commit a63c357b9f upstream.
When commit 82612d66d5 ("iommu: Allow the dma-iommu api to
use bounce buffers") was introduced, it did not add the logic
for tracing the bounce buffer usage from iommu_dma_map_page().
All of the users of swiotlb_tbl_map_single() trace their bounce
buffer usage, except iommu_dma_map_page(). This makes it difficult
to track SWIOTLB usage from that function. Thus, trace bounce buffer
usage from iommu_dma_map_page().
Fixes: 82612d66d5 ("iommu: Allow the dma-iommu api to use bounce buffers")
Cc: stable@vger.kernel.org # v5.15+
Cc: Tom Murphy <murphyt7@tcd.ie>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Saravana Kannan <saravanak@google.com>
Signed-off-by: Isaac J. Manjarres <isaacmanjarres@google.com>
Link: https://lore.kernel.org/r/20231208234141.2356157-1-isaacmanjarres@google.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit afc95681c3 upstream.
In some cases the firmware expects cbndx 1 to be assigned to the GMU,
so we also want the default domain for the GMU to be an identy domain.
This way it does not get a context bank assigned. Without this, both
of_dma_configure() and drm/msm's iommu_domain_attach() will trigger
allocating and configuring a context bank. So GMU ends up attached to
both cbndx 1 and later cbndx 2. This arrangement seemingly confounds
and surprises the firmware if the GPU later triggers a translation
fault, resulting (on sc8280xp / lenovo x13s, at least) in the SMMU
getting wedged and the GPU stuck without memory access.
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/20231210180655.75542-1-robdclark@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31e97d7c9a upstream.
This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10
driver. This improves the readability and more importantly, for the
solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13):
- the preprocessed size from 121 MiB to 4.5 MiB;
- the build CPU time from 46.8 s to 1.6 s;
- the build memory from 2786 MiB to 98MiB.
In fine, this allows this relatively simple C file to be built on a
32-bit system.
Reported-by: Jiri Slaby <jirislaby@gmail.com>
Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/
Cc: <stable@vger.kernel.org> # v6.7+
Suggested-by: David Laight <David.Laight@ACULAB.COM>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: David Laight <David.Laight@ACULAB.COM>
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 715d82ba63 upstream.
The following case can cause a crash due to missing attach_btf:
1) load rawtp program
2) load fentry program with rawtp as target_fd
3) create tracing link for fentry program with target_fd = 0
4) repeat 3
In the end we have:
- prog->aux->dst_trampoline == NULL
- tgt_prog == NULL (because we did not provide target_fd to link_create)
- prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X)
- the program was loaded for tgt_prog but we have no way to find out which one
BUG: kernel NULL pointer dereference, address: 0000000000000058
Call Trace:
<TASK>
? __die+0x20/0x70
? page_fault_oops+0x15b/0x430
? fixup_exception+0x22/0x330
? exc_page_fault+0x6f/0x170
? asm_exc_page_fault+0x22/0x30
? bpf_tracing_prog_attach+0x279/0x560
? btf_obj_id+0x5/0x10
bpf_tracing_prog_attach+0x439/0x560
__sys_bpf+0x1cf4/0x2de0
__x64_sys_bpf+0x1c/0x30
do_syscall_64+0x41/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Return -EINVAL in this situation.
Fixes: f3a9507554 ("bpf: Allow trampoline re-attach for tracing and lsm programs")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Song Liu <song@kernel.org>
Signed-off-by: Dmitrii Dolgov <9erthalion6@gmail.com>
Link: https://lore.kernel.org/r/20240103190559.14750-4-9erthalion6@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit da9065caa5 upstream.
In min_key_size_set():
if (val > hdev->le_max_key_size || val < SMP_MIN_ENC_KEY_SIZE)
return -EINVAL;
hci_dev_lock(hdev);
hdev->le_min_key_size = val;
hci_dev_unlock(hdev);
In max_key_size_set():
if (val > SMP_MAX_ENC_KEY_SIZE || val < hdev->le_min_key_size)
return -EINVAL;
hci_dev_lock(hdev);
hdev->le_max_key_size = val;
hci_dev_unlock(hdev);
The atomicity violation occurs due to concurrent execution of set_min and
set_max funcs.Consider a scenario where setmin writes a new, valid 'min'
value, and concurrently, setmax writes a value that is greater than the
old 'min' but smaller than the new 'min'. In this case, setmax might check
against the old 'min' value (before acquiring the lock) but write its
value after the 'min' has been updated by setmin. This leads to a
situation where the 'max' value ends up being smaller than the 'min'
value, which is an inconsistency.
This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 5.17.
To resolve this issue, it is suggested to encompass the validity checks
within the locked sections in both set_min and set_max funcs. The
modification ensures that the validation of 'val' against the
current min/max values is atomic, thus maintaining the integrity of the
settings. With this patch applied, our tool no longer reports the bug,
with the kernel configuration allyesconfig for x86_64. Due to the lack of
associated hardware, we cannot test the patch in runtime testing, and just
verify it according to the code logic.
[1] https://sites.google.com/view/basscheck/
Fixes: 18f81241b7 ("Bluetooth: Move {min,max}_key_size debugfs ...")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 21528c69a0 upstream.
Documentation/filesystems/ramfs-rootfs-initramfs.rst states:
If CONFIG_TMPFS is enabled, rootfs will use tmpfs instead of ramfs by
default. To force ramfs, add "rootfstype=ramfs" to the kernel command
line.
This currently does not work when root= is provided since then
saved_root_name contains a string and rootfstype= is ignored. Therefore,
ramfs is currently always chosen when root= is provided.
The current behavior for rootfs's filesystem is:
root= | rootfstype= | chosen rootfs filesystem
------------+-------------+--------------------------
unspecified | unspecified | tmpfs
unspecified | tmpfs | tmpfs
unspecified | ramfs | ramfs
provided | ignored | ramfs
rootfstype= should be respected regardless whether root= is given,
as shown below:
root= | rootfstype= | chosen rootfs filesystem
------------+-------------+--------------------------
unspecified | unspecified | tmpfs (as before)
unspecified | tmpfs | tmpfs (as before)
unspecified | ramfs | ramfs (as before)
provided | unspecified | ramfs (compatibility with before)
provided | tmpfs | tmpfs (new)
provided | ramfs | ramfs (new)
This table represents the new behavior.
Fixes: 6e19eded36 ("initmpfs: use initramfs if rootfstype= or root= specified")
Cc: <stable@vger.kernel.org>
Signed-off-by: Rob Landley <rob@landley.net>
Link: https://lore.kernel.org/lkml/8244c75f-445e-b15b-9dbf-266e7ca666e2@landley.net/
Reviewed-and-Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/r/20231120011248.396012-1-stefanb@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7dab24554d upstream.
Use the type blk_opf_t for read and write operations instead of int. This
patch does not affect the generated code but fixes the following sparse
warning:
drivers/md/raid1.c:1993:60: sparse: sparse: incorrect type in argument 5 (different base types)
expected restricted blk_opf_t [usertype] opf
got int rw
Cc: Song Liu <song@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Fixes: 3c5e514db5 ("md/raid1: Use the new blk_opf_t type")
Cc: stable@vger.kernel.org # v6.0+
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401080657.UjFnvQgX-lkp@intel.com/
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240108001223.23835-1-bvanassche@acm.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9320fc509b upstream.
dev_err_probe() is only supposed to be used in probe functions. While it
probably doesn't hurt, both the EPROBE_DEFER handling and calling
device_set_deferred_probe_reason() are conceptually wrong in the request
callback. So replace the call by dev_err() and a separate return
statement.
This effectively reverts commit c0bfe9606e ("pwm: jz4740: Simplify
with dev_err_probe()").
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240106141302.1253365-2-u.kleine-koenig@pengutronix.de
Fixes: c0bfe9606e ("pwm: jz4740: Simplify with dev_err_probe()")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1db244ffd upstream.
When deactivating the catch-all set element, check the state in the next
generation that represents this transaction.
This bug uncovered after the recent removal of the element busy mark
a2dd0233cb ("netfilter: nf_tables: remove busy mark and gc batch API").
Fixes: aaa31047a6 ("netfilter: nftables: add catch-all set element support")
Cc: stable@vger.kernel.org
Reported-by: lonial con <kongln9170@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1b151e2435 upstream.
The special casing was originally added in pre-git history; reproducing
the commit log here:
> commit a318a92567d77
> Author: Andrew Morton <akpm@osdl.org>
> Date: Sun Sep 21 01:42:22 2003 -0700
>
> [PATCH] Speed up direct-io hugetlbpage handling
>
> This patch short-circuits all the direct-io page dirtying logic for
> higher-order pages. Without this, we pointlessly bounce BIOs up to
> keventd all the time.
In the last twenty years, compound pages have become used for more than
just hugetlb. Rewrite these functions to operate on folios instead
of pages and remove the special case for hugetlbfs; I don't think
it's needed any more (and if it is, we can put it back in as a call
to folio_test_hugetlb()).
This was found by inspection; as far as I can tell, this bug can lead
to pages used as the destination of a direct I/O read not being marked
as dirty. If those pages are then reclaimed by the MM without being
dirtied for some other reason, they won't be written out. Then when
they're faulted back in, they will not contain the data they should.
It'll take a pretty unusual setup to produce this problem with several
races all going the wrong way.
This problem predates the folio work; it could for example have been
triggered by mmaping a THP in tmpfs and using that as the target of an
O_DIRECT read.
Fixes: 800d8c63b2 ("shmem: add huge pages support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6f64f866aa upstream.
Before calling add partition or resize partition, there is no check
on whether the length is aligned with the logical block size.
If the logical block size of the disk is larger than 512 bytes,
then the partition size maybe not the multiple of the logical block size,
and when the last sector is read, bio_truncate() will adjust the bio size,
resulting in an IO error if the size of the read command is smaller than
the logical block size.If integrity data is supported, this will also
result in a null pointer dereference when calling bio_integrity_free.
Cc: <stable@vger.kernel.org>
Signed-off-by: Min Li <min15.li@samsung.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230629142517.121241-1-min15.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bd1f6a31e7 upstream.
When dGPU is put into BOCO it may be in D3cold but still able send
PME on display hotplug event. For this to work it must be enabled
as wake source from D3.
When runpm is enabled use pci_wake_from_d3() to mark wakeup as
enabled by default.
Cc: stable@vger.kernel.org # 6.1+
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9cfe7e7f9 upstream.
Commit cf1b6d4441 ("md: simplify md_seq_ops") introduce following
regressions:
1) If list all_mddevs is emptly, personalities and unused devices won't
be showed to user anymore.
2) If seq_file buffer overflowed from md_seq_show(), then md_seq_start()
will be called again, hence personalities will be showed to user
again.
3) If seq_file buffer overflowed from md_seq_stop(), seq_read_iter()
doesn't handle this, hence unused devices won't be showed to user.
Fix above problems by printing personalities and unused devices in
md_seq_show().
Fixes: cf1b6d4441 ("md: simplify md_seq_ops")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240109133957.2975272-1-yukuai1@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f8fb3f3914 upstream.
If a controller reset is underway or the controller is in an unrecoverable
state, the PEL enable management command will be returned as EAGAIN or
EFAULT.
Cc: <stable@vger.kernel.org> # v6.1+
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231126053134.10133-4-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c01d515687 upstream.
After a controller reset, if the firmware changes the state of devices to
"hide", then remove those devices from the OS.
Cc: <stable@vger.kernel.org> # v6.6+
Co-developed-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Sathya Prakash <sathya.prakash@broadcom.com>
Signed-off-by: Chandrakanth patil <chandrakanth.patil@broadcom.com>
Link: https://lore.kernel.org/r/20231126053134.10133-3-chandrakanth.patil@broadcom.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0db1d53937 upstream.
The callers of vfs_iter_write() are required to hold file_start_write().
file_start_write() is a no-op for the S_ISBLK() case, but it is really
needed when the backing file is a regular file.
We are going to move file_{start,end}_write() into vfs_iter_write(), but
we need to fix this first, so that the fix could be backported to stable
kernels.
Suggested-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/ZV8ETIpM+wZa33B5@infradead.org/
Cc: <stable@vger.kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://lore.kernel.org/r/20231123092000.2665902-1-amir73il@gmail.com
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33cd6ea9c0 upstream.
When framebuffer gets closed, the queued deferred IO gets cancelled. This
can cause some last display data to vanish. This is problematic for users
who send a still image to the framebuffer, then close the file: the image
may never appear.
To ensure none of display data get lost, flush the queued deferred IO
first before closing.
Another possible solution is to delete the cancel_delayed_work_sync()
instead. The difference is that the display may appear some time after
closing. However, the clearing of page mapping after this needs to be
removed too, because the page mapping is used by the deferred work. It is
not completely obvious whether it is okay to not clear the page mapping.
For a patch intended for stable trees, go with the simple and obvious
solution.
Fixes: 60b59beafb ("fbdev: mm: Deferred IO support")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 15e4c1f462 upstream.
The driver's fsync() is supposed to flush any pending operation to
hardware. It is implemented in this driver by cancelling the queued
deferred IO first, then schedule it for "immediate execution" by calling
schedule_delayed_work() again with delay=0. However, setting delay=0
only means the work is scheduled immediately, it does not mean the work
is executed immediately. There is no guarantee that the work is finished
after schedule_delayed_work() returns. After this driver's fsync()
returns, there can still be pending work. Furthermore, if close() is
called by users immediately after fsync(), the pending work gets
cancelled and fsync() may do nothing.
To ensure that the deferred IO completes, use flush_delayed_work()
instead. Write operations to this driver either write to the device
directly, or invoke schedule_delayed_work(); so by flushing the
workqueue, it can be guaranteed that all previous writes make it to the
device.
Fixes: 5e841b88d2 ("fb: fsync() method for deferred I/O flush.")
Cc: stable@vger.kernel.org
Signed-off-by: Nam Cao <namcao@linutronix.de>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b48807788e upstream.
Fix build by using the correct name for the initializer macro
for struct fb_ops.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 9037afde8b ("fbdev/acornfb: Use fbdev I/O helpers")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org> # v6.6+
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231127131655.4020-2-tzimmermann@suse.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ff1407e24 upstream.
A previous commit added an earlier break condition here, which is fine if
we're using non-local task_work as it'll be run on return to userspace.
However, if DEFER_TASKRUN is used, then we could be leaving local
task_work that is ready to process in the ctx list until next time that
we enter the kernel to wait for events.
Move the break condition to _after_ we have run task_work.
Cc: stable@vger.kernel.org
Fixes: 846072f16e ("io_uring: mimimise io_cqring_wait_schedule")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0a535eddbe upstream.
If IOSQE_ASYNC is set and we fail importing an iovec for a readv or
writev request, then we leave ->bytes_done uninitialized and hence the
eventual failure CQE posted can potentially have a random res value
rather than the expected -EINVAL.
Setup ->bytes_done before potentially failing, so we have a consistent
value if we fail the request early.
Cc: stable@vger.kernel.org
Reported-by: xingwei lee <xrivendell7@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9b43ef3d52 upstream.
IOPOLL request should never return IOU_OK, so the following iopoll
queueing check in io_issue_sqe() after getting IOU_OK doesn't make any
sense as would never turn true. Let's optimise on that and return a bit
earlier. It's also much more resilient to potential bugs from
mischieving iopoll implementations.
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2f8690e2fa5213a2ff292fac29a7143c036cdd60.1701390926.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c239665130 upstream.
There has been a lingering bug in LoongArch Linux systems causing some
GCC tests to intermittently fail (see Closes link). I've made a minimal
reproducer:
zsh% cat measure.s
.align 4
.globl _start
_start:
movfcsr2gr $a0, $fcsr0
bstrpick.w $a0, $a0, 16, 16
beqz $a0, .ok
break 0
.ok:
li.w $a7, 93
syscall 0
zsh% cc mesaure.s -o measure -nostdlib
zsh% echo $((1.0/3))
0.33333333333333331
zsh% while ./measure; do ; done
This while loop should not stop as POSIX is clear that execve must set
fenv to the default, where FCSR should be zero. But in fact it will
just stop after running for a while (normally less than 30 seconds).
Note that "$((1.0/3))" is needed to reproduce this issue because it
raises FE_INVALID and makes fcsr0 non-zero.
The problem is we are currently relying on SET_PERSONALITY2() to reset
current->thread.fpu.fcsr. But SET_PERSONALITY2() is executed before
start_thread which calls lose_fpu(0). We can see if kernel preempt is
enabled, we may switch to another thread after SET_PERSONALITY2() but
before lose_fpu(0). Then bad thing happens: during the thread switch
the value of the fcsr0 register is stored into current->thread.fpu.fcsr,
making it dirty again.
The issue can be fixed by setting current->thread.fpu.fcsr after
lose_fpu(0) because lose_fpu() clears TIF_USEDFPU, then the thread
switch won't touch current->thread.fpu.fcsr.
The only other architecture setting FCSR in SET_PERSONALITY2() is MIPS.
I've ran a similar test on MIPS with mainline kernel and it turns out
MIPS is buggy, too. Anyway MIPS do this for supporting different FP
flavors (NaN encodings, etc.) which do not exist on LoongArch. So for
LoongArch, we can simply remove the current->thread.fpu.fcsr setting
from SET_PERSONALITY2() and do it in start_thread(), after lose_fpu(0).
The while loop failing with the mainline kernel has survived one hour
after this change on LoongArch.
Fixes: 803b0fc5c3 ("LoongArch: Add process management")
Closes: https://github.com/loongson-community/discussions/issues/7
Link: https://lore.kernel.org/linux-mips/7a6aa1bbdbbe2e63ae96ff163fab0349f58f1b9e.camel@xry111.site/
Cc: stable@vger.kernel.org
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c896d6bc3 upstream.
The kconfig options for filesystems that support FS_ENCRYPTION are
supposed to select FS_ENCRYPTION_ALGS. This is needed to ensure that
required crypto algorithms get enabled as loadable modules or builtin as
is appropriate for the set of enabled filesystems. Do this for CEPH_FS
so that there aren't any missing algorithms if someone happens to have
CEPH_FS as their only enabled filesystem that supports encryption.
Cc: stable@vger.kernel.org
Fixes: f061feda6c ("ceph: add fscrypt ioctls and ceph.fscrypt.auth vxattr")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Xiubo Li <xiubli@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77bebd1864 upstream.
When smb2 leases is disable, ksmbd can send oplock break notification
and cause wait oplock break ack timeout. It may appear like hang when
accessing a directory. This patch make only v2 leases handle the
directory.
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 38d20c6290 upstream.
The race is between the handling of a new TCP connection and
its disconnection. It leads to UAF on `struct tcp_transport` in
ksmbd_tcp_new_connection() function.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22991
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92e470163d upstream.
If client send invalid mech token in session setup request, ksmbd
validate and make the error if it is invalid.
Cc: stable@vger.kernel.org
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-22890
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb3c007fde upstream.
Lenovo M70 Gen5 is equipped with ALC623, and it needs
ALC283_FIXUP_HEADSET_MIC quirk to make its headset mic work.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240117154123.21578-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b018cee736 upstream.
On some HP ZBooks, the audio LEDs can be enabled by
ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF. So use it accordingly.
Signed-off-by: Yo-Jung Lin <leo.lin@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240116020722.27236-1-leo.lin@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc7863d186 upstream.
This HP Laptop uses ALC236 codec with COEF 0x07 idx 1 controlling
the mute LED. This patch enables the already existing quirk for
this device.
Signed-off-by: Çağhan Demir <caghandemir@marun.edu.tr>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240115172303.4718-1-caghandemir@marun.edu.tr
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a03cfad512 upstream.
There was a typo in oxygen mixer code that didn't update the right
channel value properly for the capture volume. Let's fix it.
This trivial fix was originally reported on Bugzilla.
Fixes: a360156049 ("[ALSA] oxygen: add front panel controls")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=156561
Link: https://lore.kernel.org/r/20240112111023.6208-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51f93776b8 upstream.
The drivers RS485 support is deactivated if there is no RTS GPIO available.
This is done by nullifying the ports rs485_supported struct. After that
however the settings in serial_omap_rs485_supported are assigned to the
same structure unconditionally, which results in an unintended reactivation
of RS485 support.
Fix this by moving the assignment to the beginning of
serial_omap_probe_rs485() and thus before uart_get_rs485_mode() gets
called.
Also replace the assignment of rs485_config() to have the complete RS485
setup in one function.
Fixes: e2752ae3cf ("serial: omap: Disallow RS-485 if rts-gpio is not specified")
Cc: <stable@vger.kernel.org>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240103061818.564-7-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c2a5f471c upstream.
The UART supports an auto-RTS mode in which the RTS pin is automatically
activated during transmission. So mark this mode as being supported even
if RTS is not controlled by the driver but the UART.
Also the serial core expects now at least one of both modes rts-on-send or
rts-after-send to be supported. This is since during sanitization
unsupported flags are deleted from a RS485 configuration set by userspace.
However if the configuration ends up with both flags unset, the core prints
a warning since it considers such a configuration invalid (see
uart_sanitize_serial_rs485()).
Cc: <stable@vger.kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-8-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c45eaa813 upstream.
There are register accesses in the function imx_uart_rs485_config(). The
clock must be enabled for these accesses. This was ensured by calling it
via the function uart_rs485_config() in the probe() function within the
range where the clock is enabled. With the commit 7c7f9bc986 ("serial:
Deassert Transmit Enable on probe in driver-specific way") it was removed
from the probe() function and is now only called through the function
uart_add_one_port() which is located at the end of the probe() function.
But the clock is already switched off in this area. To ensure that the
clock is enabled during register access, move the disabling of the clock
to the very end of the probe() function. To avoid leaking enabled clocks
on error also add an error path for exiting with disabling the clock.
Fixes: 7c7f9bc986 ("serial: Deassert Transmit Enable on probe in driver-specific way")
Cc: stable <stable@kernel.org>
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/20231226113647.39376-1-cniedermaier@dh-electronics.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74eab89b26 upstream.
If the imx driver cannot support RS485 it nullifies the ports
rs485_supported structure. But it still calls uart_get_rs485_mode() which
may set the RS485_ENABLED flag nevertheless.
This may lead to an attempt to configure RS485 even if it is not supported
when the flag is evaluated in uart_configure_port() at port startup.
Avoid this by bailing out of uart_get_rs485_mode() if the RS485_ENABLED
flag is not supported by the caller.
With this fix a check for RTS availability is now obsolete in the imx
driver, since it can not evaluate to true any more. So remove this check.
Furthermore the explicit nullifcation of rs485_supported is not needed,
since the memory has already been set to zeros at allocation. So remove
this, too.
Fixes: 00d7a00e2a ("serial: imx: Fill in rs485_supported")
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Suggested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20240103061818.564-6-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1a33e33ca0 upstream.
If the RS485 feature RX-during-TX is supported by means of a GPIO set the
according supported flag. Otherwise setting this feature from userspace may
not be possible, since in uart_sanitize_serial_rs485() the passed RS485
configuration is matched against the supported features and unsupported
settings are thereby removed and thus take no effect.
Cc: <stable@vger.kernel.org>
Fixes: 163f080eb7 ("serial: core: Add option to output RS485 RX_DURING_TX state via GPIO")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-3-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c73986913f upstream.
Some uart drivers specify a rs485_config() function and then decide later
to disable RS485 support for some reason (e.g. imx and ar933).
In these cases userspace may be able to activate RS485 via TIOCSRS485
nevertheless, since in uart_set_rs485_config() an existing rs485_config()
function indicates that RS485 is supported.
Make sure that this is not longer possible by checking the uarts
rs485_supported.flags instead and bailing out if SER_RS485_ENABLED is not
set.
Furthermore instead of returning an empty structure return -ENOTTY if the
RS485 configuration is requested via TIOCGRS485 but RS485 is not supported.
This has a small impact on userspace visibility but it is consistent with
the -ENOTTY error for TIOCGRS485.
Fixes: e849145e1f ("serial: ar933x: Fill in rs485_supported")
Fixes: 55e18c6b6d ("serial: imx: Remove serial_rs485 sanitization")
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-5-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4afeced55b upstream.
Among other things uart_sanitize_serial_rs485() tests the sanity of the RTS
settings in a RS485 configuration that has been passed by userspace.
If RTS-on-send and RTS-after-send are both set or unset the configuration
is adjusted and RTS-after-send is disabled and RTS-on-send enabled.
This however makes only sense if both RTS modes are actually supported by
the driver.
With commit be2e2cb1d2 ("serial: Sanitize rs485_struct") the code does
take the driver support into account but only checks if one of both RTS
modes are supported. This may lead to the errorneous result of RTS-on-send
being set even if only RTS-after-send is supported.
Fix this by changing the implemented logic: First clear all unsupported
flags in the RS485 configuration, then adjust an invalid RTS setting by
taking into account which RTS mode is supported.
Cc: <stable@vger.kernel.org>
Fixes: be2e2cb1d2 ("serial: Sanitize rs485_struct")
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-4-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07c30ea586 upstream.
Both the imx and stm32 driver set the rx-during-tx GPIO in rs485_config().
Since this function is called with the port lock held, this can be a
problem in case that setting the GPIO line can sleep (e.g. if a GPIO
expander is used which is connected via SPI or I2C).
Avoid this issue by moving the GPIO setting outside of the port lock into
the serial core and thus making it a generic feature.
Also with commit c54d485436 ("serial: stm32: Add support for rs485
RX_DURING_TX output GPIO") the SER_RS485_RX_DURING_TX flag is only set if a
rx-during-tx GPIO is _not_ available, which is wrong. Fix this, too.
Furthermore reset old GPIO settings in case that changing the RS485
configuration failed.
Fixes: c54d485436 ("serial: stm32: Add support for rs485 RX_DURING_TX output GPIO")
Fixes: ca530cfa96 ("serial: imx: Add support for RS485 RX_DURING_TX output GPIO")
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Lino Sanfilippo <l.sanfilippo@kunbus.com>
Link: https://lore.kernel.org/r/20240103061818.564-2-l.sanfilippo@kunbus.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2dd23cc4d0 upstream.
In mon_bin_vma_fault():
offset = vmf->pgoff << PAGE_SHIFT;
if (offset >= rp->b_size)
return VM_FAULT_SIGBUS;
chunk_idx = offset / CHUNK_SIZE;
pageptr = rp->b_vec[chunk_idx].pg;
The code is executed without holding any lock.
In mon_bin_vma_close():
spin_lock_irqsave(&rp->b_lock, flags);
rp->mmap_active--;
spin_unlock_irqrestore(&rp->b_lock, flags);
In mon_bin_ioctl():
spin_lock_irqsave(&rp->b_lock, flags);
if (rp->mmap_active) {
...
} else {
...
kfree(rp->b_vec);
rp->b_vec = vec;
rp->b_size = size;
...
}
spin_unlock_irqrestore(&rp->b_lock, flags);
Concurrent execution of mon_bin_vma_fault() with mon_bin_vma_close() and
mon_bin_ioctl() could lead to atomicity violations. mon_bin_vma_fault()
accesses rp->b_size and rp->b_vec without locking, risking array
out-of-bounds access or use-after-free bugs due to possible modifications
in mon_bin_ioctl().
This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 6.2.
To address this issue, it is proposed to add a spin lock pair in
mon_bin_vma_fault() to ensure atomicity. With this patch applied, our tool
never reports the possible bug, with the kernel configuration allyesconfig
for x86_64. Due to the lack of associated hardware, we cannot test the
patch in runtime testing, and just verify it according to the code logic.
[1] https://sites.google.com/view/basscheck/
Fixes: 19e6317d24 ("usb: mon: Fix a deadlock in usbmon between ...")
Cc: <stable@vger.kernel.org>
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Link: https://lore.kernel.org/r/20240105052412.9377-1-2045gemini@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5962ded777 upstream.
When typec_altmode_put_partner is called by a plug altmode upon release,
the port altmode the plug belongs to will not remove its reference to the
plug. The check to see if the altmode being released is a plug evaluates
against the released altmode's partner instead of the calling altmode, so
change adev in typec_altmode_put_partner to properly refer to the altmode
being released.
Because typec_altmode_set_partner calls get_device() on the port altmode,
add partner_adev that points to the port altmode in typec_put_partner to
call put_device() on. typec_altmode_set_partner is not called for port
altmodes, so add a check in typec_altmode_release to prevent
typec_altmode_put_partner() calls on port altmode release.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Cc: <stable@vger.kernel.org>
Co-developed-by: Christian A. Ehrhardt <lk@c--e.de>
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Tested-by: Christian A. Ehrhardt <lk@c--e.de>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240103181754.2492492-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40c304109e upstream.
Supposed DMA cross 4k bounder problem should be fixed at DEV_VER_V2, but
still met problem when do ISO transfer if sg enabled.
Data pattern likes below when sg enabled, package size is 1k and mult is 2
[UVC Header(8B) ] [data(3k - 8)] ...
The received data at offset 0xd000 will get 0xc000 data, len 0x70. Error
happen position as below pattern:
0xd000: wrong
0xe000: wrong
0xf000: correct
0x10000: wrong
0x11000: wrong
0x12000: correct
...
To avoid DMA cross 4k bounder at ISO transfer, reduce burst len according
to start DMA address's alignment.
Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231224153816.1664687-4-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 92f02efa1d upstream.
ISO basic transfer is
ITP(SOF) Package_0 Package_1 ... Package_n
CDNS3 DMA start dma transfer from memmory to internal FIFO when get SOF,
controller will transfer data to usb bus from internal FIFO when get IN
token.
According USB spec defination:
Maximum number of packets = (bMaxBurst + 1) * (Mult + 1)
Internal memory should be the same as (bMaxBurst + 1) * (Mult + 1). DMA
don't fetch data advance when ISO transfer, so only reserve
(bMaxBurst + 1) * (Mult + 1) internal memory for ISO transfer.
Need save Mult and bMaxBurst information and set it into EP_CFG register,
otherwise only 1 package is sent by controller, other package will be
lost.
Cc: <stable@vger.kernel.org>
Fixes: 7733f6c32e ("usb: cdns3: Add Cadence USB3 DRD Driver")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20231224153816.1664687-3-Frank.Li@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
