commit f0b50730bd upstream.
The function mlx5_query_nic_vport_qkey_viol_cntr() calls the function
mlx5_query_nic_vport_context() but does not check its return value. This
could lead to undefined behavior if the query fails. A proper
implementation can be found in mlx5_nic_vport_query_local_lb().
Add error handling for mlx5_query_nic_vport_context(). If it fails, free
the out buffer via kvfree() and return error code.
Fixes: 9efa752545 ("net/mlx5_core: Introduce access functions to query vport RoCE fields")
Cc: stable@vger.kernel.org # v4.5
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250521133620.912-1-vulab@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e8ac7336dd upstream.
The enable pin can be configured as always enabled by the hardware. Make
the enable gpio request optional so the driver doesn't fail to probe
when `enable-gpios` property is not present in the device tree.
Cc: stable@vger.kernel.org
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-2-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71406b6d11 upstream.
>From MAX20086-MAX20089 datasheet, the id for a MAX20086 is 0x30 and not
0x40. With the current code, the driver will fail on probe when the
driver tries to identify the chip id from a MAX20086 device over I2C.
Cc: stable@vger.kernel.org
Fixes: bfff546aae ("regulator: Add MAX20086-MAX20089 driver")
Signed-off-by: João Paulo Gonçalves <jpaulo.silvagoncalves@gmail.com>
Link: https://patch.msgid.link/20250420-fix-max20086-v1-1-8cc9ee0d5a08@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 774a1fa880 upstream.
Prior changes ensured that when zpci_release_device() is called and it
removed the zdev from the zpci_list this instance can not be found via
the zpci_list anymore even while allowing re-add of reserved devices.
This only accounts for the overall lifetime and zpci_list addition and
removal, it does not yet prevent concurrent add of a new instance for
the same underlying device. Such concurrent add would subsequently cause
issues such as attempted re-use of the same IOMMU sysfs directory and is
generally undesired.
Introduce a new zpci_add_remove_lock mutex to serialize adding a new
device with removal. Together this ensures that if a struct zpci_dev is
not found in the zpci_list it was either already removed and torn down,
or its removal and tear down is in progress with the
zpci_add_remove_lock held.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4b1815a52d upstream.
The architecture assumes that PCI functions can be removed synchronously
as PCI events are processed. This however clashes with the reference
counting of struct pci_dev which allows device drivers to hold on to a
struct pci_dev reference even as the underlying device is removed. To
bridge this gap commit 2a671f77ee ("s390/pci: fix use after free of
zpci_dev") keeps the struct zpci_dev in ZPCI_FN_STATE_RESERVED state
until common code releases the struct pci_dev. Only when all references
are dropped, the struct zpci_dev can be removed and freed.
Later commit a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
moved the deletion of the struct zpci_dev from the zpci_list in
zpci_release_device() to the point where the device is reserved. This
was done to prevent handling events for a device that is already being
removed, e.g. when the platform generates both PCI event codes 0x304
and 0x308. In retrospect, deletion from the zpci_list in the release
function without holding the zpci_list_lock was also racy.
A side effect of this handling is that if the underlying device
re-appears while the struct zpci_dev is in the ZPCI_FN_STATE_RESERVED
state, the new and old instances of the struct zpci_dev and/or struct
pci_dev may clash. For example when trying to create the IOMMU sysfs
files for the new instance. In this case, re-adding the new instance is
aborted. The old instance is removed, and the device will remain absent
until the platform issues another event.
Fix this by allowing the struct zpci_dev to be brought back up right
until it is finally removed. To this end also keep the struct zpci_dev
in the zpci_list until it is finally released when all references have
been dropped.
Deletion from the zpci_list from within the release function is made
safe by using kref_put_lock() with the zpci_list_lock. This ensures that
the releasing code holds the last reference.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47c3978448 upstream.
As disable_slot() takes a struct zpci_dev from the Configured to the
Standby state. In Standby there is still a hotplug slot so this is not
usually a case of sysfs self deletion. This is important because self
deletion gets very hairy in terms of locking (see for example
recover_store() in arch/s390/pci/pci_sysfs.c).
Because the pci_dev_put() is not within the critical section of the
zdev->state_lock however, disable_slot() can turn into a case of self
deletion if zPCI device event handling slips between the mutex_unlock()
and the pci_dev_put(). If the latter is the last put and
zpci_release_device() is called this then tries to remove the hotplug
slot via zpci_exit_slot() which will try to remove the hotplug slot
directory the disable_slot() is part of i.e. self deletion.
Prevent this by widening the zdev->state_lock critical section to
include the pci_dev_put() which is then guaranteed to happen with the
struct zpci_dev still in Standby state ensuring it will not lead to
a zpci_release_device() call as at least the zPCI event handling code
still holds a reference.
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d76f963329 upstream.
Remove zpci_bus_remove_device() and zpci_disable_device() calls from
zpci_release_device(). These calls were done when the device
transitioned into the ZPCI_FN_STATE_STANDBY state which is guaranteed to
happen before it enters the ZPCI_FN_STATE_RESERVED state. When
zpci_release_device() is called the device is known to be in the
ZPCI_FN_STATE_RESERVED state which is also checked by a WARN_ON().
Cc: stable@vger.kernel.org
Fixes: a46044a92a ("s390/pci: fix zpci_zdev_put() on reserve")
Reviewed-by: Gerd Bayer <gbayer@linux.ibm.com>
Reviewed-by: Julian Ruess <julianr@linux.ibm.com>
Tested-by: Gerd Bayer <gbayer@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cc0eafd28 upstream.
When a system is being suspended to RAM, the PCI devices are also
suspended and the PPC code ends up calling pseries_msi_compose_msg() and
this triggers the BUG_ON() in __pci_read_msi_msg() because the device at
this point is in reduced power state. In reduced power state, the memory
mapped registers of the PCI device are not accessible.
To replicate the bug:
1. Make sure deep sleep is selected
# cat /sys/power/mem_sleep
s2idle [deep]
2. Make sure console is not suspended (so that dmesg logs are visible)
echo N > /sys/module/printk/parameters/console_suspend
3. Suspend the system
echo mem > /sys/power/state
To fix this behaviour, read the cached msi message of the device when the
device is not in PCI_D0 power state instead of touching the hardware.
Fixes: a5f3d2c17b ("powerpc/pseries/pci: Add MSI domains")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gautam Menghani <gautam@linux.ibm.com>
Tested-by: Venkat Rao Bagalkote <venkat88@linux.ibm.com>
Reviewed-by: Vaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250305090237.294633-1-gautam@linux.ibm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 475a8d3037 upstream.
Follow the non-ringed pbuf struct io_buffer_list allocations and account
it against the memcg. There is low chance of that being an actual
problem as ring provided buffer should either pin user memory or
allocate it, which is already accounted.
Cc: stable@vger.kernel.org # 6.1
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/3985218b50d341273cafff7234e1a7e6d0db9808.1747150490.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6b83ba4bc3 upstream.
Initialize current_be_id to 0 in SOF based AMD generic SoundWire machine
driver to handle the unlikely case when there are no devices connected to
a DAI.
In this case create_sdw_dailink() would return without touching the passed
pointer to current_be_id.
Found by gcc -fanalyzer
Cc: stable@vger.kernel.org
Fixes: 6d8348ddc5 ("ASoC: amd: acp: refactor SoundWire machine driver code")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20250506120823.3621604-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 171eb6f71e upstream.
Commit c141ecc3ce ("of: Warn when of_property_read_bool() is used on
non-boolean properties") added a warning when trying to parse a property
with a value (boolean properties are defined as: absent = false, present
without any value = true). This causes a warning from meson-card-utils.
meson-card-utils needs to know about the existence of the
"audio-routing" and/or "audio-widgets" properties in order to properly
parse them. Switch to of_property_present() in order to silence the
following warning messages during boot:
OF: /sound: Read of boolean property 'audio-routing' with a value.
OF: /sound: Read of boolean property 'audio-widgets' with a value.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://patch.msgid.link/20250419213448.59647-1-martin.blumenstingl@googlemail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 688abe2860 upstream.
The function sdm845_slim_snd_hw_params() calls the functuion
snd_soc_dai_set_channel_map() but does not check its return
value. A proper implementation can be found in msm_snd_hw_params().
Add error handling for snd_soc_dai_set_channel_map(). If the
function fails and it is not a unsupported error, return the
error code immediately.
Fixes: 5caf64c633 ("ASoC: qcom: sdm845: add support to DB845c and Lenovo Yoga")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20250519075739.1458-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c4e8b2287 upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
dh895xcc 0000:3f:00.0: qat_hal_clr_reset error
dh895xcc 0000:3f:00.0: Failed to init the AEs
dh895xcc 0000:3f:00.0: Failed to initialise Acceleration Engine
dh895xcc 0000:3f:00.0: Resetting device qat_dev0
dh895xcc 0000:3f:00.0: probe with driver dh895xcc failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 7afa232e76 ("crypto: qat - Intel(R) QAT DH895xcc accelerator")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a9a6e9279b upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c6xx 0000:3f:00.0: qat_hal_clr_reset error
c6xx 0000:3f:00.0: Failed to init the AEs
c6xx 0000:3f:00.0: Failed to initialise Acceleration Engine
c6xx 0000:3f:00.0: Resetting device qat_dev0
c6xx 0000:3f:00.0: probe with driver c6xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: a6dabee6c8 ("crypto: qat - add support for c62x accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 845bc95202 upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
4xxx 0000:01:00.0: Failed to power up the device
4xxx 0000:01:00.0: Failed to initialize device
4xxx 0000:01:00.0: Resetting device qat_dev0
4xxx 0000:01:00.0: probe with driver 4xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 8c8268166e ("crypto: qat - add qat_4xxx driver")
Link: https://lore.kernel.org/all/Z-DGQrhRj9niR9iZ@gondor.apana.org.au/
Reported-by: Randy Wright <rwright@hpe.com>
Closes: https://issues.redhat.com/browse/RHEL-84366
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 097143f23a upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
420xx 0000:01:00.0: Failed to power up the device
420xx 0000:01:00.0: Failed to initialize device
420xx 0000:01:00.0: Resetting device qat_dev0
420xx 0000:01:00.0: probe with driver 420xx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: fcf60f4bcf ("crypto: qat - add support for 420xx devices")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 71e0cc1eab upstream.
During a warm reset via kexec, the system bypasses the driver removal
sequence, meaning that the remove() callback is not invoked.
If a QAT device is not shutdown properly, the device driver will fail to
load in a newly rebooted kernel.
This might result in output like the following after the kexec reboot:
QAT: AE0 is inactive!!
QAT: failed to get device out of reset
c3xxx 0000:3f:00.0: qat_hal_clr_reset error
c3xxx 0000:3f:00.0: Failed to init the AEs
c3xxx 0000:3f:00.0: Failed to initialise Acceleration Engine
c3xxx 0000:3f:00.0: Resetting device qat_dev0
c3xxx 0000:3f:00.0: probe with driver c3xxx failed with error -14
Implement the shutdown() handler that hooks into the reboot notifier
list. This brings down the QAT device and ensures it is shut down
properly.
Cc: <stable@vger.kernel.org>
Fixes: 890c55f4dc ("crypto: qat - add support for c3xxx accel type")
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac5ee087d3 upstream.
This patch moves the msleep_interruptible() out of the non-sleepable
context by moving the ls->ls_recover_spin spinlock around so
msleep_interruptible() will be called in a sleepable context.
Cc: stable@vger.kernel.org
Fixes: 4a7727725d ("GFS2: Fix recovery issues for spectators")
Suggested-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0413bcf0fc upstream.
This driver tries to chain requests together before submitting them
to hardware in order to reduce completion interrupts.
However, it even extends chains that have already been submitted
to hardware. This is dangerous because there is no way of knowing
whether the hardware has already read the DMA memory in question
or not.
Fix this by splitting the chain list into two. One for submitted
requests and one for requests that have not yet been submitted.
Only extend the latter.
Reported-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Fixes: 85030c5168 ("crypto: marvell - Add support for chaining crypto requests in TDMA mode")
Cc: <stable@vger.kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f830edbae2 upstream.
populate_attrs() may override failure for creating attribute files
by success for creating subsequent bin attribute files, and have
wrong return value.
Fix by creating bin attribute files under successfully creating
attribute files.
Fixes: 03607ace80 ("configfs: implement binary attributes")
Cc: stable@vger.kernel.org
Reviewed-by: Joel Becker <jlbec@evilplan.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250507-fix_configfs-v3-2-fe2d96de8dc4@quicinc.com
Signed-off-by: Andreas Hindborg <a.hindborg@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3159c96ac2 upstream.
When debugfs is disabled, the function has no reference any more:
drivers/thermal/mediatek/lvts_thermal.c:266:13: error: 'lvts_debugfs_exit' defined but not used [-Werror=unused-function]
266 | static void lvts_debugfs_exit(struct lvts_domain *lvts_td) { }
| ^~~~~~~~~~~~~~~~~
Fixes: ef280c17a840 ("thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250505052502.1812867-1-arnd@kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb0851e144 upstream.
Coverity scan reported the usage of "mode->clock * 1000" may lead to
integer overflow. Use "1000ULL" instead of "1000"
when utilizing it to avoid potential integer overflow issue.
Link: https://scan5.scan.coverity.com/#/project-view/10074/10063?selectedIssue=1646759
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: 1017560164 ("drm/meson: use unsigned long long / Hz for frequency types")
Link: https://lore.kernel.org/r/20250505184338.678540-1-richard120310@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9126d2754c upstream.
When gfs2_sys_fs_add() fails, it sets sb->s_fs_info to NULL on its error
path (see commit 0d515210b6 ("GFS2: Add kobject release method")).
The intention seems to be to prevent dereferencing sb->s_fs_info once
the object pointed to has been deallocated, but that would be better
achieved by setting the pointer to NULL in free_sbd().
As a consequence, when the call to gfs2_sys_fs_add() fails in
gfs2_fill_super(), sdp = GFS2_SB(inode) will evaluate to NULL in iput()
-> gfs2_drop_inode(), and accessing sdp->sd_flags will be a NULL pointer
dereference.
Fix that by only setting sb->s_fs_info to NULL when actually freeing the
object pointed to in free_sbd().
Fixes: ae9f3bd825 ("gfs2: replace sd_aspace with sd_inode")
Reported-by: syzbot+b12826218502df019f9d@syzkaller.appspotmail.com
Signed-off-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c78e793f7 upstream.
While not yet in the tree, there is a proposed patch[1] that was
depending on the prior behavior of _DEFINE_FLEX, which did not have an
explicit initializer. Provide this via __DEFINE_FLEX now, which can also
have attributes applied (e.g. __uninitialized).
Examples of the resulting initializer behaviors can be seen here:
https://godbolt.org/z/P7Go8Tr33
Link: https://lore.kernel.org/netdev/20250520205920.2134829-9-anthony.l.nguyen@intel.com [1]
Fixes: 47e36ed784 ("overflow: Fix direct struct member initialization in _DEFINE_FLEX()")
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d3faab9b5a upstream.
If we sanitize error returns, the debug statements need
to come before that so that we don't lose information.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 405b0d6107 ("net: usb: aqc111: fix error handling of usbnet read calls")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 662a9ece32 upstream.
When the USB5744 option is disabled, the onboard_usb driver warns about
unused functions:
drivers/usb/misc/onboard_usb_dev.c:358:12: error: 'onboard_dev_5744_i2c_write_byte' defined but not used [-Werror=unused-function]
358 | static int onboard_dev_5744_i2c_write_byte(struct i2c_client *client, u16 addr, u8 data)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/usb/misc/onboard_usb_dev.c:313:12: error: 'onboard_dev_5744_i2c_read_byte' defined but not used [-Werror=unused-function]
313 | static int onboard_dev_5744_i2c_read_byte(struct i2c_client *client, u16 addr, u8 *data)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Extend the #ifdef block a little further to cover all of these functions.
Ideally we'd use use if(IS_ENABLED()) instead, but that doesn't currently
work because the i2c_transfer() and i2c_smbus_write_word_data() function
declarations are hidden when CONFIG_I2C is disabled.
Fixes: 1143d41922 ("usb: misc: onboard_usb_dev: Fix usb5744 initialization sequence")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250523120947.2170302-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cfdd7752b upstream.
Some of the regulators on the MT6357 PMIC currently reference the
fixed-regulator dt-binding, which enforces the presence of a
regulator-fixed compatible. However since all regulators on the MT6357
PMIC are handled by a single mt6357-regulator driver, probed through
MFD, the compatibles don't serve any purpose. In fact they cause
failures in the DT kselftest since they aren't probed by the fixed
regulator driver as would be expected. Furthermore this is the only
dt-binding in this family like this: mt6359-regulator and
mt6358-regulator don't require those compatibles.
Commit d77e89b7b0 ("arm64: dts: mediatek: mt6357: Drop regulator-fixed
compatibles") removed the compatibles from Devicetree, but missed
updating the binding, which still requires them, introducing dt-binding
errors. Remove the compatible requirement by referencing the plain
regulator dt-binding instead to fix the dt-binding errors.
Fixes: d77e89b7b0 ("arm64: dts: mediatek: mt6357: Drop regulator-fixed compatibles")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://patch.msgid.link/20250514-mt6357-regulator-fixed-compatibles-removal-bindings-v1-1-2421e9cc6cc7@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3cae906e1a upstream.
syzbot reported that a recent patch forgot to unlock rcu
in the error path.
Adopt the convention that netlbl_conn_setattr() is already using.
Fixes: 6e9f2df1c5 ("calipso: Don't call calipso functions for AF_INET sk.")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Link: https://patch.msgid.link/20250604133826.1667664-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e34dbbc85d upstream.
Clear the software event flag in the augmented SS to prevent immediate
repeat of single step trap on return from SIGTRAP handler if the trap
flag (TF) is set without an external debugger attached.
Following is a typical single-stepping flow for a user process:
1) The user process is prepared for single-stepping by setting
RFLAGS.TF = 1.
2) When any instruction in user space completes, a #DB is triggered.
3) The kernel handles the #DB and returns to user space, invoking the
SIGTRAP handler with RFLAGS.TF = 0.
4) After the SIGTRAP handler finishes, the user process performs a
sigreturn syscall, restoring the original state, including
RFLAGS.TF = 1.
5) Goto step 2.
According to the FRED specification:
A) Bit 17 in the augmented SS is designated as the software event
flag, which is set to 1 for FRED event delivery of SYSCALL,
SYSENTER, or INT n.
B) If bit 17 of the augmented SS is 1 and ERETU would result in
RFLAGS.TF = 1, a single-step trap will be pending upon completion
of ERETU.
In step 4) above, the software event flag is set upon the sigreturn
syscall, and its corresponding ERETU would restore RFLAGS.TF = 1.
This combination causes a pending single-step trap upon completion of
ERETU. Therefore, another #DB is triggered before any user space
instruction is executed, which leads to an infinite loop in which the
SIGTRAP handler keeps being invoked on the same user space IP.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Suggested-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Cc:stable@vger.kernel.org
Link: https://lore.kernel.org/all/20250609084054.2083189-2-xin%40zytor.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b68e97871 upstream.
io_bitmap_exit() is invoked from exit_thread() when a task exists or
when a fork fails. In the latter case the exit_thread() cleans up
resources which were allocated during fork().
io_bitmap_exit() invokes task_update_io_bitmap(), which in turn ends up
in tss_update_io_bitmap(). tss_update_io_bitmap() operates on the
current task. If current has TIF_IO_BITMAP set, but no bitmap installed,
tss_update_io_bitmap() crashes with a NULL pointer dereference.
There are two issues, which lead to that problem:
1) io_bitmap_exit() should not invoke task_update_io_bitmap() when
the task, which is cleaned up, is not the current task. That's a
clear indicator for a cleanup after a failed fork().
2) A task should not have TIF_IO_BITMAP set and neither a bitmap
installed nor IOPL emulation level 3 activated.
This happens when a kernel thread is created in the context of
a user space thread, which has TIF_IO_BITMAP set as the thread
flags are copied and the IO bitmap pointer is cleared.
Other than in the failed fork() case this has no impact because
kernel threads including IO workers never return to user space and
therefore never invoke tss_update_io_bitmap().
Cure this by adding the missing cleanups and checks:
1) Prevent io_bitmap_exit() to invoke task_update_io_bitmap() if
the to be cleaned up task is not the current task.
2) Clear TIF_IO_BITMAP in copy_thread() unconditionally. For user
space forks it is set later, when the IO bitmap is inherited in
io_bitmap_share().
For paranoia sake, add a warning into tss_update_io_bitmap() to catch
the case, when that code is invoked with inconsistent state.
Fixes: ea5f1cd7ab ("x86/ioperm: Remove bitmap if all permissions dropped")
Reported-by: syzbot+e2b1803445d236442e54@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/87wmdceom2.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f9bbc1140 upstream.
dm_op hypercalls might come from userspace and pass memory addresses as
parameters. The memory addresses typically correspond to buffers
allocated in userspace to hold extra hypercall parameters.
On ARM, when CONFIG_ARM64_SW_TTBR0_PAN is enabled, they might not be
accessible by Xen, as a result ioreq hypercalls might fail. See the
existing comment in arch/arm64/xen/hypercall.S regarding privcmd_call
for reference.
For privcmd_call, Linux calls uaccess_ttbr0_enable before issuing the
hypercall thanks to commit 9cf09d68b8. We need to do the same for
dm_op. This resolves the problem.
Cc: stable@kernel.org
Fixes: 9cf09d68b8 ("arm64: xen: Enable user access before a privcmd hvc call")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <alpine.DEB.2.22.394.2505121446370.8380@ubuntu-linux-20-04-desktop>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 23be716b1c upstream.
When running fstrim immediately after mounting a V4 filesystem,
the fstrim fails to trim all the free space in the filesystem. It
only trims the first extent in the by-size free space tree in each
AG and then returns. If a second fstrim is then run, it runs
correctly and the entire free space in the filesystem is iterated
and discarded correctly.
The problem lies in the setup of the trim cursor - it assumes that
pag->pagf_longest is valid without either reading the AGF first or
checking if xfs_perag_initialised_agf(pag) is true or not.
As a result, when a filesystem is mounted without reading the AGF
(e.g. a clean mount on a v4 filesystem) and the first operation is a
fstrim call, pag->pagf_longest is zero and so the free extent search
starts at the wrong end of the by-size btree and exits after
discarding the first record in the tree.
Fix this by deferring the initialisation of tcur->count to after
we have locked the AGF and guaranteed that the perag is properly
initialised. We trigger this on tcur->count == 0 after locking the
AGF, as this will only occur on the first call to
xfs_trim_gather_extents() for each AG. If we need to iterate,
tcur->count will be set to the length of the record we need to
restart at, so we can use this to ensure we only sample a valid
pag->pagf_longest value for the iteration.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Bill O'Donnell <bodonnel@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Fixes: 89cfa89960 ("xfs: reduce AGF hold times during fstrim operations")
Cc: <stable@vger.kernel.org> # v6.6
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fc78a7c9c upstream.
When reading a memory mapped buffer the reader page is just swapped out
with the last page written in the write buffer. If the reader page is the
same as the commit buffer (the buffer that is currently being written to)
it was assumed that it should never have missed events. If it does, it
triggers a WARN_ON_ONCE().
But there just happens to be one scenario where this can legitimately
happen. That is on a commit_overrun. A commit overrun is when an interrupt
preempts an event being written to the buffer and then the interrupt adds
so many new events that it fills and wraps the buffer back to the commit.
Any new events would then be dropped and be reported as "missed_events".
In this case, the next page to read is the commit buffer and after the
swap of the reader page, the reader page will be the commit buffer, but
this time there will be missed events and this triggers the following
warning:
------------[ cut here ]------------
WARNING: CPU: 2 PID: 1127 at kernel/trace/ring_buffer.c:7357 ring_buffer_map_get_reader+0x49a/0x780
Modules linked in: kvm_intel kvm irqbypass
CPU: 2 UID: 0 PID: 1127 Comm: trace-cmd Not tainted 6.15.0-rc7-test-00004-g478bc2824b45-dirty #564 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:ring_buffer_map_get_reader+0x49a/0x780
Code: 00 00 00 48 89 fe 48 c1 ee 03 80 3c 2e 00 0f 85 ec 01 00 00 4d 3b a6 a8 00 00 00 0f 85 8a fd ff ff 48 85 c0 0f 84 55 fe ff ff <0f> 0b e9 4e fe ff ff be 08 00 00 00 4c 89 54 24 58 48 89 54 24 50
RSP: 0018:ffff888121787dc0 EFLAGS: 00010002
RAX: 00000000000006a2 RBX: ffff888100062800 RCX: ffffffff8190cb49
RDX: ffff888126934c00 RSI: 1ffff11020200a15 RDI: ffff8881010050a8
RBP: dffffc0000000000 R08: 0000000000000000 R09: ffffed1024d26982
R10: ffff888126934c17 R11: ffff8881010050a8 R12: ffff888126934c00
R13: ffff8881010050b8 R14: ffff888101005000 R15: ffff888126930008
FS: 00007f95c8cd7540(0000) GS:ffff8882b576e000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f95c8de4dc0 CR3: 0000000128452002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __pfx_ring_buffer_map_get_reader+0x10/0x10
tracing_buffers_ioctl+0x283/0x370
__x64_sys_ioctl+0x134/0x190
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f95c8de48db
Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <89> c2 3d 00 f0 ff ff 77 1c 48 8b 44 24 18 64 48 2b 04 25 28 00 00
RSP: 002b:00007ffe037ba110 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffe037bb2b0 RCX: 00007f95c8de48db
RDX: 0000000000000000 RSI: 0000000000005220 RDI: 0000000000000006
RBP: 00007ffe037ba180 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe037bb6f8 R14: 00007f95c9065000 R15: 00005575c7492c90
</TASK>
irq event stamp: 5080
hardirqs last enabled at (5079): [<ffffffff83e0adb0>] _raw_spin_unlock_irqrestore+0x50/0x70
hardirqs last disabled at (5080): [<ffffffff83e0aa83>] _raw_spin_lock_irqsave+0x63/0x70
softirqs last enabled at (4182): [<ffffffff81516122>] handle_softirqs+0x552/0x710
softirqs last disabled at (4159): [<ffffffff815163f7>] __irq_exit_rcu+0x107/0x210
---[ end trace 0000000000000000 ]---
The above was triggered by running on a kernel with both lockdep and KASAN
as well as kmemleak enabled and executing the following command:
# perf record -o perf-test.dat -a -- trace-cmd record --nosplice -e all -p function hackbench 50
With perf interjecting a lot of interrupts and trace-cmd enabling all
events as well as function tracing, with lockdep, KASAN and kmemleak
enabled, it could cause an interrupt preempting an event being written to
add enough events to wrap the buffer. trace-cmd was modified to have
--nosplice use mmap instead of reading the buffer.
The way to differentiate this case from the normal case of there only
being one page written to where the swap of the reader page received that
one page (which is the commit page), check if the tail page is on the
reader page. The difference between the commit page and the tail page is
that the tail page is where new writes go to, and the commit page holds
the first write that hasn't been committed yet. In the case of an
interrupt preempting the write of an event and filling the buffer, it
would move the tail page but not the commit page.
Have the warning only trigger if the tail page is also on the reader page,
and also print out the number of events dropped by a commit overrun as
that can not yet be safely added to the page so that the reader can see
there were events dropped.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250528121555.2066527e@gandalf.local.home
Fixes: fe832be05a ("ring-buffer: Have mmapped ring buffer keep track of missed events")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03ddd7725e upstream.
The migration code used to be able to migrate dirty 9p folios by writing
them back using writepage. When the writepage method was removed,
we neglected to add a migrate_folio method, which means that dirty 9p
folios have been unmovable ever since. This reduced our success at
defragmenting memory on machines which use 9p heavily.
Fixes: 80105ed2fd (9p: Use netfslib read/write_iter)
Cc: stable@vger.kernel.org
Cc: David Howells <dhowells@redhat.com>
Cc: v9fs@lists.linux.dev
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/r/20250402150005.2309458-2-willy@infradead.org
Acked-by: Dominique Martinet <asmadeus@codewreck.org>
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 324d45e53f upstream.
A state check was previously added to tcpm_queue_vdm_unlocked to
prevent a deadlock where the DisplayPort Alt Mode driver would be
executing work and attempting to grab the tcpm_lock while the TCPM
was holding the lock and attempting to unregister the altmode, blocking
on the altmode driver's cancel_work_sync call.
Because the state check isn't protected, there is a small window
where the Alt Mode driver could determine that the TCPM is
in a ready state and attempt to grab the lock while the
TCPM grabs the lock and changes the TCPM state to one that
causes the deadlock. The callstack is provided below:
[110121.667392][ C7] Call trace:
[110121.667396][ C7] __switch_to+0x174/0x338
[110121.667406][ C7] __schedule+0x608/0x9f0
[110121.667414][ C7] schedule+0x7c/0xe8
[110121.667423][ C7] kernfs_drain+0xb0/0x114
[110121.667431][ C7] __kernfs_remove+0x16c/0x20c
[110121.667436][ C7] kernfs_remove_by_name_ns+0x74/0xe8
[110121.667442][ C7] sysfs_remove_group+0x84/0xe8
[110121.667450][ C7] sysfs_remove_groups+0x34/0x58
[110121.667458][ C7] device_remove_groups+0x10/0x20
[110121.667464][ C7] device_release_driver_internal+0x164/0x2e4
[110121.667475][ C7] device_release_driver+0x18/0x28
[110121.667484][ C7] bus_remove_device+0xec/0x118
[110121.667491][ C7] device_del+0x1e8/0x4ac
[110121.667498][ C7] device_unregister+0x18/0x38
[110121.667504][ C7] typec_unregister_altmode+0x30/0x44
[110121.667515][ C7] tcpm_reset_port+0xac/0x370
[110121.667523][ C7] tcpm_snk_detach+0x84/0xb8
[110121.667529][ C7] run_state_machine+0x4c0/0x1b68
[110121.667536][ C7] tcpm_state_machine_work+0x94/0xe4
[110121.667544][ C7] kthread_worker_fn+0x10c/0x244
[110121.667552][ C7] kthread+0x104/0x1d4
[110121.667557][ C7] ret_from_fork+0x10/0x20
[110121.667689][ C7] Workqueue: events dp_altmode_work
[110121.667697][ C7] Call trace:
[110121.667701][ C7] __switch_to+0x174/0x338
[110121.667710][ C7] __schedule+0x608/0x9f0
[110121.667717][ C7] schedule+0x7c/0xe8
[110121.667725][ C7] schedule_preempt_disabled+0x24/0x40
[110121.667733][ C7] __mutex_lock+0x408/0xdac
[110121.667741][ C7] __mutex_lock_slowpath+0x14/0x24
[110121.667748][ C7] mutex_lock+0x40/0xec
[110121.667757][ C7] tcpm_altmode_enter+0x78/0xb4
[110121.667764][ C7] typec_altmode_enter+0xdc/0x10c
[110121.667769][ C7] dp_altmode_work+0x68/0x164
[110121.667775][ C7] process_one_work+0x1e4/0x43c
[110121.667783][ C7] worker_thread+0x25c/0x430
[110121.667789][ C7] kthread+0x104/0x1d4
[110121.667794][ C7] ret_from_fork+0x10/0x20
Change tcpm_queue_vdm_unlocked to queue for tcpm_queue_vdm_work,
which can perform the state check while holding the TCPM lock
while the Alt Mode lock is no longer held. This requires a new
struct to hold the vdm data, altmode_vdm_event.
Fixes: cdc9946ea6 ("usb: typec: tcpm: enforce ready state when queueing alt mode vdm")
Cc: stable <stable@kernel.org>
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20250506232853.1968304-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0736299d09 upstream.
Register read of TCPC_RX_BYTE_CNT returns the total size consisting of:
PD message (pending read) size + 1 Byte for Frame Type (SOP*)
This is validated against the max PD message (`struct pd_message`) size
without accounting for the extra byte for the frame type. Note that the
struct pd_message does not contain a field for the frame_type. This
results in false negatives when the "PD message (pending read)" is equal
to the max PD message size.
Fixes: 6f413b559f ("usb: typec: tcpci_maxim: Chip level TCPC driver")
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Kyle Tso <kyletso@google.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/stable/20250502-b4-new-fix-pd-rx-count-v1-1-e5711ed09b3d%40google.com
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250502-b4-new-fix-pd-rx-count-v1-1-e5711ed09b3d@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 89bb3dc13a upstream.
usb core avoids sending a Set-Interface altsetting 0 request after device
reset, and instead relies on calling usb_disable_interface() and
usb_enable_interface() to flush and reset host-side of those endpoints.
xHCI hosts allocate and set up endpoint ring buffers and host_ep->hcpriv
during usb_hcd_alloc_bandwidth() callback, which in this case is called
before flushing the endpoint in usb_disable_interface().
Call usb_disable_interface() before usb_hcd_alloc_bandwidth() to ensure
URBs are flushed before new ring buffers for the endpoints are allocated.
Otherwise host driver will attempt to find and remove old stale URBs
from a freshly allocated new ringbuffer.
Cc: stable <stable@kernel.org>
Fixes: 4fe0387afa ("USB: don't send Set-Interface after reset")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250514132520.225345-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f4ecdc3526 upstream.
In some cases, there is a small-time gap in which CMD_RING_BUSY can be
cleared by controller but adding command completion event to event ring
will be delayed. As the result driver will return error code.
This behavior has been detected on usbtest driver (test 9) with
configuration including ep1in/ep1out bulk and ep2in/ep2out isoc
endpoint.
Probably this gap occurred because controller was busy with adding some
other events to event ring.
The CMD_RING_BUSY is cleared to '0' when the Command Descriptor has been
executed and not when command completion event has been added to event
ring.
To fix this issue for this test the small delay is sufficient less than
10us) but to make sure the problem doesn't happen again in the future
the patch introduces 10 retries to check with delay about 20us before
returning error code.
Fixes: 3d82904559 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/PH7PR07MB9538AA45362ACCF1B94EE9B7DD96A@PH7PR07MB9538.namprd07.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1143d41922 upstream.
Introduce i2c APIs to read/write for proper configuration register
programming. It ensures that read-modify-write sequence is performed
and reserved bit in Runtime Flags 2 register are not touched.
Also legacy smbus block write inserted an extra count value into the
i2c data stream which breaks the register write on the usb5744.
Switching to new read/write i2c APIs fixes both issues.
Fixes: 6782311d04 ("usb: misc: onboard_usb_dev: add Microchip usb5744 SMBus programming support")
Cc: stable <stable@kernel.org>
Signed-off-by: Jonathan Stroud <jonathan.stroud@amd.com>
Co-developed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1747398760-284021-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b495021a97 upstream.
Commit 1788cf6a91 ("tty: serial: switch from circ_buf to kfifo")
introduced an error in the TX DMA handling for 8250_omap.
When the OMAP_DMA_TX_KICK flag is set, the "skip_byte" is pulled from
the kfifo and emitted directly in order to start the DMA. While the
kfifo is updated, dma->tx_size is not decreased. This leads to
uart_xmit_advance() called in omap_8250_dma_tx_complete() advancing the
kfifo by one too much.
In practice, transmitting N bytes has been seen to result in the last
N-1 bytes being sent repeatedly.
This change fixes the problem by moving all of the dma setup after the
OMAP_DMA_TX_KICK handling and using kfifo_len() instead of the DMA size
for the 4-byte cutoff check. This slightly changes the behaviour at
buffer wraparound, but it still transmits the correct bytes somehow.
Now, the "skip_byte" would no longer be accounted to the stats. As
previously, dma->tx_size included also this skip byte, up->icount.tx was
updated by aforementioned uart_xmit_advance() in
omap_8250_dma_tx_complete(). Fix this by using the uart_fifo_out()
helper instead of bare kfifo_get().
Based on patch by Mans Rullgard <mans@mansr.com>
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Fixes: 1788cf6a91 ("tty: serial: switch from circ_buf to kfifo")
Link: https://lore.kernel.org/all/20250506150748.3162-1-mans@mansr.com/
Reported-by: Mans Rullgard <mans@mansr.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250522053835.3495975-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bd6406fb5 upstream.
During our test, it is found that a warning can be trigger in try_grab_folio
as follow:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1678 at mm/gup.c:147 try_grab_folio+0x106/0x130
Modules linked in:
CPU: 0 UID: 0 PID: 1678 Comm: syz.3.31 Not tainted 6.15.0-rc5 #163 PREEMPT(undef)
RIP: 0010:try_grab_folio+0x106/0x130
Call Trace:
<TASK>
follow_huge_pmd+0x240/0x8e0
follow_pmd_mask.constprop.0.isra.0+0x40b/0x5c0
follow_pud_mask.constprop.0.isra.0+0x14a/0x170
follow_page_mask+0x1c2/0x1f0
__get_user_pages+0x176/0x950
__gup_longterm_locked+0x15b/0x1060
? gup_fast+0x120/0x1f0
gup_fast_fallback+0x17e/0x230
get_user_pages_fast+0x5f/0x80
vmci_host_unlocked_ioctl+0x21c/0xf80
RIP: 0033:0x54d2cd
---[ end trace 0000000000000000 ]---
Digging into the source, context->notify_page may init by get_user_pages_fast
and can be seen in vmci_ctx_unset_notify which will try to put_page. However
get_user_pages_fast is not finished here and lead to following
try_grab_folio warning. The race condition is shown as follow:
cpu0 cpu1
vmci_host_do_set_notify
vmci_host_setup_notify
get_user_pages_fast(uva, 1, FOLL_WRITE, &context->notify_page);
lockless_pages_from_mm
gup_pgd_range
gup_huge_pmd // update &context->notify_page
vmci_host_do_set_notify
vmci_ctx_unset_notify
notify_page = context->notify_page;
if (notify_page)
put_page(notify_page); // page is freed
__gup_longterm_locked
__get_user_pages
follow_trans_huge_pmd
try_grab_folio // warn here
To slove this, use local variable page to make notify_page can be seen
after finish get_user_pages_fast.
Fixes: a1d88436d5 ("VMCI: Fix two UVA mapping bugs")
Cc: stable <stable@kernel.org>
Closes: https://lore.kernel.org/all/e91da589-ad57-3969-d979-879bbd10dddd@huawei.com/
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Link: https://lore.kernel.org/r/20250510033040.901582-1-mawupeng1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit acb3dac280 upstream.
The usbtmc488_ioctl_read_stb function relied on a positive return from
usbtmc_get_stb to reset the srq condition in the driver. The
USBTMC_IOCTL_GET_STB case tested for a positive return to return the stb
to the user.
Commit: <cac01bd178> ("usb: usbtmc: Fix erroneous get_stb ioctl
error returns") changed the return value of usbtmc_get_stb to 0 on
success instead of returning the value of usb_control_msg which is
positive in the normal case. This change caused the function
usbtmc488_ioctl_read_stb and the USBTMC_IOCTL_GET_STB ioctl to no
longer function correctly.
Change the test in usbtmc488_ioctl_read_stb to test for failure
first and return the failure code immediately.
Change the test for the USBTMC_IOCTL_GET_STB ioctl to test for 0
instead of a positive value.
Fixes: cac01bd178 ("usb: usbtmc: Fix erroneous get_stb ioctl error returns")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250521121656.18174-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe8abdd175 upstream.
Commit 29be47fcd6 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup")
changed the driver to expect the device pointer to be passed as the
"context", but in nvmem the context parameter comes from nvmem_config.priv
which is never set - Leading to null pointer exceptions when the device is
accessed.
Fixes: 29be47fcd6 ("nvmem: zynqmp_nvmem: zynqmp_nvmem_probe cleanup")
Cc: stable <stable@kernel.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Tested-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
Link: https://lore.kernel.org/r/20250509122407.11763-3-srini@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f90fff1e15 upstream.
If an exiting non-autoreaping task has already passed exit_notify() and
calls handle_posix_cpu_timers() from IRQ, it can be reaped by its parent
or debugger right after unlock_task_sighand().
If a concurrent posix_cpu_timer_del() runs at that moment, it won't be
able to detect timer->it.cpu.firing != 0: cpu_timer_task_rcu() and/or
lock_task_sighand() will fail.
Add the tsk->exit_state check into run_posix_cpu_timers() to fix this.
This fix is not needed if CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y, because
exit_task_work() is called before exit_notify(). But the check still
makes sense, task_work_add(&tsk->posix_cputimers_work.work) will fail
anyway in this case.
Cc: stable@vger.kernel.org
Reported-by: Benoît Sevens <bsevens@google.com>
Fixes: 0bdd2ed413 ("sched: run_posix_cpu_timers: Don't check ->exit_state, use lock_task_sighand()")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fe7f7ac8e0 upstream.
Update struct hid_descriptor to better reflect the mandatory and
optional parts of the HID Descriptor as per USB HID 1.11 specification.
Note: the kernel currently does not parse any optional HID class
descriptors, only the mandatory report descriptor.
Update all references to member element desc[0] to rpt_desc.
Add test to verify bLength and bNumDescriptors values are valid.
Replace the for loop with direct access to the mandatory HID class
descriptor member for the report descriptor. This eliminates the
possibility of getting an out-of-bounds fault.
Add a warning message if the HID descriptor contains any unsupported
optional HID class descriptors.
Reported-by: syzbot+c52569baf0c843f35495@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c52569baf0c843f35495
Fixes: f043bfc98c ("HID: usbhid: fix out-of-bounds bug")
Cc: stable@vger.kernel.org
Signed-off-by: Terry Junge <linuxhid@cosmicgizmosystems.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
