not present for the ARMv8 based exynos7.

Change the dependency of these symbols from PLAT_SAMSUNG to the serial
driver thus making it available on exynos7. As the existing platform
specific code making use of these symbols is related to uart driver this
change in dependency should not cause any issues.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-22 00:09:25 +09:00
Markus Elfring
7b0f000b2f usb: gadget: function: delete an unnecessary check before rndis_add_hdr()
The rndis_add_hdr() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:08:12 -06:00
Marek Szyprowski
dc6e69e603 usb: dwc2: gadget: rework suspend/resume code to correctly restore gadget state
Suspend/resume code assumed that the gadget was always started and
enabled to connect to usb bus. This means that the actual state of the
gadget (started/stopped or connected/disconnected) was not correctly
preserved on suspend/resume cycle. This patch fixes this issue.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:07:42 -06:00
Marek Szyprowski
7ad8096edf usb: dwc2: gadget: add mutex to serialize init/deinit calls
This patch adds mutex, which protects initialization and
deinitialization procedures against suspend/resume methods. This mutex
will be needed by the updated suspend/resume calls, which tracks gadget
state.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:07:38 -06:00
Marek Szyprowski
4ace06e8b3 usb: dwc2: gadget: rework disconnect event handling
This patch adds a call to s3c_hsotg_disconnect() from 'end session'
interrupt (GOTGINT_SES_END_DET) to correctly notify gadget subsystem
about unplugged usb cable. DISCONNINT interrupt cannot be used for this
purpose, because it is asserted only in host mode.

To avoid reporting disconnect event more than once, a disconnect call has
been moved from USB_REQ_SET_ADDRESS handling function to SESSREQINT
interrupt. This way driver ensures that disconnect event is reported
either when usb cable is unplugged or every time the host starts a new
session. To handle devices which has been synthesized without
SRP support, connected state is set in ENUMDONE interrupt.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:07:34 -06:00
Vivek Gautam
ed692a99f3 usb: dwc3: exynos: Add provision for AXI UpScaler clock on exynos7
DWC3 controller on Exynos7 SoC has separate control for
AXI UpScaler which connects DWC3 DRD controller to AXI bus.
Get the gate clock for the same to control it across power
cycles.

Suggested-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:07:29 -06:00
Vivek Gautam
72d996fc7a usb: dwc3: exynos: Add provision for suspend clock
DWC3 controller on Exynos SoC series have separate control for
suspend clock which replaces pipe3_rx_pclk as clock source to
a small part of DWC3 core that operates when SS PHY is in its
lowest power state (P3) in states SS.disabled and U3.

Suggested-by: Anton Tikhomirov <av.tikhomirov@samsung.com>
Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:06:43 -06:00
Vivek Gautam
c1a3acaadd usb: dwc3: exynos: Remove local variable for clock from probe
There's no need to keep one local variable for clock, and
then assign the same to 'clk' member of dwc3_exynos.
Just cleaning it up.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:06:40 -06:00
Kiran Raparthy
df9f7b311d usb: phy: introduce usb_phy_set_event interface
PHY drivers require a generic interface to handle per-PHY events.

usb_phy_set_event interface sets event to phy event.
PHY drivers call this interface for each phy event.

Cc: Felipe Balbi <balbi@ti.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-kernel@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Cc: Android Kernel Team <kernel-team@android.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Arve Hj�nnev�g <arve@android.com>
Cc: Benoit Goby <benoit@android.com>
[Original patch in Android from Todd]
Cc: Todd Poynor <toddpoynor@google.com>
Signed-off-by: Kiran Raparthy <kiran.kumar@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2014-11-21 09:05:45 -06:00
Thomas Gleixner
b9e6df0a2d Handle all uncorrected error reports in the same way (soft offline
the page). We used to only do that for SRAO (software recoverable
 action optional) machine checks, but it makes sense to also do it
 for UCNA (UnCorrected No Action) logs found by CMCI or polling.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUbnMdAAoJEKurIx+X31iBQZoP/iy1bmIz8SzY3TjtKuTw+s7w
 j8j00QNYiYYz3m6LS+UG/CYA8G2GEm8GUYRGcZcnp8IWV1G5YxoK97QMHHvfvkbS
 apbVpSUtosaJd9eeTc5wbpqvNdPhay+L6kTn/thRNXEC3/82mmzb8kfjp5QP5uV0
 hBTcbHfA9LiGkAHQ8N7xPV/GJjMYnEuWU5U+Ny5IJTUfvLW4461ZgtXVFCJXCgvC
 RBIZAf0OuvOOz4vouiiLbzNdDmpjHk0cVxlnsb0oGfXK2uYsB50LtzmWmfvEbNrI
 xoWcpTi+W9odFNaoCk36T2RD/tQmX3VK9j51pcGmASFD4GJgkoCbB2v8oJmYhZ8t
 TOy2hYHis7jRIaz+q3nG3GXKNbnDM/XfxMbndo9M97MIfm4MpAZj2s9enZ2+ciHa
 HXjAJI+eQb/OarnuFiE8hZt4Z2nbTM+tNR7DDR5swJ1DMdhC1LoKUuXeWf4esfzi
 +4N7HWat8mPL1VbYLleveNVLoS4e56F/uwJQ331MZoulk+co051xjPX8qO7VGj0G
 9L32JNSMjWr7q99PSOe7cbPwmAAg7s5fyEOQRO+D4jTRcHzB0gYSDxewOVLA5UxO
 +rX1YNpdrGF1YWp8bxzCg3gi44YF/0mpph8TDb+Fcq8T3s2C8C+YXsIZPemxZGsY
 aPbK1jJ6oBCr43G02kXS
 =1uYH
 -----END PGP SIGNATURE-----

Merge tag 'please-pull-ucna' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras into x86/ras

Merge RAS updates from Tony Luck:

"Handle all uncorrected error reports in the same way (soft offline
 the page). We used to only do that for SRAO (software recoverable
 action optional) machine checks, but it makes sense to also do it
 for UCNA (UnCorrected No Action) logs found by CMCI or polling."
2014-11-21 15:31:35 +01:00
Will Deacon
7f73f7aef8 arm64: mm: report unhandled level-0 translation faults correctly
Translation faults that occur due to the input address being outside
of the address range mapped by the relevant base register are reported
as level 0 faults in ESR.DFSC.

If the faulting access cannot be resolved by the kernel (e.g. because
it is not mapped by a vma), then we report "input address range fault"
on the console. This was fine until we added support for 48-bit VAs,
which actually place PGDs at level 0 and can trigger faults for invalid
addresses that are within the range of the page tables.

This patch changes the string to report "level 0 translation fault",
which is far less confusing.

Signed-off-by: Will Deacon <will.deacon@arm.com>
2014-11-21 14:22:22 +00:00
Heikki Krogerus
b7bc15b98e phy: improved lookup method
Separates registration of the phy and the lookup. The method
is copied from clkdev.c,

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21 19:48:50 +05:30
Heikki Krogerus
d451057464 phy: safer to_phy() macro
This makes to_phy() macro work with other variable names
besides "dev".

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21 19:48:50 +05:30
Antoine Tenart
2f3fa3a0e5 Documentation: bindings: add doc for the Berlin USB PHY
Document the bindings of the Marvell Berlin USB PHY driver.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21 19:48:50 +05:30
Antoine Tenart
13ebb68cb5 phy: add the Berlin USB PHY driver
Add the driver driving the Marvell Berlin USB PHY. This allows to
initialize the PHY and to use it from the USB driver later.

Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-21 19:48:50 +05:30
Jussi Laako
d42472ecff ALSA: pcm: Add big-endian DSD sample formats and fix XMOS DSD sample format
This patch fixes XMOS DSD sample format to DSD_U32_BE and also adds
DSD_U16_BE and DSD_U32_BE sample formats.

Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Acked-by: Jurgen Kramer <gtmkramer@xs4all.nl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2014-11-21 15:13:28 +01:00
Rob Clark
d6ac4a84e7 drm/msm/mdp5: dpms(OFF) cleanups
When disabling the interface (INTF), the change doesn't latch until next
vblank, so we need to wait for vblank.

Also, to be pedantic, in the crtc, set all the mixer stages to unused.
It shouldn't really matter, since at this point we have already disabled
the INTF and waited for necessary vblank.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:59:24 -05:00
Rob Clark
ed8519636e drm/msm/mdp5: atomic
Convert mdp5 over to atomic helpers.  Extend/wrap drm_plane_state to
track plane zpos and to keep track of the needed when applying the
atomic update.  In mdp5's plane->atomic_check() we also need to check
for updates which require SMP reallocation, in order to trigger full
modeset.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:59:18 -05:00
Rob Clark
3e2f29e413 drm/msm: atomic fixes
Fixes for a couple little issues found in testing.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:57:22 -05:00
Rob Clark
32c0e3e24c drm/msm/mdp5: remove global mdp5_ctl_mgr
A bit cleaner.. and won't resulting in an attempt to kfree() a static
global in unload path.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:57:21 -05:00
Rob Clark
42238da8b1 drm/msm/mdp5: don't use void * for opaque types
For example, use 'struct mdp5_smp *' everywhere instead of 'void *', but
only declare it as 'struct mdp5_smp;' in common headers, so the struct
body is still private.  The accomplishes the desired modularity while
still letting the compiler provide some type checking for us.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:57:20 -05:00
Stephane Viau
0deed25b65 drm/msm: add multiple CRTC and overlay support
MDP5 currently support one single CRTC with its private pipe.
This change allows the configuration of multiple CRTCs with
the possibility to attach several public planes to these CRTCs.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:57:19 -05:00
Rob Clark
ac7a570406 drm/msm/mdp5: set rate before enabling clk
Set a "safe" rate at first, in order to read out the hw revision.  And
then after set the optimal value.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:57:18 -05:00
Stephane Viau
2e362e1772 drm/msm/mdp5: introduce mdp5_cfg module
The hardware configuration modification from a version to another
is quite consequent. Introducing a configuration module
(mdp5_cfg) may make things more clear and easier to access when a
new hardware version comes up.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:57:17 -05:00
Stephane Viau
bfcdfb0e62 drm/msm/mdp5: make SMP module dynamically configurable
The Shared Memory Pool (SMP) has its own limitation, features and
state. Some examples are:
 - the number of Memory Macro Block (MMB) and their size
 - the number of lines that can be fetched
 - the state of MMB currently allocated
 - the computation of number of blocks required per plane
 - client IDs ...

In order to avoid private data to be overwritten by other modules,
let's make these private to the SMP module.

Some of these depend on the hardware configuration, let's add them
to the mdp5_config struct.

In some hw configurations, some MMBs are statically tied to RGB
pipes and cannot be re-allocated dynamically. This change
introduces the concept of MMB static usage and makes sure that
dynamic MMB requests are dimensioned accordingly.

A note on passing a pipe pointer, instead of client IDs:
Client IDs are SMP-related information. Passing PIPE information
to SMP lets SMP module to find out which SMP client(s) are used.
This allows the SMP module to access the PIPE pointer, which can
be used for FIFO watermark configuration.
By the way, even though REG_MDP5_PIPE_REQPRIO_FIFO_WM_* registers
are part of the PIPE registers, their functionality is to reflect
the behavior of the SMP block. These registers access is now
restricted to the SMP module.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:57:16 -05:00
Rob Clark
d1a717bd27 drm/msm/hdmi: remove useless kref
A left-over from prior to component framework.  The original intent was
to deal with hdmi getting unloaded before the master component, but that
isn't really going to work anyways.  These days with the component
framework taking care to unload the master component first, we don't
have to worry about this.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:56:19 -05:00
Stephane Viau
3f307963fc drm/msm/mdp5: get the core clock rate from MDP5 config
The core clock rate depends on the hw configuration. Once we have
read the hardware revision, we can set the core clock to its
maximum value.
Before then, the clock is set at a rate supported by all MDP5
revisions.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:56:18 -05:00
Rob Clark
f6a8eaca0e drm/msm/mdp5: use irqdomains
For mdp5, the irqs of hdmi/eDP/dsi0/dsi1 blocks get routed through the
mdp block.  In order to decouple hdmi/eDP/etc, register an irq domain
in mdp5.  When hdmi/dsi/etc are used with mdp4, they can directly setup
their irqs in their DT nodes as normal.  When used with mdp5, instead
set the mdp device as the interrupt-parent, as in:

	mdp: qcom,mdss_mdp@fd900000 {
		compatible = "qcom,mdss_mdp";
		interrupt-controller;
		#interrupt-cells = <1>;
		...
	};

	hdmi: qcom,hdmi_tx@fd922100 {
		compatible = "qcom,hdmi-tx-8074";
		interrupt-parent = <&mdp>;
		interrupts = <8 0>;   /* MDP5_HW_INTR_STATUS.INTR_HDMI */
		...
	};

There is a slight awkwardness, in that we cannot disable child irqs
at the mdp level, they can only be cleared in the child block.  So
you must not use threaded irq handlers in the child.  I'm not sure
if there is a better way to deal with that.

Signed-off-by: Rob Clark <robdclark@gmail.com>
2014-11-21 08:56:18 -05:00
Javier Martinez Canillas
c645a598f9 ARM: EXYNOS: Call regulator core suspend prepare and finish functions
The regulator framework has a set of helpers functions to be used when
the system is entering and leaving from suspend but these are not called
on Exynos platforms. This means that the .set_suspend_* function handlers
defined by regulator drivers are not called when the system is suspended.

Suggested-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 22:49:47 +09:00
Abhilash Kesavan
adc548d77c ARM: EXYNOS: Use MCPM call-backs to support S2R on exynos5420
Use the MCPM layer to handle core suspend/resume on Exynos5420.
Also, restore the entry address setup code post-resume.

Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 22:49:46 +09:00
Vikas Sajjan
0fdf088fd8 ARM: EXYNOS: Add Suspend-to-RAM support for exynos5420
Adds Suspend-to-RAM support for EXYNOS5420

Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 22:49:46 +09:00
Abhilash Kesavan
af2e0a0754 ARM: EXYNOS: Add PMU support for exynos5420
Adds initial PMU settings for exynos5420. This is required for
future S2R and Switching support.

Signed-off-by: Thomas Abraham <thomas.ab@samsung.com>
Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com>
Signed-off-by: Vikas Sajjan <vikas.sajjan@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 22:49:45 +09:00
Pankaj Dubey
6b7bfd8292 ARM: EXYNOS: Move PMU specific definitions from common.h
This patch moves PMU specific definitions into a new file
as exynos-pmu.h.
This will help in reducing dependency of common.h in pmu.c.

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 22:49:44 +09:00
Pankaj Dubey
14fc8b93d4 ARM: EXYNOS: Add platform driver support for Exynos PMU
This patch modifies Exynos Power Management Unit (PMU) initialization
implementation in following way:

- Added platform driver support for Exynos PMU IP.
- Added platform struct exynos_pmu_data to hold platform specific data.
- For each SoC's PMU support now we can add platform data and statically
  bind PMU configuration and SoC specific initialization function.
- Separate each SoC's PMU initialization function and make it as part of
  platform data.
- It also removes uses of soc_is_exynosXYZ().

Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com>
Reviewed-by: Tomasz Figa <t.figa@samsung.com>
Tested-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 22:49:44 +09:00
Chanwoo Choi
c0adae9e51 ARM: EXYNOS: Add support for exynos4415 SoC
This patch adds support for Exynos4415 SoC. Exynos4415 is based on
the 32-bit RISC processor for Smartphone. Exynos4415 has Cortex A9
quad-cores and has a target speed of 1.6GHz and provides 8.5GB/s
memory bandwidth.

Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 22:49:43 +09:00
Kukjin Kim
b5d841a2bf Merge branch 'v3.19-next/non-critical-fixes' into v3.19-next/mach-exynos 2014-11-21 22:49:27 +09:00
Patrik Flykt
b0ad5e8b49 mac80211_hwsim: Send alpha2 only if non-zero
A properly set alpha2 value consists of two chars that both contain
letters or digits. If no value is set, both chars keep their initial
value zero. Therefore do not send the alpha2 parameter to user space
if either of the characters has been left at its initial zero value.

Signed-off-by: Patrik Flykt <patrik.flykt@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-21 14:18:01 +01:00
Javier Martinez Canillas
0788148935 ARM: exynos_defconfig: Enable max77802 rtc and clock drivers
Commit 6e80e3d875 ("ARM: exynos_defconfig: Enable MAX77802")
enabled support for the max77802 regulators but the PMIC also
has a Real-Time-Clock (RTC) and 2-channel 32kHz clock outputs.

Enable the kernel config options to have the drivers for these
devices built-in since they are present in many Exynos boards.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Acked-by: Kevin Hilman <khilman@linaro.org>
Tested-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2014-11-21 21:46:21 +09:00
Kukjin Kim
68847edc83 Merge branch 'v3.19-next/cleanup-samsung' into v3.19-next/mach-exynos 2014-11-21 21:40:23 +09:00
Arnd Bergmann
d1940cbd46 SoCFPGA DTS updates for v3.19
- Add DTS support for a new chip in the SOCFPGA family, the Arria 10.
 - Enable watchdog node.
 - Add SPI nodes.
 - Add the OCRAM node.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJUbslHAAoJEBmUBAuBoyj0R0EP/2nF0rHzM7s9TivfLLnknwu5
 UCPFkuB9DFsfBn6XauAjuioY2/K1yugU5Xh4IyKgXfOdUYDRxT18FzltJl8Tk25h
 yx7tm5DlukQ68sdKgcSNMXgH1VNR0zV0k0P1PBjdB2W78DGpQTi5KUDb29a6wk7a
 g7pYnhrzlKgLVfAazhxsD/N2o+ImxFvsVpdQBxi4/oR5zgYEoLbv6i4CKzPBrPv9
 T/v4MP9E9p8tviSpuj99plMZN8w4uBQ7Clc1xCrh8y+KvKRjViFnUZPXFZHnPENs
 XnqPuDyHvMxYEKQgrSDO5GQ4USUFM+TTSKGSobkCYYmaw53F+g6FxYTCDkubyCW/
 v9OAH5t3lQf3P8SyHdZ2hhGH4EAoTzxC7uYJes/JdjxZgBHpfZv/bj3MGMI6r+w8
 5rUF8ueipQjVOVJtr2YkkGM9U0CFw1dBGFBGk3eMrXPV418fcrIJZkRoDwdnvpQj
 I8sG1rEoZHAbPOu2ejyxVAlvHF5uy7HAXpt3ktekJV70DtcNTUpREbMso7fksEzL
 xufDmwe/BjUzJBFsVhZZLULUlHt1rZLYHXOn/NdfBEWluT4+uhc+1DcsCsc99Bhe
 AIUMX+ngDpWZazxRGhzlOxdzi9dhuN1pFtJlXuj2wBhVNdivac4OjgBgFYWu9lpZ
 cC/byWHasY2Kyyi1+tDd
 =sh1R
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_dts_updates_for_v3.19' of git://git.rocketboards.org/linux-socfpga-next into next/dt

Pull "SoCFPGA DTS updates for v3.19" from Dinh Nguyen:

- Add DTS support for a new chip in the SOCFPGA family, the Arria 10.
- Enable watchdog node.
- Add SPI nodes.
- Add the OCRAM node.

* tag 'socfpga_dts_updates_for_v3.19' of git://git.rocketboards.org/linux-socfpga-next:
  arm: dts: socfpga: Add a base DTSI for Altera's Arria10 SOC
  arm: dts: socfpga: enable watchdog for socfpga platform
  arm: dts: socfpga: Add SPI nodes to SOCFPGA DT.
  arm: dts: socfpga: Add OCRAM node

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 13:31:06 +01:00
Arnd Bergmann
3c6f4b154a Second Round of Renesas ARM Based SoC Cleanups for v3.19
* Spelling and grammar fixes
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUbovwAAoJENfPZGlqN0++69QP/iu/h2HZYc0L3f0iZt0aQAL5
 FXDVlhdDquprYjnaLX/HAymnxZf/TuCQIZY1B8UjdPV8DqvWllubV8DA9x22XsTY
 EsmP+acEzLqvPJEFzLvm9BFsNpHWDa1021zFU4x4WONLmqD5Ln2cninAOTkg5q4H
 ty68ij4okyxc6anemsQAPrZKdQFIhaokH1jzrbSHEtFEGd/WxzJkQtYtyMHp87Ep
 rn3Tkb1fFyaIPwl68smCsDcHeZDQG1UmC4NAWIJ+pPBS8vOKztkWneD0l0z5U2u5
 3I5+G3Mnk/HO9I3+UKVCbNsh+hJ2tQfbailUYBat3RcWTch8/nj2H2AmjAFE5vF7
 qTpCMQ7yIdvKuqJMvRrJudYFFSKGkJ/wrJ7gqZHk7FSfLx76IKswuZ4QkRXLKV+3
 nJF/bsh8YkoLOmNKFeNL128U63UGgL4xqwgDK+gIxr3r18+ACSxtZvTU5X0dbVDX
 XD3to32Yjy1tdeN9vYFbwVA7gDr7fUiwuYUGZyk9F84AglJVrBrcoAjaff2aK38K
 GBsG6xvIlP4t8xQc5eMFbDa5E8j5Py/bUS7dDri9P+j/7750M/t8BdfYj8ByC7rq
 lvb5BPTRY/86ks42tfRAATwqYQuMlIsiQifvBvN64hYaXSHVFHl/IKEJSabH2G5i
 dWl79XHEacH+Z2EDVo35
 =NxGD
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup

Pull "Second Round of Renesas ARM Based SoC Cleanups for v3.19" from Simon Horman:

* Spelling and grammar fixes

* tag 'renesas-soc-cleanups2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: r8a7779: Spelling/grammar s/entity/identity/, s/map/mapping/
  ARM: shmobile: sh7372: Spelling/grammar s/entity map/identity mapping/
  ARM: shmobile: sh73a0: Spelling/grammar s/entity map/identity mapping/

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 13:05:26 +01:00
Arnd Bergmann
6febbf472b Fourth Round of Renesas ARM Based SoC Updates for v3.19
* Add early debugging support using SCIF(A)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUboyIAAoJENfPZGlqN0++ACgQAIuqcxX1F5dayIeggtoFg4d9
 dG/YrZTZDRi5AcpXLgoMvt05Q908dDexwTxqSRjjahAil3xVVksjjU57dtKeV1a1
 YgsuXHn/7S3Ai97Fk+3KyOQ+SqJZpUATkjTNKpQDTYsdzHf6qSWgxOOXk1e76Ubi
 DYQb3iNQUUtSrjK9KmiwQ/qdKdb+mkW7F4gprykYBsiNBxbwV8ynwFt8VOE1IjiQ
 nevT28HTJMCyWjvQTLXD0kPodhD+Qx81wrer6zusZp/HEQprCap+QhaR6owGnCPX
 AQXmvSl4QaA5CqA4QWPOEW38gNzOnMAu3CZUplTWmm1+kp0avNj0jms4UCa3ufwc
 RkGmv/AUefbWxEE3ZDH21Cbem2vDN/Pk/cY/EcDweaAGBomPua4fH54YD3yzLoIL
 omPsmx/dp6Dr3THoyGCXJbPGsVBJHqYT19PLsubMaG6FcC2KH4ootb5riX2rQzOa
 ihkhaANOPgTALj13gNs1Gv0Fpl1h4Mp3O119ZTZSFz74RNS3qO4/B+/dpIBM3v+B
 dJxuRsHWluRSMRRo4CTXtZP4WstABwZvEBFmGjPJSm6eP+UmBTdIsXS2C8Q22/Dy
 AGKIhZBxt2wI+SzpLtgAD3i/3MzH3T3NXTMqpH8xrrP09ePwXGdOzP53q4A28OLX
 1L+BZGFNaoV3TRDzbhAq
 =O/9v
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Fourth Round of Renesas ARM Based SoC Updates for v3.19" from Simon Horman:

* Add early debugging support using SCIF(A)

* tag 'renesas-soc4-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Add early debugging support using SCIF(A)

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 13:04:06 +01:00
Arnd Bergmann
5ba3c24ca0 Second Round of Renesas ARM Based SoC DT Updates for v3.19
* Add labels for LEDs on kzm9g-reference and koelsch
 * Add Sound support to r8a7790/lager and r8a7791/koelsch
 * Add IIC DMA nodes to r8a7790 and r8a7791
 * Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
 * Add SGX, MMP and VSP1 clocks to r8a7794
 * Add USBDMAC{0,1} clocks to r8a7790 and r8a7791
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUbbZkAAoJENfPZGlqN0++A0gQAJ5bs24c0fRzIPXrkeIzY0aQ
 262nBv175LG8wihixOAJB/jiTPSpaZavlR+iXYq2iU+IqkkwIzFtdNs4q/ZMdppW
 J7LPUj0DwJe6+B8AYhSsSDDNW0P4avBXfU4rFXzLp2IkAqi/HdxJjB3/9C5Nzi7b
 mpsTvz3x4iP2NZdEKIDGtMBwtjghsfKBRaLsgNow+JdxLDLuWKWjaR8PMxvF1LFa
 Z/jz343PmFGCaWypq5HVyu+h3eNvh9HpOUleurGijXzoZl61U1SDceTygfbF+Ht2
 nNq8gqynokYWfmDQa8HJlPEmeCFhDtBHc9NNPJBEOCv7pWWdsXgfEYW5OepH+xzp
 FqfXM2DwKVMDcSL3LDwXYT1xZQfI8KUDg6ek5gXk8pDDpVhAb2ishEt+Vr3zEL+H
 uro9wruHl8lYujq9P4Jmh9icl2fMx3hXIoq3PVkzOkmJhViwSm55pqlAAVN72d4u
 xIthmwmvQ/zsvn5RwV3jmWUlwlYJmMz2gXqtsq+9NUy55yUMqjeSB9kchTzrM6SJ
 CzfiCl5j2SC6jiCNGsiFjI603kdIKq0uvaLQStEAHoWJkuf+jEWmfjV9qPptE+sa
 rPhIhWUXqs5Emw3DgQynIOy+szTWlg1hJl9MDF/SaeiyZ/dh/teqIoYhAjfqlCFS
 7etGw24D7YujpG9jlfC4
 =0cH9
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v3.19" from Simon Horman:

* Add labels for LEDs on kzm9g-reference and koelsch
* Add Sound support to r8a7790/lager and r8a7791/koelsch
* Add IIC DMA nodes to r8a7790 and r8a7791
* Use SoC-specific IIC compatible properties on sh73a0 and r8a73a4
* Add SGX, MMP and VSP1 clocks to r8a7794
* Add USBDMAC{0,1} clocks to r8a7790 and r8a7791

* tag 'renesas-dt2-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
  ARM: shmobile: r8a7791: add USBDMAC{0,1} clocks to device tree
  ARM: shmobile: r8a7790: add USBDMAC{0,1} clocks to device tree
  ARM: shmobile: r8a7794: Add MMP and VSP1 clocks to device tree
  ARM: shmobile: r8a7794: Add SGX clock to device tree
  ARM: shmobile: koelsch: add Volume Ramp usage on comment
  ARM: shmobile: lager: add Volume Ramp usage on comment
  ARM: shmobile: r8a7791: add DMA nodes for IIC
  ARM: shmobile: r8a7790: add DMA nodes for IIC
  ARM: shmobile: kzm9g-reference dts: Add labels for the LEDs
  ARM: shmobile: koelsch dts: Add labels for the LEDs
  ARM: shmobile: sh73a0 dtsi: Add SoC-specific IIC compatible properties
  ARM: shmobile: r8a73a4 dtsi: Add SoC-specific IIC compatible properties
  ARM: shmobile: koelsch: Sound DMA support via DVC on DTS
  ARM: shmobile: koelsch: Sound DMA support via SRC on DTS
  ARM: shmobile: koelsch: Sound DMA support via BUSIF on DTS
  ARM: shmobile: koelsch: Sound DMA support on DTS
  ARM: shmobile: koelsch: Sound PIO support on DTS
  ARM: shmobile: koelsch: fixup I2C2 clock frequency
  ARM: shmobile: lager: Sound DMA support via DVC on DTS
  ARM: shmobile: lager: Sound DMA support via SRC on DTS
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 13:02:08 +01:00
Arnd Bergmann
00f879bed4 Berlin SoC changes for v3.19 (round 2)
- Do not select RESET_CONTROLLER as it is user selectable
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUbmzlAAoJEN2kpao7fSL4Ur4P/Aoc7f8uuZk9qfdwC0UQ11sE
 Lt6QG++3H4a/IhxoyE0OBgrFs3rShQDZ4Jk3Du0Tvb7D3gqDL2TB1ouDi1b9xiLP
 qPatbIYHpIMRDbOAIibevqkH6iF9ZAn9gBMzBrPv1aiUjVz8WR6ubachJIa1LfEX
 KSZR895d0f+c+fjFUxMCNirnmr3fS/W/Stn33Qtxm8/fmoMsTkrDEkVrWkGSPh5J
 GwJrE+O1G8DNC5y1gc+kmRkX2iHfiTYchKMgnCnGC3FXTdHp3/yhkBdFD8aB2UH9
 94umJ9qVZAn/V8noxba7Lk2Vg3Qrky4kLxZt14QsGUWaI8Jmz9XdqCARD9m1dkeN
 Bb7X6JyQiImAbpRwlkzdaWP1jvEG4VG2SkI0p+8QSnmtef9C6Oj8M/Iunnjsvont
 RCpqhRKKWEDpKOiVwFQGrLw8oRSdrMy4PEIDJD1kgeAme308VEhi+sdh3MVu82hD
 xptJpHS2U9PpsAJTPBoUEy1FVHEM7THsyK7o7ICGZF7ZpWrw6YwD/imVC/5Ue+Uc
 jwnJMWNLPX/wSRHMcP89ThjgivUR/LtxfV2UVrioG9biz9jVxEMxwvZS3Tnh1JkO
 XL92wb3US090zFj12Di/x44Cn3GCQsRJpS3yHdCTzAf8DfzNm7Uey4+cuhB2h9dU
 Rl5riS0KQ7Etxbr+4hn/
 =M/Sw
 -----END PGP SIGNATURE-----

Merge tag 'berlin-soc-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin into next/soc

Pull "Berlin SoC changes for v3.19 (round 2)" from Sebastian Hesselbarth:

- Do not select RESET_CONTROLLER as it is user selectable

* tag 'berlin-soc-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: berlin: do not select RESET_CONTROLLER

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 12:59:18 +01:00
Arnd Bergmann
1bc7f27dee Berlin DT changes for v3.19 (round 2)
- AHCI and SATA PHY nodes for BG2
 - USB and USB PHZ nodes for BG2/BG2CD/BG2Q
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJUbm0pAAoJEN2kpao7fSL4RW8P/A+0U0qoj8FbBpDwiwhjADwG
 4327uzYbI+TG1fajJYxbDlMzvDNjRXb2yRb/eivgEoY7LsLR7Vbi1mwKsNAqH6+6
 n1RRtil1Rir4nILN2gnN911O24owGkvOUV4CN14uzDLR6K/smoaSYFcfFH6FS6Os
 NaYccrpobWCb4tZKjWPxo8FuknmTD+siUQmZRtazToWd9xiir7RhKwSrX8i/1jNp
 6vuhtn4L2nTZhycFjl1RZI6sZBOKtVBRD6yiuUSc6YjUPo+UEpaZdYQwcjOu906R
 c/99RgPa1ThN4OGYnGdco4grnSYU5hta0/xvVgaWXVDXie2Gg/gE3TCKzM6iWT2b
 EIWL8sCAOvHs8qTyknRukSGREPaTlcxMt+nogz6iD60+Dv//AJziJSqGnzGPDPSO
 Ud4hshdScwSGRZHfa0GRk3b2Y6P5F+gf2YuJuMcuWqz6kN5bbnQl3YvNYCiypvNH
 PWalrCaV8xS5UqN2JsRinJioUnVcGRBikfY/09xTLcweizZdXyoXjVvsNf7i5tPu
 XgyuXZob7uHwjJn6rQ2YsVeDQW/WPZ+df+da5Atq3xAnhAEuIgY74SPrRugdzdJQ
 r59v6YdSauMJdh5xJ1pNsaWDMJ7mGkv2E8txXOazWVWErfaI57lRwepXz99UgXBa
 RIUUPggoO/lrecw5c5mb
 =ZS1m
 -----END PGP SIGNATURE-----

Merge tag 'berlin-dt-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin into next/dt

Pull "Berlin DT changes for v3.19 (round 2)" from Sebastian Hesselbarth:

- AHCI and SATA PHY nodes for BG2
- USB and USB PHZ nodes for BG2/BG2CD/BG2Q

* tag 'berlin-dt-3.19-2' of git://git.infradead.org/users/hesselba/linux-berlin:
  ARM: dts: berlin: enable USB on the Google Chromecast
  ARM: dts: berlin: add BG2CD nodes for USB support
  ARM: dts: Berlin: enable USB on the BG2Q DMP
  ARM: dts: berlin: add BG2Q nodes for USB support
  ARM: berlin: Enable SATA on Sony NSZ-GS7
  ARM: berlin: Add AHCI and SATA PHY nodes to BG2

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 12:57:30 +01:00
Hauke Mehrtens
140bd60383 ARM: BCM5301X: fix early serial console
This device actually has a 8250 serial with a shift of 0.
Tested this on a BCM4708.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 12:34:54 +01:00
Florian Fainelli
2e8a29a1c9 bus: brcmstb_gisb: resolve section mismatch
Commit f1bee783dd moved the call to hook_fault_code in
brcmstb_gisb_arb_probe() which now calls a function annotated with __init, so
this one must also be annotated with __init.

In order to avoid introducing another section mismatch, call
platform_driver_probe() manually and remove the .probe assignment from
brcmstb_gisb_arb_driver, this is very similar to what
drivers/pci/host/pci-imx6.c does since we basically have the same constraints
here.

Fixes: f1bee783dd ("bus: brcmstb_gisb: register the fault code hook")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-21 12:32:43 +01:00