Fix reset-resume handling which failed to resubmit the read and
interrupt URBs, thereby leaving a port that was open before suspend in a
broken state until closed and reopened.
Fixes: 1ded7ea47b ("USB: ch341 serial: fix port number changed after
resume")
Fixes: 2bfd1c96a9 ("USB: serial: ch341: remove reset_resume callback")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Make sure to stop the interrupt URB before returning on errors during
open.
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The modem-control signals are managed by the tty-layer during open and
should not be asserted prematurely when set_termios is called from
driver open.
Also make sure that the signals are asserted only when changing speed
from B0.
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
The private baud_rate variable is used to configure the port at open and
reset-resume and must never be set to (and left at) zero or reset-resume
and all further open attempts will fail.
Fixes: aa91def41a ("USB: ch341: set tty baud speed according to tty
struct")
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
DTR and RTS will be asserted by the tty-layer when the port is opened
and deasserted on close (if HUPCL is set). Make sure the initial state
is not-asserted before the port is first opened as well.
Fixes: 664d5df92e ("USB: usb-serial ch341: support for DTR/RTS/CTS")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Checks on the operand to VMXON are performed after the check for
legacy mode operation and the #GP checks, according to the pseudo-code
in Intel's SDM.
Signed-off-by: Jim Mattson <jmattson@google.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
On interrupt delivery the PPR can only grow (except for auto-EOI),
so it is impossible that non-auto-EOI interrupt delivery results
in KVM_REQ_EVENT. We can therefore use __apic_update_ppr.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On PPR update, we set KVM_REQ_EVENT unconditionally anytime PPR is lowered.
But we can take into account IRR here already.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
PPR needs to be updated whenever on every IRR read because we
may have missed TPR writes that _increased_ PPR. However, these
writes need not generate KVM_REQ_EVENT, because either KVM_REQ_EVENT
has been set already in __apic_accept_irq, or we are going to
process the interrupt right away.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Since we're already in VCPU context, all we have to do here is recompute
the PPR value. That will in turn generate a KVM_REQ_EVENT if necessary.
Reviewed-by: Roman Kagan <rkagan@virtuozzo.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This statistic can be useful to estimate the cost of an IRQ injection
scenario, by comparing it with irq_injections. For example the stat
shows that sti;hlt triggers more KVM_REQ_EVENT than sti;nop.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When a guest causes a NPF which requires emulation, KVM sometimes walks
the guest page tables to translate the GVA to a GPA. This is unnecessary
most of the time on AMD hardware since the hardware provides the GPA in
EXITINFO2.
The only exception cases involve string operations involving rep or
operations that use two memory locations. With rep, the GPA will only be
the value of the initial NPF and with dual memory locations we won't know
which memory address was translated into EXITINFO2.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
LAPIC after reset is in xAPIC mode, which poses a problem for hotplug of
VCPUs with high APIC ID, because reset VCPU is waiting for INIT/SIPI,
but there is no way to uniquely address it using xAPIC.
From many possible options, we chose the one that also works on real
hardware: accepting interrupts addressed to LAPIC's x2APIC ID even in
xAPIC mode.
KVM intentionally differs from real hardware, because real hardware
(Knights Landing) does just "x2apic_id & 0xff" to decide whether to
accept the interrupt in xAPIC mode and it can deliver one interrupt to
more than one physical destination, e.g. 0x123 to 0x123 and 0x23.
Fixes: 682f732ecf ("KVM: x86: bump MAX_VCPUS to 288")
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Slow path tried to prevent IPIs from x2APIC VCPUs from being delivered
to xAPIC VCPUs and vice-versa. Make slow path behave like fast path,
which never distinguished that.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
There were three calls sites:
- recalculate_apic_map and kvm_apic_match_physical_addr, where it would
only complicate implementation of x2APIC hotplug;
- in apic_debug, where it was still somewhat preserved, but keeping the
old function just for apic_debug was not worth it
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Interrupt to self can be sent without knowing the APIC ID.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a brief description of the lockless access tracking mechanism
to the documentation of fast page faults in locking.txt.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change implements lockless access tracking for Intel CPUs without EPT
A bits. This is achieved by marking the PTEs as not-present (but not
completely clearing them) when clear_flush_young() is called after marking
the pages as accessed. When an EPT Violation is generated as a result of
the VM accessing those pages, the PTEs are restored to their original values.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
MMIO SPTEs currently set both bits 62 and 63 to distinguish them as special
PTEs. However, bit 63 is used as the SVE bit in Intel EPT PTEs. The SVE bit
is ignored for misconfigured PTEs but not necessarily for not-Present PTEs.
Since MMIO SPTEs use an EPT misconfiguration, so using bit 63 for them is
acceptable. However, the upcoming fast access tracking feature adds another
type of special tracking PTE, which uses not-Present PTEs and hence should
not set bit 63.
In order to use common bits to distinguish both type of special PTEs, we
now use only bit 62 as the special bit.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
mmu_spte_update() tracks changes in the accessed/dirty state of
the SPTE being updated and calls kvm_set_pfn_accessed/dirty
appropriately. However, in some cases (e.g. when aging the SPTE),
this shouldn't be done. mmu_spte_update_no_track() is introduced
for use in such cases.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This simplifies mmu_spte_update() a little bit.
The checks for clearing of accessed and dirty bits are refactored into
separate functions, which are used inside both mmu_spte_update() and
mmu_spte_clear_track_bits(), as well as kvm_test_age_rmapp(). The new
helper functions handle both the case when A/D bits are supported in
hardware and the case when they are not.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change adds retries into the Fast Page Fault path. Without the
retries, the code still works, but if a retry does end up being needed,
then it will result in a second page fault for the same memory access,
which will cause much more overhead compared to just retrying within the
original fault.
This would be especially useful with the upcoming fast access tracking
change, as that would make it more likely for retries to be needed
(e.g. due to read and write faults happening on different CPUs at
the same time).
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change renames spte_is_locklessly_modifiable() to
spte_can_locklessly_be_made_writable() to distinguish it from other
forms of lockless modifications. The full set of lockless modifications
is covered by spte_has_volatile_bits().
Signed-off-by: Junaid Shahid <junaids@google.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This change adds some symbolic constants for VM Exit Qualifications
related to EPT Violations and updates handle_ept_violation() to use
these constants instead of hard-coded numbers.
Signed-off-by: Junaid Shahid <junaids@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When using two-dimensional paging, the mmu_page_hash (which provides
lookups for existing kvm_mmu_page structs), becomes imbalanced; with
too many collisions in buckets 0 and 512. This has been seen to cause
mmu_lock to be held for multiple milliseconds in kvm_mmu_get_page on
VMs with a large amount of RAM mapped with 4K pages.
The current hash function uses the lower 10 bits of gfn to index into
mmu_page_hash. When doing shadow paging, gfn is the address of the
guest page table being shadow. These tables are 4K-aligned, which
makes the low bits of gfn a good hash. However, with two-dimensional
paging, no guest page tables are being shadowed, so gfn is the base
address that is mapped by the table. Thus page tables (level=1) have
a 2MB aligned gfn, page directories (level=2) have a 1GB aligned gfn,
etc. This means hashes will only differ in their 10th bit.
hash_64() provides a better hash. For example, on a VM with ~200G
(99458 direct=1 kvm_mmu_page structs):
hash max_mmu_page_hash_collisions
--------------------------------------------
low 10 bits 49847
hash_64 105
perfect 97
While we're changing the hash, increase the table size by 4x to better
support large VMs (further reduces number of collisions in 200G VM to
29).
Note that hash_64() does not provide a good distribution prior to commit
ef703f49a6 ("Eliminate bad hash multipliers from hash_32() and
hash_64()").
Signed-off-by: David Matlack <dmatlack@google.com>
Change-Id: I5aa6b13c834722813c6cca46b8b1ed6f53368ade
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Report the maximum number of mmu_page_hash collisions as a per-VM stat.
This will make it easy to identify problems with the mmu_page_hash in
the future.
Signed-off-by: David Matlack <dmatlack@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The check in kvm_set_pic_irq() and kvm_set_ioapic_irq() was just a
temporary measure until the code improved enough for us to do this.
This changes APIC in a case when KVM_SET_GSI_ROUTING is called to set up pic
and ioapic routes before KVM_CREATE_IRQCHIP. Those rules would get overwritten
by KVM_CREATE_IRQCHIP at best, so it is pointless to allow it. Userspaces
hopefully noticed that things don't work if they do that and don't do that.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We don't treat kvm->arch.vpic specially anymore, so the setup can look
like ioapic. This gets a bit more information out of return values.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
irqchip_in_kernel() tried to save a bit by reusing pic_irqchip(), but it
just complicated the code.
Add a separate state for the irqchip mode.
Reviewed-by: David Hildenbrand <david@redhat.com>
[Used Paolo's version of condition in irqchip_in_kernel().]
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Split irqchip cannot be created after creating the kernel irqchip, but
we forgot to restrict the other way. This is an API change.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ADC driver depends on REGULATOR and IIO that are not yet selected.
Current hardware boards (like stm32f429i-eval) is using fixed
regulators.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Convert to devm_ioremap_resource() which provides more consistent error
handling.
Note that devm_ioremap_resource() provides its own error messages.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This enables the pwm-beeper module. This is used by the speaker on LEGO
MINDSTORMS EV3.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Requesting a DMA channel might be a time consuming operation, so there is
no need to acquire and release DMA channel for each SPI transfer.
DMA channels can be requested during driver probe and kept all the time,
also because there are no shared nor dynamically allocated channels on
Samsung S3C/S5P/Exynos platforms.
While moving dma_requrest_slave_channel calls, lets switch to
dma_request_slave_channel_reason(), which returns error codes on failure,
which can be properly propagated to the caller (this for example defers
SPI probe when DMA controller is not yet available).
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Andi Shyti <andi.shyti@samsung.com>
Tested-by: Andi Shyti <andi.shyti@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Disconnect or deauthenticate when the owning socket is closed if this
flag is supplied to CMD_CONNECT or CMD_ASSOCIATE. This may be used
to ensure userspace daemon doesn't leave an unmanaged connection behind.
In some situations it would be possible to account for that, to some
degree, in the deamon restart code or in the up/down scripts without
the use of this attribute. But there will be systems where the daemon
can go away for varying periods without a warning due to local resource
management.
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ilan reported that sometimes nl80211 messages weren't working if
the frames being transported got very large, which was really a
problem for userspace-to-kernel messages, but prompted me to look
at the code.
Upon review, I found various places where variable-length data is
transported in an nl80211 message but the message isn't allocated
taking that into account. This shouldn't cause any problems since
the frames aren't really that long, apart in one place where two
(possibly very long frames) might not fit.
Fix all the places (that I found) that get variable length data
from the driver and put it into a message to take the length of
the variable data into account. The 100 there is just a safe
constant for the remaining message overhead (it's usually around
50 for most messages.)
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sample size of 24 bits use in reality 32 bits for storage. We
can safelly enable this sample size and treat the data as
32 bits.
Tested in a x86_64 platform and in ARC AXS101 SDP platform.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Up until now PIO mode offered only playback support. With
this patch we add support for record mode. The PCM was
refactored so that we could reuse the existing infrastructure
without many changes.
We have support for 16 and 32 bits of sample size using
only 2 channels.
Tested in a x86_64 platform and in ARC AXS101 SDP platform.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The default capless power mode is low voltage mode. We should set
it to high voltage mode to get fair headphone performance.
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The i2s clock pre-divider 1 is used for both i2s1 and sysclk.
The i2s1 is usually used for the main i2s and the pre-divider
will be set in hw_params function.
However, if i2s2 is used, the pre-divider is not set in the hw_params
function and the default value of i2s clock pre-divider 1 is too high
for sysclk and DMIC usage. Fix by overriding default divider value to 2.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=95681
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of using device name it was suggested that bus number was more
appropriate to differentiate debugfs names. Also reduce buffer size to
more realistic 32 bytes instead of 128.
When request_irq is called the bus number may not be assigned. Therefore
the irq name was not unique when dynamic bus number was being used.
As per most of the spi drivers use the device name instead. No other
use of dws->name could be found so it was removed.
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Mark Brown <broonie@kernel.org>
We should go to 'err_put_master' here instead of returning directly.
Otherwise a call to 'spi_master_put' is missing.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
A static checker warning occurs in the AFS filesystem:
fs/afs/cmservice.c:155 SRXAFSCB_CallBack()
error: dereferencing freed memory 'call'
due to the reply being sent before we access the server it points to. The
act of sending the reply causes the call to be freed if an error occurs
(but not if it doesn't).
On top of this, the lifetime handling of afs_call structs is fragile
because they get passed around through workqueues without any sort of
refcounting.
Deal with the issues by:
(1) Fix the maybe/maybe not nature of the reply sending functions with
regards to whether they release the call struct.
(2) Refcount the afs_call struct and sort out places that need to get/put
references.
(3) Pass a ref through the work queue and release (or pass on) that ref in
the work function. Care has to be taken because a work queue may
already own a ref to the call.
(4) Do the cleaning up in the put function only.
(5) Simplify module cleanup by always incrementing afs_outstanding_calls
whenever a call is allocated.
(6) Set the backlog to 0 with kernel_listen() at the beginning of the
process of closing the socket to prevent new incoming calls from
occurring and to remove the contribution of preallocated calls from
afs_outstanding_calls before we wait on it.
A tracepoint is also added to monitor the afs_call refcount and lifetime.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: 08e0e7c82e: "[AF_RXRPC]: Make the in-kernel AFS filesystem use AF_RXRPC."
Allow listen() with a backlog of 0 to be used to disable listening on an
AF_RXRPC socket. This also releases any preallocation, thereby making it
easier for a kernel service to account for all allocated call structures
when shutting down the service.
The socket cannot thereafter have listening reenabled, but must rather be
closed and reopened.
Signed-off-by: David Howells <dhowells@redhat.com>
The afs_wait_mode struct isn't really necessary. Client calls only use one
of a choice of two (synchronous or the asynchronous) and incoming calls
don't use the wait at all. Replace with a boolean parameter.
Signed-off-by: David Howells <dhowells@redhat.com>
Add the missing declarations of basic string functions to string.h to allow
a clean build.
Fixes: 5be8656615 ("String-handling functions for the new x86 setup code.")
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Link: http://lkml.kernel.org/r/1483781911-21399-1-git-send-email-hofrat@osadl.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
