sync_file_debug_add() and sync_file_debug_remove() have been unused
since 2016's
commit d4cab38e15 ("staging/android: prepare sync_file for de-staging")
Remove them.
Since sync_file_debug_add was the only thing to add to
sync_file_list_head, the code that dumps it in part of
sync_info_debugfs_show can be removed, and the declaration of
the list and it's associated lock can be removed.
(The 'fences:\n...' marker in that debugfs file is left in
so as not to change the output)
That leaves the sync_print_sync_file() helper unused, and
is thus removed.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250505233838.105668-1-linux@treblig.org
In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae4 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com
The of_get_child_by_name() increments the refcount in tegra_dc_rgb_probe,
but the driver does not decrement the refcount during unbind. Fix the
unbound reference count using devm_add_action_or_reset() helper.
Fixes: d8f4a9eda0 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205112137.36055-1-biju.das.jz@bp.renesas.com
The current code can issue CDMA flushes (DMAPUT bumps) in the middle
of a job, before all opcodes have been written into the pushbuffer.
This can happen when pushbuffer fills up. Presumably this made sense
at some point in the past, but it doesn't anymore, as it cannot lead
to more space appearing in the pushbuffer as it is only cleaned full
jobs at a time.
Mid-job flushes can also cause problems, as in an extreme situation
(seen in practice), the hardware can run through the entire pushbuffer
including the prefix of a partially written job without the driver
being able to process any CDMA updates. This can cause the engine
MLOCK to be taken and held for extended periods as the tail of the
job is not yet available to hardware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250204024546.1168126-1-mperttunen@nvidia.com
The Falcon DMA engine allows queueing multiple operations for
improved performance. Do this to optimize firmware loading.
A performance improvement of 4x to 6x is observed.
Co-developed-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205061027.1205748-1-mperttunen@nvidia.com
The header file 'tegra_drm.h' is included in gem.c, but this file is
already include 'drm.h'. Although there is no harm in including this
file again, it is also not necessary. Furthermore, the header file is
located under 'include/uapi/drm' so ideally the full path would be
used to be explicit. For now, just remove from gem.c.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250428153435.1013101-1-jonathanh@nvidia.com
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
Suggested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Fixes: 473079549f ("drm/tegra: dc: Add Tegra186 support")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250421-tegra-drm-primary-v2-1-7f740c4c2121@gmail.com
%p4cn was recently removed and replaced by %p4chR in vsprintf. So,
remove the check for %p4cn from checkpatch.pl.
Fixes: 37eed892cc ("vsprintf: Use %p4chR instead of %p4cn for reading data in reversed host ordering")
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/PN3PR01MB959760B89BF7E4B43852700CB8832@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Switch to panel timings based on datasheet for the AUO G101EVN01.0
LVDS panel. Default timings were tested on the panel.
Previous mode-based timings resulted in horizontal display shift.
Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Fixes: 4fb86404a9 ("drm/panel: simple: Add AUO G101EVN010 panel support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct vkms_plane_state **", but the returned type
will be "struct drm_plane **". These are the same size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Fixes: 8b18658736 ("drm/vkms: totally reworked crc data tracking")
Link: https://lore.kernel.org/r/20250426061431.work.304-kees@kernel.org
Signed-off-by: Louis Chauvet <contact@louischauvet.fr>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Currently userspace software systemd treats `brightness` and
`actual_brightness` identically due to a bug found in an out of tree
driver.
This however causes problems for in-tree drivers that use brightness
to report user requested `brightness` and `actual_brightness` to report
what the hardware actually has programmed.
Clarify the documentation to match the behavior described in commit
6ca017658b ("[PATCH] backlight: Backlight Class Improvements").
Cc: Lee Jones <lee@kernel.org>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: richard.purdie@linuxfoundation.org
Link: https://github.com/systemd/systemd/pull/36881
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://lore.kernel.org/r/20250415192101.2033518-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Use gpiod_set_value_cansleep() instead of gpiod_set_value()
to fix the below call trace in the boot log:
[ 5.690534] Call trace:
[ 5.690536] gpiod_set_value+0x40/0xa4
[ 5.690540] anx7625_runtime_pm_resume+0xa0/0x324 [anx7625]
[ 5.690545] __rpm_callback+0x48/0x1d8
[ 5.690549] rpm_callback+0x6c/0x78
Certain GPIO controllers require access via message-based buses
such as I2C or SPI, which may cause the GPIOs to enter a sleep
state. Therefore, use the gpiod_set_value_cansleep().
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In the anx7625_sink_detect(), the device is checked to see
if it is a panel bridge, and it always sends a "connected"
status to the connector. When adding the DP port on port 1 of the
anx7625, it incorrectly treats it as a panel bridge and sends an
always "connected" status. Instead of checking the status on the
panel bridge, it's better to check the hpd_status for connectors
that supports hot-plugging. This way, it verifies the hpd_status
variable before sending the status to the connector.
In case of eDP, anx7625_bridge_detect() will not get called because
the bridge->ops condition in anx7625_link_bridge() will not be
satisfied. Since anx7625_sink_detect() is called from
anx7625_bridge_detect(), this results in the sink_detect logic not
being executed for eDP.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-6-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The anx7625_link_bridge() checks if a device is not a panel
bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT
flags to the drm_bridge->ops. However, on port 1 of the anx7625
bridge, any device added is always treated as a panel bridge,
preventing connector_detect() from being called. To resolve
this, instead of just checking if it is a panel bridge, verify
the type of device based on aux whether it is a DisplayPort or
eDP panel. If the device is not of the eDP type, add
DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to
the drm_bridge->ops.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-5-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When the device enters the suspend state, it prevents
HPD interrupts from occurring. To address this, implement
.hpd_enable() and .hpd_disable() callbacks functions of
the drm_bridge.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-4-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Just a couple of build fixes on ARM64.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSo2x5BnqMqsoHtzsmMstVUGiXMgwUCaBfAmwAKCRCMstVUGiXM
g6N3AQDBWY9AcYbSO/3UnFwi8OSvA89vEDMPhALzg7KIlPGxAQD/e0lWHS39wf3d
1fhRGyMGZCM8PEogrjdw01ZYT9rzJAI=
=poAK
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools fixes from Namhyung Kim:
"Just a couple of build fixes on arm64"
* tag 'perf-tools-fixes-for-v6.15-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
perf tools: Fix in-source libperf build
perf tools: Fix arm64 build by generating unistd_64.h
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page. But
the buffer used in tracing_splice_read_pipe() only allocates a page size.
The data copied to the buffer is the amount in sub buffer which can
overflow the buffer. Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE)
to limit the amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer level.
- Do not use the array in trace_adjust_address() if there are no elements
The trace_adjust_address() finds the offset of a module that was stored in
the persistent buffer when reading the previous boot buffer to see if the
address belongs to a module that was loaded in the previous boot. An array
is created that matches currently loaded modules with previously loaded
modules. The trace_adjust_address() uses that array to find the new offset
of the address that's in the previous buffer. But if no module was
loaded, it ends up reading the last element in an array that was never
allocated. Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events list and
requires the trace_event_sem semaphore held for read. But this function is
always called with that semaphore held for read. Remove the taking of the
semaphore and replace it with lockdep_assert_held_read(&trace_event_sem);
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaBeXEBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qvXFAP9JNgi0+ainOppsEP6u9KH+sttxKl76
14EslzuPqbzgOwD/Sm00a8n7m858iv6UN3AAW9AsX2QK5yG0Wbvterm8FgI=
=s9qk
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix read out of bounds bug in tracing_splice_read_pipe()
The size of the sub page being read can now be greater than a page.
But the buffer used in tracing_splice_read_pipe() only allocates a
page size. The data copied to the buffer is the amount in sub buffer
which can overflow the buffer.
Use min((size_t)trace_seq_used(&iter->seq), PAGE_SIZE) to limit the
amount copied to the buffer to a max of PAGE_SIZE.
- Fix the test for NULL from "!filter_hash" to "!*filter_hash"
The add_next_hash() function checked for NULL at the wrong pointer
level.
- Do not use the array in trace_adjust_address() if there are no
elements
The trace_adjust_address() finds the offset of a module that was
stored in the persistent buffer when reading the previous boot buffer
to see if the address belongs to a module that was loaded in the
previous boot. An array is created that matches currently loaded
modules with previously loaded modules. The trace_adjust_address()
uses that array to find the new offset of the address that's in the
previous buffer. But if no module was loaded, it ends up reading the
last element in an array that was never allocated.
Check if nr_entries is zero and exit out early if it is.
- Remove nested lock of trace_event_sem in print_event_fields()
The print_event_fields() function iterates over the ftrace_events
list and requires the trace_event_sem semaphore held for read. But
this function is always called with that semaphore held for read.
Remove the taking of the semaphore and replace it with
lockdep_assert_held_read(&trace_event_sem)
* tag 'trace-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Do not take trace_event_sem in print_event_fields()
tracing: Fix trace_adjust_address() when there is no modules in scratch area
ftrace: Fix NULL memory allocation check
tracing: Fix oob write in trace_seq_to_buffer()
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
avoid spurious interrupts, in altera_edac
-----BEGIN PGP SIGNATURE-----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=0/C/
-----END PGP SIGNATURE-----
Merge tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC fixes from Borislav Petkov:
- Test the correct structure member when handling correctable errors
and avoid spurious interrupts, in altera_edac
* tag 'edac_urgent_for_v6.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/altera: Set DDR and SDMMC interrupt mask before registration
EDAC/altera: Test the correct error reg offset
running at VMPL >0.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmgXF5kRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1ileRAAoCNfnvVcJrmZirgMVT4xs5WGPgy9D5KQ
o3uXqUEoCSZp7GFZP4rqbSiptKt2aVDLGkoS25xqb/DWbGzL5MpskTWUWekafMNw
iFjbICCxF2Pt/EZEKQJXlbyI+UDnJRHOjrnL+0CK1pViBlf5c4XBic9rUj/+5XMt
OQqCDLdQuVQjpBn13PyrL2SR1vuONtVhQA/CVejy6w6eeWFQZzmGP2kuDMgM9pSE
jW2qPpWcXpyhFrcKksB0R6FW1Vxsfwdv94p7NcnVhaXC+smJPFBODpj9aziQuP6Z
BDraPmvr2nyZFLx1pXD4DS5bpXWqCeXKL0lz4iKxMHtJFGXt3tKkhWs1Bn/0Ckzs
DntPojW3x3xgbR4R6sd651jHwYTXdjjCWgH8vRKu+kTfEvkwoMSr2XvDzDHusWnW
y5C+Tv+irk1gKY5atEvie++HT1ZH/m31rL8PkA2c4i8wl3iAbLnKMBOMNEdUxH8l
SVLQq1yZ0hdpbOYOKVH/yGSWhlo7jF0Zku7dToseM28HljvT1do+JED7ZQ2feDsU
3zc0c4GuAc1fwhjwoobVaF0w1JHhF7TqKLG91hUzXTvKiyQi3UNxMzuirUx/bn2A
60RcEBv8vk8F5Unqs8L1zvmUZrY6ncS8O0GDjYNWFP5yHZRx9uQ/8rDRKhPSqEgs
3DSXHTLidlk=
=6nPf
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Ingo Molnar:
"Fix SEV-SNP memory acceptance from the EFI stub for guests
running at VMPL >0"
* tag 'x86-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/sev: Support memory acceptance in the EFI stub under SVSM
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=F7wJ
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc perf fixes from Ingo Molnar:
- Require group events for branch counter groups and
PEBS counter snapshotting groups to be x86 events.
- Fix the handling of counter-snapshotting of non-precise
events, where counter values may move backwards a bit,
temporarily, confusing the code.
- Restrict perf/KVM PEBS to guest-owned events.
* tag 'perf-urgent-2025-05-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: KVM: Mask PEBS_ENABLE loaded for guest with vCPU's value.
perf/x86/intel/ds: Fix counter backwards of non-precise events counters-snapshotting
perf/x86/intel: Check the X86 leader for pebs_counter_event_group
perf/x86/intel: Only check the group flag for X86 leader
The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF.
Without the polarity configuration in GRF, it can be observed
from the HDMI protocol analyzer that the H/V front/back timing
output by RK3036 HDMI are currently not in line with the specifications.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-5-andyshrk@163.com
HDMI on RK3036 use GRF control the HSYNC/VSYNC polarity, but this part
is missing when it first landing upstream.
Document that it is mandatory for RK3036 HDMI.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-3-andyshrk@163.com
The RK3036 HDMI DDC bus requires it's PHY's reference clock to be enabled
first before normal DDC communication can be carried out.
Therefore, both RK3036 and RK3128 HDMI require two identical clocks.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-2-andyshrk@163.com
Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.
Note: I don't have the hardware to test this driver, so for now
I can only do the compilation test.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3066-marsboard
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250428102309.1501986-1-andyshrk@163.com
Commit:
d54d610243 ("x86/boot/sev: Avoid shared GHCB page for early memory acceptance")
provided a fix for SEV-SNP memory acceptance from the EFI stub when
running at VMPL #0. However, that fix was insufficient for SVSM SEV-SNP
guests running at VMPL >0, as those rely on a SVSM calling area, which
is a shared buffer whose address is programmed into a SEV-SNP MSR, and
the SEV init code that sets up this calling area executes much later
during the boot.
Given that booting via the EFI stub at VMPL >0 implies that the firmware
has configured this calling area already, reuse it for performing memory
acceptance in the EFI stub.
Fixes: fcd042e864 ("x86/sev: Perform PVALIDATE using the SVSM when not at VMPL0")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250428174322.2780170-2-ardb+git@google.com
is_midr_in_range_list() reads beyond the end of these arrays.
-----BEGIN PGP SIGNATURE-----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=fddi
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fix from Catalin Marinas:
"Add missing sentinels to the arm64 Spectre-BHB MIDR arrays, otherwise
is_midr_in_range_list() reads beyond the end of these arrays"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: errata: Add missing sentinels to Spectre-BHB MIDR arrays
A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card
-----BEGIN PGP SIGNATURE-----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=sF2D
-----END PGP SIGNATURE-----
Merge tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes. Mostly driver specific.
- An OOB access fix in core UMP rawmidi conversion code
- Fix for ASoC DAPM hw_params widget sequence
- Make retry of usb_set_interface() errors for flaky devices
- Fix redundant USB MIDI name strings
- Quirks for various HP and ASUS models with HD-audio, and
Jabra Evolve 65 USB-audio
- Cirrus Kunit test fixes
- Various fixes for ASoC Intel, stm32, renesas, imx-card, and
simple-card"
* tag 'sound-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ASoC: amd: ps: fix for irq handler return status
ASoC: simple-card-utils: Fix pointer check in graph_util_parse_link_direction
ASoC: intel/sdw_utils: Add volume limit to cs35l56 speakers
ASoC: intel/sdw_utils: Add volume limit to cs42l43 speakers
ASoC: stm32: sai: add a check on minimal kernel frequency
ASoC: stm32: sai: skip useless iterations on kernel rate loop
ALSA: hda/realtek - Add more HP laptops which need mute led fixup
ALSA: hda/realtek: Fix built-mic regression on other ASUS models
ASoC: Intel: catpt: avoid type mismatch in dev_dbg() format
ALSA: usb-audio: Fix duplicated name in MIDI substream names
ALSA: ump: Fix buffer overflow at UMP SysEx message conversion
ALSA: usb-audio: Add second USB ID for Jabra Evolve 65 headset
ALSA: hda/realtek: Add quirk for HP Spectre x360 15-df1xxx
ALSA: hda: Apply volume control on speaker+lineout for HP EliteStudio AIO
ASoC: Intel: bytcr_rt5640: Add DMI quirk for Acer Aspire SW3-013
ASoC: amd: acp: Fix devm_snd_soc_register_card(acp-pdm-mach) failure
ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot
ASoC: amd: acp: Fix NULL pointer deref on acp resume path
ASoC: renesas: rz-ssi: Use NOIRQ_SYSTEM_SLEEP_PM_OPS()
ASoC: soc-acpi-intel-ptl-match: add empty item to ptl_cs42l43_l3[]
...
The panel can be connected to via graph nodes, so allow the port property.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-3-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The panel can be connected to via graph nodes, so allow the port property.
This fixes dtc checker warnings like:
>> arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: panel@0 (leadtek,ltk050h3148w): 'port' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/display/panel/leadtek,ltk050h3146w.yaml#
arch/arm64/boot/dts/rockchip/rk3588-tiger-haikou-haikou-video-demo.dtb: /edp@fdec0000: failed to match any schema with compatible: ['rockchip,rk3588-edp']
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504300218.VDqQqGTT-lkp@intel.com/
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250430082850.244199-2-heiko@sntech.de
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
A fairly small pile of fixes, plus one new compatible string addition to
the Synopsis driver for a new platform. The most notable thing is the
fix for divide by zeros in spi-mem if an operation has no dummy bytes.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmgVU+4ACgkQJNaLcl1U
h9DtiQf/WFONuTRhVXKO7yn3W3ZPP0zWi9RjKH/n8ZW7R6My7y3XwYraPKHsCYvf
xr856tK0hsY2k8Gg7zvE0oCAu+K4kSSV6IXumbj55MMWameermAL8WXgFl/yhFvT
nuU6Rp7EgOY1sl+UUChggb1Kr1xz5MMbrnuECKynFpzxx0RGNymrLNHcC2pl2yF/
nSBwMu2pWTh8SZUoxxDqfH3PQvpyq6i7V28zZ/J9XHz7GhfVwjA6U1xZlXjUuqyq
zP4oABUmktqCaySgRM3aj5mhoIfG/Ywxz8jAt9+hE/Bpo7a5tpxMBVzhBfbPYT3g
x7vYsAJ9yMw9DIdOykuyZ/pcuKPbdg==
=kk6A
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A fairly small pile of fixes, plus one new compatible string addition
to the Synopsis driver for a new platform.
The most notable thing is the fix for divide by zeros in spi-mem if an
operation has no dummy bytes"
* tag 'spi-fix-v6.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra114: Don't fail set_cs_timing when delays are zero
spi: spi-qpic-snand: fix NAND_READ_LOCATION_2 register handling
spi: spi-mem: Add fix to avoid divide error
spi: dt-bindings: snps,dw-apb-ssi: Add compatible for SOPHGO SG2042 SoC
spi: dt-bindings: snps,dw-apb-ssi: Merge duplicate compatible entry
spi: spi-qpic-snand: propagate errors from qcom_spi_block_erase()
spi: stm32-ospi: Fix an error handling path in stm32_ospi_probe()
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits (Rafael
Wysocki).
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with frequency boost during system resume (Viresh Kumar).
- Fix a recent regression causing resume failures to occur in the
Intel Soundwire driver if the device handled by it is in runtime
suspend before a system-wide suspend (Rafael Wysocki).
- Fix an unchecked MSR aceess in the intel_pstate driver occurring when
CPUID indicates no turbo, but the driver attempts to enable turbo
frequencies due to a misleading value read from an MSR (Srinivas
Pandruvada).
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmgVKJISHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1xVgIAKLt++WS6ZdQRwgmcpsB11v72SK0Vp4V
+7gH6GQYX6lPcq/jUxbmrxLnckPges7ql+LVqx/llCFCZngVvovhjZF3jDjqWy0/
paC755G2yOEv0wK9jBQOqgpj2UOCe/cBqFYTRg4m1dQiSzzpMeBPJFd8b8rabIl5
Ul5DIXUP6HstPaXEJRGVO4dcM5O03CkRqXKpKhpgRuURnkJDAQ48JwxSqHiKVJYI
dD90qAPli4+7N1mxyUgUWeILrPv2D9nv6j6j8br2Fxts3yj57uMSmasHknCaVXAN
6k4KR2w6nRojuInlCZNCimLQX0tvmnPOMhScd7p15zYAr7hwOPvjQ/k=
=s5++
-----END PGP SIGNATURE-----
Merge tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix three recent regressions, two in cpufreq and one in the
Intel Soundwire driver, and an unchecked MSR access in the
intel_pstate driver:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits
(Rafael Wysocki)
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with frequency boost during system resume (Viresh Kumar)
- Fix a recent regression causing resume failures to occur in the
Intel Soundwire driver if the device handled by it is in runtime
suspend before a system-wide suspend (Rafael Wysocki)
- Fix an unchecked MSR aceess in the intel_pstate driver occurring
when CPUID indicates no turbo, but the driver attempts to enable
turbo frequencies due to a misleading value read from an MSR
(Srinivas Pandruvada)"
* tag 'pm-6.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
soundwire: intel_auxdevice: Fix system suspend/resume handling
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume
-----BEGIN PGP SIGNATURE-----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=wCs2
-----END PGP SIGNATURE-----
Merge tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fix posix mkdir error to ksmbd (also avoids crash in
cifs_destroy_request_bufs)
- two smb1 fixes: fixing querypath info and setpathinfo to old servers
- fix rsize/wsize when not multiple of page size to address DIO
reads/writes
* tag '6.15-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: ensure aligned IO sizes
cifs: Fix changing times and read-only attr over SMB1 smb_set_file_info() function
cifs: Fix and improve cifs_query_path_info() and cifs_query_file_info()
smb: client: fix zero length for mkdir POSIX create context
Merge cpufreq fixes for 6.15-rc5:
- Fix a recent regression causing systems where frequency tables are
used by cpufreq to have issues with setting frequency limits (Rafael
Wysocki).
- Fix a recent regressions causing frequency boost settings to become
out-of-sync if platform firmware updates the registers associated
with them during system resume (Viresh Kumar).
- Fix an unchecked MSR aceess in the intel_pstate driver occurring when
CPUID indicates no turbo, but the driver attempts to enable turbo
frequencies due to a misleading value read from an MSR (Srinivas
Pandruvada).
* pm-cpufreq:
cpufreq: intel_pstate: Unchecked MSR aceess in legacy mode
cpufreq: Fix setting policy limits when frequency tables are used
cpufreq: ACPI: Re-sync CPU boost state on system resume