Calcu_LinkQual is already defined a couple lines earlier.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Replace custom macro IS_MULTICAST_ADDRESS by is_multicast_ether_addr
from <linux/etherdevice.h>.
Remove linux/if_ether.h include as it is included in
linux/etherdevice.h already.
Signed-off-by: Charles Clément <caratorn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the phy_calibration.c that fixes up almost all
warnings and errors (except 80 characters limit and lack of tabs errors)
found by the checkpatch.pl tool
Signed-off-by: Timofey Trofimov <tumoxep@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes line length, brace style and whitespace issues in the
mac_structures.h file found by the checkpatch.pl tool
Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This patch fixes the use of //C99 comments in the mac_structures.h found by
the checkpatch.pl tool
Signed-off-by: Adam Latham <adam.latham@unisontorbay.org.uk>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit c7f486567c
(PCI PM: PCIe PME root port service driver) causes the native PCIe
PME signaling to be used by default, if the BIOS allows the kernel to
control the standard configuration registers of PCIe root ports.
However, the native PCIe PME is coupled to the native PCIe hotplug
and calling pcie_pme_acpi_setup() makes some BIOSes expect that
the native PCIe hotplug will be used as well. That, in turn, causes
problems to appear on systems where the PCIe hotplug driver is not
loaded. The usual symptom, as reported by Jaroslav Kameník and
others, is that the ACPI GPE associated with PCIe hotplug keeps
firing continuously causing kacpid to take substantial percentage
of CPU time.
To work around this issue, change the default so that the native
PCIe PME signaling is only used if directly requested with the help
of the pcie_pme= command line switch.
Fixes https://bugzilla.kernel.org/show_bug.cgi?id=15924 , which is
a listed regression from 2.6.33.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Reported-by: Jaroslav Kameník <jaroslav@kamenik.cz>
Tested-by: Antoni Grzymala <antekgrzymala@gmail.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
The C99 specification states in section 6.11.5:
The placement of a storage-class specifier other than at the beginning
of the declaration specifiers in a declaration is an obsolescent
feature.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Hank Janssen <hjanssen@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a patch to the pcl812.c file that fixes up the following
issues:
ERROR: code indent should use tabs where possible x 27
WARNING: line over 80 characters x 37
WARNING: please, no space before tabs x 13
WARNING: braces {} are not necessary for single statement blocks x 2
WARNING: printk() should include KERN_ facility level x 22
WARNING: braces {} are not necessary for any arm of this statement x 5
Signed-off-by: Gustavo Silva <silvagustavo@users.sourceforge.net>
Acked-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
per_cpu_ptr_to_phys() determines whether the passed in @addr belongs
to the first_chunk or not by just matching the address against the
address range of the base unit (unit0, used by cpu0). When an adress
from another cpu was passed in, it will always determine that the
address doesn't belong to the first chunk even when it does. This
makes the function return a bogus physical address which may lead to
crash.
This problem was discovered by Cliff Wickman while investigating a
crash during kdump on a SGI UV system.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Cliff Wickman <cpw@sgi.com>
Tested-by: Cliff Wickman <cpw@sgi.com>
Cc: stable@kernel.org
Now that we run scripts/setlocalversion during every build, it makes
sense to move all the localversion logic there. This cleans up the
toplevel Makefile and also makes sure that the script is called only
once in 'make prepare' (previously, it would be called every time due to
a variable expansion in an ifneq statement). No user-visible change is
intended, unless one runs the setlocalversion script directly.
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Fix a typo introduced by recent Makefile changes, in f9af3a4. Without it, Perl
scripting support won't get compiled in.
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1276836006.7762.15.camel@tropicana>
Signed-off-by: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Systems using the idle thread from process_32.c and process_64.c
do not generate power_end events which could be traced using
perf. This patch adds the event generation for such systems.
Signed-off-by: Robert Schoene <robert.schoene@tu-dresden.de>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1276515440.5441.45.camel@localhost>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
After every iounmap mmiotrace has to free kmmio_fault_pages, but
it can't do it directly, so it defers freeing by RCU.
It usually works, but when mmiotraced code calls ioremap-iounmap
multiple times without sleeping between (so RCU won't kick in
and start freeing) it can be given the same virtual address, so
at every iounmap mmiotrace will schedule the same pages for
release. Obviously it will explode on second free.
Fix it by marking kmmio_fault_pages which are scheduled for
release and not adding them second time.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Tested-by: Marcin Kocielnicki <koriakin@0x04.net>
Tested-by: Shinpei KATO <shinpei@il.is.s.u-tokyo.ac.jp>
Acked-by: Pekka Paalanen <pq@iki.fi>
Cc: Stuart Bennett <stuart@freedesktop.org>
Cc: Marcin Kocielnicki <koriakin@0x04.net>
Cc: nouveau@lists.freedesktop.org
Cc: <stable@kernel.org>
LKML-Reference: <20100613215654.GA3829@joi.lan>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
fastpath_timer_check()->thread_group_cputimer() is racy and
unneeded.
It is racy because another thread can clear ->running before
thread_group_cputimer() takes cputimer->lock. In this case
thread_group_cputimer() will set ->running = true again and call
thread_group_cputime(). But since we do not hold tasklist or
siglock, we can race with fork/exit and copy the wrong results
into cputimer->cputime.
It is unneeded because if ->running == true we can just use
the numbers in cputimer->cputime we already have.
Change fastpath_timer_check() to copy cputimer->cputime into
the local variable under cputimer->lock. We do not re-check
->running under cputimer->lock, run_posix_cpu_timers() does
this check later.
Note: we can add more optimizations on top of this change.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100611180446.GA13025@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
run_posix_cpu_timers() doesn't work if current has already passed
exit_notify(). This was needed to prevent the races with do_wait().
Since ea6d290c ->signal is always valid and can't go away. We can
remove the "tsk->exit_state == 0" in fastpath_timer_check() and
convert run_posix_cpu_timers() to use lock_task_sighand().
Note: it makes sense to take group_leader's sighand instead, the
sub-thread still uses CPU after release_task(). But we need more
changes to do this.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610231018.GA25942@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
thread_group_cputime() looks as if it is rcu-safe, but in fact this
was wrong until ea6d290c which pins task->signal to task_struct.
It checks ->sighand != NULL under rcu, but this can't help if ->signal
can go away. Fortunately the caller either holds ->siglock, or it is
fastpath_timer_check() which uses current and checks exit_state == 0.
- Since ea6d290c commit tsk->signal is stable, we can read it first
and avoid the initialization from INIT_CPUTIME.
- Even if tsk->signal is always valid, we still have to check it
is safe to use next_thread() under rcu_read_lock(). Currently
the code checks ->sighand != NULL, change it to use pid_alive()
which is commonly used to ensure the task wasn't unhashed before
we take rcu_read_lock().
Add the comment to explain this check.
- Change the main loop to use the while_each_thread() helper.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230956.GA25921@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
account_group_xxx() functions check ->exit_state to ensure that
current->signal is valid and can't go away. This is not needed
since ea6d290c, task->signal is pinned to task_struct.
The comment and another hack in account_group_exec_runtime() refers
to task_rq_unlock_wait() which was already removed by b7b8ff63.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230952.GA25914@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
__sched_setscheduler() takes lock_task_sighand() to access task->signal.
This is not needed since ea6d290c, ->signal can't go away.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20100610230944.GA25903@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Docbook fails in sched_fair.c due to comments added in the asymmetric
packing patch series.
This fixes these errors. No code changes.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <24737.1276135581@neuling.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The CPU power test is the wrong way around in fix_small_capacity.
This was due to a small changes made in the posted patch on lkml to what
was was taken upstream.
This patch fixes asymmetric packing for POWER7.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <12629.1276124617@neuling.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Commit e70971591 ("sched: Optimize unused cgroup configuration") introduced
an imbalanced scheduling bug.
If we do not use CGROUP, function update_h_load won't update h_load. When the
system has a large number of tasks far more than logical CPU number, the
incorrect cfs_rq[cpu]->h_load value will cause load_balance() to pull too
many tasks to the local CPU from the busiest CPU. So the busiest CPU keeps
going in a round robin. That will hurt performance.
The issue was found originally by a scientific calculation workload that
developed by Yanmin. With that commit, the workload performance drops
about 40%.
CPU before after
00 : 2 : 7
01 : 1 : 7
02 : 11 : 6
03 : 12 : 7
04 : 6 : 6
05 : 11 : 7
06 : 10 : 6
07 : 12 : 7
08 : 11 : 6
09 : 12 : 6
10 : 1 : 6
11 : 1 : 6
12 : 6 : 6
13 : 2 : 6
14 : 2 : 6
15 : 1 : 6
Reviewed-by: Yanmin zhang <yanmin.zhang@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1276754893.9452.5442.camel@debian>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch registers the WM8750 codec on a proper place on the ZipitZ2
machine after the WM8750 driver was converted to new API.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
This patch adds support for the AER915 battery chip into Zipit Z2
platform file.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Use the resume callback of the pda_power supply framework to check for a
'charge finished' event that might have occured during the sleep phase.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
This is support for custom design based on Toradex Colibri PXA270 CPU card.
Initial patch was by Pavel Revak.
[daniel - rebased the code to follow the module/board split]
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Pavel Revak <palo@bielyvlk.sk>
Cc: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
Follow the idea of several MX31 based boards and split code that is
related to the module from code that is baseboard specific. This makes
adding new base board support easier, while avoiding code duplication.
Signed-off-by: Daniel Mack <daniel@caiaq.de>
Acked-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
This patch just moves code around and polishes it. Also, compile in only
selected pieces of hardware.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
