commit 0a533c3e42 upstream.
If we use the 'B' mode and we have an invalit table line,
cancel_delayed_work_sync would trigger a warning. This commit avoids the
warning.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8e089e7b58 upstream.
The function brcmf_usb_dl_writeimage() calls the function
brcmf_usb_dl_cmd() but dose not check its return value. The
'state.state' and the 'state.bytes' are uninitialized if the
function brcmf_usb_dl_cmd() fails. It is dangerous to use
uninitialized variables in the conditions.
Add error handling for brcmf_usb_dl_cmd() to jump to error
handling path if the brcmf_usb_dl_cmd() fails and the
'state.state' and the 'state.bytes' are uninitialized.
Improve the error message to report more detailed error
information.
Fixes: 71bb244ba2 ("brcm80211: fmac: add USB support for bcm43235/6/8 chipsets")
Cc: stable@vger.kernel.org # v3.4+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422042203.2259-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f04dd30f1b upstream.
According to the XGMAC specification, enabling features such as Layer 3
and Layer 4 Packet Filtering, Split Header and Virtualized Network support
automatically selects the IPC Full Checksum Offload Engine on the receive
side.
When RX checksum offload is disabled, these dependent features must also
be disabled to prevent abnormal behavior caused by mismatched feature
dependencies.
Ensure that toggling RX checksum offload (disabling or enabling) properly
disables or enables all dependent features, maintaining consistent and
expected behavior in the network device.
Cc: stable@vger.kernel.org
Fixes: 1a510ccf58 ("amd-xgbe: Add support for VXLAN offload capabilities")
Signed-off-by: Vishal Badole <Vishal.Badole@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250424130248.428865-1-Vishal.Badole@amd.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de3629baf5 upstream.
Camm noticed that on parisc a SIGFPE exception will crash an application with
a second SIGFPE in the signal handler. Dave analyzed it, and it happens
because glibc uses a double-word floating-point store to atomically update
function descriptors. As a result of lazy binding, we hit a floating-point
store in fpe_func almost immediately.
When the T bit is set, an assist exception trap occurs when when the
co-processor encounters *any* floating-point instruction except for a double
store of register %fr0. The latter cancels all pending traps. Let's fix this
by clearing the Trap (T) bit in the FP status register before returning to the
signal handler in userspace.
The issue can be reproduced with this test program:
root@parisc:~# cat fpe.c
static void fpe_func(int sig, siginfo_t *i, void *v) {
sigset_t set;
sigemptyset(&set);
sigaddset(&set, SIGFPE);
sigprocmask(SIG_UNBLOCK, &set, NULL);
printf("GOT signal %d with si_code %ld\n", sig, i->si_code);
}
int main() {
struct sigaction action = {
.sa_sigaction = fpe_func,
.sa_flags = SA_RESTART|SA_SIGINFO };
sigaction(SIGFPE, &action, 0);
feenableexcept(FE_OVERFLOW);
return printf("%lf\n",1.7976931348623158E308*1.7976931348623158E308);
}
root@parisc:~# gcc fpe.c -lm
root@parisc:~# ./a.out
Floating point exception
root@parisc:~# strace -f ./a.out
execve("./a.out", ["./a.out"], 0xf9ac7034 /* 20 vars */) = 0
getrlimit(RLIMIT_STACK, {rlim_cur=8192*1024, rlim_max=RLIM_INFINITY}) = 0
...
rt_sigaction(SIGFPE, {sa_handler=0x1110a, sa_mask=[], sa_flags=SA_RESTART|SA_SIGINFO}, NULL, 8) = 0
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0x1078f} ---
--- SIGFPE {si_signo=SIGFPE, si_code=FPE_FLTOVF, si_addr=0xf8f21237} ---
+++ killed by SIGFPE +++
Floating point exception
Signed-off-by: Helge Deller <deller@gmx.de>
Suggested-by: John David Anglin <dave.anglin@bell.net>
Reported-by: Camm Maguire <camm@maguirefamily.org>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fee4d17145 upstream.
Commit a5951389e5 ("arm64: errata: Add newer ARM cores to the
spectre_bhb_loop_affected() lists") added some additional CPUs to the
Spectre-BHB workaround, including some new arrays for designs that
require new 'k' values for the workaround to be effective.
Unfortunately, the new arrays omitted the sentinel entry and so
is_midr_in_range_list() will walk off the end when it doesn't find a
match. With UBSAN enabled, this leads to a crash during boot when
is_midr_in_range_list() is inlined (which was more common prior to
c8c2647e69 ("arm64: Make _midr_in_range_list() an exported
function")):
| Internal error: aarch64 BRK: 00000000f2000001 [#1] PREEMPT SMP
| pstate: 804000c5 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : spectre_bhb_loop_affected+0x28/0x30
| lr : is_spectre_bhb_affected+0x170/0x190
| [...]
| Call trace:
| spectre_bhb_loop_affected+0x28/0x30
| update_cpu_capabilities+0xc0/0x184
| init_cpu_features+0x188/0x1a4
| cpuinfo_store_boot_cpu+0x4c/0x60
| smp_prepare_boot_cpu+0x38/0x54
| start_kernel+0x8c/0x478
| __primary_switched+0xc8/0xd4
| Code: 6b09011f 54000061 52801080 d65f03c0 (d4200020)
| ---[ end trace 0000000000000000 ]---
| Kernel panic - not syncing: aarch64 BRK: Fatal exception
Add the missing sentinel entries.
Cc: Lee Jones <lee@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Cc: <stable@vger.kernel.org>
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixes: a5951389e5 ("arm64: errata: Add newer ARM cores to the spectre_bhb_loop_affected() lists")
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20250501104747.28431-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbe5679f30 upstream.
Nouveau is mostly designed in a way that it's expected that fences only
ever get signaled through nouveau_fence_signal(). However, in at least
one other place, nouveau_fence_done(), can signal fences, too. If that
happens (race) a signaled fence remains in the pending list for a while,
until it gets removed by nouveau_fence_update().
Should nouveau_fence_context_kill() run in the meantime, this would be
a bug because the function would attempt to set an error code on an
already signaled fence.
Have nouveau_fence_context_kill() check for a fence being signaled.
Cc: stable@vger.kernel.org # v5.10+
Fixes: ea13e5abf8 ("drm/nouveau: signal pending fences when channel has been killed")
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250415121900.55719-3-phasta@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1149719442 upstream.
There seem to be multiple USB device IDs used for these;
the one I have reports as 0b0e:030c when powered on.
(When powered off, it reports as 0b0e:0311.)
Signed-off-by: Joachim Priesner <joachim.priesner@web.de>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20250428053606.9237-1-joachim.priesner@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e54223275b upstream.
When contiguous windows are coalesced by pci_register_host_bridge(), the
second resource is expanded to include the first, and the first is
invalidated and consequently not added to the bus. However, it remains in
the resource hierarchy. For example, these windows:
fec00000-fec7ffff : PCI Bus 0000:00
fec80000-fecbffff : PCI Bus 0000:00
are coalesced into this, where the first resource remains in the tree with
start/end zeroed out:
00000000-00000000 : PCI Bus 0000:00
fec00000-fecbffff : PCI Bus 0000:00
In some cases (e.g. the Xen scratch region), this causes future calls to
allocate_resource() to choose an inappropriate location which the caller
cannot handle.
Fix by releasing the zeroed-out resource and removing it from the resource
hierarchy.
[bhelgaas: commit log]
Fixes: 7c3855c423 ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/20230525153248.712779-1-ross.lagerwall@citrix.com
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9d8ba74a18 upstream.
On r8a7791/koelsch:
kmemleak: 1 new suspected memory leaks (see /sys/kernel/debug/kmemleak)
# cat /sys/kernel/debug/kmemleak
unreferenced object 0xc3a34e00 (size 64):
comm "swapper/0", pid 1, jiffies 4294937460 (age 199.080s)
hex dump (first 32 bytes):
b4 5d 81 f0 b4 5d 81 f0 c0 b0 a2 c3 00 00 00 00 .]...]..........
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<fe3aa979>] __kmalloc+0xf0/0x140
[<34bd6bc0>] resource_list_create_entry+0x18/0x38
[<767046bc>] pci_add_resource_offset+0x20/0x68
[<b3f3edf2>] devm_of_pci_get_host_bridge_resources.constprop.0+0xb0/0x390
When coalescing two resources for a contiguous aperture, the second
resource is enlarged to cover the full contiguous range, while the first
resource is marked invalid. This invalidation is done by clearing the
flags, start, and end members.
When adding the initial resources to the bus later, invalid resources are
skipped. Unfortunately, the check for an invalid resource considers only
the end member, causing false positives.
E.g. on r8a7791/koelsch, root bus resource 0 ("bus 00") is skipped, and no
longer registered with pci_bus_insert_busn_res() (causing the memory leak),
nor printed:
pci-rcar-gen2 ee090000.pci: host bridge /soc/pci@ee090000 ranges:
pci-rcar-gen2 ee090000.pci: MEM 0x00ee080000..0x00ee08ffff -> 0x00ee080000
pci-rcar-gen2 ee090000.pci: PCI: revision 11
pci-rcar-gen2 ee090000.pci: PCI host bridge to bus 0000:00
-pci_bus 0000:00: root bus resource [bus 00]
pci_bus 0000:00: root bus resource [mem 0xee080000-0xee08ffff]
Fix this by only skipping resources where all of the flags, start, and end
members are zero.
Fixes: 7c3855c423 ("PCI: Coalesce host bridge contiguous apertures")
Link: https://lore.kernel.org/r/da0fcd5e86c74239be79c7cb03651c0fce31b515.1676036673.git.geert+renesas@glider.be
Tested-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26d7fb4fd4 upstream.
Commit 62baf70c32 caused the ANA log page to be re-read, even on
controllers that do not support ANA. While this should generally
harmless, some controllers hang on the unsupported log page and
never finish probing.
Fixes: 62baf70c32 ("nvme: re-read ANA log page after ns scan completes")
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Tested-by: Srikanth Aithal <sraithal@amd.com>
[hch: more detailed commit message]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b73c3ccdca upstream.
Commit e27fbe16af ("MIPS: cm: Detect CM quirks from device tree")
introduced
arch/mips/include/asm/mips-cm.h:119:13: error: ‘mips_cm_update_property’
defined but not used [-Werror=unused-function]
Fix this by making empty function implementation inline
Fixes: e27fbe16af ("MIPS: cm: Detect CM quirks from device tree")
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ricardo reported a KASAN discovered use after free in v6.6-stable.
The syzbot starts a BPF program via xdp_test_run_batch() which assigns
ri->tgt_value via dev_hash_map_redirect() and the return code isn't
XDP_REDIRECT it looks like nonsense. So the output in
bpf_warn_invalid_xdp_action() appears once.
Then the TUN driver runs another BPF program (on the same CPU) which
returns XDP_REDIRECT without setting ri->tgt_value first. It invokes
bpf_trace_printk() to print four characters and obtain the required
return value. This is enough to get xdp_do_redirect() invoked which
then accesses the pointer in tgt_value which might have been already
deallocated.
This problem does not affect upstream because since commit
401cb7dae8 ("net: Reference bpf_redirect_info via task_struct on PREEMPT_RT.")
the per-CPU variable is referenced via task's task_struct and exists on
the stack during NAPI callback. Therefore it is cleared once before the
first invocation and remains valid within the RCU section of the NAPI
callback.
Instead of performing the huge backport of the commit (plus its fix ups)
here is an alternative version which only resets the variable in
question prior invoking the BPF program.
Acked-by: Toke Høiland-Jørgensen <toke@kernel.org>
Reported-by: Ricardo Cañuelo Navarro <rcn@igalia.com>
Closes: https://lore.kernel.org/all/20250226-20250204-kasan-slab-use-after-free-read-in-dev_map_enqueue__submit-v3-0-360efec441ba@igalia.com/
Fixes: 97f91a7cf0 ("bpf: add bpf_redirect_map helper routine")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ae01ec007 upstream.
The atu_move_port_mask for 6341 family (Topaz) is 0xf, not 0x1f. The
PortVec field is 8 bits wide, not 11 as in 6390 family. Fix this.
Fixes: e606ca36bb ("net: dsa: mv88e6xxx: rework ATU Remove")
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250317173250.28780-3-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8006aff155 upstream.
According to the review by Bill Cox [1], the Atmel SHA204A random number
generator produces random numbers with very low entropy.
Set the lowest possible entropy for this chip just to be safe.
[1] https://www.metzdowd.com/pipermail/cryptography/2014-December/023858.html
Fixes: da001fb651 ("crypto: atmel-i2c - add support for SHA204A random number generator")
Cc: <stable@vger.kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
commit 44d9b3f584 upstream.
When `jr3_pci_detach()` is called during device removal, it calls
`timer_delete_sync()` to stop the timer, but the timer expiry function
always reschedules the timer, so the synchronization is ineffective.
Call `timer_shutdown_sync()` instead. It does not matter that the timer
expiry function pointer is cleared, because the device is being removed.
Fixes: 07b509e658 ("Staging: comedi: add jr3_pci driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20250415123901.13483-1-abbotti@mev.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a779ed754e upstream.
In order to make array bounds checking sane, provide a separate
definition of the in-inode xtree root and the external xtree page.
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Tested-by: Manas Ghandat <ghandatmanas@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=ccb458b6679845ee0bae
Reported-by: syzbot+ccb458b6679845ee0bae@syzkaller.appspotmail.com
Signed-off-by: Aditya Dutt <duttaditya18@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b7c178d9e5 ]
During recovery/check operations, the process_checks function loops
through available disks to find a 'primary' source with successfully
read data.
If no suitable source disk is found after checking all possibilities,
the 'primary' index will reach conf->raid_disks * 2. Add an explicit
check for this condition after the loop. If no source disk was found,
print an error message and return early to prevent further processing
without a valid primary source.
Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volumez.com
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b044614be ]
Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the
kernel:
[ 31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan]
[ 31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT
[ 31.648153] Hardware name: linux,dummy-virt (DT)
[ 31.648970] Call trace:
[ 31.649345] show_stack+0x18/0x24 (C)
[ 31.650960] dump_stack_lvl+0x40/0x84
[ 31.651559] dump_stack+0x18/0x24
[ 31.652264] panic+0x138/0x3b4
[ 31.652812] __ktime_get_real_seconds+0x0/0x10
[ 31.653540] test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan]
[ 31.654388] init_module+0x24/0xff4 [test_ubsan]
[ 31.655077] do_one_initcall+0xd4/0x280
[ 31.655680] do_init_module+0x58/0x2b4
That happens because the test corrupts other data in the stack:
400: d5384108 mrs x8, sp_el0
404: f9426d08 ldr x8, [x8, #1240]
408: f85f83a9 ldur x9, [x29, #-8]
40c: eb09011f cmp x8, x9
410: 54000301 b.ne 470 <test_ubsan_out_of_bounds+0x154> // b.any
As there is no guarantee the compiler will order the local variables
as declared in the module:
volatile char above[4] = { }; /* Protect surrounding memory. */
volatile int arr[4];
volatile char below[4] = { }; /* Protect surrounding memory. */
There is another problem where the out-of-bound index is 5 which is larger
than the extra surrounding memory for protection.
So, use a struct to enforce the ordering, and fix the index to be 4.
Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR()
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1fdb8188c3 ]
Set cmd->iocb.ki_ioprio to the ioprio of loop device's request.
The purpose is to inherit the original request ioprio in the aio
flow.
Signed-off-by: Yunlong Xing <yunlong.xing@unisoc.com>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250414030159.501180-1-yunlong.xing@unisoc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7b705c238 ]
When a fatal error occurs, a phy down event may not be received to set
phy->phy_attached to zero.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daff37f00c ]
The hw port ID of phy may change when inserting disks in batches, causing
the port ID in hisi_sas_port and itct to be inconsistent with the hardware,
resulting in I/O errors. The solution is to set the device state to gone to
intercept I/O sent to the device, and then execute linkreset to discard and
find the disk to re-update its information.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-3-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccad447a3d ]
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70289ae5ca ]
Do not leak the tgtport reference when the work is already scheduled.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b26ad0e1 ]
The reference counting code can be simplified. Instead taking a tgtport
refrerence at the beginning of nvmet_fc_alloc_hostport and put it back
if not a new hostport object is allocated, only take it when a new
hostport object is allocated.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27ce8299bc ]
User->user Spectre v2 attacks (including RSB) across context switches
are already mitigated by IBPB in cond_mitigation(), if enabled globally
or if either the prev or the next task has opted in to protection. RSB
filling without IBPB serves no purpose for protecting user space, as
indirect branches are still vulnerable.
User->kernel RSB attacks are mitigated by eIBRS. In which case the RSB
filling on context switch isn't needed, so remove it.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/98cdefe42180358efebf78e3b80752850c7a3e1b.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18bae0dfec ]
eIBRS protects against guest->host RSB underflow/poisoning attacks.
Adding retpoline to the mix doesn't change that. Retpoline has a
balanced CALL/RET anyway.
So the current full RSB filling on VMEXIT with eIBRS+retpoline is
overkill. Disable it or do the VMEXIT_LITE mitigation if needed.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/84a1226e5c9e2698eae1b5ade861f1b8bf3677dc.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc9fd3f984 ]
write_ibpb() does IBPB, which (among other things) flushes branch type
predictions on AMD. If the CPU has SRSO_NO, or if the SRSO mitigation
has been disabled, branch type flushing isn't needed, in which case the
lighter-weight SBPB can be used.
The 'x86_pred_cmd' variable already keeps track of whether IBPB or SBPB
should be used. Use that instead of hardcoding IBPB.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/17c5dcd14b29199b75199d67ff7758de9d9a4928.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 197c1eaa7b ]
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62baf70c32 ]
When scanning for new namespaces we might have missed an ANA AEN.
The NVMe base spec (NVMe Base Specification v2.1, Figure 151 'Asynchonous
Event Information - Notice': Asymmetric Namespace Access Change) states:
A controller shall not send this even if an Attached Namespace
Attribute Changed asynchronous event [...] is sent for the same event.
so we need to re-read the ANA log page after we rescanned the namespace
list to update the ANA states of the new namespaces.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ab4f0e37a ]
The end of table checks should be done with the structure size,
but 2 of the 3 similar calls use the pointer size.
Signed-off-by: Jean-Marc Eurin <jmeurin@google.com>
Link: https://patch.msgid.link/20250402001542.2600671-1-jmeurin@google.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9546ad1a9b ]
Scanning for namespaces can take some time, so if the target is
reconfigured while the scan is running we may miss a Attached Namespace
Attribute Changed AEN.
Check if the NVME_AER_NOTICE_NS_CHANGED bit is set once the scan has
finished, and requeue scanning to pick up any missed change.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f2946bb17 ]
xen-acpi-processor functions under a PVH dom0 with only a
xen_initial_domain() runtime check. Change the Kconfig dependency from
PV dom0 to generic dom0 to reflect that.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250331172913.51240-1-jason.andryuk@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72070e57b0 ]
Commit 57ed58c132 ("selftests: ublk: enable zero copy for stripe target")
added test entry of test_stripe_04, but forgot to add the test script.
So fix the test by adding the script file.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250404001849.1443064-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 975776841e ]
kernel/sched/isolation.c obviously makes no sense without CONFIG_SMP, but
the Kconfig entry we have right now:
config CPU_ISOLATION
bool "CPU isolation"
depends on SMP || COMPILE_TEST
allows the creation of pointless .config's which cause
build failures.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250330134955.GA7910@redhat.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503260646.lrUqD3j5-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aff12700b8 ]
idt_scan_mws() puts a large fixed-size array on the stack and copies
it into a smaller dynamically allocated array at the end. On 32-bit
targets, the fixed size can easily exceed the warning limit for
possible stack overflow:
drivers/ntb/hw/idt/ntb_hw_idt.c:1041:27: error: stack frame size (1032) exceeds limit (1024) in 'idt_scan_mws' [-Werror,-Wframe-larger-than]
Change it to instead just always use dynamic allocation for the
array from the start. It's too big for the stack, but not actually
all that much for a permanent allocation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202205111109.PiKTruEj-lkp@intel.com/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdb43af4fd ]
failure to allocate inode => leaked dentry...
this one had been there since the initial merge; to be fair,
if we are that far OOM, the odds of failing at that particular
allocation are low...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 060aed9c00 ]
If 'port_id' is negative, the shift counts in wcd934x_slim_irq_handler()
also become negative, resulting in undefined behavior due to shift out
of bounds.
If I'm reading the code correctly, that appears to be not possible, but
with KCOV enabled, Clang's range analysis isn't always able to determine
that and generates undefined behavior.
As a result the code generation isn't optimal, and undefined behavior
should be avoided regardless. Improve code generation and remove the
undefined behavior by converting the signed variables to unsigned.
Fixes the following warning with UBSAN:
sound/soc/codecs/snd-soc-wcd934x.o: warning: objtool: .text.wcd934x_slim_irq_handler: unexpected end of section
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/7e863839ec7301bf9c0f429a03873d44e484c31c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/oe-kbuild-all/202503180044.oH9gyPeg-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c75f3e6a4 ]
The variable d->name, returned by devm_kasprintf(), could be NULL.
A pointer check is added to prevent potential NULL pointer dereference.
This is similar to the fix in commit 3027e7b15b
("ice: Fix some null pointer dereference issues in ice_ptp.c").
This issue is found by our static analysis tool
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Link: https://lore.kernel.org/r/20250311012705.1233829-1-chenyuan0y@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
