In tegra_crtc_reset(), new memory is allocated with kzalloc(), but
no check is performed. Before calling __drm_atomic_helper_crtc_reset,
state should be checked to prevent possible null pointer dereference.
Fixes: b7e0b04ae4 ("drm/tegra: Convert to using __drm_atomic_helper_crtc_reset() for reset.")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20241106095906.15247-1-chenqiuji666@gmail.com
The of_get_child_by_name() increments the refcount in tegra_dc_rgb_probe,
but the driver does not decrement the refcount during unbind. Fix the
unbound reference count using devm_add_action_or_reset() helper.
Fixes: d8f4a9eda0 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205112137.36055-1-biju.das.jz@bp.renesas.com
The current code can issue CDMA flushes (DMAPUT bumps) in the middle
of a job, before all opcodes have been written into the pushbuffer.
This can happen when pushbuffer fills up. Presumably this made sense
at some point in the past, but it doesn't anymore, as it cannot lead
to more space appearing in the pushbuffer as it is only cleaned full
jobs at a time.
Mid-job flushes can also cause problems, as in an extreme situation
(seen in practice), the hardware can run through the entire pushbuffer
including the prefix of a partially written job without the driver
being able to process any CDMA updates. This can cause the engine
MLOCK to be taken and held for extended periods as the tail of the
job is not yet available to hardware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250204024546.1168126-1-mperttunen@nvidia.com
The Falcon DMA engine allows queueing multiple operations for
improved performance. Do this to optimize firmware loading.
A performance improvement of 4x to 6x is observed.
Co-developed-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Ivan Raul Guadarrama <iguadarrama@nvidia.com>
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205061027.1205748-1-mperttunen@nvidia.com
The header file 'tegra_drm.h' is included in gem.c, but this file is
already include 'drm.h'. Although there is no harm in including this
file again, it is also not necessary. Furthermore, the header file is
located under 'include/uapi/drm' so ideally the full path would be
used to be explicit. For now, just remove from gem.c.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250428153435.1013101-1-jonathanh@nvidia.com
Changes to a plane's type after it has been registered aren't propagated
to userspace automatically. This could possibly be achieved by updating
the property, but since we can already determine which type this should
be before the registration, passing in the right type from the start is
a much better solution.
Suggested-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Cc: stable@vger.kernel.org
Fixes: 473079549f ("drm/tegra: dc: Add Tegra186 support")
Signed-off-by: Aaron Kling <webgeek1234@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250421-tegra-drm-primary-v2-1-7f740c4c2121@gmail.com
Switch to panel timings based on datasheet for the AUO G101EVN01.0
LVDS panel. Default timings were tested on the panel.
Previous mode-based timings resulted in horizontal display shift.
Signed-off-by: Kevin Baker <kevinb@ventureresearch.com>
Fixes: 4fb86404a9 ("drm/panel: simple: Add AUO G101EVN010 panel support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250505170256.1385113-1-kevinb@ventureresearch.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct vkms_plane_state **", but the returned type
will be "struct drm_plane **". These are the same size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Fixes: 8b18658736 ("drm/vkms: totally reworked crc data tracking")
Link: https://lore.kernel.org/r/20250426061431.work.304-kees@kernel.org
Signed-off-by: Louis Chauvet <contact@louischauvet.fr>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCgA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmgX1CgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGxiIH/A7LHlVatGEQgRFi
0JALDgcuGTMtMU1qD43rv8Z1GXqTpCAlaBt9D1C9cUH/86MGyBTVRWgVy0wkaU2U
8QSfFWQIbrdaIzelHtzmAv5IDtb+KrcX1iYGLcMb6ZYaWkv8/CMzMX1nkgxEr1QT
37Xo3/F17yJumAdNQxdRhVLGy2d3X5rScecpufwh97sMwoddllMCDs2LIoeSAYpG
376/wzni09G2fADa8MEKqcaMue4qcf0FOo/gOkT8YwFGSZLKa6uumlBLg04QoCt0
foK2vfcci1q4H4ZbCu3uQESYGLQHY0f2ICDCwC3m25VF9a81TmlbC3MLum3vhmKe
RtLDcXg=
=xyaI
-----END PGP SIGNATURE-----
BackMerge tag 'v6.15-rc5' into drm-next
Linux 6.15-rc5, requested by tzimmerman for fixes required in drm-next.
Signed-off-by: Dave Airlie <airlied@redhat.com>
Use gpiod_set_value_cansleep() instead of gpiod_set_value()
to fix the below call trace in the boot log:
[ 5.690534] Call trace:
[ 5.690536] gpiod_set_value+0x40/0xa4
[ 5.690540] anx7625_runtime_pm_resume+0xa0/0x324 [anx7625]
[ 5.690545] __rpm_callback+0x48/0x1d8
[ 5.690549] rpm_callback+0x6c/0x78
Certain GPIO controllers require access via message-based buses
such as I2C or SPI, which may cause the GPIOs to enter a sleep
state. Therefore, use the gpiod_set_value_cansleep().
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250505094245.2660750-7-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
In the anx7625_sink_detect(), the device is checked to see
if it is a panel bridge, and it always sends a "connected"
status to the connector. When adding the DP port on port 1 of the
anx7625, it incorrectly treats it as a panel bridge and sends an
always "connected" status. Instead of checking the status on the
panel bridge, it's better to check the hpd_status for connectors
that supports hot-plugging. This way, it verifies the hpd_status
variable before sending the status to the connector.
In case of eDP, anx7625_bridge_detect() will not get called because
the bridge->ops condition in anx7625_link_bridge() will not be
satisfied. Since anx7625_sink_detect() is called from
anx7625_bridge_detect(), this results in the sink_detect logic not
being executed for eDP.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-6-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The anx7625_link_bridge() checks if a device is not a panel
bridge and add DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT
flags to the drm_bridge->ops. However, on port 1 of the anx7625
bridge, any device added is always treated as a panel bridge,
preventing connector_detect() from being called. To resolve
this, instead of just checking if it is a panel bridge, verify
the type of device based on aux whether it is a DisplayPort or
eDP panel. If the device is not of the eDP type, add
DRM_BRIDGE_OP_HPD and DRM_BRIDGE_OP_DETECT flags to the to
the drm_bridge->ops.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-5-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
When the device enters the suspend state, it prevents
HPD interrupts from occurring. To address this, implement
.hpd_enable() and .hpd_disable() callbacks functions of
the drm_bridge.
Signed-off-by: Ayushi Makhija <quic_amakhija@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250505094245.2660750-4-quic_amakhija@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF.
Without the polarity configuration in GRF, it can be observed
from the HDMI protocol analyzer that the H/V front/back timing
output by RK3036 HDMI are currently not in line with the specifications.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250422070455.432666-5-andyshrk@163.com
Convert it to drm bridge driver, it will be convenient for us to
migrate the connector part to the display driver later.
Note: I don't have the hardware to test this driver, so for now
I can only do the compilation test.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3066-marsboard
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250428102309.1501986-1-andyshrk@163.com
The function are defined in the rcar_cmm.c file, but not called
elsewhere, so delete the unused function.
drivers/gpu/drm/renesas/rcar-du/rcar_cmm.c:35:19: warning: unused function 'rcar_cmm_read'.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=9364
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20240619075436.86407-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
The rcar_du_vsps_init() doesn't free the np allocated by
of_parse_phandle_with_fixed_args() for the non-error case.
Fix memory leak for the non-error case.
While at it, replace the label 'error'->'done' as it applies to non-error
case as well and update the error check condition for rcar_du_vsp_init()
to avoid breakage in future, if it returns positive value.
Fixes: 3e81374e20 ("drm: rcar-du: Support multiple sources from the same VSP")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20231116122424.80136-1-biju.das.jz@bp.renesas.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
drm-misc-next for v6.16-rc1:
UAPI Changes:
- panthor now fails in mmap_offset call for a BO created with
DRM_PANTHOR_BO_NO_MMAP.
- Add DRM_PANTHOR_BO_SET_LABEL ioctl and label panthor kernel BOs.
Cross-subsystem Changes:
- Add kmap_local_page_try_from_panic for drm/panic.
- Add DT bindings for panels.
- Update DT bindings for imagination.
- Extend %p4cc in lib/vsprintf.c to support fourcc printing.
Core Changes:
- Remove the disgusting turds.
- Register definition updates for DP.
- DisplayID timing blocks refactor.
- Remove now unused mipi_dsi_dsc_write_seq.
- Convert panel drivers to not return error in prepare/enable and
unprepare/disable calls.
Driver Changes:
- Assorted small fixes and featuers for rockchip, panthor, accel/ivpu,
accel/amdxdna, hisilicon/hibmc, i915/backlight, sysfb, accel/qaic,
udl, etnaviv, virtio, xlnx, panel/boe-bf060y8m-aj0, bridge/synopsis,
panthor, panel/samsung/sofef00m, lontium/lt9611uxc, nouveau, panel/himax-hx8279,
panfrost, st7571-i2c.
- Improve hibmc interrupt handling and add HPD support.
- Add NLT NL13676BC25-03F, Tianma TM070JDHG34-00, Himax HX8279/HX8279-D
DDIC, Visionox G2647FB105, Sitronix ST7571 LCD Controller, panels.
- Add zpos, alpha and blend to renesas.
- Convert drivers to use drm_gem_is_imported, replacing gem->import_attach.
- Support TI AM68 GPU in imagination.
- Support panic handler in virtio.
- Add support to get the panel from DP AUX bus in rockchip and add
RK3588 support.
- Make sofef00 only support the sofef00 panel, not another unrelated
one.
- Add debugfs BO dumping support to panthor, and print associated labels.
- Implement heartbeat based hangcheck in ivpu.
- Mass convert drivers to devm_drm_bridge_alloc api.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/e2a958d9-e506-4962-8bae-0dbf2ecc000f@linux.intel.com
The 'has_dma_mapping' flag should be set once there is a
mapping so it could be unmapped in case of error.
v2:
- Resend for CI
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250428024752.881292-1-matthew.brost@intel.com
(cherry picked from commit f64cf7b681)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
drm/i915 fixes for v6.15-rc5:
- Fix build for CONFIG_DRM_I915_PXP=n
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://lore.kernel.org/r/87selquhpe.fsf@intel.com
EU stall sampling is not supported on SRIOV VF. Do not
initialize or open EU stall stream on SRIOV VF.
Fixes: 9a0b11d4cf ("drm/xe/eustall: Add support to init, enable and disable EU stall sampling")
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/10db5d1c7e17aadca7078ff74575b7ffc0d5d6b8.1745215022.git.harish.chegondi@intel.com
(cherry picked from commit 6ed20625a4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
(cherry picked from commit c2b1f1b864)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
For vcn5.0.1 only, enable DPG PAUSE to avoid DPG resets.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3e5f86c14c)
APUs in passthrough mode use HDP flush. 0x7F000 offset used for
remapping HDP flush is mapped to VPE space which could get power gated.
Use another unused offset in BIF space.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d8116a32cd)
Cc: stable@vger.kernel.org
If peer memory is XGMI-accessible, we should never access it through PCIe
P2P DMA mappings. PCIe P2P is slower, has different coherence behaviour,
limited or no support for atomics, or may not work at all. Fail with a
warning if DMABUF mappings of such memory are attempted.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit dbe4c63689)
DRM_DISPLAY_DP_AUX_BUS cannot be selected when CONFIG_OF is disabled:
WARNING: unmet direct dependencies detected for DRM_DISPLAY_DP_AUX_BUS
Depends on [n]: HAS_IOMEM [=y] && DRM [=y] && OF [=n]
Selected by [y]:
- DRM_ROCKCHIP [=y] && HAS_IOMEM [=y] && DRM [=y] && ROCKCHIP_IOMMU [=y] && ROCKCHIP_ANALOGIX_DP [=y]
Rockchip platforms all depend on OF anyway, so add the dependency here
for compile testing.
Fixes: d7b4936b2b ("drm/rockchip: analogix_dp: Add support to get panel from the DP AUX bus")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250423164422.2793634-1-arnd@kernel.org
for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes
for adp, a memory leak fix for the shmem kunit tests, and a timing fix
for mipi-dbi.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaBHeEAAKCRAnX84Zoj2+
dhb5AX9S1pdDpVG6iwarQwzJLKfUSVTClq0K7F60+binY9VBycAcdnmBPE7y9mvo
ib1adKABfRMDLgj+rYPdF7Vrw/sHpkwmRpM07efBJFa8tC0z1FsVyf2FmYp6+75Y
0g6MxpkrFw==
=Gzph
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2025-04-30' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A spurious WARN fix for nouveau, an init and interrupt handling fixes
for ivpu, a warning fix for ttm, a hotplug fix for fdinfo, vblank fixes
for adp, a memory leak fix for the shmem kunit tests, and a timing fix
for mipi-dbi.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://lore.kernel.org/r/20250430-dark-eggplant-trout-c4ea6c@houat
Explain how to perform front-buffer rendering.
v2: apply Pekka's rewrite
Signed-off-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Simon Ser <contact@emersion.fr>
Link: https://lore.kernel.org/r/20250414085652.43904-1-contact@emersion.fr
The devm_kzalloc() function returns NULL on failure, not error pointers.
Also printing an error message for kmalloc() failures is against kernel
style so just return -ENOMEM without printing a message. (Kmalloc
already prints a message).
Fixes: 4b35f0f41e ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/aBHZYgPPPYY-J8Vd@stanley.mountain
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Commit a3707f53eb ("drm/panthor: show device-wide list of DRM GEM
objects over DebugFS") causes a build warning and linking error when
built without support for DebugFS, because of a non-inline non-static
function declaration in a header file.
On top of that, the function is only being used inside a single
compilation unit, so there is no point in exposing it as a global
symbol.
This is a follow-up from Arnd Bergmann's first fix.
Also move panthor_gem_debugfs_set_usage_flags() into panthor_gem.c and
declare it static.
Fixes: a3707f53eb ("drm/panthor: show device-wide list of DRM GEM objects over DebugFS")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Closes: https://lore.kernel.org/dri-devel/20250424142419.47b9d457@collabora.com/T/#t
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20250424184041.356191-1-adrian.larumbe@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
On r6x2b6x2g6x2 displays not enough blank data is sent to blank the
entire screen. When support for these displays was added, the dirty
function was updated to handle the different amount of data, but
blanking was not, and remained hardcoded as 2 bytes per pixel.
This change applies almost the same algorithm used in the dirty function
to the blank function, but there is no fb available at that point, and
no concern about having to transform any data, so the dbidev pixel
format is always used for calculating the length.
Fixes: 4aebb79021 ("drm/mipi-dbi: Add support for DRM_FORMAT_RGB888")
Signed-off-by: Russell Cloran <rcloran@gmail.com>
Link: https://lore.kernel.org/r/20250415053259.79572-1-rcloran@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_gem_shmem_test_get_pages_sgt() gets a scatter-gather table using
the drm_gem_shmem_get_sg_table() function and rightfully calls
sg_free_table() on it. However, it's also supposed to kfree() the
returned sg_table, but doesn't.
This leads to a memory leak, reported by kmemleak. Fix it by adding a
kunit action to kfree the sgt when the test ends.
Reported-by: Philipp Stanner <phasta@mailbox.org>
Closes: https://lore.kernel.org/dri-devel/a7655158a6367ac46194d57f4b7433ef0772a73e.camel@mailbox.org/
Fixes: 93032ae634 ("drm/test: add a test suite for GEM objects backed by shmem")
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250408140758.1831333-1-mripard@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The appletbdrm driver is exclusively for Touch Bars on x86 Intel Macs.
The M1 Macs have a separate driver. So, lets avoid compiling it for
other architectures.
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/PN3PR01MB95970778982F28E4A3751392B8B72@PN3PR01MB9597.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
The newly added driver calls drm_client_setup(), but that is not
always built in:
x86_64-linux-ld: vmlinux.o: in function `st7571_probe':
st7571-i2c.c:(.text+0x7b7119): undefined reference to `drm_client_setup'
Select the appropriate Kconfig symbol.
Fixes: 4b35f0f41e ("drm/st7571-i2c: add support for Sitronix ST7571 LCD controller")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250428150752.3970145-1-arnd@kernel.org
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
This is the new API for allocating DRM bridges.
These two drivers are tangled together by the ldb_add_bridge_helper(), so
they are converted at once.
They also have a similar design, each embedding an array of channels in
their main struct, and each channel embeds a drm_bridge. This prevents
dynamic, refcount-based deallocation of the bridges.
To make the new, dynamic bridge allocation possible:
* change the array of channels into an array of channel pointers
* allocate each channel using devm_drm_bridge_alloc()
* adapt ldb_add_bridge_helper() to not set the funcs pointer
(now done by devm_drm_bridge_alloc())
* adapt the code wherever using the channels
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Liu Ying <victor.liu@nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-31-8f91a404d86b@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
This is the new API for allocating DRM bridges.
This driver already implements refcounting of the struct vc4_dsi, which
embeds struct drm_bridge. Now this is a duplicate of the refcounting
implemented by the DRM bridge core, so convert the vc4_dsi_get/put() calls
into drm_bridge_get/put() calls and get rid of the driver-specific
refcounting implementation.
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250424-drm-bridge-convert-to-alloc-api-v2-27-8f91a404d86b@bootlin.com
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>