Commit graph

1,296,507 commits

Author SHA1 Message Date
Paolo Abeni
1a3e4d6a75 Merge branch 'net-provide-smp-threads-for-backlog-napi'
Sebastian Andrzej Siewior says:

====================
net: Provide SMP threads for backlog NAPI

The RPS code and "deferred skb free" both send IPI/ function call
to a remote CPU in which a softirq is raised. This leads to a warning on
PREEMPT_RT because raising softiqrs from function call led to undesired
behaviour in the past. I had duct tape in RT for the "deferred skb free"
and Wander Lairson Costa reported the RPS case.

This series only provides support for SMP threads for backlog NAPI, I
did not attach a patch to make it default and remove the IPI related
code to avoid confusion. I can post it for reference it asked.

The RedHat performance team was so kind to provide some testing here.
The series (with the IPI code removed) has been tested and no regression
vs without the series has been found. For testing iperf3 was used on 25G
interface, provided by mlx5, ix40e or ice driver and RPS was enabled. I
can provide the individual test results if needed.
====================

Link: https://lore.kernel.org/r/20240325074943.289909-1-bigeasy@linutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 12:17:21 +01:00
Sebastian Andrzej Siewior
765b11f8f4 net: Rename rps_lock to backlog_lock.
The rps_lock.*() functions use the inner lock of a sk_buff_head for
locking. This lock is used if RPS is enabled, otherwise the list is
accessed lockless and disabling interrupts is enough for the
synchronisation because it is only accessed CPU local. Not only the list
is protected but also the NAPI state protected.
With the addition of backlog threads, the lock is also needed because of
the cross CPU access even without RPS. The clean up of the defer_list
list is also done via backlog threads (if enabled).

It has been suggested to rename the locking function since it is no
longer just RPS.

Rename the rps_lock*() functions to backlog_lock*().

Suggested-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 12:17:18 +01:00
Sebastian Andrzej Siewior
80d2eefcb4 net: Use backlog-NAPI to clean up the defer_list.
The defer_list is a per-CPU list which is used to free skbs outside of
the socket lock and on the CPU on which they have been allocated.
The list is processed during NAPI callbacks so ideally the list is
cleaned up.
Should the amount of skbs on the list exceed a certain water mark then
the softirq is triggered remotely on the target CPU by invoking a remote
function call. The raise of the softirqs via a remote function call
leads to waking the ksoftirqd on PREEMPT_RT which is undesired.
The backlog-NAPI threads already provide the infrastructure which can be
utilized to perform the cleanup of the defer_list.

The NAPI state is updated with the input_pkt_queue.lock acquired. It
order not to break the state, it is needed to also wake the backlog-NAPI
thread with the lock held. This requires to acquire the use the lock in
rps_lock_irq*() if the backlog-NAPI threads are used even with RPS
disabled.

Move the logic of remotely starting softirqs to clean up the defer_list
into kick_defer_list_purge(). Make sure a lock is held in
rps_lock_irq*() if backlog-NAPI threads are used. Schedule backlog-NAPI
for defer_list cleanup if backlog-NAPI is available.

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 12:17:18 +01:00
Sebastian Andrzej Siewior
dad6b97702 net: Allow to use SMP threads for backlog NAPI.
Backlog NAPI is a per-CPU NAPI struct only (with no device behind it)
used by drivers which don't do NAPI them self, RPS and parts of the
stack which need to avoid recursive deadlocks while processing a packet.

The non-NAPI driver use the CPU local backlog NAPI. If RPS is enabled
then a flow for the skb is computed and based on the flow the skb can be
enqueued on a remote CPU. Scheduling/ raising the softirq (for backlog's
NAPI) on the remote CPU isn't trivial because the softirq is only
scheduled on the local CPU and performed after the hardirq is done.
In order to schedule a softirq on the remote CPU, an IPI is sent to the
remote CPU which schedules the backlog-NAPI on the then local CPU.

On PREEMPT_RT interrupts are force-threaded. The soft interrupts are
raised within the interrupt thread and processed after the interrupt
handler completed still within the context of the interrupt thread. The
softirq is handled in the context where it originated.

With force-threaded interrupts enabled, ksoftirqd is woken up if a
softirq is raised from hardirq context. This is the case if it is raised
from an IPI. Additionally there is a warning on PREEMPT_RT if the
softirq is raised from the idle thread.
This was done for two reasons:
- With threaded interrupts the processing should happen in thread
  context (where it originated) and ksoftirqd is the only thread for
  this context if raised from hardirq. Using the currently running task
  instead would "punish" a random task.
- Once ksoftirqd is active it consumes all further softirqs until it
  stops running. This changed recently and is no longer the case.

Instead of keeping the backlog NAPI in ksoftirqd (in force-threaded/
PREEMPT_RT setups) I am proposing NAPI-threads for backlog.
The "proper" setup with threaded-NAPI is not doable because the threads
are not pinned to an individual CPU and can be modified by the user.
Additionally a dummy network device would have to be assigned. Also
CPU-hotplug has to be considered if additional CPUs show up.
All this can be probably done/ solved but the smpboot-threads already
provide this infrastructure.

Sending UDP packets over loopback expects that the packet is processed
within the call. Delaying it by handing it over to the thread hurts
performance. It is not beneficial to the outcome if the context switch
happens immediately after enqueue or after a while to process a few
packets in a batch.
There is no need to always use the thread if the backlog NAPI is
requested on the local CPU. This restores the loopback throuput. The
performance drops mostly to the same value after enabling RPS on the
loopback comparing the IPI and the tread result.

Create NAPI-threads for backlog if request during boot. The thread runs
the inner loop from napi_threaded_poll(), the wait part is different. It
checks for NAPI_STATE_SCHED (the backlog NAPI can not be disabled).

The NAPI threads for backlog are optional, it has to be enabled via the boot
argument "thread_backlog_napi". It is mandatory for PREEMPT_RT to avoid the
wakeup of ksoftirqd from the IPI.

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 12:17:18 +01:00
Sebastian Andrzej Siewior
56364c9106 net: Remove conditional threaded-NAPI wakeup based on task state.
A NAPI thread is scheduled by first setting NAPI_STATE_SCHED bit. If
successful (the bit was not yet set) then the NAPI_STATE_SCHED_THREADED
is set but only if thread's state is not TASK_INTERRUPTIBLE (is
TASK_RUNNING) followed by task wakeup.

If the task is idle (TASK_INTERRUPTIBLE) then the
NAPI_STATE_SCHED_THREADED bit is not set. The thread is no relying on
the bit but always leaving the wait-loop after returning from schedule()
because there must have been a wakeup.

The smpboot-threads implementation for per-CPU threads requires an
explicit condition and does not support "if we get out of schedule()
then there must be something to do".

Removing this optimisation simplifies the following integration.

Set NAPI_STATE_SCHED_THREADED unconditionally on wakeup and rely on it
in the wait path by removing the `woken' condition.

Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 12:17:18 +01:00
Gustavo A. R. Silva
1d717123bb ALSA: firewire-lib: Avoid -Wflex-array-member-not-at-end warning
Use the `DEFINE_FLEX()` helper for an on-stack definition of a
flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

So, with these changes, fix the following warning:
sound/firewire/amdtp-stream.c:1184:46: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Message-ID: <ZgIsBqoMb7p3fMDr@neat>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-03-26 12:16:50 +01:00
Arnd Bergmann
a24118a8a6 ACPI: APEI: EINJ: mark remove callback as non-__exit
The remove callback of a device is called whenever it is unbound,
which may happen during runtime e.g. through sysfs, so this is not
allowed to be dropped from the binary:

WARNING: modpost: vmlinux: section mismatch in reference: einj_driver+0x8 (section: .data) -> einj_remove (section: .exit.text)
ERROR: modpost: Section mismatches detected.

Remove that annotation.

Fixes: 12fb28ea6b ("EINJ: Add CXL error type support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-03-26 12:16:06 +01:00
Peng Fan
42a31d4410 firmware: arm_scmi: Log the perf domain names in the error paths
Currently, the performance domain names are not logged whenever any
error occurs when processing the OPPs by adding to local data structures
or to the OPP library.

It would be easier to locate the problem if domain name is printed out.
So let us add the performance domain names to the other information
logged already in the error paths.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240322080531.3365016-1-peng.fan@oss.nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-03-26 11:15:55 +00:00
Colin Ian King
9d1848778e drm/panthor: Fix spelling mistake "readyness" -> "readiness"
There is a spelling mistake in a drm_err message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326100219.43989-1-colin.i.king@gmail.com
2024-03-26 11:58:10 +01:00
Boris Brezillon
462a7c0f8e drm/panthor: Fix wrong kernel-doc format in the uAPI header
The kernel doc prefix is /** not /*.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240326093055.411932-1-boris.brezillon@collabora.com
2024-03-26 11:57:39 +01:00
Mostafa Saleh
ec9098d6bf iommu/arm-smmu-v3: Fix access for STE.SHCFG
STE attributes(NSCFG, PRIVCFG, INSTCFG) use value 0 for "Use Icomming",
for some reason SHCFG doesn't follow that, and it is defined as "0b01".

Currently the driver sets SHCFG to Use Incoming for stage-2 and bypass
domains.

However according to the User Manual (ARM IHI 0070 F.b):
	When SMMU_IDR1.ATTR_TYPES_OVR == 0, this field is RES0 and the
	incoming Shareability attribute is used.

This patch adds a condition for writing SHCFG to Use incoming to be
compliant with the architecture, and defines ATTR_TYPE_OVR as a new
feature discovered from IDR1.
This also required to propagate the SMMU through some functions args.

There is no need to add similar condition for the newly introduced function
arm_smmu_get_ste_used() as the values of the STE are the same before and
after any transition, so this will not trigger any change. (we already
do the same for the VMID).

Although this is a misconfiguration from the driver, this has been there
for a long time, so probably no HW running Linux is affected by it.

Reported-by: Will Deacon <will@kernel.org>
Closes: https://lore.kernel.org/all/20240215134952.GA690@willie-the-truck/

Signed-off-by: Mostafa Saleh <smostafa@google.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240323134658.464743-1-smostafa@google.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-03-26 10:47:39 +00:00
Sergey Shtylyov
8c05813df2 MAINTAINERS: split Renesas Ethernet drivers entry
Since the Renesas Ethernet Switch driver was added by Yoshihiro Shimoda,
I started receiving the patches to review for it -- which I was unable to
do, as I don't know this hardware and don't even have the manuals for it.
Fortunately, Shimoda-san has volunteered to be a reviewer for this new
driver, thus let's now split the single entry into 3 per-driver entries,
each with its own reviewer...

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/de0ccc1d-6fc0-583f-4f80-f70e6461d62d@omp.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 11:46:34 +01:00
Jason Gunthorpe
0493e739cc iommu/arm-smmu-v3: Add cpu_to_le64() around STRTAB_STE_0_V
STRTAB_STE_0_V is a CPU value, it needs conversion for sparse to be clean.

The missing annotation was a mistake introduced by splitting the ops out
from the STE writer.

Fixes: 7da51af912 ("iommu/arm-smmu-v3: Make STE programming independent of the callers")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202403011441.5WqGrYjp-lkp@intel.com/
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-98b23ebb0c84+9f-smmu_cputole_jgg@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-03-26 10:44:18 +00:00
Paolo Abeni
26f44b7005 Merge branch 'trace-use-tp_store_addrs-macro'
Jason Xing says:

====================
trace: use TP_STORE_ADDRS macro

Using the macro for other tracepoints use to be more concise.
No functional change.
====================

Link: https://lore.kernel.org/r/20240325034347.19522-1-kerneljasonxing@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 11:12:10 +01:00
Jason Xing
646700ce23 trace: use TP_STORE_ADDRS() macro in inet_sock_set_state()
As the title said, use the macro directly like the patch[1] did
to avoid those duplications. No functional change.

[1]
commit 6a6b0b9914 ("tcp: Avoid preprocessor directives in tracepoint macro args")

Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 11:12:06 +01:00
Jason Xing
a24c855a5e trace: use TP_STORE_ADDRS() macro in inet_sk_error_report()
As the title said, use the macro directly like the patch[1] did
to avoid those duplications. No functional change.

[1]
commit 6a6b0b9914 ("tcp: Avoid preprocessor directives in tracepoint macro args")

Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 11:12:05 +01:00
Jason Xing
b3af9045b4 trace: move to TP_STORE_ADDRS related macro to net_probe_common.h
Put the macro into another standalone file for better extension.
Some tracepoints can use this common part in the future.

Signed-off-by: Jason Xing <kernelxing@tencent.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 11:12:05 +01:00
Alan Stern
80ba43e9f7 USB: core: Fix deadlock in usb_deauthorize_interface()
Among the attribute file callback routines in
drivers/usb/core/sysfs.c, the interface_authorized_store() function is
the only one which acquires a device lock on an ancestor device: It
calls usb_deauthorize_interface(), which locks the interface's parent
USB device.

The will lead to deadlock if another process already owns that lock
and tries to remove the interface, whether through a configuration
change or because the device has been disconnected.  As part of the
removal procedure, device_del() waits for all ongoing sysfs attribute
callbacks to complete.  But usb_deauthorize_interface() can't complete
until the device lock has been released, and the lock won't be
released until the removal has finished.

The mechanism provided by sysfs to prevent this kind of deadlock is
to use the sysfs_break_active_protection() function, which tells sysfs
not to wait for the attribute callback.

Reported-and-tested by: Yue Sun <samsun1006219@gmail.com>
Reported by: xingwei lee <xrivendell7@gmail.com>

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/linux-usb/CAEkJfYO6jRVC8Tfrd_R=cjO0hguhrV31fDPrLrNOOHocDkPoAA@mail.gmail.com/#r
Fixes: 310d2b4124 ("usb: interface authorization: SysFS part of USB interface authorization")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1c37eea1-9f56-4534-b9d8-b443438dc869@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 11:02:47 +01:00
Kyle Tso
17af5050de usb: typec: tcpm: Update PD of Type-C port upon pd_set
The PD of Type-C port needs to be updated in pd_set. Unlink the Type-C
port device to the old PD before linking it to a new one.

Fixes: cd099cde4e ("usb: typec: tcpm: Support multiple capabilities")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240311172306.3911309-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 11:02:18 +01:00
Xu Yang
b63f90487b usb: typec: tcpm: fix double-free issue in tcpm_port_unregister_pd()
When unregister pd capabilitie in tcpm, KASAN will capture below double
-free issue. The root cause is the same capabilitiy will be kfreed twice,
the first time is kfreed by pd_capabilities_release() and the second time
is explicitly kfreed by tcpm_port_unregister_pd().

[    3.988059] BUG: KASAN: double-free in tcpm_port_unregister_pd+0x1a4/0x3dc
[    3.995001] Free of addr ffff0008164d3000 by task kworker/u16:0/10
[    4.001206]
[    4.002712] CPU: 2 PID: 10 Comm: kworker/u16:0 Not tainted 6.8.0-rc5-next-20240220-05616-g52728c567a55 #53
[    4.012402] Hardware name: Freescale i.MX8QXP MEK (DT)
[    4.017569] Workqueue: events_unbound deferred_probe_work_func
[    4.023456] Call trace:
[    4.025920]  dump_backtrace+0x94/0xec
[    4.029629]  show_stack+0x18/0x24
[    4.032974]  dump_stack_lvl+0x78/0x90
[    4.036675]  print_report+0xfc/0x5c0
[    4.040289]  kasan_report_invalid_free+0xa0/0xc0
[    4.044937]  __kasan_slab_free+0x124/0x154
[    4.049072]  kfree+0xb4/0x1e8
[    4.052069]  tcpm_port_unregister_pd+0x1a4/0x3dc
[    4.056725]  tcpm_register_port+0x1dd0/0x2558
[    4.061121]  tcpci_register_port+0x420/0x71c
[    4.065430]  tcpci_probe+0x118/0x2e0

To fix the issue, this will remove kree() from tcpm_port_unregister_pd().

Fixes: cd099cde4e ("usb: typec: tcpm: Support multiple capabilities")
cc: stable@vger.kernel.org
Suggested-by: Aisheng Dong <aisheng.dong@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240311065219.777037-1-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 11:01:58 +01:00
Yongzhi Liu
7c96319692 usb: misc: ljca: Fix double free in error handling path
When auxiliary_device_add() returns error and then calls
auxiliary_device_uninit(), callback function ljca_auxdev_release
calls kfree(auxdev->dev.platform_data) to free the parameter data
of the function ljca_new_client_device. The callers of
ljca_new_client_device shouldn't call kfree() again
in the error handling path to free the platform data.

Fix this by cleaning up the redundant kfree() in all callers and
adding kfree() the passed in platform_data on errors which happen
before auxiliary_device_init() succeeds .

Fixes: acd6199f19 ("usb: Add support for Intel LJCA device")
Cc: stable <stable@kernel.org>
Signed-off-by: Yongzhi Liu <hyperlyzcs@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240311125748.28198-1-hyperlyzcs@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 11:01:23 +01:00
Krishna Kurapati
f5e9bda03a usb: typec: ucsi: Fix race between typec_switch and role_switch
When orientation switch is enabled in ucsi glink, there is a xhci
probe failure seen when booting up in host mode in reverse
orientation.

During bootup the following things happen in multiple drivers:

a) DWC3 controller driver initializes the core in device mode when the
dr_mode is set to DRD. It relies on role_switch call to change role to
host.

b) QMP driver initializes the lanes to TYPEC_ORIENTATION_NORMAL as a
normal routine. It relies on the typec_switch_set call to get notified
of orientation changes.

c) UCSI core reads the UCSI_GET_CONNECTOR_STATUS via the glink and
provides initial role switch to dwc3 controller.

When booting up in host mode with orientation TYPEC_ORIENTATION_REVERSE,
then we see the following things happening in order:

a) UCSI gives initial role as host to dwc3 controller ucsi_register_port.
Upon receiving this notification, the dwc3 core needs to program GCTL from
PRTCAP_DEVICE to PRTCAP_HOST and as part of this change, it asserts GCTL
Core soft reset and waits for it to be  completed before shifting it to
host. Only after the reset is done will the dwc3_host_init be invoked and
xhci is probed. DWC3 controller expects that the usb phy's are stable
during this process i.e., the phy init is already done.

b) During the 100ms wait for GCTL core soft reset, the actual notification
from PPM is received by ucsi_glink via pmic glink for changing role to
host. The pmic_glink_ucsi_notify routine first sends the orientation
change to QMP and then sends role to dwc3 via ucsi framework. This is
happening exactly at the time GCTL core soft reset is being processed.

c) When QMP driver receives typec switch to TYPEC_ORIENTATION_REVERSE, it
then re-programs the phy at the instant GCTL core soft reset has been
asserted by dwc3 controller due to which the QMP PLL lock fails in
qmp_combo_usb_power_on.

d) After the 100ms of GCTL core soft reset is completed, the dwc3 core
goes for initializing the host mode and invokes xhci probe. But at this
point the QMP is non-responsive and as a result, the xhci plat probe fails
during xhci_reset.

Fix this by passing orientation switch to available ucsi instances if
their gpio configuration is available before ucsi_register is invoked so
that by the time, the pmic_glink_ucsi_notify provides typec_switch to QMP,
the lane is already configured and the call would be a NOP thus not racing
with role switch.

Cc: stable@vger.kernel.org
Fixes: c6165ed2f4 ("usb: ucsi: glink: use the connector orientation GPIO to provide switch events")
Suggested-by: Wesley Cheng <quic_wcheng@quicinc.com>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240301040914.458492-1-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 11:00:52 +01:00
Kyle Tso
893cd9469c usb: typec: tcpm: Correct port source pdo array in pd_set callback
In tcpm_pd_set, the array of port source capabilities is port->src_pdo,
not port->snk_pdo.

Fixes: cd099cde4e ("usb: typec: tcpm: Support multiple capabilities")
Cc: stable@vger.kernel.org
Signed-off-by: Kyle Tso <kyletso@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240311144500.3694849-1-kyletso@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 11:00:35 +01:00
Gustavo A. R. Silva
4d69c58ef2 fsnotify: Avoid -Wflex-array-member-not-at-end warning
Use the `DEFINE_FLEX()` helper for an on-stack definition of a
flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

So, with these changes, fix the following warning:
fs/notify/fdinfo.c:45:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <ZgImguNzJBiis9Mj@neat>
2024-03-26 10:53:32 +01:00
Weitao Wang
cd5432c712 USB: UAS: return ENODEV when submit urbs fail with device not attached
In the scenario of entering hibernation with udisk in the system, if the
udisk was gone or resume fail in the thaw phase of hibernation. Its state
will be set to NOTATTACHED. At this point, usb_hub_wq was already freezed
and can't not handle disconnect event. Next, in the poweroff phase of
hibernation, SYNCHRONIZE_CACHE SCSI command will be sent to this udisk
when poweroff this scsi device, which will cause uas_submit_urbs to be
called to submit URB for sense/data/cmd pipe. However, these URBs will
submit fail as device was set to NOTATTACHED state. Then, uas_submit_urbs
will return a value SCSI_MLQUEUE_DEVICE_BUSY to the caller. That will lead
the SCSI layer go into an ugly loop and system fail to go into hibernation.

On the other hand, when we specially check for -ENODEV in function
uas_queuecommand_lck, returning DID_ERROR to SCSI layer will cause device
poweroff fail and system shutdown instead of entering hibernation.

To fix this issue, let uas_submit_urbs to return original generic error
when submitting URB failed. At the same time, we need to translate -ENODEV
to DID_NOT_CONNECT for the SCSI layer.

Suggested-by: Oliver Neukum <oneukum@suse.com>
Cc: stable@vger.kernel.org
Signed-off-by: Weitao Wang <WeitaoWang-oc@zhaoxin.com>
Link: https://lore.kernel.org/r/20240306180814.4897-1-WeitaoWang-oc@zhaoxin.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:50:56 +01:00
Borislav Petkov (AMD)
4969d75dd9 x86/vdso: Fix rethunk patching for vdso-image-x32.o too
In a similar fashion to

  b388e57d46 ("x86/vdso: Fix rethunk patching for vdso-image-{32,64}.o")

annotate vdso-image-x32.o too for objtool so that it gets annotated
properly and the unused return thunk warning doesn't fire.

Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202403251454.23df6278-lkp@intel.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/202403251454.23df6278-lkp@intel.com
2024-03-26 10:47:14 +01:00
Luca Weiss
8e7142817b dt-bindings: usb: qcom,pmic-typec: Add support for the PM7250B PMIC
The PM6150 PMIC has the same Type-C register block as the PM8150B.
Define corresponding compatible string, having the qcom,pm8150b-vbus-reg
as a fallback.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240322-fp4-tcpm-v1-2-c5644099d57b@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:46:51 +01:00
Christophe JAILLET
54ada48481 usb: gadget: u_audio: Use snprintf() instead of sprintf()
In order to be consistent with other s[n]printf() usage in this file,
switch to snprintf() here as well.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5703e697687e4a39059bf90659969ffc86b2cfbd.1711176701.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:45:52 +01:00
Christophe JAILLET
39c34568d7 usb: gadget: u_audio: Use the 2-argument version of strscpy()
In order to be consistent with other strscpy() usage in this file and less
verbose, use the new 2-argument version of strscpy() which computes
auto-magically the size of the destination.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e7fd0ec5a8b37799271c6d74c325cfb980d44181.1711176701.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:45:52 +01:00
Christophe JAILLET
16fac24217 usb: gadget: u_audio: Fix the size of a buffer in a strscpy() call
The size given to strscpy() is not consistent with the destination buffer
that is used. The size is related to 'driver' and the buffer is
'mixername'.

sizeof(card->mixername) is 80 and sizeof(card->driver) is 16, so in
theory this could lead to unneeded string truncation.

In practice, this is not the case because g_audio_setup() has only 2
callers. 'card_name' is either "UAC1_Gadget" or "UAC2_Gadget".

Anyway, using the correct size is cleaner and more future proof.

In order to be less verbose, use the new 2-argument version of strscpy()
which computes auto-magically the size of the destination.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/bf8a9353319566624f653531b80e5caf3d346ba1.1711176700.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:45:52 +01:00
Minas Harutyunyan
f8453bbde0 usb: dwc2: New bitfield definition and programming in GRSTCTL
Added new bitfield GRSTCTL_CLOCK_SWITH_TIMER in GRSTCTL register.
This bitfield applicable HSOTG cores v5.00 or higher and not
applicable to HS/FS IOT devices.
This bitfield must be programmed to 3'b010 if core will be
used in Low-speed and core configured for any HS/FS PHY interface.
This bitfield must be programmed to 3'b111 if core configured
to use either:
- HS PHY interface UTMI or ULPI
- FS PHY any interface

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/0616838cfee958774c9321c6eeeda4be92f900d8.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:53 +01:00
Minas Harutyunyan
4483ef3c16 usb: dwc2: Add hibernation updates for ULPI PHY
Added programmming of ULPI_LATCH_EN_DURING_HIB_ENTRY bit in GPWRDN
register when using ULPI PHY during entry/exit to/from hibernation.
This bit set to 1 during entering to hibernation if ULPI PHY used.
On exiting from hibernation this bit reset to 0.
Applicable for both host and device modes.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e024cb39a7177ec201c873df25ca6365f2e55947.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:53 +01:00
Minas Harutyunyan
535a88dc7d usb: dwc2: New bit definition in GPWRDN register
Added new bit ULPI_LATCH_EN_DURING_HIB_ENTRY in GPWRDN register.
This bit applicable HSOTG cores v5.00 or higher.
Affects Hibernation Entry and Exit sequence (for both Host and Device)
when using ULPI PHY.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/56d05a4f5750aaa58d8c5bab7705814942a985bd.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:53 +01:00
Minas Harutyunyan
7fd22e5bca usb: dwc2: Add eUSB2 PHY disconnect flow support
To support eUSB2 PHY disconnect flow required in Soft disconnect
state set GOTGCTL_EUSB2_DISC_SUPP bit, if applicable.

On Session End Detected interrupt clear PCGCTL_GATEHCLK and
PCGCTL_STOPPCLK bits if eusb2_disc parameter true.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/9d50b83df693cda8c391313e90048df8dd611c04.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:53 +01:00
Minas Harutyunyan
bc5d81b801 usb: dwc2: Add new parameter eusb2_disc
Added new parameter eusb2_disc to list of core parameters which specify
whether eUSB2 PHY disconnect support flow applicable or no.
Set to false as default value and checked core version if set to true.
This parameter applicable in device mode of HSOTG and HS IOT cores
v5.00 or higher.

Added print this parameter in show parameters of debugfs.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/e77cc4312bda797d1ddaa4351d86c65a69c8b926.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:53 +01:00
Minas Harutyunyan
f73220f7fd usb: dwc2: New bit definition in GOTGCTL register
Added new bit EUSB2_DISC_SUPP in GOTGCTL register.
This bit applicable in device mode of HSOTG and HS IOT cores
v5.00 or higher.
This bit used for Device Disconnect detection with eUSB2 PHY.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/21e4401895d586afa23c3fa3d3518bd4b7ebd4d5.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:53 +01:00
Minas Harutyunyan
799d9c2750 usb: dwc2: Add core new versions definition
Added new versions definition for HSOTG core v5.00a and
IOT HS device core v5.00.

Signed-off-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Link: https://lore.kernel.org/r/7fc17fe275a54c8a9e00cd00ffc19e62418c1f84.1708948356.git.Minas.Harutyunyan@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:52 +01:00
Justin Stitt
3b5eac6899 usb: gadget: mv_u3d: replace deprecated strncpy with strscpy
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

Let's opt for the new 2-argument version of strscpy() which guarantees
NUL-termination on the destination buffer and simplifies snytax. The
NUL-padding behavior that strncpy() provides is not required as u3d->eps
is already zero-allocated:
|	u3d->eps = kzalloc(size, GFP_KERNEL);

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240318-strncpy-drivers-usb-gadget-udc-mv_u3d_core-c-v1-1-64f8dcdb7c07@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:32 +01:00
Justin Stitt
c58ab9249d usb: gadget: u_ether: replace deprecated strncpy with strscpy
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.

Let's use the new 2-argument strscpy() as this guarantees
NUL-termination on the destination buffer and also uses the destination
buffer's size to bound the operation.

Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20240318-strncpy-drivers-usb-gadget-function-u_ether-c-v1-1-e8543a1db24a@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:29 +01:00
Luca Weiss
9dc28ea21e usb: typec: ptn36502: switch to DRM_AUX_BRIDGE
Switch to using the new DRM_AUX_BRIDGE helper to create the transparent
DRM bridge device instead of handcoding corresponding functionality.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240315-ptn36502-aux-v1-1-c9d3c828ff2e@fairphone.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:44:14 +01:00
Bo Liu
10cfb14d2a usb: typec: stusb160x: convert to use maple tree register cache
The maple tree register cache is based on a much more modern data structure
than the rbtree cache and makes optimisation choices which are probably
more appropriate for modern systems than those made by the rbtree cache.

Signed-off-by: Bo Liu <liubo03@inspur.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240309071757.3152-1-liubo03@inspur.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:43:52 +01:00
Christophe JAILLET
7a31242735 usb: dwc2: Remove cat_printf()
cat_printf() implements the newly introduced seq_buf API.
Use the latter to save some line of code.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/abf3d0361ea291468d121062207a766b0c3228f2.1710087556.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:43:45 +01:00
Dingyan Li
110000b540 USB: Use EHCI control transfer pid macros instead of constant values.
Macros with good names offer better readability. Besides, also move
the definition to ehci.h.

Signed-off-by: Dingyan Li <18500469033@163.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20240309033709.14604-1-18500469033@163.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:43:35 +01:00
Uwe Kleine-König
1f855c5e68 usb: chipidea: npcm: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.

To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/91311e53e9432ae84d5720485c3b436fb7f06227.1709886922.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:43:26 +01:00
Roy Luo
0ef40f399a USB: gadget: core: create sysfs link between udc and gadget
udc device and gadget device are tightly coupled, yet there's no good
way to corelate the two. Add a sysfs link in udc that points to the
corresponding gadget device.
An example use case: userspace configures a f_midi configfs driver and
bind the udc device, then it tries to locate the corresponding midi
device, which is a child device of the gadget device. The gadget device
that's associated to the udc device has to be identified in order to
index the midi device. Having a sysfs link would make things much
easier.

Signed-off-by: Roy Luo <royluo@google.com>
Link: https://lore.kernel.org/r/20240307030922.3573161-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:43:15 +01:00
Hardik Gajjar
2f550553e2 usb: gadget: f_fs: Add the missing get_alt callback
The Apple CarLife iAP gadget has a descriptor in userspace with two
alternate settings. The host sends the set_alt request to configure
alt_setting 0 or 1, and this is verified by the subsequent get_alt
request.

This patch implements and sets the get_alt callback. Without the
get_alt callback, composite.c abruptly concludes the
USB_REQ_GET/SET_INTERFACE request, assuming only one alt setting
for the endpoint.

unlike the uvc and ncm, f_fs gadget is fully implemented in userspace,
and driver just reset the eps and generate the event. so no additional
adaptaion associated with this change is not required in set_alt callback

Signed-off-by: Hardik Gajjar <hgajjar@de.adit-jv.com>
Link: https://lore.kernel.org/r/20240301124708.120394-1-hgajjar@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:43:01 +01:00
Michael Grzeschik
f7a7f80ccc usb: gadget: uvc: configfs: ensure guid to be valid before set
When setting the guid via configfs it is possible to test if
its value is one of the kernel supported ones by calling
uvc_format_by_guid on it. If the result is NULL, we know the
guid is unsupported and can be ignored.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240221-uvc-gadget-configfs-guid-v1-1-f0678ca62ebb@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:42:28 +01:00
Michael Grzeschik
7a700d8f24 usb: gadget: uvc: fix try format returns on uncompressed formats
When setting uncompressed formats, the values of bytesperline and
sizeimage can already be determined by using the v4l2_fill_pixfmt helper
function. We change the try_fmt function to use the helper instead.

Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Link: https://lore.kernel.org/r/20240221-uvc-gadget-uncompressed-v1-1-f55e97287cae@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-26 10:42:03 +01:00
Bharath SM
75925fafb4 dns_resolver: correct module name in dns resolver documentation
Fix an incorrect module name and sysfs path in dns resolver
documentation.

Signed-off-by: Bharath SM <bharathsm@microsoft.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240324104338.44083-1-bharathsm@microsoft.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-03-26 10:15:36 +01:00
Paul E. McKenney
3186b61812 x86/nmi: Upgrade NMI backtrace stall checks & messages
The commit to improve NMI stall debuggability:

  344da544f1 ("x86/nmi: Print reasons why backtrace NMIs are ignored")

... has shown value, but widespread use has also identified a few
opportunities for improvement.

The systems have (as usual) shown far more creativity than that commit's
author, demonstrating yet again that failing CPUs can do whatever they want.

In addition, the current message format is less friendly than one might
like to those attempting to use these messages to identify failing CPUs.

Therefore, separately flag CPUs that, during the full time that the
stack-backtrace request was waiting, were always in an NMI handler,
were never in an NMI handler, or exited one NMI handler.

Also, split the message identifying the CPU and the time since that CPU's
last NMI-related activity so that a single line identifies the CPU without
any other variable information, greatly reducing the processing overhead
required to identify repeat-offender CPUs.

Co-developed-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/ab4d70c8-c874-42dc-b206-643018922393@paulmck-laptop
2024-03-26 10:07:59 +01:00