Add a comment on which of the conflicting NODE_IDS specifications we
implement. Reduce a comment on rather irrelevant register bits that can
all be looked up in the spec (or from now on in the code history).
Directly include the required indirectly included bug.h.
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de>
Also separate out an _EXTRAVERSION similar to the core kernel.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch enables IEEE802.3az (a.k.a. Energy Efficient Ethernet) on the
new 82579 LOMs. An optional module parameter is provided to disable the
feature if desired.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not check for all the bits in E1000_FWSM_MODE_MASK when checking for
manageability on 82577/82578; only check if iAMT is enabled. Both of the
manageability checks (for 82577/82578 and ICHx) must check the firmware
valid bit too since the other bits are only valid when the latter is set.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 82577/82578 parts have half-duplex statistics in PHY registers. These
need only be read when in half-duplex and should all be read at once rather
than one at a time to prevent excessive cycles of acquiring/releasing the
PHY semaphore.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Do not acquire and release the PHY unnecessarily for parts that return
from this workaround without actually accessing the PHY registers.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Refactor the loopback setup code to first handle the only 10/100 PHY
supported by the driver if applicable and then handle the 1Gig PHYs in a
switch statement for PHY-specific setups.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove an unused flag and replace couple constants with enums.
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Update to latest FW API. Most changes here pertain to port types and
querying FW for parameter values.
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement ndo_get_stats64, remove ndo_get_stats.
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement the pci_error_handlers methods for EEH.
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Split some existing initialization code into a separate function for use
by EEH next. No functional changes.
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Handle the larger flash memories on newer boards:
- get the size and number of sectors by probing the flash
- writes and erases can take longer, adjust the timeouts for these operations
- the FW image can be at different locations depending on flash size,
find its location dynamically as well.
Signed-off-by: Dimitris Michailidis <dm@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When SX_TLV widgets are read, if the gain is set to a value below 0dB,
the mixer control is erroniously read as being at maximum volume.
The value read out of the CODEC register is never sign-extended, and
when the minimum value is subtracted (read; added, since the minimum is
negative) the result is a number greater than the maximum allowed value
for the control, and hence it saturates.
Solution: Mask the result so that it "wraps around", emulating
sign-extension.
Signed-off-by: Stuart Longland <redhatter@gentoo.org>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Gen3 chips have slightly different flip commands, and also contain a bit
that indicates whether a "flip pending" interrupt means the flip has
been queued or has been completed.
So implement support for the gen3 flip command, and make sure we use the
flip pending interrupt correctly depending on the value of ECOSKPD bit
0.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Hardware will set the flip pending ISR bit as soon as it receives the
flip instruction, and (supposedly) clear it once the flip completes
(e.g. at the next vblank). If we try to send down a flip instruction
while the ISR bit is set, the hardware can become very confused, and we
may never receive the corresponding flip pending interrupt, effectively
hanging the chip.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
vis_interval does not neccesarily needs to be a variable, as there is
no way to change it anyway (and probably no need to). We can therefore
remove yet another global variable.
Thanks Marek for pointing this out.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
[sven.eckelmann@gmx.de: Rework on top of current version]
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Add documents about new sysfs entries in
* /sys/class/net/<iface>/batman-adv/mesh_iface
* /sys/class/net/<mesh_iface>/mesh/vis_mode
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
batman-adv is receiving and sending the packets of its own ether type
on a very early/low level. Therefore we need to add explicit hooks to
give netfilter/ebtables a chance to filter them.
Reported-by: Antonio Quartulli <ordex@ritirata.org>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The hardif_attr and the bat_attr struct share the same attributes,
hence it is not necessary to specify 2 different structs.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
A really trivial patch to solve a warning when compiling staging/pohmelfs
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com>
Acked-by: Evgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove the DT_3155_{SUCCESS/FAILURE} errno defines and use the
kernel provided ones.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Scott Smedley <ss@aao.gov.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This fixes the different address spaces noise when copying data to/from
user space to kernel space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The third argument of dma_alloc_coherent() is of type dma_addr_t and is defined
as u64 for x86_64, while the member 'device_base' of struct dma_coherent_mem is
defined as u32.
While at it, clean up the code. Now if dev->dma_mem != NULL all the fields/members
are already properly initialized.
Signed-off-by: Marin Mitov <mitov@issp.bas.bg>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed most problems pointed out by checkpatch.pl in file r8192U_core.c
up to line 500
Signed-off-by: Mike Gilks <mike.kernel@gilksonline.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Removed kfree(NULL checks) that were not necessary
Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fixed issues found by checkpatch.pl including adding KERN_
facility levels to printk() calls and C99 comments.
Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
wrq->name is only 16 characters long but "IEEE 802.11-MIMO" is 16
characters + a NULL character, so it's too long. This patch changes it
to "IEEE 802.11abgn".
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
On Mon, 2010-06-07 at 12:02 -0700, Luis R. Rodriguez wrote:
> this driver is unmaintained and its only purpose is as a
> source of documentation for developers working on ar9170 and carl9170.
> Once carl9170 gets 11n support and merged upstream then this driver
> can be removed.
Then the TODO file should be updated.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to zdusb.c that fixes whitespace,
C99 comment, and other style issues found by the
checkpatch.pl tool
Signed-off-by: Scott Kidder <scott.kidder11@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This doesn't change the behavior. It just silences a sparse warning.
drivers/staging/wlan-ng/hfa384x_usb.c:2810:62: warning: dubious: !x | !y
The point of the bitwise OR is so that a logical OR could short circuit
the second call to test_and_set_bit().
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Some errors crept in due to a previous patch that I missed.
This fixes them up so the driver continues to build, sorry about that.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Switch driver over from wext to cfg80211 interface.
Some Notes:
- This patch moves the driver wholesale from wext to cfg80211. Wext
support is still provided through the cfg80211 provided wext
compatability layer.
- Currently only infrastructure mode is implemented. Ad hoc mode is not
yet implemented, but can be added.
- It does not support connecting to a specified bssid, instead roaming
is handled by the card itself. This matches the behaviour of the
existing driver.
- It has been tested using NetworkManager (via wpa_supplicant)
configured to use the wext compatability layer, and then again with the
native nl80211 layer.
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Current linux kernel has GENERIC_HDLC_VERSION equal to 4, no need to
have dead code in-kernel which was there for ancient kernel versions.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.
While at it, also remove surrounding code which is commented out,
or '#if 1' nops.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Remove all code which is dead for in-kernel driver due to being
ifdefed by LINUX_VERSION_CODE.
While at it, also remove surrounding code which is commented out,
or '#if 1' nops.
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The current code creates directories in procfs named after interfaces,
but doesn't handle renaming. This can result in name collisions and
consequent WARNINGs. It also means that the interface name cannot
reliably be used to remove the directory - in fact the current code
doesn't even try, and always uses "wlan0"!
Since the name of a proc_dir_entry is embedded in it, use that when
removing it.
Add a netdev notifier to catch interface renaming, and remove and
re-add the directory at this point.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Currently various resources may be leaked in case of an error.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
