This patch changes MLMESendFrame to return NETDEV_TX_BUSY if MLME frame is in
use so that wbsoft_tx() doesn't blindly return NETDEV_TX_OK in that case.
Cc: Sandro Bonazzola <sandro.bonazzola@gmail.com>
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes unused fields from "struct wbsoft_priv".
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes unused spinlocks from "struct mlme_frame" and "struct
wbsoft_priv".
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The mlme_s.h header is included in one place. As the header is very small, just
inline it to core.h.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
There's bunch of macros in mlme_s.h that aren't used for anything. Kill them
off.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The scan_s.h header is not actually used for anything so just kill it off.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch removes remaining typedef declarations from the w35und driver. Most
of them were unused so I just killed them off completely.
Cc: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixes an uninitialized variable access in _rx_iq_calibration_loop_winbond():
CC [M] drivers/staging/winbond/phy_calibration.o
drivers/staging/winbond/phy_calibration.c: In function ‘_rx_iq_calibration_loop_winbond’:
drivers/staging/winbond/phy_calibration.c:1138: warning: ‘val’ is used uninitialized in this function
Cc: Lars Lindley <lindley@coyote.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Make sure we stay within the cache boundaries when updating the
register cache.
Signed-off-by: Dimitris Papastamos <dp@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
rtd->dev.init_name is set twice in soc_probe_dai_link. I removed the first
assignement from dai_link->stream_name since then there won't be sysfs name
changes and usually dai_link->name seems to fit anyway better for a sysfs
directory name.
Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Also remove no unused precision attr.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This has been replaced by a separate _index attribute
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also fixes a missing NULL to terminate one of the attribute arrays.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As Manuel Stahl observed, putting data into the naming of an attribute
(beyond what it is for) breaks the one value per attribute rule (in spirit
at least). Hence we introduce a separate _index attribute for each scan
element to tell userspace the ordering in output from the buffer.
This will generate a lot of sparse warnings as all drivers will have unused
iio_const_attrs created. The rest of the set will clean these up.
The final patch will remove the old indexing method. It is not here so
as to maintain one or other interface for all devices as this set
progresses.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The job this was intended to do (never implemented) is now done
by explicit definition of _type attributes in all drivers
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The bit depth of 14 for the supply adc on the datasheet is highly
suspicious. Confirmation requested from Analog.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Note some of the in driver type specifications do not match the
data sheet. I am assuming the datasheet is correct. This bug
would not have been apparent in the driver as these values were
unusued.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
As both signed and unsigned in attributes exist, each element must
be fully specified.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Also, adds a macro to make defining such attributes simple.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch to the existing bcm80211 directory in the staging tree adds fullmac
driver support for the BCM4329 SDIO chip from Broadcom. Configuration of the
mac80211 driver or the fullmac driver can be done through menuconfig.
Signed-off-by: Henry Ptasinski <henryp@broadcom.com>
Signed-off-by: Nohee Ko <noheek@broadcom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
earlyprintk can take and I/O port, so we need to handle this case in
the setup code too, otherwise 0x3f8 will be treated as a baud rate.
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C7B05A6.4010801@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Torsten reported that there is garbage output,
after commit 8fee13a48e (x86,
setup: enable early console output from the decompressor)
It turns out we missed the offset for that case.
Reported-by: Torsten Kaiser <just.for.lkml@googlemail.com>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C7B0578.8090807@kernel.org>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
The dma request line attribute was named dma channel, which leads
to confusion with the real dma channel definition.
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Tested-by: Kevin Hilman <khilman@deeprootsystems.com>
Change the usage of svc usecnt during command execution:
- we check if svc is registered but we do not need to hold usecnt
reference while under __ip_vs_mutex, only the packet handling needs
it during scheduling
- change __ip_vs_service_get to __ip_vs_service_find and
__ip_vs_svc_fwm_get to __ip_vs_svc_fwm_find because now caller
will increase svc->usecnt
- put common code that calls update_service in __ip_vs_update_dest
- put common code in ip_vs_unlink_service() and use it to unregister
the service
- add comment that svc should not be accessed after ip_vs_del_service
anymore
- all IP_VS_WAIT_WHILE calls are now unified: usecnt > 0
- Properly log the app ports
As result, some problems are fixed:
- possible use-after-free of svc in ip_vs_genl_set_cmd after
ip_vs_del_service because our usecnt reference does not guarantee that
svc is not freed on refcnt==0, eg. when no dests are moved to trash
- possible usecnt leak in do_ip_vs_set_ctl after ip_vs_del_service
when the service is not freed now, for example, when some
destionations are moved into trash and svc->refcnt remains above 0.
It is harmless because svc is not in hash anymore.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Since we don't change the tuple in the original direction, we can save it
in ct->tuplehash[IP_CT_DIR_REPLY].hnode.pprev for __nf_conntrack_confirm()
use.
__hash_conntrack() is split into two steps: hash_conntrack_raw() is used
to get the raw hash, and __hash_bucket() is used to get the bucket id.
In SYN-flood case, early_drop() doesn't need to recompute the hash again.
Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
We've applied a fix-up for ALC269 VAIO only for two models. But all
Sony VAIO models with ALC269 codec seem to require the similar fix.
Let's apply it with vendor-id mask.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add new sysctl flag "snat_reroute". Recent kernels use
ip_route_me_harder() to route LVS-NAT responses properly by
VIP when there are multiple paths to client. But setups
that do not have alternative default routes can skip this
routing lookup by using snat_reroute=0.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Add more code to IPVS to work with Netfilter connection
tracking and fix some problems.
- Allow IPVS to be compiled without connection tracking as in
2.6.35 and before. This can avoid keeping conntracks for all
IPVS connections because this costs memory. ip_vs_ftp still
depends on connection tracking and NAT as implemented for 2.6.36.
- Add sysctl var "conntrack" to enable connection tracking for
all IPVS connections. For loaded IPVS directors it needs
tuning of nf_conntrack_max limit.
- Add IP_VS_CONN_F_NFCT connection flag to request the connection
to use connection tracking. This allows user space to provide this
flag, for example, in dest->conn_flags. This can be useful to
request connection tracking per real server instead of forcing it
for all connections with the "conntrack" sysctl. This flag is
set currently only by ip_vs_ftp and of course by "conntrack" sysctl.
- Add ip_vs_nfct.c file to hold all connection tracking code,
by this way main code should not depend of netfilter conntrack
support.
- Return back the ip_vs_post_routing handler as in 2.6.35 and use
skb->ipvs_property=1 to allow IPVS to work without connection
tracking
Connection tracking:
- most of the code is already in 2.6.36-rc
- alter conntrack reply tuple for LVS-NAT connections when first packet
from client is forwarded and conntrack state is NEW or RELATED.
Additionally, alter reply for RELATED connections from real server,
again for packet in original direction.
- add IP_VS_XMIT_TUNNEL to confirm conntrack (without altering
reply) for LVS-TUN early because we want to call nf_reset. It is
needed because we add IPIP header and the original conntrack
should be preserved, not destroyed. The transmitted IPIP packets
can reuse same conntrack, so we do not set skb->ipvs_property.
- try to destroy conntrack when the IPVS connection is destroyed.
It is not fatal if conntrack disappears before that, it depends
on the used timers.
Fix problems from long time:
- add skb->ip_summed = CHECKSUM_NONE for the LVS-TUN transmitters
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Patrick McHardy <kaber@trash.net>
ath9k can use minstrel_ht instead, so it makes sense to save some space here.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
It is not used anywhere else and can be made static
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The tid aggregation cleanup is a bit fragile, as it discards failed
subframes in some places, and retransmits them in others. This could
block the cleanup of an existing aggregation session, if a retransmission
for a tid is issued, yet the tid is never scheduled again because of
the cleanup state.
Fix this by getting rid of as many subframes as possible, as early
as possible, and immediately transmitting pending subframes as regular
HT frames instead of waiting for the cleanup to complete.
Drop all pending subframes while keeping track of the Block ACK window
during aggregate tx completion to prevent sending out stale subframes,
which could confuse the receiver side.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
A new aggregation session start can be issued by mac80211, even when the
cleanup of the previous session has not completed yet. Since the data structure
for the session is not recreated, this could corrupt the block ack window
and lock up the aggregation session. Fix this by delaying the new session
until the old one has been cleaned up.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>
There's no reason to keep pointers to pending tx buffers around, if they're
only used to keep track of which frames are still pending. Use a bitfield
instead.
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
typo - while looking for specific bits we should do a bitwise-AND instead of logical-AND.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Acked-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
copy the rx_status directly to skb->cb (control buffer) instead of copying
it to a local struct and then copying it again (for each rx packet)
Signed-off-by: Eliad Peller <eliad@wizery.com>
Acked-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>