Snr returns value not correct. Fix it.
Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Check return status after each register access routine and avoid
masking return status values.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Previous patch changes used signal strength firmware register from
0x800048 to 0x80004a in case of AF9033/AF9035 chip. In practice
reported values were running upside-down, when RR strength increases
reported value decreases and vice versa. That is because of 0x80004a
returns values that are dBm scale, but negative RF strength dBm
returned as positive number.
0x800048 returns 0-100, like percentage
0x80004a returns 0-255 dBm, without a negative sign
So restore old measurement now.
Cc: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Register 0x800048 is not dB measure but relative scale. Fix it and conform to NorDig specifications.
Signed-off-by: Bimow Chen <Bimow.Chen@ite.com.tw>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
This converts the NVMe driver to a blk-mq request-based driver.
The NVMe driver is currently bio-based and implements queue logic within
itself. By using blk-mq, a lot of these responsibilities can be moved
and simplified.
The patch is divided into the following blocks:
* Per-command data and cmdid have been moved into the struct request
field. The cmdid_data can be retrieved using blk_mq_rq_to_pdu() and id
maintenance are now handled by blk-mq through the rq->tag field.
* The logic for splitting bio's has been moved into the blk-mq layer.
The driver instead notifies the block layer about limited gap support in
SG lists.
* blk-mq handles timeouts and is reimplemented within nvme_timeout().
This both includes abort handling and command cancelation.
* Assignment of nvme queues to CPUs are replaced with the blk-mq
version. The current blk-mq strategy is to assign the number of
mapped queues and CPUs to provide synergy, while the nvme driver
assign as many nvme hw queues as possible. This can be implemented in
blk-mq if needed.
* NVMe queues are merged with the tags structure of blk-mq.
* blk-mq takes care of setup/teardown of nvme queues and guards invalid
accesses. Therefore, RCU-usage for nvme queues can be removed.
* IO tracing and accounting are handled by blk-mq and therefore removed.
* Queue suspension logic is replaced with the logic from the block
layer.
Contributions in this patch from:
Sam Bradshaw <sbradshaw@micron.com>
Jens Axboe <axboe@fb.com>
Keith Busch <keith.busch@intel.com>
Robert Nelson <rlnelson@google.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Acked-by: Jens Axboe <axboe@fb.com>
Updated for new ->queue_rq() prototype.
Signed-off-by: Jens Axboe <axboe@fb.com>
Discard requests are often for very large ranges. The discard size is not
representative of the data transfer size so we don't need to allocate
for such a large prp list. This patch requests allocating only enough
for the memory needed for the data transfer and saves a little over 8k
of memory per max discard request.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reported-by: Paul Grabinar <paul.grabinar@ranbarg.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It is possible the block layer will request to open a block device after
the driver deleted it. Subsequent releases will cause a double free,
or the disk's private_data is pointing to freed memory. This patch
protects the driver's freed disks from being opened and accessed: the
nvme namespaces are freed only when the device's refcount is 0, so at
that moment there were no active openers and no more should be allowed,
and it is safe to clear the disk's private_data that is about to be freed.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reported-by: Henry Chow <henry.chow@oracle.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
It repeated "found a 'Silicon Labs Si2168' in warm state" everytime
when device was opened. Message is aimed to point out firmware is
downloaded, up and running. So print it only in case firmware download
is performed.
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
The nvme namespace request_queue's flags are initialized to
QUEUE_FLAG_DEFAULT, which currently sets QUEUE_FLAG_STACKABLE. The
device-mapper indicates this flag means the block driver is requset
based, though this driver is bio-based and problems will occur if an nvme
namespace is used with a request based dm device. This patch clears the
stackable flag.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If we ever do parallel device probing, we need to wake up all processes
waiting for nvme kthread to start, not just one. This is currently
serialized so the bug is not reachable today, but fixing this anyway in
the hopes we implement parallel or asynchronous probe in the future.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Updating commands and structures for NVMe 1.1 updates, mostly for nvme
reservations. There are no additional in-kernel uses, but this is for
the uapi.
While doing this, I noticed that the software progress features was
using the wrong value, so updating that value as well.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The NVME_IOCTL_SUBMIT_IO only works for IO commands with block data
transfers and isn't usable for other NVMe commands like flush,
data set management, or any sort of vendor unique command. The
NVME_IOCTL_ADMIN_CMD, however, can easily be modified to accept arbitrary
IO commands in addition to arbitrary admin commands without breaking
backward compatibility. This patch just adds a new IOCTL to distinguish
if the driver should submit the command on an IO or Admin queue.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This adds a callback to revalidate the disk and change its block size
and capacity if needed. Before, a user would have to remove + rescan
an entire device if they changed the logical block size using an NVMe
Format or other vendor specific command; now they can just run something
that issues the BLKRRPART IOCTL, like
# hdparm -z /dev/nvmeXnY
This can also be used in response to the 1.2 Spec's Namespace Attribute
Change asynchronous event.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We need to update the nvme queue's wait_queue_t entry during each
initialization since the nvme_thread may be ended and restarted when
the device is reset. If a device reset occurs during a large amount
of buffered IO, it would take a lot longer to complete the outstanding
requests due to the 1 second polling instead of waking up as completions
occur.
Fixes: b9afca3efb
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This returns a more appropriate error for the "capacity exceeded"
status. In case other NVMe statuses have a better errno, this patch adds
a convience function to translate an NVMe status code to an errno for
IO commands, defaulting to the current -EIO.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We've only been setting the sg_io_hdr status values on SCSI commands
that require an nvme command to complete the translation. The fields
in the struct are output parameters, so we have to set them, otherwise
user space will see whatever was in memory from before. In the case of
compat SG_IO, this would reveal kernel memory. This fixes the issue by
initializing the sg_io_hdr with successful status.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Acked-by: Vishal Verma <vishal.l.verma@linux.intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We can return -ENOIOCTLCMD and the ioctl will be handled by
fs/compat_ioctl.c instead. This removes a lot of duplicate code in the
nvme driver.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If an nvme device is removed but user space has an open reference,
the nvme driver would have been holding an invalid reference to its pci
device. You may get a general protection fault on x86 h/w when the driver
uses that reference in dma_map_sg(), as is done in nvme_map_user_pages()
from the IOCTL interface.
This patch fixes the fault by taking a reference on the pci device and
holding it even after device removal until all opens on the nvme device
are closed.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reported-by: Nilesh Choudhury <nilesh.choudhury@oracle.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The use of "rcu_assign_pointer()" is NULLing out the pointer.
According to RCU_INIT_POINTER()'s block comment:
"1. This use of RCU_INIT_POINTER() is NULLing out the pointer"
it is better to use it instead of rcu_assign_pointer() because it has a
smaller overhead.
The following Coccinelle semantic patch was used:
@@
@@
- rcu_assign_pointer
+ RCU_INIT_POINTER
(..., NULL)
Signed-off-by: Andreea-Cristina Bernat <bernat.ada@gmail.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
nvme_submit_io_cmd() uses smp_processor_id() to pick an IO queue index.
This patch fixes the case where there are more cpus from which the ioctl
call can originate than online queues, which can happen when a device
supports or was allocated fewer interrupt vectors than exist cpu cores.
Thanks to Keith Busch for the implementation suggestion.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This changes the order of deleting the gendisks so it happens after the
nvme IO queues are freed. If a device is removed while a filesystem has
associated dirty data, the removal will wait on these to complete before
proceeding from del_gendisk, which could have caused deadlock before.
The implication of this is that an orderly removal of a responsive
device won't necessarily wait for dirty data to be written, but we are
not guaranteed the device is even going to respond at this point either.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Rather than relying on call_rcu, this patch directly frees the
nvme_queue's memory after ensuring no readers exist. Some arch specific
dma_free_coherent implementations may not be called from a call_rcu's
soft interrupt context, hence the change.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reported-by: Matthew Minter <matthew_minter@xyratex.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The current implementation hard-codes the shutdown timeout to 2 seconds.
Some devices take longer than this to complete a normal shutdown.
Changing the shutdown timeout to a module parameter with a default
timeout of 5 seconds.
Signed-off-by: Dan McLeran <daniel.mcleran@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Rather than skipping shutdown only for devices that have been removed,
skip the orderly shutdown on failed devices to avoid the long timeout
handling that inevitably happens when deleting queues on such a device.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Race conditions are theoretically possible between the NVMe PCI device
removal and the generic PCI bus rescan and device removal that can be
triggered via sysfs.
To avoid those race conditions make the NVMe code use
pci_stop_and_remove_bus_device_locked().
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is a minor refactor for handling devices that are incapable of IO.
The driver previously used special error codes to know that IO queues
are unavailable, but we have an online queue count now.
This also fixes an issue where the driver successfully sets the queue
count, but either is unable to allocate an IO queue or the device can't
create one for some reason.
If the driver can successfully enable the device and get responses to
admin commands, the driver will bring up a character device for managment
but not create block devices.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Change the behavior of nvme_enable_ctrl to set EN.
Clear CC.SH for both nvme_enable_ctrl and nvme_disable_ctrl.
Remove reading of the CC register and manage the state in
dev->ctrl_config.
Signed-off-by: Dan McLeran <daniel.mcleran@intel.com>
[removed an unwanted write to CC]
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Adds support for devices with max page size smaller than the host's.
In the case we encounter such a host/device combination, the driver will
split a page into as many PRP entries as necessary for the device's page
size capabilities. If the device's reported minimum page size is greater
than the host's, the driver will not attempt to enable the device and
return an error instead.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Submits NVMe asynchronous event requests, one event up to the controller
maximum or number of possible different event types (8), whichever is
smaller. Events successfully returned by the controller are logged.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Use the zeroing function instead of dma_alloc_coherent & memset(,0,)
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Matthew Wilcox <matthew.r.wilcox@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
else is unnecessary after return 0 in __udp4_lib_rcv()
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
remove __inline__ / inline and let compiler decide what to do
with static functions
Inspired-by: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
In addtion expand the table to handle other values of sysclk. Instead
of making the table 3D, expand it to a more descriptive struct. The
divisors are specified in Table 19 of the 98090 data sheet version
0p94.
The dmic frequency was previously assumed. Instead make it explicit
and configurable through device tree. This now handles independently
set pclk and dmic frequency.
Based on downstream work by Ralph Birt.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
The Baytrail-based chromebooks have a 20MHz mclk, the code was setting
the divisor incorrectly in this case. According to the 98090
datasheet, the divisor should be set to DIV1 for 10 <= mclk <= 20.
Correct this and the surrounding clock ranges as well to match the
datasheet.
Signed-off-by: Dylan Reid <dgreid@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull thermal fixes from Eduardo Valentin:
"Specifics:
- a few code fixes improving the Exynos code base. They remove dead
and unreachable code. No functional changes here
- in Exynos code base, fixes regarding the right usage of features
(TRIMINFO and TRIMRELOAD)
- documentation of RCAR thermal
- fix in the of-thermal, regarding the proper usage of of-APIs
- fixes on thermal-core, removal of unreachable code"
[ Eduardo is sending the thermal fixes on behalf of Rui Zhang this time.
Rui is currently unable to send pull requests due to troubles with his
machine and he's currently in a business trip ]
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/evalenti/linux-soc-thermal:
Thermal:Remove usless if(!result) before return tz
thermal: exynos: fix IRQ clearing on TMU initialization
thermal: fix multiple disbalanced device node counters
thermal: rcar: Add binding docs for new R-Car Gen2 SoCs
thermal: exynos: Add support for TRIM_RELOAD feature at Exynos3250
thermal: exynos: Add support for many TRIMINFO_CTRL registers
thermal: samsung: Exynos5260 and Exynos5420 should not use TRIM_RELOAD flag
thermal: exynos: remove identical values from exynos*_tmu_registers structures
thermal: exynos: remove redundant pdata checks from exynos_tmu_control()
thermal: exynos: cache non_hw_trigger_levels in pdata
thermal: exynos: simplify temp_to_code() and code_to_temp()
thermal: exynos: remove redundant threshold_code checks from exynos_tmu_initialize()
thermal: exynos: remove redundant pdata checks from exynos_tmu_initialize()
thermal: exynos: remove dead code for HW_MODE calibration
thermal: exynos: remove unused struct exynos_tmu_registers entries
In order to describe a single slave device that has no chip select line
the 'num-chipselects' property has to be <0> and the 'cs-gpios' property
doesn't need to be set.
Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Quirks and DMI match additions.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUWHINAAoJEKbMaAwKp364uGUH/jfm+247uKXYGUy/FfbpxGNt
3RQwswAWmg/3urVmMeIQhQntc/rMXwPh0knhyrCXgL9ZdCCTfJQ1ChT67mPoVcEN
moJq82RrRwq5jKPYgoj4iVSBvyMY1c4Ydht/9jyzhHIUE7ro4P8lOEKw6BCFCctm
l32zi4rqt3o5ES2IMV9vRW76Y4Z47ijgHKvi2mWwjgva75aGlaPm6IDoU1qpaMG0
wDVcwvV66YeELon5Uh8gLQzBLZy5ctMTyCALwiLF89I3BZw9/OBy+gLxDaLq8jCW
8ZBKqM7+2ZQd6kc3Tgi1jygdpFTfWaDtof9AsdzeqRYljP3ZCI4AUU2sjbZ1jvY=
=WJnO
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v3.18-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
Pull x86 platform drievr updates from Darren Hart:
"A short list of patches applying quirks and new DMI matches. These
pass my basic build tests and have spent 4 days in linux-next"
* tag 'platform-drivers-x86-v3.18-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
quirk for Lenovo Yoga 3: no rfkill switch
acer-wmi: Add acpi_backlight=video quirk for the Acer KAV80
samsung-laptop: Add broken-acpi-video quirk for NC210/NC110
asus-nb-wmi: Add wapf4 quirk for the X550VB
toshiba_acpi: Add Toshiba TECRA A50-A to the alt keymap dmi list
Observing that per-CPU data (in the SMP case) is reachable by
exploiting 64-bit address wraparound (building on the default kernel
load address being at 16Mb), the one byte shorter RIP-relative
addressing form can be used for most per-CPU accesses. The one
exception are the "stable" reads, where the use of the "P" operand
modifier prevents the compiler from using RIP-relative addressing, but
is unavoidable due to the use of the "p" constraint (side note: with
gcc 4.9.x the intended effect of this isn't being achieved anymore,
see gcc bug 63637).
With the dependency on the minimum kernel load address, arbitrarily
low values for CONFIG_PHYSICAL_START are now no longer possible. A
link time assertion is being added, directing to the need to increase
that value when it triggers.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/5458A1780200007800044A9D@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes if you please"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux:
powerpc: use device_online/offline() instead of cpu_up/down()
powerpc/powernv: Properly fix LPC debugfs endianness
powerpc: do_notify_resume can be called with bad thread_info flags argument
powerpc/fadump: Fix endianess issues in firmware assisted dump handling
powerpc: Fix section mismatch warning